arch/arm/boot/dts/am437x-sk-evm.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
   4  */
   5
   6 /* AM437x SK EVM */
   7
   8 /dts-v1/;
   9
  10 #include "am4372.dtsi"
  11 #include <dt-bindings/pinctrl/am43xx.h>
  12 #include <dt-bindings/pwm/pwm.h>
  13 #include <dt-bindings/gpio/gpio.h>
  14 #include <dt-bindings/input/input.h>
  15 #include <dt-bindings/interrupt-controller/irq.h>
  16
  17 / {
  18         model = "TI AM437x SK EVM";
  19         compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
  20
  21         aliases {
  22                 display0 = &lcd0;
  23         };
  24
  25         chosen {
  26                 stdout-path = &uart0;
  27         };
  28
  29         /* fixed 32k external oscillator clock */
  30         clk_32k_rtc: clk_32k_rtc {
  31                 #clock-cells = <0>;
  32                 compatible = "fixed-clock";
  33                 clock-frequency = <32768>;
  34         };
  35
  36         lcd_bl: backlight {
  37                 compatible = "pwm-backlight";
  38                 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
  39                 brightness-levels = <0 51 53 56 62 75 101 152 255>;
  40                 default-brightness-level = <8>;
  41         };
  42
  43         sound {
  44                 compatible = "simple-audio-card";
  45                 simple-audio-card,name = "AM437x-SK-EVM";
  46                 simple-audio-card,widgets =
  47                         "Headphone", "Headphone Jack",
  48                         "Line", "Line In";
  49                 simple-audio-card,routing =
  50                         "Headphone Jack",       "HPLOUT",
  51                         "Headphone Jack",       "HPROUT",
  52                         "LINE1L",               "Line In",
  53                         "LINE1R",               "Line In";
  54                 simple-audio-card,format = "dsp_b";
  55                 simple-audio-card,bitclock-master = <&sound_master>;
  56                 simple-audio-card,frame-master = <&sound_master>;
  57                 simple-audio-card,bitclock-inversion;
  58
  59                 simple-audio-card,cpu {
  60                         sound-dai = <&mcasp1>;
  61                 };
  62
  63                 sound_master: simple-audio-card,codec {
  64                         sound-dai = <&tlv320aic3106>;
  65                         system-clock-frequency = <24000000>;
  66                 };
  67         };
  68
  69         matrix_keypad: matrix_keypad0 {
  70                 compatible = "gpio-matrix-keypad";
  71
  72                 pinctrl-names = "default";
  73                 pinctrl-0 = <&matrix_keypad_pins>;
  74
  75                 debounce-delay-ms = <5>;
  76                 col-scan-delay-us = <5>;
  77
  78                 row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH          /* Bank5, pin5 */
  79                                 &gpio5 6 GPIO_ACTIVE_HIGH>;     /* Bank5, pin6 */
  80
  81                 col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH         /* Bank5, pin13 */
  82                                 &gpio5 4 GPIO_ACTIVE_HIGH>;     /* Bank5, pin4 */
  83
  84                 linux,keymap = <
  85                                 MATRIX_KEY(0, 0, KEY_DOWN)
  86                                 MATRIX_KEY(0, 1, KEY_RIGHT)
  87                                 MATRIX_KEY(1, 0, KEY_LEFT)
  88                                 MATRIX_KEY(1, 1, KEY_UP)
  89                         >;
  90         };
  91
  92         leds {
  93                 compatible = "gpio-leds";
  94
  95                 pinctrl-names = "default";
  96                 pinctrl-0 = <&leds_pins>;
  97
  98                 led0 {
  99                         label = "am437x-sk:red:heartbeat";
 100                         gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 0 */
 101                         linux,default-trigger = "heartbeat";
 102                         default-state = "off";
 103                 };
 104
 105                 led1 {
 106                         label = "am437x-sk:green:mmc1";
 107                         gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 1 */
 108                         linux,default-trigger = "mmc0";
 109                         default-state = "off";
 110                 };
 111
 112                 led2 {
 113                         label = "am437x-sk:blue:cpu0";
 114                         gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 2 */
 115                         linux,default-trigger = "cpu0";
 116                         default-state = "off";
 117                 };
 118
 119                 led3 {
 120                         label = "am437x-sk:blue:usr3";
 121                         gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 3 */
 122                         default-state = "off";
 123                 };
 124         };
 125
 126         lcd0: display {
 127                 compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
 128                 label = "lcd";
 129
 130                 pinctrl-names = "default";
 131                 pinctrl-0 = <&lcd_pins>;
 132
 133                 backlight = <&lcd_bl>;
 134
 135                 enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 136
 137                 panel-timing {
 138                         clock-frequency = <9000000>;
 139                         hactive = <480>;
 140                         vactive = <272>;
 141                         hfront-porch = <2>;
 142                         hback-porch = <2>;
 143                         hsync-len = <41>;
 144                         vfront-porch = <2>;
 145                         vback-porch = <2>;
 146                         vsync-len = <10>;
 147                         hsync-active = <0>;
 148                         vsync-active = <0>;
 149                         de-active = <1>;
 150                         pixelclk-active = <1>;
 151                 };
 152
 153                 port {
 154                         lcd_in: endpoint {
 155                                 remote-endpoint = <&dpi_out>;
 156                         };
 157                 };
 158         };
 159
 160         vmmcwl_fixed: fixedregulator-mmcwl {
 161                 /*
 162                  * WL_EN is not SDIO standard compliant. It is an out of band
 163                  * signal and hard to be dealt with in a standard way by the
 164                  * SDIO core driver.
 165                  * So modelling the WL_EN line as a regulator was a natural
 166                  * choice as the MMC core already deals with MMC supplies.
 167                  */
 168                 compatible = "regulator-fixed";
 169                 regulator-name = "vmmcwl_fixed";
 170                 regulator-min-microvolt = <1800000>;
 171                 regulator-max-microvolt = <1800000>;
 172                 gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
 173                 enable-active-high;
 174         };
 175 };
 176
 177 &am43xx_pinmux {
 178         matrix_keypad_pins: matrix_keypad_pins {
 179                 pinctrl-single,pins = <
 180                         AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7)     /* gpio5_13.gpio5_13 */
 181                         AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7)     /* spi4_sclk.gpio5_4 */
 182                         AM4372_IOPAD(0xa54, PIN_INPUT | MUX_MODE7)      /* spi4_d0.gpio5_5 */
 183                         AM4372_IOPAD(0xa58, PIN_INPUT | MUX_MODE7)      /* spi4_d1.gpio5_5 */
 184                 >;
 185         };
 186
 187         leds_pins: leds_pins {
 188                 pinctrl-single,pins = <
 189                         AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7)     /* uart3_rxd.gpio5_2 */
 190                         AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7)     /* uart3_txd.gpio5_3 */
 191                         AM4372_IOPAD(0xa30, PIN_OUTPUT | MUX_MODE7)     /* uart3_ctsn.gpio5_0 */
 192                         AM4372_IOPAD(0xa34, PIN_OUTPUT | MUX_MODE7)     /* uart3_rtsn.gpio5_1 */
 193                 >;
 194         };
 195
 196         i2c0_pins: i2c0_pins {
 197                 pinctrl-single,pins = <
 198                         AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
 199                         AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 200                 >;
 201         };
 202
 203         i2c1_pins: i2c1_pins {
 204                 pinctrl-single,pins = <
 205                         AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
 206                         AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 207                 >;
 208         };
 209
 210         mmc1_pins: pinmux_mmc1_pins {
 211                 pinctrl-single,pins = <
 212                         AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
 213                         AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
 214                         AM4372_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
 215                         AM4372_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
 216                         AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
 217                         AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
 218                         AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 219                 >;
 220         };
 221
 222         ecap0_pins: backlight_pins {
 223                 pinctrl-single,pins = <
 224                         AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
 225                 >;
 226         };
 227
 228         edt_ft5306_ts_pins: edt_ft5306_ts_pins {
 229                 pinctrl-single,pins = <
 230                         AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7)      /* gpmc_wpn.gpio0_31 */
 231                         AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7)     /* gpmc_be1n.gpio1_28 */
 232                 >;
 233         };
 234
 235         vpfe0_pins_default: vpfe0_pins_default {
 236                 pinctrl-single,pins = <
 237                         AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
 238                         AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
 239                         AM4372_IOPAD(0x9b8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
 240                         AM4372_IOPAD(0x9bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
 241                         AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
 242                         AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
 243                         AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
 244                         AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
 245                         AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
 246                         AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
 247                         AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
 248                         AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
 249                         AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
 250                         AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
 251                         AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
 252                 >;
 253         };
 254
 255         vpfe0_pins_sleep: vpfe0_pins_sleep {
 256                 pinctrl-single,pins = <
 257                         AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 258                         AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 259                         AM4372_IOPAD(0x9b8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 260                         AM4372_IOPAD(0x9bc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 261                         AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 262                         AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 263                         AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 264                         AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 265                         AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 266                         AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 267                         AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 268                         AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 269                         AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 270                         AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 271                         AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 272                 >;
 273         };
 274
 275         cpsw_default: cpsw_default {
 276                 pinctrl-single,pins = <
 277                         /* Slave 1 */
 278                         AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2)     /* mii1_txclk.rmii1_tclk */
 279                         AM4372_IOPAD(0x914, PIN_OUTPUT | MUX_MODE2)     /* mii1_txen.rgmii1_tctl */
 280                         AM4372_IOPAD(0x928, PIN_OUTPUT | MUX_MODE2)     /* mii1_txd0.rgmii1_td0 */
 281                         AM4372_IOPAD(0x924, PIN_OUTPUT | MUX_MODE2)     /* mii1_txd1.rgmii1_td1 */
 282                         AM4372_IOPAD(0x920, PIN_OUTPUT | MUX_MODE2)     /* mii1_txd0.rgmii1_td2 */
 283                         AM4372_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE2)     /* mii1_txd1.rgmii1_td3 */
 284                         AM4372_IOPAD(0x930, PIN_INPUT | MUX_MODE2)      /* mii1_rxclk.rmii1_rclk */
 285                         AM4372_IOPAD(0x918, PIN_INPUT | MUX_MODE2)      /* mii1_rxdv.rgmii1_rctl */
 286                         AM4372_IOPAD(0x940, PIN_INPUT | MUX_MODE2)      /* mii1_rxd0.rgmii1_rd0 */
 287                         AM4372_IOPAD(0x93c, PIN_INPUT | MUX_MODE2)      /* mii1_rxd1.rgmii1_rd1 */
 288                         AM4372_IOPAD(0x938, PIN_INPUT | MUX_MODE2)      /* mii1_rxd0.rgmii1_rd2 */
 289                         AM4372_IOPAD(0x934, PIN_INPUT | MUX_MODE2)      /* mii1_rxd1.rgmii1_rd3 */
 290
 291                         /* Slave 2 */
 292                         AM4372_IOPAD(0x858, PIN_OUTPUT | MUX_MODE2)     /* gpmc_a6.rgmii2_tclk */
 293                         AM4372_IOPAD(0x840, PIN_OUTPUT | MUX_MODE2)     /* gpmc_a0.rgmii2_tctl */
 294                         AM4372_IOPAD(0x854, PIN_OUTPUT | MUX_MODE2)     /* gpmc_a5.rgmii2_td0 */
 295                         AM4372_IOPAD(0x850, PIN_OUTPUT | MUX_MODE2)     /* gpmc_a4.rgmii2_td1 */
 296                         AM4372_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE2)     /* gpmc_a3.rgmii2_td2 */
 297                         AM4372_IOPAD(0x848, PIN_OUTPUT | MUX_MODE2)     /* gpmc_a2.rgmii2_td3 */
 298                         AM4372_IOPAD(0x85c, PIN_INPUT | MUX_MODE2)      /* gpmc_a7.rgmii2_rclk */
 299                         AM4372_IOPAD(0x844, PIN_INPUT | MUX_MODE2)      /* gpmc_a1.rgmii2_rtcl */
 300                         AM4372_IOPAD(0x86c, PIN_INPUT | MUX_MODE2)      /* gpmc_a11.rgmii2_rd0 */
 301                         AM4372_IOPAD(0x868, PIN_INPUT | MUX_MODE2)      /* gpmc_a10.rgmii2_rd1 */
 302                         AM4372_IOPAD(0x864, PIN_INPUT | MUX_MODE2)      /* gpmc_a9.rgmii2_rd2 */
 303                         AM4372_IOPAD(0x860, PIN_INPUT | MUX_MODE2)      /* gpmc_a8.rgmii2_rd3 */
 304                 >;
 305         };
 306
 307         cpsw_sleep: cpsw_sleep {
 308                 pinctrl-single,pins = <
 309                         /* Slave 1 reset value */
 310                         AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 311                         AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
 312                         AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
 313                         AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
 314                         AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
 315                         AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 316                         AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
 317                         AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
 318                         AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 319                         AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 320                         AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
 321                         AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 322
 323                         /* Slave 2 reset value */
 324                         AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
 325                         AM4372_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
 326                         AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
 327                         AM4372_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
 328                         AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 329                         AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
 330                         AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 331                         AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
 332                         AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 333                         AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
 334                         AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
 335                         AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
 336                 >;
 337         };
 338
 339         davinci_mdio_default: davinci_mdio_default {
 340                 pinctrl-single,pins = <
 341                         /* MDIO */
 342                         AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)      /* mdio_data.mdio_data */
 343                         AM4372_IOPAD(0x94c, PIN_OUTPUT | MUX_MODE0)                     /* mdio_clk.mdio_clk */
 344                 >;
 345         };
 346
 347         davinci_mdio_sleep: davinci_mdio_sleep {
 348                 pinctrl-single,pins = <
 349                         /* MDIO reset value */
 350                         AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
 351                         AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 352                 >;
 353         };
 354
 355         dss_pins: dss_pins {
 356                 pinctrl-single,pins = <
 357                         AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)     /* gpmc ad 8 -> DSS DATA 23 */
 358                         AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
 359                         AM4372_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
 360                         AM4372_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
 361                         AM4372_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
 362                         AM4372_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
 363                         AM4372_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
 364                         AM4372_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)     /* gpmc ad 15 -> DSS DATA 16 */
 365                         AM4372_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)     /* DSS DATA 0 */
 366                         AM4372_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
 367                         AM4372_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
 368                         AM4372_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
 369                         AM4372_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
 370                         AM4372_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
 371                         AM4372_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
 372                         AM4372_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
 373                         AM4372_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
 374                         AM4372_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
 375                         AM4372_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
 376                         AM4372_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
 377                         AM4372_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
 378                         AM4372_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
 379                         AM4372_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
 380                         AM4372_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)     /* DSS DATA 15 */
 381                         AM4372_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)     /* DSS VSYNC */
 382                         AM4372_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)     /* DSS HSYNC */
 383                         AM4372_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)     /* DSS PCLK */
 384                         AM4372_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)     /* DSS AC BIAS EN */
 385
 386                 >;
 387         };
 388
 389         qspi_pins: qspi_pins {
 390                 pinctrl-single,pins = <
 391                         AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3)     /* gpmc_csn0.qspi_csn */
 392                         AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)     /* gpmc_csn3.qspi_clk */
 393                         AM4372_IOPAD(0x890, PIN_INPUT | MUX_MODE3)      /* gpmc_advn_ale.qspi_d0 */
 394                         AM4372_IOPAD(0x894, PIN_INPUT | MUX_MODE3)      /* gpmc_oen_ren.qspi_d1 */
 395                         AM4372_IOPAD(0x898, PIN_INPUT | MUX_MODE3)      /* gpmc_wen.qspi_d2 */
 396                         AM4372_IOPAD(0x89c, PIN_INPUT | MUX_MODE3)      /* gpmc_be0n_cle.qspi_d3 */
 397                 >;
 398         };
 399
 400         mcasp1_pins: mcasp1_pins {
 401                 pinctrl-single,pins = <
 402                         AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)     /* mii1_crs.mcasp1_aclkx */
 403                         AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)     /* mii1_rxerr.mcasp1_fsx */
 404                         AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)    /* mii1_col.mcasp1_axr2 */
 405                         AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)     /* rmii1_ref_clk.mcasp1_axr3 */
 406                 >;
 407         };
 408
 409         mcasp1_pins_sleep: mcasp1_pins_sleep {
 410                 pinctrl-single,pins = <
 411                         AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 412                         AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
 413                         AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
 414                         AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 415                 >;
 416         };
 417
 418         lcd_pins: lcd_pins {
 419                 pinctrl-single,pins = <
 420                         AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
 421                 >;
 422         };
 423
 424         usb1_pins: usb1_pins {
 425                 pinctrl-single,pins = <
 426                         AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 427                 >;
 428         };
 429
 430         usb2_pins: usb2_pins {
 431                 pinctrl-single,pins = <
 432                         AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 433                 >;
 434         };
 435
 436         mmc3_pins_default: pinmux_mmc3_pins_default {
 437                 pinctrl-single,pins = <
 438                         AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD21) cam1_data2.mmc2_clk */
 439                         AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE22) cam1_data3.mmc2_cmd */
 440                         AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD22) cam1_data4.mmc2_dat0 */
 441                         AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE23) cam1_data5.mmc2_dat1 */
 442                         AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD23) cam1_data6.mmc2_dat2 */
 443                         AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE24) cam1_data7.mmc2_dat3 */
 444                 >;
 445         };
 446
 447         mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
 448                 pinctrl-single,pins = <
 449                         AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD21) cam1_data2.mmc2_clk */
 450                         AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE22) cam1_data3.mmc2_cmd */
 451                         AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD22) cam1_data4.mmc2_dat0 */
 452                         AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE23) cam1_data5.mmc2_dat1 */
 453                         AM4372_IOPAD(0xa00, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD23) cam1_data6.mmc2_dat2 */
 454                         AM4372_IOPAD(0xa04, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE24) cam1_data7.mmc2_dat3 */
 455                 >;
 456         };
 457
 458         wlan_pins_default: pinmux_wlan_pins_default {
 459                 pinctrl-single,pins = <
 460                         AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)            /* cam1_data8.gpio4_8 WL_EN */
 461                         AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)      /* cam1_wen.gpio4_13 WL_IRQ */
 462                 >;
 463         };
 464
 465         wlan_pins_sleep: pinmux_wlan_pins_sleep {
 466                 pinctrl-single,pins = <
 467                         AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)            /* cam1_data8.gpio4_8 WL_EN */
 468                         AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)      /* cam1_wen.gpio4_13 WL_IRQ */
 469                 >;
 470         };
 471
 472         uart1_bt_pins_default: pinmux_uart1_bt_pins_default {
 473                 pinctrl-single,pins = <
 474                         AM4372_IOPAD(0x980, PIN_INPUT | MUX_MODE0)              /* uart1_rxd.uart1_rxd */
 475                         AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    /* uart1_txd.uart1_txd */
 476                         AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0)       /* uart1_ctsn.uart1_ctsn */
 477                         AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    /* uart1_rtsn.uart1_rtsn */
 478                         AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* cam1_data9.gpio4_7 BT_EN */
 479                 >;
 480         };
 481
 482         uart1_bt_pins_sleep: pinmux_uart1_bt_pins_sleep {
 483                 pinctrl-single,pins = <
 484                         AM4372_IOPAD(0x980, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* uart1_rxd.uart1_rxd */
 485                         AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* uart1_txd.uart1_txd */
 486                         AM4372_IOPAD(0x978, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* uart1_ctsn.uart1_ctsn */
 487                         AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* uart1_rtsn.uart1_rtsn */
 488                         AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE7)      /* cam1_data9.gpio4_7 BT_EN */
 489                 >;
 490         };
 491 };
 492
 493 &i2c0 {
 494         status = "okay";
 495         pinctrl-names = "default";
 496         pinctrl-0 = <&i2c0_pins>;
 497         clock-frequency = <100000>;
 498
 499         tps@24 {
 500                 compatible = "ti,tps65218";
 501                 reg = <0x24>;
 502                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 503                 interrupt-controller;
 504                 #interrupt-cells = <2>;
 505
 506                 dcdc1: regulator-dcdc1 {
 507                         /* VDD_CORE limits min of OPP50 and max of OPP100 */
 508                         regulator-name = "vdd_core";
 509                         regulator-min-microvolt = <912000>;
 510                         regulator-max-microvolt = <1144000>;
 511                         regulator-boot-on;
 512                         regulator-always-on;
 513                 };
 514
 515                 dcdc2: regulator-dcdc2 {
 516                         /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
 517                         regulator-name = "vdd_mpu";
 518                         regulator-min-microvolt = <912000>;
 519                         regulator-max-microvolt = <1378000>;
 520                         regulator-boot-on;
 521                         regulator-always-on;
 522                 };
 523
 524                 dcdc3: regulator-dcdc3 {
 525                         regulator-name = "vdds_ddr";
 526                         regulator-boot-on;
 527                         regulator-always-on;
 528                         regulator-state-mem {
 529                                 regulator-on-in-suspend;
 530                         };
 531                         regulator-state-disk {
 532                                 regulator-off-in-suspend;
 533                         };
 534                 };
 535
 536                 dcdc4: regulator-dcdc4 {
 537                         regulator-name = "v3_3d";
 538                         regulator-min-microvolt = <3300000>;
 539                         regulator-max-microvolt = <3300000>;
 540                         regulator-boot-on;
 541                         regulator-always-on;
 542                 };
 543
 544                 dcdc5: regulator-dcdc5 {
 545                         compatible = "ti,tps65218-dcdc5";
 546                         regulator-name = "v1_0bat";
 547                         regulator-min-microvolt = <1000000>;
 548                         regulator-max-microvolt = <1000000>;
 549                         regulator-boot-on;
 550                         regulator-always-on;
 551                         regulator-state-mem {
 552                                 regulator-on-in-suspend;
 553                         };
 554                 };
 555
 556                 dcdc6: regulator-dcdc6 {
 557                         compatible = "ti,tps65218-dcdc6";
 558                         regulator-name = "v1_8bat";
 559                         regulator-min-microvolt = <1800000>;
 560                         regulator-max-microvolt = <1800000>;
 561                         regulator-boot-on;
 562                         regulator-always-on;
 563                         regulator-state-mem {
 564                                 regulator-on-in-suspend;
 565                         };
 566                 };
 567
 568                 ldo1: regulator-ldo1 {
 569                         regulator-name = "v1_8d";
 570                         regulator-min-microvolt = <1800000>;
 571                         regulator-max-microvolt = <1800000>;
 572                         regulator-boot-on;
 573                         regulator-always-on;
 574                 };
 575
 576                 power-button {
 577                         compatible = "ti,tps65218-pwrbutton";
 578                         status = "okay";
 579                         interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
 580                 };
 581         };
 582
 583         at24@50 {
 584                 compatible = "atmel,24c256";
 585                 pagesize = <64>;
 586                 reg = <0x50>;
 587         };
 588 };
 589
 590 &i2c1 {
 591         status = "okay";
 592         pinctrl-names = "default";
 593         pinctrl-0 = <&i2c1_pins>;
 594         clock-frequency = <400000>;
 595
 596         edt-ft5306@38 {
 597                 status = "okay";
 598                 compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
 599                 pinctrl-names = "default";
 600                 pinctrl-0 = <&edt_ft5306_ts_pins>;
 601
 602                 reg = <0x38>;
 603                 interrupt-parent = <&gpio0>;
 604                 interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 605
 606                 reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 607
 608                 touchscreen-size-x = <480>;
 609                 touchscreen-size-y = <272>;
 610
 611                 wakeup-source;
 612         };
 613
 614         tlv320aic3106: tlv320aic3106@1b {
 615                 #sound-dai-cells = <0>;
 616                 compatible = "ti,tlv320aic3106";
 617                 reg = <0x1b>;
 618                 status = "okay";
 619
 620                 /* Regulators */
 621                 AVDD-supply = <&dcdc4>;
 622                 IOVDD-supply = <&dcdc4>;
 623                 DRVDD-supply = <&dcdc4>;
 624                 DVDD-supply = <&ldo1>;
 625         };
 626
 627         lis331dlh@18 {
 628                 compatible = "st,lis331dlh";
 629                 reg = <0x18>;
 630                 status = "okay";
 631
 632                 Vdd-supply = <&dcdc4>;
 633                 Vdd_IO-supply = <&dcdc4>;
 634                 interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
 635         };
 636 };
 637
 638 &epwmss0 {
 639         status = "okay";
 640 };
 641
 642 &ecap0 {
 643         status = "okay";
 644         pinctrl-names = "default";
 645         pinctrl-0 = <&ecap0_pins>;
 646 };
 647
 648 &gpio0 {
 649         status = "okay";
 650 };
 651
 652 &gpio1 {
 653         status = "okay";
 654 };
 655
 656 &gpio4 {
 657         status = "okay";
 658 };
 659
 660 &gpio5 {
 661         status = "okay";
 662 };
 663
 664 &mmc1 {
 665         status = "okay";
 666         pinctrl-names = "default";
 667         pinctrl-0 = <&mmc1_pins>;
 668
 669         vmmc-supply = <&dcdc4>;
 670         bus-width = <4>;
 671         cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 672 };
 673
 674 &uart1 {
 675         status = "okay";
 676         pinctrl-names = "default", "sleep";
 677         pinctrl-0 = <&uart1_bt_pins_default>;
 678         pinctrl-1 = <&uart1_bt_pins_sleep>;
 679 };
 680
 681 &mmc3 {
 682         status = "okay";
 683         /*
 684          * these are on the crossbar and are outlined in the
 685          * xbar-event-map element
 686          */
 687         dmas = <&edma_xbar 30 0 1>,
 688                 <&edma_xbar 31 0 2>;
 689         dma-names = "tx", "rx";
 690         vmmc-supply = <&vmmcwl_fixed>;
 691         bus-width = <4>;
 692         pinctrl-names = "default", "sleep";
 693         pinctrl-0 = <&mmc3_pins_default>;
 694         pinctrl-1 = <&mmc3_pins_sleep>;
 695         cap-power-off-card;
 696         keep-power-in-suspend;
 697         ti,non-removable;
 698
 699         #address-cells = <1>;
 700         #size-cells = <0>;
 701         wlcore: wlcore@2 {
 702                 compatible = "ti,wl1835";
 703                 pinctrl-names = "default", "sleep";
 704                 pinctrl-0 = <&wlan_pins_default>;
 705                 pinctrl-1 = <&wlan_pins_sleep>;
 706                 reg = <2>;
 707                 interrupt-parent = <&gpio4>;
 708                 interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
 709         };
 710 };
 711
 712 &usb2_phy1 {
 713         status = "okay";
 714 };
 715
 716 &usb1 {
 717         dr_mode = "otg";
 718         status = "okay";
 719         pinctrl-names = "default";
 720         pinctrl-0 = <&usb1_pins>;
 721 };
 722
 723 &usb2_phy2 {
 724         status = "okay";
 725 };
 726
 727 &usb2 {
 728         dr_mode = "host";
 729         status = "okay";
 730         pinctrl-names = "default";
 731         pinctrl-0 = <&usb2_pins>;
 732 };
 733
 734 &qspi {
 735         status = "okay";
 736         pinctrl-names = "default";
 737         pinctrl-0 = <&qspi_pins>;
 738
 739         spi-max-frequency = <48000000>;
 740         m25p80@0 {
 741                 compatible = "mx66l51235l";
 742                 spi-max-frequency = <48000000>;
 743                 reg = <0>;
 744                 spi-cpol;
 745                 spi-cpha;
 746                 spi-tx-bus-width = <1>;
 747                 spi-rx-bus-width = <4>;
 748                 #address-cells = <1>;
 749                 #size-cells = <1>;
 750
 751                 /* MTD partition table.
 752                  * The ROM checks the first 512KiB
 753                  * for a valid file to boot(XIP).
 754                  */
 755                 partition@0 {
 756                         label = "QSPI.U_BOOT";
 757                         reg = <0x00000000 0x000080000>;
 758                 };
 759                 partition@1 {
 760                         label = "QSPI.U_BOOT.backup";
 761                         reg = <0x00080000 0x00080000>;
 762                 };
 763                 partition@2 {
 764                         label = "QSPI.U-BOOT-SPL_OS";
 765                         reg = <0x00100000 0x00010000>;
 766                 };
 767                 partition@3 {
 768                         label = "QSPI.U_BOOT_ENV";
 769                         reg = <0x00110000 0x00010000>;
 770                 };
 771                 partition@4 {
 772                         label = "QSPI.U-BOOT-ENV.backup";
 773                         reg = <0x00120000 0x00010000>;
 774                 };
 775                 partition@5 {
 776                         label = "QSPI.KERNEL";
 777                         reg = <0x00130000 0x0800000>;
 778                 };
 779                 partition@6 {
 780                         label = "QSPI.FILESYSTEM";
 781                         reg = <0x00930000 0x36D0000>;
 782                 };
 783         };
 784 };
 785
 786 &mac {
 787         pinctrl-names = "default", "sleep";
 788         pinctrl-0 = <&cpsw_default>;
 789         pinctrl-1 = <&cpsw_sleep>;
 790         dual_emac = <1>;
 791         status = "okay";
 792 };
 793
 794 &davinci_mdio {
 795         pinctrl-names = "default", "sleep";
 796         pinctrl-0 = <&davinci_mdio_default>;
 797         pinctrl-1 = <&davinci_mdio_sleep>;
 798         status = "okay";
 799
 800         ethphy0: ethernet-phy@4 {
 801                 reg = <4>;
 802         };
 803
 804         ethphy1: ethernet-phy@5 {
 805                 reg = <5>;
 806         };
 807 };
 808
 809 &cpsw_emac0 {
 810         phy-handle = <&ethphy0>;
 811         phy-mode = "rgmii";
 812         dual_emac_res_vlan = <1>;
 813 };
 814
 815 &cpsw_emac1 {
 816         phy-handle = <&ethphy1>;
 817         phy-mode = "rgmii";
 818         dual_emac_res_vlan = <2>;
 819 };
 820
 821 &elm {
 822         status = "okay";
 823 };
 824
 825 &mcasp1 {
 826         #sound-dai-cells = <0>;
 827         pinctrl-names = "default", "sleep";
 828         pinctrl-0 = <&mcasp1_pins>;
 829         pinctrl-1 = <&mcasp1_pins_sleep>;
 830
 831         status = "okay";
 832
 833         op-mode = <0>;
 834         tdm-slots = <2>;
 835         serial-dir = <
 836                 0 0 1 2
 837         >;
 838
 839         tx-num-evt = <1>;
 840         rx-num-evt = <1>;
 841 };
 842
 843 &dss {
 844         status = "okay";
 845
 846         pinctrl-names = "default";
 847         pinctrl-0 = <&dss_pins>;
 848
 849         port {
 850                 dpi_out: endpoint@0 {
 851                         remote-endpoint = <&lcd_in>;
 852                         data-lines = <24>;
 853                 };
 854         };
 855 };
 856
 857 &rtc {
 858         clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
 859         clock-names = "ext-clk", "int-clk";
 860         status = "okay";
 861 };
 862
 863 &wdt {
 864         status = "okay";
 865 };
 866
 867 &cpu {
 868         cpu0-supply = <&dcdc2>;
 869 };
 870
 871 &vpfe0 {
 872         status = "okay";
 873         pinctrl-names = "default", "sleep";
 874         pinctrl-0 = <&vpfe0_pins_default>;
 875         pinctrl-1 = <&vpfe0_pins_sleep>;
 876
 877         /* Camera port */
 878         port {
 879                 vpfe0_ep: endpoint {
 880                         /* remote-endpoint = <&sensor>; add once we have it */
 881                         ti,am437x-vpfe-interface = <0>;
 882                         bus-width = <8>;
 883                         hsync-active = <0>;
 884                         vsync-active = <0>;
 885                 };
 886         };
 887 };