arch/arm/boot/dts/am33xx.dtsi

   1 /*
   2  * Device Tree Source for AM33XX SoC
   3  *
   4  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   5  *
   6  * This file is licensed under the terms of the GNU General Public License
   7  * version 2.  This program is licensed "as is" without any warranty of any
   8  * kind, whether express or implied.
   9  */
  10
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include <dt-bindings/pinctrl/am33xx.h>
  13
  14 / {
  15         compatible = "ti,am33xx";
  16         interrupt-parent = <&intc>;
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19         chosen { };
  20
  21         aliases {
  22                 i2c0 = &i2c0;
  23                 i2c1 = &i2c1;
  24                 i2c2 = &i2c2;
  25                 serial0 = &uart0;
  26                 serial1 = &uart1;
  27                 serial2 = &uart2;
  28                 serial3 = &uart3;
  29                 serial4 = &uart4;
  30                 serial5 = &uart5;
  31                 d_can0 = &dcan0;
  32                 d_can1 = &dcan1;
  33                 usb0 = &usb0;
  34                 usb1 = &usb1;
  35                 phy0 = &usb0_phy;
  36                 phy1 = &usb1_phy;
  37                 ethernet0 = &cpsw_emac0;
  38                 ethernet1 = &cpsw_emac1;
  39                 spi0 = &spi0;
  40                 spi1 = &spi1;
  41         };
  42
  43         cpus {
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46                 cpu@0 {
  47                         compatible = "arm,cortex-a8";
  48                         device_type = "cpu";
  49                         reg = <0>;
  50
  51                         operating-points-v2 = <&cpu0_opp_table>;
  52
  53                         clocks = <&dpll_mpu_ck>;
  54                         clock-names = "cpu";
  55
  56                         clock-latency = <300000>; /* From omap-cpufreq driver */
  57                 };
  58         };
  59
  60         cpu0_opp_table: opp-table {
  61                 compatible = "operating-points-v2-ti-cpu";
  62                 syscon = <&scm_conf>;
  63
  64                 /*
  65                  * The three following nodes are marked with opp-suspend
  66                  * because the can not be enabled simultaneously on a
  67                  * single SoC.
  68                  */
  69                 opp50-300000000 {
  70                         opp-hz = /bits/ 64 <300000000>;
  71                         opp-microvolt = <950000 931000 969000>;
  72                         opp-supported-hw = <0x06 0x0010>;
  73                         opp-suspend;
  74                 };
  75
  76                 opp100-275000000 {
  77                         opp-hz = /bits/ 64 <275000000>;
  78                         opp-microvolt = <1100000 1078000 1122000>;
  79                         opp-supported-hw = <0x01 0x00FF>;
  80                         opp-suspend;
  81                 };
  82
  83                 opp100-300000000 {
  84                         opp-hz = /bits/ 64 <300000000>;
  85                         opp-microvolt = <1100000 1078000 1122000>;
  86                         opp-supported-hw = <0x06 0x0020>;
  87                         opp-suspend;
  88                 };
  89
  90                 opp100-500000000 {
  91                         opp-hz = /bits/ 64 <500000000>;
  92                         opp-microvolt = <1100000 1078000 1122000>;
  93                         opp-supported-hw = <0x01 0xFFFF>;
  94                 };
  95
  96                 opp100-600000000 {
  97                         opp-hz = /bits/ 64 <600000000>;
  98                         opp-microvolt = <1100000 1078000 1122000>;
  99                         opp-supported-hw = <0x06 0x0040>;
 100                 };
 101
 102                 opp120-600000000 {
 103                         opp-hz = /bits/ 64 <600000000>;
 104                         opp-microvolt = <1200000 1176000 1224000>;
 105                         opp-supported-hw = <0x01 0xFFFF>;
 106                 };
 107
 108                 opp120-720000000 {
 109                         opp-hz = /bits/ 64 <720000000>;
 110                         opp-microvolt = <1200000 1176000 1224000>;
 111                         opp-supported-hw = <0x06 0x0080>;
 112                 };
 113
 114                 oppturbo-720000000 {
 115                         opp-hz = /bits/ 64 <720000000>;
 116                         opp-microvolt = <1260000 1234800 1285200>;
 117                         opp-supported-hw = <0x01 0xFFFF>;
 118                 };
 119
 120                 oppturbo-800000000 {
 121                         opp-hz = /bits/ 64 <800000000>;
 122                         opp-microvolt = <1260000 1234800 1285200>;
 123                         opp-supported-hw = <0x06 0x0100>;
 124                 };
 125
 126                 oppnitro-1000000000 {
 127                         opp-hz = /bits/ 64 <1000000000>;
 128                         opp-microvolt = <1325000 1298500 1351500>;
 129                         opp-supported-hw = <0x04 0x0200>;
 130                 };
 131         };
 132
 133         pmu {
 134                 compatible = "arm,cortex-a8-pmu";
 135                 interrupts = <3>;
 136         };
 137
 138         /*
 139          * The soc node represents the soc top level view. It is used for IPs
 140          * that are not memory mapped in the MPU view or for the MPU itself.
 141          */
 142         soc {
 143                 compatible = "ti,omap-infra";
 144                 mpu {
 145                         compatible = "ti,omap3-mpu";
 146                         ti,hwmods = "mpu";
 147                 };
 148         };
 149
 150         /*
 151          * XXX: Use a flat representation of the AM33XX interconnect.
 152          * The real AM33XX interconnect network is quite complex. Since
 153          * it will not bring real advantage to represent that in DT
 154          * for the moment, just use a fake OCP bus entry to represent
 155          * the whole bus hierarchy.
 156          */
 157         ocp {
 158                 compatible = "simple-bus";
 159                 #address-cells = <1>;
 160                 #size-cells = <1>;
 161                 ranges;
 162                 ti,hwmods = "l3_main";
 163
 164                 l4_wkup: l4_wkup@44c00000 {
 165                         compatible = "ti,am3-l4-wkup", "simple-bus";
 166                         #address-cells = <1>;
 167                         #size-cells = <1>;
 168                         ranges = <0 0x44c00000 0x280000>;
 169
 170                         wkup_m3: wkup_m3@100000 {
 171                                 compatible = "ti,am3352-wkup-m3";
 172                                 reg = <0x100000 0x4000>,
 173                                       <0x180000 0x2000>;
 174                                 reg-names = "umem", "dmem";
 175                                 ti,hwmods = "wkup_m3";
 176                                 ti,pm-firmware = "am335x-pm-firmware.elf";
 177                         };
 178
 179                         prcm: prcm@200000 {
 180                                 compatible = "ti,am3-prcm";
 181                                 reg = <0x200000 0x4000>;
 182
 183                                 prcm_clocks: clocks {
 184                                         #address-cells = <1>;
 185                                         #size-cells = <0>;
 186                                 };
 187
 188                                 prcm_clockdomains: clockdomains {
 189                                 };
 190                         };
 191
 192                         scm: scm@210000 {
 193                                 compatible = "ti,am3-scm", "simple-bus";
 194                                 reg = <0x210000 0x2000>;
 195                                 #address-cells = <1>;
 196                                 #size-cells = <1>;
 197                                 #pinctrl-cells = <1>;
 198                                 ranges = <0 0x210000 0x2000>;
 199
 200                                 am33xx_pinmux: pinmux@800 {
 201                                         compatible = "pinctrl-single";
 202                                         reg = <0x800 0x238>;
 203                                         #address-cells = <1>;
 204                                         #size-cells = <0>;
 205                                         #pinctrl-cells = <1>;
 206                                         pinctrl-single,register-width = <32>;
 207                                         pinctrl-single,function-mask = <0x7f>;
 208                                 };
 209
 210                                 scm_conf: scm_conf@0 {
 211                                         compatible = "syscon", "simple-bus";
 212                                         reg = <0x0 0x800>;
 213                                         #address-cells = <1>;
 214                                         #size-cells = <1>;
 215                                         ranges = <0 0 0x800>;
 216
 217                                         scm_clocks: clocks {
 218                                                 #address-cells = <1>;
 219                                                 #size-cells = <0>;
 220                                         };
 221                                 };
 222
 223                                 wkup_m3_ipc: wkup_m3_ipc@1324 {
 224                                         compatible = "ti,am3352-wkup-m3-ipc";
 225                                         reg = <0x1324 0x24>;
 226                                         interrupts = <78>;
 227                                         ti,rproc = <&wkup_m3>;
 228                                         mboxes = <&mailbox &mbox_wkupm3>;
 229                                 };
 230
 231                                 edma_xbar: dma-router@f90 {
 232                                         compatible = "ti,am335x-edma-crossbar";
 233                                         reg = <0xf90 0x40>;
 234                                         #dma-cells = <3>;
 235                                         dma-requests = <32>;
 236                                         dma-masters = <&edma>;
 237                                 };
 238
 239                                 scm_clockdomains: clockdomains {
 240                                 };
 241                         };
 242                 };
 243
 244                 intc: interrupt-controller@48200000 {
 245                         compatible = "ti,am33xx-intc";
 246                         interrupt-controller;
 247                         #interrupt-cells = <1>;
 248                         reg = <0x48200000 0x1000>;
 249                 };
 250
 251                 edma: edma@49000000 {
 252                         compatible = "ti,edma3-tpcc";
 253                         ti,hwmods = "tpcc";
 254                         reg =   <0x49000000 0x10000>;
 255                         reg-names = "edma3_cc";
 256                         interrupts = <12 13 14>;
 257                         interrupt-names = "edma3_ccint", "edma3_mperr",
 258                                           "edma3_ccerrint";
 259                         dma-requests = <64>;
 260                         #dma-cells = <2>;
 261
 262                         ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
 263                                    <&edma_tptc2 0>;
 264
 265                         ti,edma-memcpy-channels = <20 21>;
 266                 };
 267
 268                 edma_tptc0: tptc@49800000 {
 269                         compatible = "ti,edma3-tptc";
 270                         ti,hwmods = "tptc0";
 271                         reg =   <0x49800000 0x100000>;
 272                         interrupts = <112>;
 273                         interrupt-names = "edma3_tcerrint";
 274                 };
 275
 276                 edma_tptc1: tptc@49900000 {
 277                         compatible = "ti,edma3-tptc";
 278                         ti,hwmods = "tptc1";
 279                         reg =   <0x49900000 0x100000>;
 280                         interrupts = <113>;
 281                         interrupt-names = "edma3_tcerrint";
 282                 };
 283
 284                 edma_tptc2: tptc@49a00000 {
 285                         compatible = "ti,edma3-tptc";
 286                         ti,hwmods = "tptc2";
 287                         reg =   <0x49a00000 0x100000>;
 288                         interrupts = <114>;
 289                         interrupt-names = "edma3_tcerrint";
 290                 };
 291
 292                 gpio0: gpio@44e07000 {
 293                         compatible = "ti,omap4-gpio";
 294                         ti,hwmods = "gpio1";
 295                         gpio-controller;
 296                         #gpio-cells = <2>;
 297                         interrupt-controller;
 298                         #interrupt-cells = <2>;
 299                         reg = <0x44e07000 0x1000>;
 300                         interrupts = <96>;
 301                 };
 302
 303                 gpio1: gpio@4804c000 {
 304                         compatible = "ti,omap4-gpio";
 305                         ti,hwmods = "gpio2";
 306                         gpio-controller;
 307                         #gpio-cells = <2>;
 308                         interrupt-controller;
 309                         #interrupt-cells = <2>;
 310                         reg = <0x4804c000 0x1000>;
 311                         interrupts = <98>;
 312                 };
 313
 314                 gpio2: gpio@481ac000 {
 315                         compatible = "ti,omap4-gpio";
 316                         ti,hwmods = "gpio3";
 317                         gpio-controller;
 318                         #gpio-cells = <2>;
 319                         interrupt-controller;
 320                         #interrupt-cells = <2>;
 321                         reg = <0x481ac000 0x1000>;
 322                         interrupts = <32>;
 323                 };
 324
 325                 gpio3: gpio@481ae000 {
 326                         compatible = "ti,omap4-gpio";
 327                         ti,hwmods = "gpio4";
 328                         gpio-controller;
 329                         #gpio-cells = <2>;
 330                         interrupt-controller;
 331                         #interrupt-cells = <2>;
 332                         reg = <0x481ae000 0x1000>;
 333                         interrupts = <62>;
 334                 };
 335
 336                 uart0: serial@44e09000 {
 337                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 338                         ti,hwmods = "uart1";
 339                         clock-frequency = <48000000>;
 340                         reg = <0x44e09000 0x2000>;
 341                         interrupts = <72>;
 342                         status = "disabled";
 343                         dmas = <&edma 26 0>, <&edma 27 0>;
 344                         dma-names = "tx", "rx";
 345                 };
 346
 347                 uart1: serial@48022000 {
 348                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 349                         ti,hwmods = "uart2";
 350                         clock-frequency = <48000000>;
 351                         reg = <0x48022000 0x2000>;
 352                         interrupts = <73>;
 353                         status = "disabled";
 354                         dmas = <&edma 28 0>, <&edma 29 0>;
 355                         dma-names = "tx", "rx";
 356                 };
 357
 358                 uart2: serial@48024000 {
 359                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 360                         ti,hwmods = "uart3";
 361                         clock-frequency = <48000000>;
 362                         reg = <0x48024000 0x2000>;
 363                         interrupts = <74>;
 364                         status = "disabled";
 365                         dmas = <&edma 30 0>, <&edma 31 0>;
 366                         dma-names = "tx", "rx";
 367                 };
 368
 369                 uart3: serial@481a6000 {
 370                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 371                         ti,hwmods = "uart4";
 372                         clock-frequency = <48000000>;
 373                         reg = <0x481a6000 0x2000>;
 374                         interrupts = <44>;
 375                         status = "disabled";
 376                 };
 377
 378                 uart4: serial@481a8000 {
 379                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 380                         ti,hwmods = "uart5";
 381                         clock-frequency = <48000000>;
 382                         reg = <0x481a8000 0x2000>;
 383                         interrupts = <45>;
 384                         status = "disabled";
 385                 };
 386
 387                 uart5: serial@481aa000 {
 388                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 389                         ti,hwmods = "uart6";
 390                         clock-frequency = <48000000>;
 391                         reg = <0x481aa000 0x2000>;
 392                         interrupts = <46>;
 393                         status = "disabled";
 394                 };
 395
 396                 i2c0: i2c@44e0b000 {
 397                         compatible = "ti,omap4-i2c";
 398                         #address-cells = <1>;
 399                         #size-cells = <0>;
 400                         ti,hwmods = "i2c1";
 401                         reg = <0x44e0b000 0x1000>;
 402                         interrupts = <70>;
 403                         status = "disabled";
 404                 };
 405
 406                 i2c1: i2c@4802a000 {
 407                         compatible = "ti,omap4-i2c";
 408                         #address-cells = <1>;
 409                         #size-cells = <0>;
 410                         ti,hwmods = "i2c2";
 411                         reg = <0x4802a000 0x1000>;
 412                         interrupts = <71>;
 413                         status = "disabled";
 414                 };
 415
 416                 i2c2: i2c@4819c000 {
 417                         compatible = "ti,omap4-i2c";
 418                         #address-cells = <1>;
 419                         #size-cells = <0>;
 420                         ti,hwmods = "i2c3";
 421                         reg = <0x4819c000 0x1000>;
 422                         interrupts = <30>;
 423                         status = "disabled";
 424                 };
 425
 426                 mmc1: mmc@48060000 {
 427                         compatible = "ti,omap4-hsmmc";
 428                         ti,hwmods = "mmc1";
 429                         ti,dual-volt;
 430                         ti,needs-special-reset;
 431                         ti,needs-special-hs-handling;
 432                         dmas = <&edma_xbar 24 0 0
 433                                 &edma_xbar 25 0 0>;
 434                         dma-names = "tx", "rx";
 435                         interrupts = <64>;
 436                         reg = <0x48060000 0x1000>;
 437                         status = "disabled";
 438                 };
 439
 440                 mmc2: mmc@481d8000 {
 441                         compatible = "ti,omap4-hsmmc";
 442                         ti,hwmods = "mmc2";
 443                         ti,needs-special-reset;
 444                         dmas = <&edma 2 0
 445                                 &edma 3 0>;
 446                         dma-names = "tx", "rx";
 447                         interrupts = <28>;
 448                         reg = <0x481d8000 0x1000>;
 449                         status = "disabled";
 450                 };
 451
 452                 mmc3: mmc@47810000 {
 453                         compatible = "ti,omap4-hsmmc";
 454                         ti,hwmods = "mmc3";
 455                         ti,needs-special-reset;
 456                         interrupts = <29>;
 457                         reg = <0x47810000 0x1000>;
 458                         status = "disabled";
 459                 };
 460
 461                 hwspinlock: spinlock@480ca000 {
 462                         compatible = "ti,omap4-hwspinlock";
 463                         reg = <0x480ca000 0x1000>;
 464                         ti,hwmods = "spinlock";
 465                         #hwlock-cells = <1>;
 466                 };
 467
 468                 wdt2: wdt@44e35000 {
 469                         compatible = "ti,omap3-wdt";
 470                         ti,hwmods = "wd_timer2";
 471                         reg = <0x44e35000 0x1000>;
 472                         interrupts = <91>;
 473                 };
 474
 475                 dcan0: can@481cc000 {
 476                         compatible = "ti,am3352-d_can";
 477                         ti,hwmods = "d_can0";
 478                         reg = <0x481cc000 0x2000>;
 479                         clocks = <&dcan0_fck>;
 480                         clock-names = "fck";
 481                         syscon-raminit = <&scm_conf 0x644 0>;
 482                         interrupts = <52>;
 483                         status = "disabled";
 484                 };
 485
 486                 dcan1: can@481d0000 {
 487                         compatible = "ti,am3352-d_can";
 488                         ti,hwmods = "d_can1";
 489                         reg = <0x481d0000 0x2000>;
 490                         clocks = <&dcan1_fck>;
 491                         clock-names = "fck";
 492                         syscon-raminit = <&scm_conf 0x644 1>;
 493                         interrupts = <55>;
 494                         status = "disabled";
 495                 };
 496
 497                 mailbox: mailbox@480C8000 {
 498                         compatible = "ti,omap4-mailbox";
 499                         reg = <0x480C8000 0x200>;
 500                         interrupts = <77>;
 501                         ti,hwmods = "mailbox";
 502                         #mbox-cells = <1>;
 503                         ti,mbox-num-users = <4>;
 504                         ti,mbox-num-fifos = <8>;
 505                         mbox_wkupm3: wkup_m3 {
 506                                 ti,mbox-send-noirq;
 507                                 ti,mbox-tx = <0 0 0>;
 508                                 ti,mbox-rx = <0 0 3>;
 509                         };
 510                 };
 511
 512                 timer1: timer@44e31000 {
 513                         compatible = "ti,am335x-timer-1ms";
 514                         reg = <0x44e31000 0x400>;
 515                         interrupts = <67>;
 516                         ti,hwmods = "timer1";
 517                         ti,timer-alwon;
 518                 };
 519
 520                 timer2: timer@48040000 {
 521                         compatible = "ti,am335x-timer";
 522                         reg = <0x48040000 0x400>;
 523                         interrupts = <68>;
 524                         ti,hwmods = "timer2";
 525                 };
 526
 527                 timer3: timer@48042000 {
 528                         compatible = "ti,am335x-timer";
 529                         reg = <0x48042000 0x400>;
 530                         interrupts = <69>;
 531                         ti,hwmods = "timer3";
 532                 };
 533
 534                 timer4: timer@48044000 {
 535                         compatible = "ti,am335x-timer";
 536                         reg = <0x48044000 0x400>;
 537                         interrupts = <92>;
 538                         ti,hwmods = "timer4";
 539                         ti,timer-pwm;
 540                 };
 541
 542                 timer5: timer@48046000 {
 543                         compatible = "ti,am335x-timer";
 544                         reg = <0x48046000 0x400>;
 545                         interrupts = <93>;
 546                         ti,hwmods = "timer5";
 547                         ti,timer-pwm;
 548                 };
 549
 550                 timer6: timer@48048000 {
 551                         compatible = "ti,am335x-timer";
 552                         reg = <0x48048000 0x400>;
 553                         interrupts = <94>;
 554                         ti,hwmods = "timer6";
 555                         ti,timer-pwm;
 556                 };
 557
 558                 timer7: timer@4804a000 {
 559                         compatible = "ti,am335x-timer";
 560                         reg = <0x4804a000 0x400>;
 561                         interrupts = <95>;
 562                         ti,hwmods = "timer7";
 563                         ti,timer-pwm;
 564                 };
 565
 566                 rtc: rtc@44e3e000 {
 567                         compatible = "ti,am3352-rtc", "ti,da830-rtc";
 568                         reg = <0x44e3e000 0x1000>;
 569                         interrupts = <75
 570                                       76>;
 571                         ti,hwmods = "rtc";
 572                         clocks = <&clkdiv32k_ick>;
 573                         clock-names = "int-clk";
 574                 };
 575
 576                 spi0: spi@48030000 {
 577                         compatible = "ti,omap4-mcspi";
 578                         #address-cells = <1>;
 579                         #size-cells = <0>;
 580                         reg = <0x48030000 0x400>;
 581                         interrupts = <65>;
 582                         ti,spi-num-cs = <2>;
 583                         ti,hwmods = "spi0";
 584                         dmas = <&edma 16 0
 585                                 &edma 17 0
 586                                 &edma 18 0
 587                                 &edma 19 0>;
 588                         dma-names = "tx0", "rx0", "tx1", "rx1";
 589                         status = "disabled";
 590                 };
 591
 592                 spi1: spi@481a0000 {
 593                         compatible = "ti,omap4-mcspi";
 594                         #address-cells = <1>;
 595                         #size-cells = <0>;
 596                         reg = <0x481a0000 0x400>;
 597                         interrupts = <125>;
 598                         ti,spi-num-cs = <2>;
 599                         ti,hwmods = "spi1";
 600                         dmas = <&edma 42 0
 601                                 &edma 43 0
 602                                 &edma 44 0
 603                                 &edma 45 0>;
 604                         dma-names = "tx0", "rx0", "tx1", "rx1";
 605                         status = "disabled";
 606                 };
 607
 608                 usb: usb@47400000 {
 609                         compatible = "ti,am33xx-usb";
 610                         reg = <0x47400000 0x1000>;
 611                         ranges;
 612                         #address-cells = <1>;
 613                         #size-cells = <1>;
 614                         ti,hwmods = "usb_otg_hs";
 615                         status = "disabled";
 616
 617                         usb_ctrl_mod: control@44e10620 {
 618                                 compatible = "ti,am335x-usb-ctrl-module";
 619                                 reg = <0x44e10620 0x10
 620                                         0x44e10648 0x4>;
 621                                 reg-names = "phy_ctrl", "wakeup";
 622                                 status = "disabled";
 623                         };
 624
 625                         usb0_phy: usb-phy@47401300 {
 626                                 compatible = "ti,am335x-usb-phy";
 627                                 reg = <0x47401300 0x100>;
 628                                 reg-names = "phy";
 629                                 status = "disabled";
 630                                 ti,ctrl_mod = <&usb_ctrl_mod>;
 631                         };
 632
 633                         usb0: usb@47401000 {
 634                                 compatible = "ti,musb-am33xx";
 635                                 status = "disabled";
 636                                 reg = <0x47401400 0x400
 637                                         0x47401000 0x200>;
 638                                 reg-names = "mc", "control";
 639
 640                                 interrupts = <18>;
 641                                 interrupt-names = "mc";
 642                                 dr_mode = "otg";
 643                                 mentor,multipoint = <1>;
 644                                 mentor,num-eps = <16>;
 645                                 mentor,ram-bits = <12>;
 646                                 mentor,power = <500>;
 647                                 phys = <&usb0_phy>;
 648
 649                                 dmas = <&cppi41dma  0 0 &cppi41dma  1 0
 650                                         &cppi41dma  2 0 &cppi41dma  3 0
 651                                         &cppi41dma  4 0 &cppi41dma  5 0
 652                                         &cppi41dma  6 0 &cppi41dma  7 0
 653                                         &cppi41dma  8 0 &cppi41dma  9 0
 654                                         &cppi41dma 10 0 &cppi41dma 11 0
 655                                         &cppi41dma 12 0 &cppi41dma 13 0
 656                                         &cppi41dma 14 0 &cppi41dma  0 1
 657                                         &cppi41dma  1 1 &cppi41dma  2 1
 658                                         &cppi41dma  3 1 &cppi41dma  4 1
 659                                         &cppi41dma  5 1 &cppi41dma  6 1
 660                                         &cppi41dma  7 1 &cppi41dma  8 1
 661                                         &cppi41dma  9 1 &cppi41dma 10 1
 662                                         &cppi41dma 11 1 &cppi41dma 12 1
 663                                         &cppi41dma 13 1 &cppi41dma 14 1>;
 664                                 dma-names =
 665                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 666                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 667                                         "rx14", "rx15",
 668                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 669                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 670                                         "tx14", "tx15";
 671                         };
 672
 673                         usb1_phy: usb-phy@47401b00 {
 674                                 compatible = "ti,am335x-usb-phy";
 675                                 reg = <0x47401b00 0x100>;
 676                                 reg-names = "phy";
 677                                 status = "disabled";
 678                                 ti,ctrl_mod = <&usb_ctrl_mod>;
 679                         };
 680
 681                         usb1: usb@47401800 {
 682                                 compatible = "ti,musb-am33xx";
 683                                 status = "disabled";
 684                                 reg = <0x47401c00 0x400
 685                                         0x47401800 0x200>;
 686                                 reg-names = "mc", "control";
 687                                 interrupts = <19>;
 688                                 interrupt-names = "mc";
 689                                 dr_mode = "otg";
 690                                 mentor,multipoint = <1>;
 691                                 mentor,num-eps = <16>;
 692                                 mentor,ram-bits = <12>;
 693                                 mentor,power = <500>;
 694                                 phys = <&usb1_phy>;
 695
 696                                 dmas = <&cppi41dma 15 0 &cppi41dma 16 0
 697                                         &cppi41dma 17 0 &cppi41dma 18 0
 698                                         &cppi41dma 19 0 &cppi41dma 20 0
 699                                         &cppi41dma 21 0 &cppi41dma 22 0
 700                                         &cppi41dma 23 0 &cppi41dma 24 0
 701                                         &cppi41dma 25 0 &cppi41dma 26 0
 702                                         &cppi41dma 27 0 &cppi41dma 28 0
 703                                         &cppi41dma 29 0 &cppi41dma 15 1
 704                                         &cppi41dma 16 1 &cppi41dma 17 1
 705                                         &cppi41dma 18 1 &cppi41dma 19 1
 706                                         &cppi41dma 20 1 &cppi41dma 21 1
 707                                         &cppi41dma 22 1 &cppi41dma 23 1
 708                                         &cppi41dma 24 1 &cppi41dma 25 1
 709                                         &cppi41dma 26 1 &cppi41dma 27 1
 710                                         &cppi41dma 28 1 &cppi41dma 29 1>;
 711                                 dma-names =
 712                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 713                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 714                                         "rx14", "rx15",
 715                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 716                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 717                                         "tx14", "tx15";
 718                         };
 719
 720                         cppi41dma: dma-controller@47402000 {
 721                                 compatible = "ti,am3359-cppi41";
 722                                 reg =  <0x47400000 0x1000
 723                                         0x47402000 0x1000
 724                                         0x47403000 0x1000
 725                                         0x47404000 0x4000>;
 726                                 reg-names = "glue", "controller", "scheduler", "queuemgr";
 727                                 interrupts = <17>;
 728                                 interrupt-names = "glue";
 729                                 #dma-cells = <2>;
 730                                 #dma-channels = <30>;
 731                                 #dma-requests = <256>;
 732                                 status = "disabled";
 733                         };
 734                 };
 735
 736                 epwmss0: epwmss@48300000 {
 737                         compatible = "ti,am33xx-pwmss";
 738                         reg = <0x48300000 0x10>;
 739                         ti,hwmods = "epwmss0";
 740                         #address-cells = <1>;
 741                         #size-cells = <1>;
 742                         status = "disabled";
 743                         ranges = <0x48300100 0x48300100 0x80   /* ECAP */
 744                                   0x48300180 0x48300180 0x80   /* EQEP */
 745                                   0x48300200 0x48300200 0x80>; /* EHRPWM */
 746
 747                         ecap0: ecap@48300100 {
 748                                 compatible = "ti,am3352-ecap",
 749                                              "ti,am33xx-ecap";
 750                                 #pwm-cells = <3>;
 751                                 reg = <0x48300100 0x80>;
 752                                 clocks = <&l4ls_gclk>;
 753                                 clock-names = "fck";
 754                                 interrupts = <31>;
 755                                 interrupt-names = "ecap0";
 756                                 status = "disabled";
 757                         };
 758
 759                         ehrpwm0: pwm@48300200 {
 760                                 compatible = "ti,am3352-ehrpwm",
 761                                              "ti,am33xx-ehrpwm";
 762                                 #pwm-cells = <3>;
 763                                 reg = <0x48300200 0x80>;
 764                                 clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
 765                                 clock-names = "tbclk", "fck";
 766                                 status = "disabled";
 767                         };
 768                 };
 769
 770                 epwmss1: epwmss@48302000 {
 771                         compatible = "ti,am33xx-pwmss";
 772                         reg = <0x48302000 0x10>;
 773                         ti,hwmods = "epwmss1";
 774                         #address-cells = <1>;
 775                         #size-cells = <1>;
 776                         status = "disabled";
 777                         ranges = <0x48302100 0x48302100 0x80   /* ECAP */
 778                                   0x48302180 0x48302180 0x80   /* EQEP */
 779                                   0x48302200 0x48302200 0x80>; /* EHRPWM */
 780
 781                         ecap1: ecap@48302100 {
 782                                 compatible = "ti,am3352-ecap",
 783                                              "ti,am33xx-ecap";
 784                                 #pwm-cells = <3>;
 785                                 reg = <0x48302100 0x80>;
 786                                 clocks = <&l4ls_gclk>;
 787                                 clock-names = "fck";
 788                                 interrupts = <47>;
 789                                 interrupt-names = "ecap1";
 790                                 status = "disabled";
 791                         };
 792
 793                         ehrpwm1: pwm@48302200 {
 794                                 compatible = "ti,am3352-ehrpwm",
 795                                              "ti,am33xx-ehrpwm";
 796                                 #pwm-cells = <3>;
 797                                 reg = <0x48302200 0x80>;
 798                                 clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
 799                                 clock-names = "tbclk", "fck";
 800                                 status = "disabled";
 801                         };
 802                 };
 803
 804                 epwmss2: epwmss@48304000 {
 805                         compatible = "ti,am33xx-pwmss";
 806                         reg = <0x48304000 0x10>;
 807                         ti,hwmods = "epwmss2";
 808                         #address-cells = <1>;
 809                         #size-cells = <1>;
 810                         status = "disabled";
 811                         ranges = <0x48304100 0x48304100 0x80   /* ECAP */
 812                                   0x48304180 0x48304180 0x80   /* EQEP */
 813                                   0x48304200 0x48304200 0x80>; /* EHRPWM */
 814
 815                         ecap2: ecap@48304100 {
 816                                 compatible = "ti,am3352-ecap",
 817                                              "ti,am33xx-ecap";
 818                                 #pwm-cells = <3>;
 819                                 reg = <0x48304100 0x80>;
 820                                 clocks = <&l4ls_gclk>;
 821                                 clock-names = "fck";
 822                                 interrupts = <61>;
 823                                 interrupt-names = "ecap2";
 824                                 status = "disabled";
 825                         };
 826
 827                         ehrpwm2: pwm@48304200 {
 828                                 compatible = "ti,am3352-ehrpwm",
 829                                              "ti,am33xx-ehrpwm";
 830                                 #pwm-cells = <3>;
 831                                 reg = <0x48304200 0x80>;
 832                                 clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
 833                                 clock-names = "tbclk", "fck";
 834                                 status = "disabled";
 835                         };
 836                 };
 837
 838                 mac: ethernet@4a100000 {
 839                         compatible = "ti,am335x-cpsw","ti,cpsw";
 840                         ti,hwmods = "cpgmac0";
 841                         clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
 842                         clock-names = "fck", "cpts";
 843                         cpdma_channels = <8>;
 844                         ale_entries = <1024>;
 845                         bd_ram_size = <0x2000>;
 846                         mac_control = <0x20>;
 847                         slaves = <2>;
 848                         active_slave = <0>;
 849                         cpts_clock_mult = <0x80000000>;
 850                         cpts_clock_shift = <29>;
 851                         reg = <0x4a100000 0x800
 852                                0x4a101200 0x100>;
 853                         #address-cells = <1>;
 854                         #size-cells = <1>;
 855                         /*
 856                          * c0_rx_thresh_pend
 857                          * c0_rx_pend
 858                          * c0_tx_pend
 859                          * c0_misc_pend
 860                          */
 861                         interrupts = <40 41 42 43>;
 862                         ranges;
 863                         syscon = <&scm_conf>;
 864                         status = "disabled";
 865
 866                         davinci_mdio: mdio@4a101000 {
 867                                 compatible = "ti,cpsw-mdio","ti,davinci_mdio";
 868                                 #address-cells = <1>;
 869                                 #size-cells = <0>;
 870                                 ti,hwmods = "davinci_mdio";
 871                                 bus_freq = <1000000>;
 872                                 reg = <0x4a101000 0x100>;
 873                                 status = "disabled";
 874                         };
 875
 876                         cpsw_emac0: slave@4a100200 {
 877                                 /* Filled in by U-Boot */
 878                                 mac-address = [ 00 00 00 00 00 00 ];
 879                         };
 880
 881                         cpsw_emac1: slave@4a100300 {
 882                                 /* Filled in by U-Boot */
 883                                 mac-address = [ 00 00 00 00 00 00 ];
 884                         };
 885
 886                         phy_sel: cpsw-phy-sel@44e10650 {
 887                                 compatible = "ti,am3352-cpsw-phy-sel";
 888                                 reg= <0x44e10650 0x4>;
 889                                 reg-names = "gmii-sel";
 890                         };
 891                 };
 892
 893                 ocmcram: ocmcram@40300000 {
 894                         compatible = "mmio-sram";
 895                         reg = <0x40300000 0x10000>; /* 64k */
 896                 };
 897
 898                 elm: elm@48080000 {
 899                         compatible = "ti,am3352-elm";
 900                         reg = <0x48080000 0x2000>;
 901                         interrupts = <4>;
 902                         ti,hwmods = "elm";
 903                         status = "disabled";
 904                 };
 905
 906                 lcdc: lcdc@4830e000 {
 907                         compatible = "ti,am33xx-tilcdc";
 908                         reg = <0x4830e000 0x1000>;
 909                         interrupts = <36>;
 910                         ti,hwmods = "lcdc";
 911                         status = "disabled";
 912                 };
 913
 914                 tscadc: tscadc@44e0d000 {
 915                         compatible = "ti,am3359-tscadc";
 916                         reg = <0x44e0d000 0x1000>;
 917                         interrupts = <16>;
 918                         ti,hwmods = "adc_tsc";
 919                         status = "disabled";
 920                         dmas = <&edma 53 0>, <&edma 57 0>;
 921                         dma-names = "fifo0", "fifo1";
 922
 923                         tsc {
 924                                 compatible = "ti,am3359-tsc";
 925                         };
 926                         am335x_adc: adc {
 927                                 #io-channel-cells = <1>;
 928                                 compatible = "ti,am3359-adc";
 929                         };
 930                 };
 931
 932                 gpmc: gpmc@50000000 {
 933                         compatible = "ti,am3352-gpmc";
 934                         ti,hwmods = "gpmc";
 935                         ti,no-idle-on-init;
 936                         reg = <0x50000000 0x2000>;
 937                         interrupts = <100>;
 938                         dmas = <&edma 52 0>;
 939                         dma-names = "rxtx";
 940                         gpmc,num-cs = <7>;
 941                         gpmc,num-waitpins = <2>;
 942                         #address-cells = <2>;
 943                         #size-cells = <1>;
 944                         interrupt-controller;
 945                         #interrupt-cells = <2>;
 946                         gpio-controller;
 947                         #gpio-cells = <2>;
 948                         status = "disabled";
 949                 };
 950
 951                 sham: sham@53100000 {
 952                         compatible = "ti,omap4-sham";
 953                         ti,hwmods = "sham";
 954                         reg = <0x53100000 0x200>;
 955                         interrupts = <109>;
 956                         dmas = <&edma 36 0>;
 957                         dma-names = "rx";
 958                 };
 959
 960                 aes: aes@53500000 {
 961                         compatible = "ti,omap4-aes";
 962                         ti,hwmods = "aes";
 963                         reg = <0x53500000 0xa0>;
 964                         interrupts = <103>;
 965                         dmas = <&edma 6 0>,
 966                                <&edma 5 0>;
 967                         dma-names = "tx", "rx";
 968                 };
 969
 970                 mcasp0: mcasp@48038000 {
 971                         compatible = "ti,am33xx-mcasp-audio";
 972                         ti,hwmods = "mcasp0";
 973                         reg = <0x48038000 0x2000>,
 974                               <0x46000000 0x400000>;
 975                         reg-names = "mpu", "dat";
 976                         interrupts = <80>, <81>;
 977                         interrupt-names = "tx", "rx";
 978                         status = "disabled";
 979                         dmas = <&edma 8 2>,
 980                                 <&edma 9 2>;
 981                         dma-names = "tx", "rx";
 982                 };
 983
 984                 mcasp1: mcasp@4803C000 {
 985                         compatible = "ti,am33xx-mcasp-audio";
 986                         ti,hwmods = "mcasp1";
 987                         reg = <0x4803C000 0x2000>,
 988                               <0x46400000 0x400000>;
 989                         reg-names = "mpu", "dat";
 990                         interrupts = <82>, <83>;
 991                         interrupt-names = "tx", "rx";
 992                         status = "disabled";
 993                         dmas = <&edma 10 2>,
 994                                 <&edma 11 2>;
 995                         dma-names = "tx", "rx";
 996                 };
 997
 998                 rng: rng@48310000 {
 999                         compatible = "ti,omap4-rng";
1000                         ti,hwmods = "rng";
1001                         reg = <0x48310000 0x2000>;
1002                         interrupts = <111>;
1003                 };
1004         };
1005 };
1006
1007 /include/ "am33xx-clocks.dtsi"