arch/arm/boot/dts/am33xx.dtsi

   1 /*
   2  * Device Tree Source for AM33XX SoC
   3  *
   4  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   5  *
   6  * This file is licensed under the terms of the GNU General Public License
   7  * version 2.  This program is licensed "as is" without any warranty of any
   8  * kind, whether express or implied.
   9  */
  10
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include <dt-bindings/pinctrl/am33xx.h>
  13
  14 / {
  15         compatible = "ti,am33xx";
  16         interrupt-parent = <&intc>;
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19         chosen { };
  20
  21         aliases {
  22                 i2c0 = &i2c0;
  23                 i2c1 = &i2c1;
  24                 i2c2 = &i2c2;
  25                 serial0 = &uart0;
  26                 serial1 = &uart1;
  27                 serial2 = &uart2;
  28                 serial3 = &uart3;
  29                 serial4 = &uart4;
  30                 serial5 = &uart5;
  31                 d_can0 = &dcan0;
  32                 d_can1 = &dcan1;
  33                 usb0 = &usb0;
  34                 usb1 = &usb1;
  35                 phy0 = &usb0_phy;
  36                 phy1 = &usb1_phy;
  37                 ethernet0 = &cpsw_emac0;
  38                 ethernet1 = &cpsw_emac1;
  39                 spi0 = &spi0;
  40                 spi1 = &spi1;
  41         };
  42
  43         cpus {
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46                 cpu@0 {
  47                         compatible = "arm,cortex-a8";
  48                         device_type = "cpu";
  49                         reg = <0>;
  50
  51                         operating-points-v2 = <&cpu0_opp_table>;
  52
  53                         clocks = <&dpll_mpu_ck>;
  54                         clock-names = "cpu";
  55
  56                         clock-latency = <300000>; /* From omap-cpufreq driver */
  57                 };
  58         };
  59
  60         cpu0_opp_table: opp-table {
  61                 compatible = "operating-points-v2-ti-cpu";
  62                 syscon = <&scm_conf>;
  63
  64                 /*
  65                  * The three following nodes are marked with opp-suspend
  66                  * because the can not be enabled simultaneously on a
  67                  * single SoC.
  68                  */
  69                 opp50-300000000 {
  70                         opp-hz = /bits/ 64 <300000000>;
  71                         opp-microvolt = <950000 931000 969000>;
  72                         opp-supported-hw = <0x06 0x0010>;
  73                         opp-suspend;
  74                 };
  75
  76                 opp100-275000000 {
  77                         opp-hz = /bits/ 64 <275000000>;
  78                         opp-microvolt = <1100000 1078000 1122000>;
  79                         opp-supported-hw = <0x01 0x00FF>;
  80                         opp-suspend;
  81                 };
  82
  83                 opp100-300000000 {
  84                         opp-hz = /bits/ 64 <300000000>;
  85                         opp-microvolt = <1100000 1078000 1122000>;
  86                         opp-supported-hw = <0x06 0x0020>;
  87                         opp-suspend;
  88                 };
  89
  90                 opp100-500000000 {
  91                         opp-hz = /bits/ 64 <500000000>;
  92                         opp-microvolt = <1100000 1078000 1122000>;
  93                         opp-supported-hw = <0x01 0xFFFF>;
  94                 };
  95
  96                 opp100-600000000 {
  97                         opp-hz = /bits/ 64 <600000000>;
  98                         opp-microvolt = <1100000 1078000 1122000>;
  99                         opp-supported-hw = <0x06 0x0040>;
 100                 };
 101
 102                 opp120-600000000 {
 103                         opp-hz = /bits/ 64 <600000000>;
 104                         opp-microvolt = <1200000 1176000 1224000>;
 105                         opp-supported-hw = <0x01 0xFFFF>;
 106                 };
 107
 108                 opp120-720000000 {
 109                         opp-hz = /bits/ 64 <720000000>;
 110                         opp-microvolt = <1200000 1176000 1224000>;
 111                         opp-supported-hw = <0x06 0x0080>;
 112                 };
 113
 114                 oppturbo-720000000 {
 115                         opp-hz = /bits/ 64 <720000000>;
 116                         opp-microvolt = <1260000 1234800 1285200>;
 117                         opp-supported-hw = <0x01 0xFFFF>;
 118                 };
 119
 120                 oppturbo-800000000 {
 121                         opp-hz = /bits/ 64 <800000000>;
 122                         opp-microvolt = <1260000 1234800 1285200>;
 123                         opp-supported-hw = <0x06 0x0100>;
 124                 };
 125
 126                 oppnitro-1000000000 {
 127                         opp-hz = /bits/ 64 <1000000000>;
 128                         opp-microvolt = <1325000 1298500 1351500>;
 129                         opp-supported-hw = <0x04 0x0200>;
 130                 };
 131         };
 132
 133         pmu@4b000000 {
 134                 compatible = "arm,cortex-a8-pmu";
 135                 interrupts = <3>;
 136                 reg = <0x4b000000 0x1000000>;
 137                 ti,hwmods = "debugss";
 138         };
 139
 140         /*
 141          * The soc node represents the soc top level view. It is used for IPs
 142          * that are not memory mapped in the MPU view or for the MPU itself.
 143          */
 144         soc {
 145                 compatible = "ti,omap-infra";
 146                 mpu {
 147                         compatible = "ti,omap3-mpu";
 148                         ti,hwmods = "mpu";
 149                 };
 150         };
 151
 152         /*
 153          * XXX: Use a flat representation of the AM33XX interconnect.
 154          * The real AM33XX interconnect network is quite complex. Since
 155          * it will not bring real advantage to represent that in DT
 156          * for the moment, just use a fake OCP bus entry to represent
 157          * the whole bus hierarchy.
 158          */
 159         ocp {
 160                 compatible = "simple-bus";
 161                 #address-cells = <1>;
 162                 #size-cells = <1>;
 163                 ranges;
 164                 ti,hwmods = "l3_main";
 165
 166                 l4_wkup: l4_wkup@44c00000 {
 167                         compatible = "ti,am3-l4-wkup", "simple-bus";
 168                         #address-cells = <1>;
 169                         #size-cells = <1>;
 170                         ranges = <0 0x44c00000 0x280000>;
 171
 172                         wkup_m3: wkup_m3@100000 {
 173                                 compatible = "ti,am3352-wkup-m3";
 174                                 reg = <0x100000 0x4000>,
 175                                       <0x180000 0x2000>;
 176                                 reg-names = "umem", "dmem";
 177                                 ti,hwmods = "wkup_m3";
 178                                 ti,pm-firmware = "am335x-pm-firmware.elf";
 179                         };
 180
 181                         prcm: prcm@200000 {
 182                                 compatible = "ti,am3-prcm";
 183                                 reg = <0x200000 0x4000>;
 184
 185                                 prcm_clocks: clocks {
 186                                         #address-cells = <1>;
 187                                         #size-cells = <0>;
 188                                 };
 189
 190                                 prcm_clockdomains: clockdomains {
 191                                 };
 192                         };
 193
 194                         scm: scm@210000 {
 195                                 compatible = "ti,am3-scm", "simple-bus";
 196                                 reg = <0x210000 0x2000>;
 197                                 #address-cells = <1>;
 198                                 #size-cells = <1>;
 199                                 #pinctrl-cells = <1>;
 200                                 ranges = <0 0x210000 0x2000>;
 201
 202                                 am33xx_pinmux: pinmux@800 {
 203                                         compatible = "pinctrl-single";
 204                                         reg = <0x800 0x238>;
 205                                         #address-cells = <1>;
 206                                         #size-cells = <0>;
 207                                         #pinctrl-cells = <1>;
 208                                         pinctrl-single,register-width = <32>;
 209                                         pinctrl-single,function-mask = <0x7f>;
 210                                 };
 211
 212                                 scm_conf: scm_conf@0 {
 213                                         compatible = "syscon", "simple-bus";
 214                                         reg = <0x0 0x800>;
 215                                         #address-cells = <1>;
 216                                         #size-cells = <1>;
 217                                         ranges = <0 0 0x800>;
 218
 219                                         scm_clocks: clocks {
 220                                                 #address-cells = <1>;
 221                                                 #size-cells = <0>;
 222                                         };
 223                                 };
 224
 225                                 wkup_m3_ipc: wkup_m3_ipc@1324 {
 226                                         compatible = "ti,am3352-wkup-m3-ipc";
 227                                         reg = <0x1324 0x24>;
 228                                         interrupts = <78>;
 229                                         ti,rproc = <&wkup_m3>;
 230                                         mboxes = <&mailbox &mbox_wkupm3>;
 231                                 };
 232
 233                                 edma_xbar: dma-router@f90 {
 234                                         compatible = "ti,am335x-edma-crossbar";
 235                                         reg = <0xf90 0x40>;
 236                                         #dma-cells = <3>;
 237                                         dma-requests = <32>;
 238                                         dma-masters = <&edma>;
 239                                 };
 240
 241                                 scm_clockdomains: clockdomains {
 242                                 };
 243                         };
 244                 };
 245
 246                 intc: interrupt-controller@48200000 {
 247                         compatible = "ti,am33xx-intc";
 248                         interrupt-controller;
 249                         #interrupt-cells = <1>;
 250                         reg = <0x48200000 0x1000>;
 251                 };
 252
 253                 edma: edma@49000000 {
 254                         compatible = "ti,edma3-tpcc";
 255                         ti,hwmods = "tpcc";
 256                         reg =   <0x49000000 0x10000>;
 257                         reg-names = "edma3_cc";
 258                         interrupts = <12 13 14>;
 259                         interrupt-names = "edma3_ccint", "edma3_mperr",
 260                                           "edma3_ccerrint";
 261                         dma-requests = <64>;
 262                         #dma-cells = <2>;
 263
 264                         ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
 265                                    <&edma_tptc2 0>;
 266
 267                         ti,edma-memcpy-channels = <20 21>;
 268                 };
 269
 270                 edma_tptc0: tptc@49800000 {
 271                         compatible = "ti,edma3-tptc";
 272                         ti,hwmods = "tptc0";
 273                         reg =   <0x49800000 0x100000>;
 274                         interrupts = <112>;
 275                         interrupt-names = "edma3_tcerrint";
 276                 };
 277
 278                 edma_tptc1: tptc@49900000 {
 279                         compatible = "ti,edma3-tptc";
 280                         ti,hwmods = "tptc1";
 281                         reg =   <0x49900000 0x100000>;
 282                         interrupts = <113>;
 283                         interrupt-names = "edma3_tcerrint";
 284                 };
 285
 286                 edma_tptc2: tptc@49a00000 {
 287                         compatible = "ti,edma3-tptc";
 288                         ti,hwmods = "tptc2";
 289                         reg =   <0x49a00000 0x100000>;
 290                         interrupts = <114>;
 291                         interrupt-names = "edma3_tcerrint";
 292                 };
 293
 294                 gpio0: gpio@44e07000 {
 295                         compatible = "ti,omap4-gpio";
 296                         ti,hwmods = "gpio1";
 297                         gpio-controller;
 298                         #gpio-cells = <2>;
 299                         interrupt-controller;
 300                         #interrupt-cells = <2>;
 301                         reg = <0x44e07000 0x1000>;
 302                         interrupts = <96>;
 303                 };
 304
 305                 gpio1: gpio@4804c000 {
 306                         compatible = "ti,omap4-gpio";
 307                         ti,hwmods = "gpio2";
 308                         gpio-controller;
 309                         #gpio-cells = <2>;
 310                         interrupt-controller;
 311                         #interrupt-cells = <2>;
 312                         reg = <0x4804c000 0x1000>;
 313                         interrupts = <98>;
 314                 };
 315
 316                 gpio2: gpio@481ac000 {
 317                         compatible = "ti,omap4-gpio";
 318                         ti,hwmods = "gpio3";
 319                         gpio-controller;
 320                         #gpio-cells = <2>;
 321                         interrupt-controller;
 322                         #interrupt-cells = <2>;
 323                         reg = <0x481ac000 0x1000>;
 324                         interrupts = <32>;
 325                 };
 326
 327                 gpio3: gpio@481ae000 {
 328                         compatible = "ti,omap4-gpio";
 329                         ti,hwmods = "gpio4";
 330                         gpio-controller;
 331                         #gpio-cells = <2>;
 332                         interrupt-controller;
 333                         #interrupt-cells = <2>;
 334                         reg = <0x481ae000 0x1000>;
 335                         interrupts = <62>;
 336                 };
 337
 338                 uart0: serial@44e09000 {
 339                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 340                         ti,hwmods = "uart1";
 341                         clock-frequency = <48000000>;
 342                         reg = <0x44e09000 0x2000>;
 343                         interrupts = <72>;
 344                         status = "disabled";
 345                         dmas = <&edma 26 0>, <&edma 27 0>;
 346                         dma-names = "tx", "rx";
 347                 };
 348
 349                 uart1: serial@48022000 {
 350                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 351                         ti,hwmods = "uart2";
 352                         clock-frequency = <48000000>;
 353                         reg = <0x48022000 0x2000>;
 354                         interrupts = <73>;
 355                         status = "disabled";
 356                         dmas = <&edma 28 0>, <&edma 29 0>;
 357                         dma-names = "tx", "rx";
 358                 };
 359
 360                 uart2: serial@48024000 {
 361                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 362                         ti,hwmods = "uart3";
 363                         clock-frequency = <48000000>;
 364                         reg = <0x48024000 0x2000>;
 365                         interrupts = <74>;
 366                         status = "disabled";
 367                         dmas = <&edma 30 0>, <&edma 31 0>;
 368                         dma-names = "tx", "rx";
 369                 };
 370
 371                 uart3: serial@481a6000 {
 372                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 373                         ti,hwmods = "uart4";
 374                         clock-frequency = <48000000>;
 375                         reg = <0x481a6000 0x2000>;
 376                         interrupts = <44>;
 377                         status = "disabled";
 378                 };
 379
 380                 uart4: serial@481a8000 {
 381                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 382                         ti,hwmods = "uart5";
 383                         clock-frequency = <48000000>;
 384                         reg = <0x481a8000 0x2000>;
 385                         interrupts = <45>;
 386                         status = "disabled";
 387                 };
 388
 389                 uart5: serial@481aa000 {
 390                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 391                         ti,hwmods = "uart6";
 392                         clock-frequency = <48000000>;
 393                         reg = <0x481aa000 0x2000>;
 394                         interrupts = <46>;
 395                         status = "disabled";
 396                 };
 397
 398                 i2c0: i2c@44e0b000 {
 399                         compatible = "ti,omap4-i2c";
 400                         #address-cells = <1>;
 401                         #size-cells = <0>;
 402                         ti,hwmods = "i2c1";
 403                         reg = <0x44e0b000 0x1000>;
 404                         interrupts = <70>;
 405                         status = "disabled";
 406                 };
 407
 408                 i2c1: i2c@4802a000 {
 409                         compatible = "ti,omap4-i2c";
 410                         #address-cells = <1>;
 411                         #size-cells = <0>;
 412                         ti,hwmods = "i2c2";
 413                         reg = <0x4802a000 0x1000>;
 414                         interrupts = <71>;
 415                         status = "disabled";
 416                 };
 417
 418                 i2c2: i2c@4819c000 {
 419                         compatible = "ti,omap4-i2c";
 420                         #address-cells = <1>;
 421                         #size-cells = <0>;
 422                         ti,hwmods = "i2c3";
 423                         reg = <0x4819c000 0x1000>;
 424                         interrupts = <30>;
 425                         status = "disabled";
 426                 };
 427
 428                 mmc1: mmc@48060000 {
 429                         compatible = "ti,omap4-hsmmc";
 430                         ti,hwmods = "mmc1";
 431                         ti,dual-volt;
 432                         ti,needs-special-reset;
 433                         ti,needs-special-hs-handling;
 434                         dmas = <&edma_xbar 24 0 0
 435                                 &edma_xbar 25 0 0>;
 436                         dma-names = "tx", "rx";
 437                         interrupts = <64>;
 438                         reg = <0x48060000 0x1000>;
 439                         status = "disabled";
 440                 };
 441
 442                 mmc2: mmc@481d8000 {
 443                         compatible = "ti,omap4-hsmmc";
 444                         ti,hwmods = "mmc2";
 445                         ti,needs-special-reset;
 446                         dmas = <&edma 2 0
 447                                 &edma 3 0>;
 448                         dma-names = "tx", "rx";
 449                         interrupts = <28>;
 450                         reg = <0x481d8000 0x1000>;
 451                         status = "disabled";
 452                 };
 453
 454                 mmc3: mmc@47810000 {
 455                         compatible = "ti,omap4-hsmmc";
 456                         ti,hwmods = "mmc3";
 457                         ti,needs-special-reset;
 458                         interrupts = <29>;
 459                         reg = <0x47810000 0x1000>;
 460                         status = "disabled";
 461                 };
 462
 463                 hwspinlock: spinlock@480ca000 {
 464                         compatible = "ti,omap4-hwspinlock";
 465                         reg = <0x480ca000 0x1000>;
 466                         ti,hwmods = "spinlock";
 467                         #hwlock-cells = <1>;
 468                 };
 469
 470                 wdt2: wdt@44e35000 {
 471                         compatible = "ti,omap3-wdt";
 472                         ti,hwmods = "wd_timer2";
 473                         reg = <0x44e35000 0x1000>;
 474                         interrupts = <91>;
 475                 };
 476
 477                 dcan0: can@481cc000 {
 478                         compatible = "ti,am3352-d_can";
 479                         ti,hwmods = "d_can0";
 480                         reg = <0x481cc000 0x2000>;
 481                         clocks = <&dcan0_fck>;
 482                         clock-names = "fck";
 483                         syscon-raminit = <&scm_conf 0x644 0>;
 484                         interrupts = <52>;
 485                         status = "disabled";
 486                 };
 487
 488                 dcan1: can@481d0000 {
 489                         compatible = "ti,am3352-d_can";
 490                         ti,hwmods = "d_can1";
 491                         reg = <0x481d0000 0x2000>;
 492                         clocks = <&dcan1_fck>;
 493                         clock-names = "fck";
 494                         syscon-raminit = <&scm_conf 0x644 1>;
 495                         interrupts = <55>;
 496                         status = "disabled";
 497                 };
 498
 499                 mailbox: mailbox@480C8000 {
 500                         compatible = "ti,omap4-mailbox";
 501                         reg = <0x480C8000 0x200>;
 502                         interrupts = <77>;
 503                         ti,hwmods = "mailbox";
 504                         #mbox-cells = <1>;
 505                         ti,mbox-num-users = <4>;
 506                         ti,mbox-num-fifos = <8>;
 507                         mbox_wkupm3: wkup_m3 {
 508                                 ti,mbox-send-noirq;
 509                                 ti,mbox-tx = <0 0 0>;
 510                                 ti,mbox-rx = <0 0 3>;
 511                         };
 512                 };
 513
 514                 timer1: timer@44e31000 {
 515                         compatible = "ti,am335x-timer-1ms";
 516                         reg = <0x44e31000 0x400>;
 517                         interrupts = <67>;
 518                         ti,hwmods = "timer1";
 519                         ti,timer-alwon;
 520                 };
 521
 522                 timer2: timer@48040000 {
 523                         compatible = "ti,am335x-timer";
 524                         reg = <0x48040000 0x400>;
 525                         interrupts = <68>;
 526                         ti,hwmods = "timer2";
 527                 };
 528
 529                 timer3: timer@48042000 {
 530                         compatible = "ti,am335x-timer";
 531                         reg = <0x48042000 0x400>;
 532                         interrupts = <69>;
 533                         ti,hwmods = "timer3";
 534                 };
 535
 536                 timer4: timer@48044000 {
 537                         compatible = "ti,am335x-timer";
 538                         reg = <0x48044000 0x400>;
 539                         interrupts = <92>;
 540                         ti,hwmods = "timer4";
 541                         ti,timer-pwm;
 542                 };
 543
 544                 timer5: timer@48046000 {
 545                         compatible = "ti,am335x-timer";
 546                         reg = <0x48046000 0x400>;
 547                         interrupts = <93>;
 548                         ti,hwmods = "timer5";
 549                         ti,timer-pwm;
 550                 };
 551
 552                 timer6: timer@48048000 {
 553                         compatible = "ti,am335x-timer";
 554                         reg = <0x48048000 0x400>;
 555                         interrupts = <94>;
 556                         ti,hwmods = "timer6";
 557                         ti,timer-pwm;
 558                 };
 559
 560                 timer7: timer@4804a000 {
 561                         compatible = "ti,am335x-timer";
 562                         reg = <0x4804a000 0x400>;
 563                         interrupts = <95>;
 564                         ti,hwmods = "timer7";
 565                         ti,timer-pwm;
 566                 };
 567
 568                 rtc: rtc@44e3e000 {
 569                         compatible = "ti,am3352-rtc", "ti,da830-rtc";
 570                         reg = <0x44e3e000 0x1000>;
 571                         interrupts = <75
 572                                       76>;
 573                         ti,hwmods = "rtc";
 574                         clocks = <&clkdiv32k_ick>;
 575                         clock-names = "int-clk";
 576                 };
 577
 578                 spi0: spi@48030000 {
 579                         compatible = "ti,omap4-mcspi";
 580                         #address-cells = <1>;
 581                         #size-cells = <0>;
 582                         reg = <0x48030000 0x400>;
 583                         interrupts = <65>;
 584                         ti,spi-num-cs = <2>;
 585                         ti,hwmods = "spi0";
 586                         dmas = <&edma 16 0
 587                                 &edma 17 0
 588                                 &edma 18 0
 589                                 &edma 19 0>;
 590                         dma-names = "tx0", "rx0", "tx1", "rx1";
 591                         status = "disabled";
 592                 };
 593
 594                 spi1: spi@481a0000 {
 595                         compatible = "ti,omap4-mcspi";
 596                         #address-cells = <1>;
 597                         #size-cells = <0>;
 598                         reg = <0x481a0000 0x400>;
 599                         interrupts = <125>;
 600                         ti,spi-num-cs = <2>;
 601                         ti,hwmods = "spi1";
 602                         dmas = <&edma 42 0
 603                                 &edma 43 0
 604                                 &edma 44 0
 605                                 &edma 45 0>;
 606                         dma-names = "tx0", "rx0", "tx1", "rx1";
 607                         status = "disabled";
 608                 };
 609
 610                 usb: usb@47400000 {
 611                         compatible = "ti,am33xx-usb";
 612                         reg = <0x47400000 0x1000>;
 613                         ranges;
 614                         #address-cells = <1>;
 615                         #size-cells = <1>;
 616                         ti,hwmods = "usb_otg_hs";
 617                         status = "disabled";
 618
 619                         usb_ctrl_mod: control@44e10620 {
 620                                 compatible = "ti,am335x-usb-ctrl-module";
 621                                 reg = <0x44e10620 0x10
 622                                         0x44e10648 0x4>;
 623                                 reg-names = "phy_ctrl", "wakeup";
 624                                 status = "disabled";
 625                         };
 626
 627                         usb0_phy: usb-phy@47401300 {
 628                                 compatible = "ti,am335x-usb-phy";
 629                                 reg = <0x47401300 0x100>;
 630                                 reg-names = "phy";
 631                                 status = "disabled";
 632                                 ti,ctrl_mod = <&usb_ctrl_mod>;
 633                                 #phy-cells = <0>;
 634                         };
 635
 636                         usb0: usb@47401000 {
 637                                 compatible = "ti,musb-am33xx";
 638                                 status = "disabled";
 639                                 reg = <0x47401400 0x400
 640                                         0x47401000 0x200>;
 641                                 reg-names = "mc", "control";
 642
 643                                 interrupts = <18>;
 644                                 interrupt-names = "mc";
 645                                 dr_mode = "otg";
 646                                 mentor,multipoint = <1>;
 647                                 mentor,num-eps = <16>;
 648                                 mentor,ram-bits = <12>;
 649                                 mentor,power = <500>;
 650                                 phys = <&usb0_phy>;
 651
 652                                 dmas = <&cppi41dma  0 0 &cppi41dma  1 0
 653                                         &cppi41dma  2 0 &cppi41dma  3 0
 654                                         &cppi41dma  4 0 &cppi41dma  5 0
 655                                         &cppi41dma  6 0 &cppi41dma  7 0
 656                                         &cppi41dma  8 0 &cppi41dma  9 0
 657                                         &cppi41dma 10 0 &cppi41dma 11 0
 658                                         &cppi41dma 12 0 &cppi41dma 13 0
 659                                         &cppi41dma 14 0 &cppi41dma  0 1
 660                                         &cppi41dma  1 1 &cppi41dma  2 1
 661                                         &cppi41dma  3 1 &cppi41dma  4 1
 662                                         &cppi41dma  5 1 &cppi41dma  6 1
 663                                         &cppi41dma  7 1 &cppi41dma  8 1
 664                                         &cppi41dma  9 1 &cppi41dma 10 1
 665                                         &cppi41dma 11 1 &cppi41dma 12 1
 666                                         &cppi41dma 13 1 &cppi41dma 14 1>;
 667                                 dma-names =
 668                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 669                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 670                                         "rx14", "rx15",
 671                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 672                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 673                                         "tx14", "tx15";
 674                         };
 675
 676                         usb1_phy: usb-phy@47401b00 {
 677                                 compatible = "ti,am335x-usb-phy";
 678                                 reg = <0x47401b00 0x100>;
 679                                 reg-names = "phy";
 680                                 status = "disabled";
 681                                 ti,ctrl_mod = <&usb_ctrl_mod>;
 682                                 #phy-cells = <0>;
 683                         };
 684
 685                         usb1: usb@47401800 {
 686                                 compatible = "ti,musb-am33xx";
 687                                 status = "disabled";
 688                                 reg = <0x47401c00 0x400
 689                                         0x47401800 0x200>;
 690                                 reg-names = "mc", "control";
 691                                 interrupts = <19>;
 692                                 interrupt-names = "mc";
 693                                 dr_mode = "otg";
 694                                 mentor,multipoint = <1>;
 695                                 mentor,num-eps = <16>;
 696                                 mentor,ram-bits = <12>;
 697                                 mentor,power = <500>;
 698                                 phys = <&usb1_phy>;
 699
 700                                 dmas = <&cppi41dma 15 0 &cppi41dma 16 0
 701                                         &cppi41dma 17 0 &cppi41dma 18 0
 702                                         &cppi41dma 19 0 &cppi41dma 20 0
 703                                         &cppi41dma 21 0 &cppi41dma 22 0
 704                                         &cppi41dma 23 0 &cppi41dma 24 0
 705                                         &cppi41dma 25 0 &cppi41dma 26 0
 706                                         &cppi41dma 27 0 &cppi41dma 28 0
 707                                         &cppi41dma 29 0 &cppi41dma 15 1
 708                                         &cppi41dma 16 1 &cppi41dma 17 1
 709                                         &cppi41dma 18 1 &cppi41dma 19 1
 710                                         &cppi41dma 20 1 &cppi41dma 21 1
 711                                         &cppi41dma 22 1 &cppi41dma 23 1
 712                                         &cppi41dma 24 1 &cppi41dma 25 1
 713                                         &cppi41dma 26 1 &cppi41dma 27 1
 714                                         &cppi41dma 28 1 &cppi41dma 29 1>;
 715                                 dma-names =
 716                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 717                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 718                                         "rx14", "rx15",
 719                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 720                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 721                                         "tx14", "tx15";
 722                         };
 723
 724                         cppi41dma: dma-controller@47402000 {
 725                                 compatible = "ti,am3359-cppi41";
 726                                 reg =  <0x47400000 0x1000
 727                                         0x47402000 0x1000
 728                                         0x47403000 0x1000
 729                                         0x47404000 0x4000>;
 730                                 reg-names = "glue", "controller", "scheduler", "queuemgr";
 731                                 interrupts = <17>;
 732                                 interrupt-names = "glue";
 733                                 #dma-cells = <2>;
 734                                 #dma-channels = <30>;
 735                                 #dma-requests = <256>;
 736                                 status = "disabled";
 737                         };
 738                 };
 739
 740                 epwmss0: epwmss@48300000 {
 741                         compatible = "ti,am33xx-pwmss";
 742                         reg = <0x48300000 0x10>;
 743                         ti,hwmods = "epwmss0";
 744                         #address-cells = <1>;
 745                         #size-cells = <1>;
 746                         status = "disabled";
 747                         ranges = <0x48300100 0x48300100 0x80   /* ECAP */
 748                                   0x48300180 0x48300180 0x80   /* EQEP */
 749                                   0x48300200 0x48300200 0x80>; /* EHRPWM */
 750
 751                         ecap0: ecap@48300100 {
 752                                 compatible = "ti,am3352-ecap",
 753                                              "ti,am33xx-ecap";
 754                                 #pwm-cells = <3>;
 755                                 reg = <0x48300100 0x80>;
 756                                 clocks = <&l4ls_gclk>;
 757                                 clock-names = "fck";
 758                                 interrupts = <31>;
 759                                 interrupt-names = "ecap0";
 760                                 status = "disabled";
 761                         };
 762
 763                         ehrpwm0: pwm@48300200 {
 764                                 compatible = "ti,am3352-ehrpwm",
 765                                              "ti,am33xx-ehrpwm";
 766                                 #pwm-cells = <3>;
 767                                 reg = <0x48300200 0x80>;
 768                                 clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
 769                                 clock-names = "tbclk", "fck";
 770                                 status = "disabled";
 771                         };
 772                 };
 773
 774                 epwmss1: epwmss@48302000 {
 775                         compatible = "ti,am33xx-pwmss";
 776                         reg = <0x48302000 0x10>;
 777                         ti,hwmods = "epwmss1";
 778                         #address-cells = <1>;
 779                         #size-cells = <1>;
 780                         status = "disabled";
 781                         ranges = <0x48302100 0x48302100 0x80   /* ECAP */
 782                                   0x48302180 0x48302180 0x80   /* EQEP */
 783                                   0x48302200 0x48302200 0x80>; /* EHRPWM */
 784
 785                         ecap1: ecap@48302100 {
 786                                 compatible = "ti,am3352-ecap",
 787                                              "ti,am33xx-ecap";
 788                                 #pwm-cells = <3>;
 789                                 reg = <0x48302100 0x80>;
 790                                 clocks = <&l4ls_gclk>;
 791                                 clock-names = "fck";
 792                                 interrupts = <47>;
 793                                 interrupt-names = "ecap1";
 794                                 status = "disabled";
 795                         };
 796
 797                         ehrpwm1: pwm@48302200 {
 798                                 compatible = "ti,am3352-ehrpwm",
 799                                              "ti,am33xx-ehrpwm";
 800                                 #pwm-cells = <3>;
 801                                 reg = <0x48302200 0x80>;
 802                                 clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
 803                                 clock-names = "tbclk", "fck";
 804                                 status = "disabled";
 805                         };
 806                 };
 807
 808                 epwmss2: epwmss@48304000 {
 809                         compatible = "ti,am33xx-pwmss";
 810                         reg = <0x48304000 0x10>;
 811                         ti,hwmods = "epwmss2";
 812                         #address-cells = <1>;
 813                         #size-cells = <1>;
 814                         status = "disabled";
 815                         ranges = <0x48304100 0x48304100 0x80   /* ECAP */
 816                                   0x48304180 0x48304180 0x80   /* EQEP */
 817                                   0x48304200 0x48304200 0x80>; /* EHRPWM */
 818
 819                         ecap2: ecap@48304100 {
 820                                 compatible = "ti,am3352-ecap",
 821                                              "ti,am33xx-ecap";
 822                                 #pwm-cells = <3>;
 823                                 reg = <0x48304100 0x80>;
 824                                 clocks = <&l4ls_gclk>;
 825                                 clock-names = "fck";
 826                                 interrupts = <61>;
 827                                 interrupt-names = "ecap2";
 828                                 status = "disabled";
 829                         };
 830
 831                         ehrpwm2: pwm@48304200 {
 832                                 compatible = "ti,am3352-ehrpwm",
 833                                              "ti,am33xx-ehrpwm";
 834                                 #pwm-cells = <3>;
 835                                 reg = <0x48304200 0x80>;
 836                                 clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
 837                                 clock-names = "tbclk", "fck";
 838                                 status = "disabled";
 839                         };
 840                 };
 841
 842                 mac: ethernet@4a100000 {
 843                         compatible = "ti,am335x-cpsw","ti,cpsw";
 844                         ti,hwmods = "cpgmac0";
 845                         clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
 846                         clock-names = "fck", "cpts";
 847                         cpdma_channels = <8>;
 848                         ale_entries = <1024>;
 849                         bd_ram_size = <0x2000>;
 850                         mac_control = <0x20>;
 851                         slaves = <2>;
 852                         active_slave = <0>;
 853                         cpts_clock_mult = <0x80000000>;
 854                         cpts_clock_shift = <29>;
 855                         reg = <0x4a100000 0x800
 856                                0x4a101200 0x100>;
 857                         #address-cells = <1>;
 858                         #size-cells = <1>;
 859                         /*
 860                          * c0_rx_thresh_pend
 861                          * c0_rx_pend
 862                          * c0_tx_pend
 863                          * c0_misc_pend
 864                          */
 865                         interrupts = <40 41 42 43>;
 866                         ranges;
 867                         syscon = <&scm_conf>;
 868                         status = "disabled";
 869
 870                         davinci_mdio: mdio@4a101000 {
 871                                 compatible = "ti,cpsw-mdio","ti,davinci_mdio";
 872                                 #address-cells = <1>;
 873                                 #size-cells = <0>;
 874                                 ti,hwmods = "davinci_mdio";
 875                                 bus_freq = <1000000>;
 876                                 reg = <0x4a101000 0x100>;
 877                                 status = "disabled";
 878                         };
 879
 880                         cpsw_emac0: slave@4a100200 {
 881                                 /* Filled in by U-Boot */
 882                                 mac-address = [ 00 00 00 00 00 00 ];
 883                         };
 884
 885                         cpsw_emac1: slave@4a100300 {
 886                                 /* Filled in by U-Boot */
 887                                 mac-address = [ 00 00 00 00 00 00 ];
 888                         };
 889
 890                         phy_sel: cpsw-phy-sel@44e10650 {
 891                                 compatible = "ti,am3352-cpsw-phy-sel";
 892                                 reg= <0x44e10650 0x4>;
 893                                 reg-names = "gmii-sel";
 894                         };
 895                 };
 896
 897                 ocmcram: ocmcram@40300000 {
 898                         compatible = "mmio-sram";
 899                         reg = <0x40300000 0x10000>; /* 64k */
 900                 };
 901
 902                 elm: elm@48080000 {
 903                         compatible = "ti,am3352-elm";
 904                         reg = <0x48080000 0x2000>;
 905                         interrupts = <4>;
 906                         ti,hwmods = "elm";
 907                         status = "disabled";
 908                 };
 909
 910                 lcdc: lcdc@4830e000 {
 911                         compatible = "ti,am33xx-tilcdc";
 912                         reg = <0x4830e000 0x1000>;
 913                         interrupts = <36>;
 914                         ti,hwmods = "lcdc";
 915                         status = "disabled";
 916                 };
 917
 918                 tscadc: tscadc@44e0d000 {
 919                         compatible = "ti,am3359-tscadc";
 920                         reg = <0x44e0d000 0x1000>;
 921                         interrupts = <16>;
 922                         ti,hwmods = "adc_tsc";
 923                         status = "disabled";
 924                         dmas = <&edma 53 0>, <&edma 57 0>;
 925                         dma-names = "fifo0", "fifo1";
 926
 927                         tsc {
 928                                 compatible = "ti,am3359-tsc";
 929                         };
 930                         am335x_adc: adc {
 931                                 #io-channel-cells = <1>;
 932                                 compatible = "ti,am3359-adc";
 933                         };
 934                 };
 935
 936                 emif: emif@4c000000 {
 937                         compatible = "ti,emif-am3352";
 938                         reg = <0x4c000000 0x1000000>;
 939                         ti,hwmods = "emif";
 940                 };
 941
 942                 gpmc: gpmc@50000000 {
 943                         compatible = "ti,am3352-gpmc";
 944                         ti,hwmods = "gpmc";
 945                         ti,no-idle-on-init;
 946                         reg = <0x50000000 0x2000>;
 947                         interrupts = <100>;
 948                         dmas = <&edma 52 0>;
 949                         dma-names = "rxtx";
 950                         gpmc,num-cs = <7>;
 951                         gpmc,num-waitpins = <2>;
 952                         #address-cells = <2>;
 953                         #size-cells = <1>;
 954                         interrupt-controller;
 955                         #interrupt-cells = <2>;
 956                         gpio-controller;
 957                         #gpio-cells = <2>;
 958                         status = "disabled";
 959                 };
 960
 961                 sham: sham@53100000 {
 962                         compatible = "ti,omap4-sham";
 963                         ti,hwmods = "sham";
 964                         reg = <0x53100000 0x200>;
 965                         interrupts = <109>;
 966                         dmas = <&edma 36 0>;
 967                         dma-names = "rx";
 968                 };
 969
 970                 aes: aes@53500000 {
 971                         compatible = "ti,omap4-aes";
 972                         ti,hwmods = "aes";
 973                         reg = <0x53500000 0xa0>;
 974                         interrupts = <103>;
 975                         dmas = <&edma 6 0>,
 976                                <&edma 5 0>;
 977                         dma-names = "tx", "rx";
 978                 };
 979
 980                 mcasp0: mcasp@48038000 {
 981                         compatible = "ti,am33xx-mcasp-audio";
 982                         ti,hwmods = "mcasp0";
 983                         reg = <0x48038000 0x2000>,
 984                               <0x46000000 0x400000>;
 985                         reg-names = "mpu", "dat";
 986                         interrupts = <80>, <81>;
 987                         interrupt-names = "tx", "rx";
 988                         status = "disabled";
 989                         dmas = <&edma 8 2>,
 990                                 <&edma 9 2>;
 991                         dma-names = "tx", "rx";
 992                 };
 993
 994                 mcasp1: mcasp@4803C000 {
 995                         compatible = "ti,am33xx-mcasp-audio";
 996                         ti,hwmods = "mcasp1";
 997                         reg = <0x4803C000 0x2000>,
 998                               <0x46400000 0x400000>;
 999                         reg-names = "mpu", "dat";
1000                         interrupts = <82>, <83>;
1001                         interrupt-names = "tx", "rx";
1002                         status = "disabled";
1003                         dmas = <&edma 10 2>,
1004                                 <&edma 11 2>;
1005                         dma-names = "tx", "rx";
1006                 };
1007
1008                 rng: rng@48310000 {
1009                         compatible = "ti,omap4-rng";
1010                         ti,hwmods = "rng";
1011                         reg = <0x48310000 0x2000>;
1012                         interrupts = <111>;
1013                 };
1014         };
1015 };
1016
1017 /include/ "am33xx-clocks.dtsi"