arch/arm/boot/dts/am33xx.dtsi

   1 /*
   2  * Device Tree Source for AM33XX SoC
   3  *
   4  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   5  *
   6  * This file is licensed under the terms of the GNU General Public License
   7  * version 2.  This program is licensed "as is" without any warranty of any
   8  * kind, whether express or implied.
   9  */
  10
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include <dt-bindings/pinctrl/am33xx.h>
  13
  14 / {
  15         compatible = "ti,am33xx";
  16         interrupt-parent = <&intc>;
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19         chosen { };
  20
  21         aliases {
  22                 i2c0 = &i2c0;
  23                 i2c1 = &i2c1;
  24                 i2c2 = &i2c2;
  25                 serial0 = &uart0;
  26                 serial1 = &uart1;
  27                 serial2 = &uart2;
  28                 serial3 = &uart3;
  29                 serial4 = &uart4;
  30                 serial5 = &uart5;
  31                 d_can0 = &dcan0;
  32                 d_can1 = &dcan1;
  33                 usb0 = &usb0;
  34                 usb1 = &usb1;
  35                 phy0 = &usb0_phy;
  36                 phy1 = &usb1_phy;
  37                 ethernet0 = &cpsw_emac0;
  38                 ethernet1 = &cpsw_emac1;
  39         };
  40
  41         cpus {
  42                 #address-cells = <1>;
  43                 #size-cells = <0>;
  44                 cpu@0 {
  45                         compatible = "arm,cortex-a8";
  46                         device_type = "cpu";
  47                         reg = <0>;
  48
  49                         operating-points-v2 = <&cpu0_opp_table>;
  50
  51                         clocks = <&dpll_mpu_ck>;
  52                         clock-names = "cpu";
  53
  54                         clock-latency = <300000>; /* From omap-cpufreq driver */
  55                 };
  56         };
  57
  58         cpu0_opp_table: opp-table {
  59                 compatible = "operating-points-v2-ti-cpu";
  60                 syscon = <&scm_conf>;
  61
  62                 /*
  63                  * The three following nodes are marked with opp-suspend
  64                  * because the can not be enabled simultaneously on a
  65                  * single SoC.
  66                  */
  67                 opp50-300000000 {
  68                         opp-hz = /bits/ 64 <300000000>;
  69                         opp-microvolt = <950000 931000 969000>;
  70                         opp-supported-hw = <0x06 0x0010>;
  71                         opp-suspend;
  72                 };
  73
  74                 opp100-275000000 {
  75                         opp-hz = /bits/ 64 <275000000>;
  76                         opp-microvolt = <1100000 1078000 1122000>;
  77                         opp-supported-hw = <0x01 0x00FF>;
  78                         opp-suspend;
  79                 };
  80
  81                 opp100-300000000 {
  82                         opp-hz = /bits/ 64 <300000000>;
  83                         opp-microvolt = <1100000 1078000 1122000>;
  84                         opp-supported-hw = <0x06 0x0020>;
  85                         opp-suspend;
  86                 };
  87
  88                 opp100-500000000 {
  89                         opp-hz = /bits/ 64 <500000000>;
  90                         opp-microvolt = <1100000 1078000 1122000>;
  91                         opp-supported-hw = <0x01 0xFFFF>;
  92                 };
  93
  94                 opp100-600000000 {
  95                         opp-hz = /bits/ 64 <600000000>;
  96                         opp-microvolt = <1100000 1078000 1122000>;
  97                         opp-supported-hw = <0x06 0x0040>;
  98                 };
  99
 100                 opp120-600000000 {
 101                         opp-hz = /bits/ 64 <600000000>;
 102                         opp-microvolt = <1200000 1176000 1224000>;
 103                         opp-supported-hw = <0x01 0xFFFF>;
 104                 };
 105
 106                 opp120-720000000 {
 107                         opp-hz = /bits/ 64 <720000000>;
 108                         opp-microvolt = <1200000 1176000 1224000>;
 109                         opp-supported-hw = <0x06 0x0080>;
 110                 };
 111
 112                 oppturbo-720000000 {
 113                         opp-hz = /bits/ 64 <720000000>;
 114                         opp-microvolt = <1260000 1234800 1285200>;
 115                         opp-supported-hw = <0x01 0xFFFF>;
 116                 };
 117
 118                 oppturbo-800000000 {
 119                         opp-hz = /bits/ 64 <800000000>;
 120                         opp-microvolt = <1260000 1234800 1285200>;
 121                         opp-supported-hw = <0x06 0x0100>;
 122                 };
 123
 124                 oppnitro-1000000000 {
 125                         opp-hz = /bits/ 64 <1000000000>;
 126                         opp-microvolt = <1325000 1298500 1351500>;
 127                         opp-supported-hw = <0x04 0x0200>;
 128                 };
 129         };
 130
 131         pmu {
 132                 compatible = "arm,cortex-a8-pmu";
 133                 interrupts = <3>;
 134         };
 135
 136         /*
 137          * The soc node represents the soc top level view. It is used for IPs
 138          * that are not memory mapped in the MPU view or for the MPU itself.
 139          */
 140         soc {
 141                 compatible = "ti,omap-infra";
 142                 mpu {
 143                         compatible = "ti,omap3-mpu";
 144                         ti,hwmods = "mpu";
 145                 };
 146         };
 147
 148         /*
 149          * XXX: Use a flat representation of the AM33XX interconnect.
 150          * The real AM33XX interconnect network is quite complex. Since
 151          * it will not bring real advantage to represent that in DT
 152          * for the moment, just use a fake OCP bus entry to represent
 153          * the whole bus hierarchy.
 154          */
 155         ocp {
 156                 compatible = "simple-bus";
 157                 #address-cells = <1>;
 158                 #size-cells = <1>;
 159                 ranges;
 160                 ti,hwmods = "l3_main";
 161
 162                 l4_wkup: l4_wkup@44c00000 {
 163                         compatible = "ti,am3-l4-wkup", "simple-bus";
 164                         #address-cells = <1>;
 165                         #size-cells = <1>;
 166                         ranges = <0 0x44c00000 0x280000>;
 167
 168                         wkup_m3: wkup_m3@100000 {
 169                                 compatible = "ti,am3352-wkup-m3";
 170                                 reg = <0x100000 0x4000>,
 171                                       <0x180000 0x2000>;
 172                                 reg-names = "umem", "dmem";
 173                                 ti,hwmods = "wkup_m3";
 174                                 ti,pm-firmware = "am335x-pm-firmware.elf";
 175                         };
 176
 177                         prcm: prcm@200000 {
 178                                 compatible = "ti,am3-prcm";
 179                                 reg = <0x200000 0x4000>;
 180
 181                                 prcm_clocks: clocks {
 182                                         #address-cells = <1>;
 183                                         #size-cells = <0>;
 184                                 };
 185
 186                                 prcm_clockdomains: clockdomains {
 187                                 };
 188                         };
 189
 190                         scm: scm@210000 {
 191                                 compatible = "ti,am3-scm", "simple-bus";
 192                                 reg = <0x210000 0x2000>;
 193                                 #address-cells = <1>;
 194                                 #size-cells = <1>;
 195                                 #pinctrl-cells = <1>;
 196                                 ranges = <0 0x210000 0x2000>;
 197
 198                                 am33xx_pinmux: pinmux@800 {
 199                                         compatible = "pinctrl-single";
 200                                         reg = <0x800 0x238>;
 201                                         #address-cells = <1>;
 202                                         #size-cells = <0>;
 203                                         #pinctrl-cells = <1>;
 204                                         pinctrl-single,register-width = <32>;
 205                                         pinctrl-single,function-mask = <0x7f>;
 206                                 };
 207
 208                                 scm_conf: scm_conf@0 {
 209                                         compatible = "syscon", "simple-bus";
 210                                         reg = <0x0 0x800>;
 211                                         #address-cells = <1>;
 212                                         #size-cells = <1>;
 213                                         ranges = <0 0 0x800>;
 214
 215                                         scm_clocks: clocks {
 216                                                 #address-cells = <1>;
 217                                                 #size-cells = <0>;
 218                                         };
 219                                 };
 220
 221                                 wkup_m3_ipc: wkup_m3_ipc@1324 {
 222                                         compatible = "ti,am3352-wkup-m3-ipc";
 223                                         reg = <0x1324 0x24>;
 224                                         interrupts = <78>;
 225                                         ti,rproc = <&wkup_m3>;
 226                                         mboxes = <&mailbox &mbox_wkupm3>;
 227                                 };
 228
 229                                 edma_xbar: dma-router@f90 {
 230                                         compatible = "ti,am335x-edma-crossbar";
 231                                         reg = <0xf90 0x40>;
 232                                         #dma-cells = <3>;
 233                                         dma-requests = <32>;
 234                                         dma-masters = <&edma>;
 235                                 };
 236
 237                                 scm_clockdomains: clockdomains {
 238                                 };
 239                         };
 240                 };
 241
 242                 intc: interrupt-controller@48200000 {
 243                         compatible = "ti,am33xx-intc";
 244                         interrupt-controller;
 245                         #interrupt-cells = <1>;
 246                         reg = <0x48200000 0x1000>;
 247                 };
 248
 249                 edma: edma@49000000 {
 250                         compatible = "ti,edma3-tpcc";
 251                         ti,hwmods = "tpcc";
 252                         reg =   <0x49000000 0x10000>;
 253                         reg-names = "edma3_cc";
 254                         interrupts = <12 13 14>;
 255                         interrupt-names = "edma3_ccint", "edma3_mperr",
 256                                           "edma3_ccerrint";
 257                         dma-requests = <64>;
 258                         #dma-cells = <2>;
 259
 260                         ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
 261                                    <&edma_tptc2 0>;
 262
 263                         ti,edma-memcpy-channels = <20 21>;
 264                 };
 265
 266                 edma_tptc0: tptc@49800000 {
 267                         compatible = "ti,edma3-tptc";
 268                         ti,hwmods = "tptc0";
 269                         reg =   <0x49800000 0x100000>;
 270                         interrupts = <112>;
 271                         interrupt-names = "edma3_tcerrint";
 272                 };
 273
 274                 edma_tptc1: tptc@49900000 {
 275                         compatible = "ti,edma3-tptc";
 276                         ti,hwmods = "tptc1";
 277                         reg =   <0x49900000 0x100000>;
 278                         interrupts = <113>;
 279                         interrupt-names = "edma3_tcerrint";
 280                 };
 281
 282                 edma_tptc2: tptc@49a00000 {
 283                         compatible = "ti,edma3-tptc";
 284                         ti,hwmods = "tptc2";
 285                         reg =   <0x49a00000 0x100000>;
 286                         interrupts = <114>;
 287                         interrupt-names = "edma3_tcerrint";
 288                 };
 289
 290                 gpio0: gpio@44e07000 {
 291                         compatible = "ti,omap4-gpio";
 292                         ti,hwmods = "gpio1";
 293                         gpio-controller;
 294                         #gpio-cells = <2>;
 295                         interrupt-controller;
 296                         #interrupt-cells = <2>;
 297                         reg = <0x44e07000 0x1000>;
 298                         interrupts = <96>;
 299                 };
 300
 301                 gpio1: gpio@4804c000 {
 302                         compatible = "ti,omap4-gpio";
 303                         ti,hwmods = "gpio2";
 304                         gpio-controller;
 305                         #gpio-cells = <2>;
 306                         interrupt-controller;
 307                         #interrupt-cells = <2>;
 308                         reg = <0x4804c000 0x1000>;
 309                         interrupts = <98>;
 310                 };
 311
 312                 gpio2: gpio@481ac000 {
 313                         compatible = "ti,omap4-gpio";
 314                         ti,hwmods = "gpio3";
 315                         gpio-controller;
 316                         #gpio-cells = <2>;
 317                         interrupt-controller;
 318                         #interrupt-cells = <2>;
 319                         reg = <0x481ac000 0x1000>;
 320                         interrupts = <32>;
 321                 };
 322
 323                 gpio3: gpio@481ae000 {
 324                         compatible = "ti,omap4-gpio";
 325                         ti,hwmods = "gpio4";
 326                         gpio-controller;
 327                         #gpio-cells = <2>;
 328                         interrupt-controller;
 329                         #interrupt-cells = <2>;
 330                         reg = <0x481ae000 0x1000>;
 331                         interrupts = <62>;
 332                 };
 333
 334                 uart0: serial@44e09000 {
 335                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 336                         ti,hwmods = "uart1";
 337                         clock-frequency = <48000000>;
 338                         reg = <0x44e09000 0x2000>;
 339                         interrupts = <72>;
 340                         status = "disabled";
 341                         dmas = <&edma 26 0>, <&edma 27 0>;
 342                         dma-names = "tx", "rx";
 343                 };
 344
 345                 uart1: serial@48022000 {
 346                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 347                         ti,hwmods = "uart2";
 348                         clock-frequency = <48000000>;
 349                         reg = <0x48022000 0x2000>;
 350                         interrupts = <73>;
 351                         status = "disabled";
 352                         dmas = <&edma 28 0>, <&edma 29 0>;
 353                         dma-names = "tx", "rx";
 354                 };
 355
 356                 uart2: serial@48024000 {
 357                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 358                         ti,hwmods = "uart3";
 359                         clock-frequency = <48000000>;
 360                         reg = <0x48024000 0x2000>;
 361                         interrupts = <74>;
 362                         status = "disabled";
 363                         dmas = <&edma 30 0>, <&edma 31 0>;
 364                         dma-names = "tx", "rx";
 365                 };
 366
 367                 uart3: serial@481a6000 {
 368                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 369                         ti,hwmods = "uart4";
 370                         clock-frequency = <48000000>;
 371                         reg = <0x481a6000 0x2000>;
 372                         interrupts = <44>;
 373                         status = "disabled";
 374                 };
 375
 376                 uart4: serial@481a8000 {
 377                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 378                         ti,hwmods = "uart5";
 379                         clock-frequency = <48000000>;
 380                         reg = <0x481a8000 0x2000>;
 381                         interrupts = <45>;
 382                         status = "disabled";
 383                 };
 384
 385                 uart5: serial@481aa000 {
 386                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 387                         ti,hwmods = "uart6";
 388                         clock-frequency = <48000000>;
 389                         reg = <0x481aa000 0x2000>;
 390                         interrupts = <46>;
 391                         status = "disabled";
 392                 };
 393
 394                 i2c0: i2c@44e0b000 {
 395                         compatible = "ti,omap4-i2c";
 396                         #address-cells = <1>;
 397                         #size-cells = <0>;
 398                         ti,hwmods = "i2c1";
 399                         reg = <0x44e0b000 0x1000>;
 400                         interrupts = <70>;
 401                         status = "disabled";
 402                 };
 403
 404                 i2c1: i2c@4802a000 {
 405                         compatible = "ti,omap4-i2c";
 406                         #address-cells = <1>;
 407                         #size-cells = <0>;
 408                         ti,hwmods = "i2c2";
 409                         reg = <0x4802a000 0x1000>;
 410                         interrupts = <71>;
 411                         status = "disabled";
 412                 };
 413
 414                 i2c2: i2c@4819c000 {
 415                         compatible = "ti,omap4-i2c";
 416                         #address-cells = <1>;
 417                         #size-cells = <0>;
 418                         ti,hwmods = "i2c3";
 419                         reg = <0x4819c000 0x1000>;
 420                         interrupts = <30>;
 421                         status = "disabled";
 422                 };
 423
 424                 mmc1: mmc@48060000 {
 425                         compatible = "ti,omap4-hsmmc";
 426                         ti,hwmods = "mmc1";
 427                         ti,dual-volt;
 428                         ti,needs-special-reset;
 429                         ti,needs-special-hs-handling;
 430                         dmas = <&edma_xbar 24 0 0
 431                                 &edma_xbar 25 0 0>;
 432                         dma-names = "tx", "rx";
 433                         interrupts = <64>;
 434                         reg = <0x48060000 0x1000>;
 435                         status = "disabled";
 436                 };
 437
 438                 mmc2: mmc@481d8000 {
 439                         compatible = "ti,omap4-hsmmc";
 440                         ti,hwmods = "mmc2";
 441                         ti,needs-special-reset;
 442                         dmas = <&edma 2 0
 443                                 &edma 3 0>;
 444                         dma-names = "tx", "rx";
 445                         interrupts = <28>;
 446                         reg = <0x481d8000 0x1000>;
 447                         status = "disabled";
 448                 };
 449
 450                 mmc3: mmc@47810000 {
 451                         compatible = "ti,omap4-hsmmc";
 452                         ti,hwmods = "mmc3";
 453                         ti,needs-special-reset;
 454                         interrupts = <29>;
 455                         reg = <0x47810000 0x1000>;
 456                         status = "disabled";
 457                 };
 458
 459                 hwspinlock: spinlock@480ca000 {
 460                         compatible = "ti,omap4-hwspinlock";
 461                         reg = <0x480ca000 0x1000>;
 462                         ti,hwmods = "spinlock";
 463                         #hwlock-cells = <1>;
 464                 };
 465
 466                 wdt2: wdt@44e35000 {
 467                         compatible = "ti,omap3-wdt";
 468                         ti,hwmods = "wd_timer2";
 469                         reg = <0x44e35000 0x1000>;
 470                         interrupts = <91>;
 471                 };
 472
 473                 dcan0: can@481cc000 {
 474                         compatible = "ti,am3352-d_can";
 475                         ti,hwmods = "d_can0";
 476                         reg = <0x481cc000 0x2000>;
 477                         clocks = <&dcan0_fck>;
 478                         clock-names = "fck";
 479                         syscon-raminit = <&scm_conf 0x644 0>;
 480                         interrupts = <52>;
 481                         status = "disabled";
 482                 };
 483
 484                 dcan1: can@481d0000 {
 485                         compatible = "ti,am3352-d_can";
 486                         ti,hwmods = "d_can1";
 487                         reg = <0x481d0000 0x2000>;
 488                         clocks = <&dcan1_fck>;
 489                         clock-names = "fck";
 490                         syscon-raminit = <&scm_conf 0x644 1>;
 491                         interrupts = <55>;
 492                         status = "disabled";
 493                 };
 494
 495                 mailbox: mailbox@480C8000 {
 496                         compatible = "ti,omap4-mailbox";
 497                         reg = <0x480C8000 0x200>;
 498                         interrupts = <77>;
 499                         ti,hwmods = "mailbox";
 500                         #mbox-cells = <1>;
 501                         ti,mbox-num-users = <4>;
 502                         ti,mbox-num-fifos = <8>;
 503                         mbox_wkupm3: wkup_m3 {
 504                                 ti,mbox-send-noirq;
 505                                 ti,mbox-tx = <0 0 0>;
 506                                 ti,mbox-rx = <0 0 3>;
 507                         };
 508                 };
 509
 510                 timer1: timer@44e31000 {
 511                         compatible = "ti,am335x-timer-1ms";
 512                         reg = <0x44e31000 0x400>;
 513                         interrupts = <67>;
 514                         ti,hwmods = "timer1";
 515                         ti,timer-alwon;
 516                 };
 517
 518                 timer2: timer@48040000 {
 519                         compatible = "ti,am335x-timer";
 520                         reg = <0x48040000 0x400>;
 521                         interrupts = <68>;
 522                         ti,hwmods = "timer2";
 523                 };
 524
 525                 timer3: timer@48042000 {
 526                         compatible = "ti,am335x-timer";
 527                         reg = <0x48042000 0x400>;
 528                         interrupts = <69>;
 529                         ti,hwmods = "timer3";
 530                 };
 531
 532                 timer4: timer@48044000 {
 533                         compatible = "ti,am335x-timer";
 534                         reg = <0x48044000 0x400>;
 535                         interrupts = <92>;
 536                         ti,hwmods = "timer4";
 537                         ti,timer-pwm;
 538                 };
 539
 540                 timer5: timer@48046000 {
 541                         compatible = "ti,am335x-timer";
 542                         reg = <0x48046000 0x400>;
 543                         interrupts = <93>;
 544                         ti,hwmods = "timer5";
 545                         ti,timer-pwm;
 546                 };
 547
 548                 timer6: timer@48048000 {
 549                         compatible = "ti,am335x-timer";
 550                         reg = <0x48048000 0x400>;
 551                         interrupts = <94>;
 552                         ti,hwmods = "timer6";
 553                         ti,timer-pwm;
 554                 };
 555
 556                 timer7: timer@4804a000 {
 557                         compatible = "ti,am335x-timer";
 558                         reg = <0x4804a000 0x400>;
 559                         interrupts = <95>;
 560                         ti,hwmods = "timer7";
 561                         ti,timer-pwm;
 562                 };
 563
 564                 rtc: rtc@44e3e000 {
 565                         compatible = "ti,am3352-rtc", "ti,da830-rtc";
 566                         reg = <0x44e3e000 0x1000>;
 567                         interrupts = <75
 568                                       76>;
 569                         ti,hwmods = "rtc";
 570                         clocks = <&clkdiv32k_ick>;
 571                         clock-names = "int-clk";
 572                 };
 573
 574                 spi0: spi@48030000 {
 575                         compatible = "ti,omap4-mcspi";
 576                         #address-cells = <1>;
 577                         #size-cells = <0>;
 578                         reg = <0x48030000 0x400>;
 579                         interrupts = <65>;
 580                         ti,spi-num-cs = <2>;
 581                         ti,hwmods = "spi0";
 582                         dmas = <&edma 16 0
 583                                 &edma 17 0
 584                                 &edma 18 0
 585                                 &edma 19 0>;
 586                         dma-names = "tx0", "rx0", "tx1", "rx1";
 587                         status = "disabled";
 588                 };
 589
 590                 spi1: spi@481a0000 {
 591                         compatible = "ti,omap4-mcspi";
 592                         #address-cells = <1>;
 593                         #size-cells = <0>;
 594                         reg = <0x481a0000 0x400>;
 595                         interrupts = <125>;
 596                         ti,spi-num-cs = <2>;
 597                         ti,hwmods = "spi1";
 598                         dmas = <&edma 42 0
 599                                 &edma 43 0
 600                                 &edma 44 0
 601                                 &edma 45 0>;
 602                         dma-names = "tx0", "rx0", "tx1", "rx1";
 603                         status = "disabled";
 604                 };
 605
 606                 usb: usb@47400000 {
 607                         compatible = "ti,am33xx-usb";
 608                         reg = <0x47400000 0x1000>;
 609                         ranges;
 610                         #address-cells = <1>;
 611                         #size-cells = <1>;
 612                         ti,hwmods = "usb_otg_hs";
 613                         status = "disabled";
 614
 615                         usb_ctrl_mod: control@44e10620 {
 616                                 compatible = "ti,am335x-usb-ctrl-module";
 617                                 reg = <0x44e10620 0x10
 618                                         0x44e10648 0x4>;
 619                                 reg-names = "phy_ctrl", "wakeup";
 620                                 status = "disabled";
 621                         };
 622
 623                         usb0_phy: usb-phy@47401300 {
 624                                 compatible = "ti,am335x-usb-phy";
 625                                 reg = <0x47401300 0x100>;
 626                                 reg-names = "phy";
 627                                 status = "disabled";
 628                                 ti,ctrl_mod = <&usb_ctrl_mod>;
 629                         };
 630
 631                         usb0: usb@47401000 {
 632                                 compatible = "ti,musb-am33xx";
 633                                 status = "disabled";
 634                                 reg = <0x47401400 0x400
 635                                         0x47401000 0x200>;
 636                                 reg-names = "mc", "control";
 637
 638                                 interrupts = <18>;
 639                                 interrupt-names = "mc";
 640                                 dr_mode = "otg";
 641                                 mentor,multipoint = <1>;
 642                                 mentor,num-eps = <16>;
 643                                 mentor,ram-bits = <12>;
 644                                 mentor,power = <500>;
 645                                 phys = <&usb0_phy>;
 646
 647                                 dmas = <&cppi41dma  0 0 &cppi41dma  1 0
 648                                         &cppi41dma  2 0 &cppi41dma  3 0
 649                                         &cppi41dma  4 0 &cppi41dma  5 0
 650                                         &cppi41dma  6 0 &cppi41dma  7 0
 651                                         &cppi41dma  8 0 &cppi41dma  9 0
 652                                         &cppi41dma 10 0 &cppi41dma 11 0
 653                                         &cppi41dma 12 0 &cppi41dma 13 0
 654                                         &cppi41dma 14 0 &cppi41dma  0 1
 655                                         &cppi41dma  1 1 &cppi41dma  2 1
 656                                         &cppi41dma  3 1 &cppi41dma  4 1
 657                                         &cppi41dma  5 1 &cppi41dma  6 1
 658                                         &cppi41dma  7 1 &cppi41dma  8 1
 659                                         &cppi41dma  9 1 &cppi41dma 10 1
 660                                         &cppi41dma 11 1 &cppi41dma 12 1
 661                                         &cppi41dma 13 1 &cppi41dma 14 1>;
 662                                 dma-names =
 663                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 664                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 665                                         "rx14", "rx15",
 666                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 667                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 668                                         "tx14", "tx15";
 669                         };
 670
 671                         usb1_phy: usb-phy@47401b00 {
 672                                 compatible = "ti,am335x-usb-phy";
 673                                 reg = <0x47401b00 0x100>;
 674                                 reg-names = "phy";
 675                                 status = "disabled";
 676                                 ti,ctrl_mod = <&usb_ctrl_mod>;
 677                         };
 678
 679                         usb1: usb@47401800 {
 680                                 compatible = "ti,musb-am33xx";
 681                                 status = "disabled";
 682                                 reg = <0x47401c00 0x400
 683                                         0x47401800 0x200>;
 684                                 reg-names = "mc", "control";
 685                                 interrupts = <19>;
 686                                 interrupt-names = "mc";
 687                                 dr_mode = "otg";
 688                                 mentor,multipoint = <1>;
 689                                 mentor,num-eps = <16>;
 690                                 mentor,ram-bits = <12>;
 691                                 mentor,power = <500>;
 692                                 phys = <&usb1_phy>;
 693
 694                                 dmas = <&cppi41dma 15 0 &cppi41dma 16 0
 695                                         &cppi41dma 17 0 &cppi41dma 18 0
 696                                         &cppi41dma 19 0 &cppi41dma 20 0
 697                                         &cppi41dma 21 0 &cppi41dma 22 0
 698                                         &cppi41dma 23 0 &cppi41dma 24 0
 699                                         &cppi41dma 25 0 &cppi41dma 26 0
 700                                         &cppi41dma 27 0 &cppi41dma 28 0
 701                                         &cppi41dma 29 0 &cppi41dma 15 1
 702                                         &cppi41dma 16 1 &cppi41dma 17 1
 703                                         &cppi41dma 18 1 &cppi41dma 19 1
 704                                         &cppi41dma 20 1 &cppi41dma 21 1
 705                                         &cppi41dma 22 1 &cppi41dma 23 1
 706                                         &cppi41dma 24 1 &cppi41dma 25 1
 707                                         &cppi41dma 26 1 &cppi41dma 27 1
 708                                         &cppi41dma 28 1 &cppi41dma 29 1>;
 709                                 dma-names =
 710                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 711                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 712                                         "rx14", "rx15",
 713                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 714                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 715                                         "tx14", "tx15";
 716                         };
 717
 718                         cppi41dma: dma-controller@47402000 {
 719                                 compatible = "ti,am3359-cppi41";
 720                                 reg =  <0x47400000 0x1000
 721                                         0x47402000 0x1000
 722                                         0x47403000 0x1000
 723                                         0x47404000 0x4000>;
 724                                 reg-names = "glue", "controller", "scheduler", "queuemgr";
 725                                 interrupts = <17>;
 726                                 interrupt-names = "glue";
 727                                 #dma-cells = <2>;
 728                                 #dma-channels = <30>;
 729                                 #dma-requests = <256>;
 730                                 status = "disabled";
 731                         };
 732                 };
 733
 734                 epwmss0: epwmss@48300000 {
 735                         compatible = "ti,am33xx-pwmss";
 736                         reg = <0x48300000 0x10>;
 737                         ti,hwmods = "epwmss0";
 738                         #address-cells = <1>;
 739                         #size-cells = <1>;
 740                         status = "disabled";
 741                         ranges = <0x48300100 0x48300100 0x80   /* ECAP */
 742                                   0x48300180 0x48300180 0x80   /* EQEP */
 743                                   0x48300200 0x48300200 0x80>; /* EHRPWM */
 744
 745                         ecap0: ecap@48300100 {
 746                                 compatible = "ti,am3352-ecap",
 747                                              "ti,am33xx-ecap";
 748                                 #pwm-cells = <3>;
 749                                 reg = <0x48300100 0x80>;
 750                                 clocks = <&l4ls_gclk>;
 751                                 clock-names = "fck";
 752                                 interrupts = <31>;
 753                                 interrupt-names = "ecap0";
 754                                 status = "disabled";
 755                         };
 756
 757                         ehrpwm0: pwm@48300200 {
 758                                 compatible = "ti,am3352-ehrpwm",
 759                                              "ti,am33xx-ehrpwm";
 760                                 #pwm-cells = <3>;
 761                                 reg = <0x48300200 0x80>;
 762                                 clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
 763                                 clock-names = "tbclk", "fck";
 764                                 status = "disabled";
 765                         };
 766                 };
 767
 768                 epwmss1: epwmss@48302000 {
 769                         compatible = "ti,am33xx-pwmss";
 770                         reg = <0x48302000 0x10>;
 771                         ti,hwmods = "epwmss1";
 772                         #address-cells = <1>;
 773                         #size-cells = <1>;
 774                         status = "disabled";
 775                         ranges = <0x48302100 0x48302100 0x80   /* ECAP */
 776                                   0x48302180 0x48302180 0x80   /* EQEP */
 777                                   0x48302200 0x48302200 0x80>; /* EHRPWM */
 778
 779                         ecap1: ecap@48302100 {
 780                                 compatible = "ti,am3352-ecap",
 781                                              "ti,am33xx-ecap";
 782                                 #pwm-cells = <3>;
 783                                 reg = <0x48302100 0x80>;
 784                                 clocks = <&l4ls_gclk>;
 785                                 clock-names = "fck";
 786                                 interrupts = <47>;
 787                                 interrupt-names = "ecap1";
 788                                 status = "disabled";
 789                         };
 790
 791                         ehrpwm1: pwm@48302200 {
 792                                 compatible = "ti,am3352-ehrpwm",
 793                                              "ti,am33xx-ehrpwm";
 794                                 #pwm-cells = <3>;
 795                                 reg = <0x48302200 0x80>;
 796                                 clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
 797                                 clock-names = "tbclk", "fck";
 798                                 status = "disabled";
 799                         };
 800                 };
 801
 802                 epwmss2: epwmss@48304000 {
 803                         compatible = "ti,am33xx-pwmss";
 804                         reg = <0x48304000 0x10>;
 805                         ti,hwmods = "epwmss2";
 806                         #address-cells = <1>;
 807                         #size-cells = <1>;
 808                         status = "disabled";
 809                         ranges = <0x48304100 0x48304100 0x80   /* ECAP */
 810                                   0x48304180 0x48304180 0x80   /* EQEP */
 811                                   0x48304200 0x48304200 0x80>; /* EHRPWM */
 812
 813                         ecap2: ecap@48304100 {
 814                                 compatible = "ti,am3352-ecap",
 815                                              "ti,am33xx-ecap";
 816                                 #pwm-cells = <3>;
 817                                 reg = <0x48304100 0x80>;
 818                                 clocks = <&l4ls_gclk>;
 819                                 clock-names = "fck";
 820                                 interrupts = <61>;
 821                                 interrupt-names = "ecap2";
 822                                 status = "disabled";
 823                         };
 824
 825                         ehrpwm2: pwm@48304200 {
 826                                 compatible = "ti,am3352-ehrpwm",
 827                                              "ti,am33xx-ehrpwm";
 828                                 #pwm-cells = <3>;
 829                                 reg = <0x48304200 0x80>;
 830                                 clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
 831                                 clock-names = "tbclk", "fck";
 832                                 status = "disabled";
 833                         };
 834                 };
 835
 836                 mac: ethernet@4a100000 {
 837                         compatible = "ti,am335x-cpsw","ti,cpsw";
 838                         ti,hwmods = "cpgmac0";
 839                         clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
 840                         clock-names = "fck", "cpts";
 841                         cpdma_channels = <8>;
 842                         ale_entries = <1024>;
 843                         bd_ram_size = <0x2000>;
 844                         mac_control = <0x20>;
 845                         slaves = <2>;
 846                         active_slave = <0>;
 847                         cpts_clock_mult = <0x80000000>;
 848                         cpts_clock_shift = <29>;
 849                         reg = <0x4a100000 0x800
 850                                0x4a101200 0x100>;
 851                         #address-cells = <1>;
 852                         #size-cells = <1>;
 853                         /*
 854                          * c0_rx_thresh_pend
 855                          * c0_rx_pend
 856                          * c0_tx_pend
 857                          * c0_misc_pend
 858                          */
 859                         interrupts = <40 41 42 43>;
 860                         ranges;
 861                         syscon = <&scm_conf>;
 862                         status = "disabled";
 863
 864                         davinci_mdio: mdio@4a101000 {
 865                                 compatible = "ti,cpsw-mdio","ti,davinci_mdio";
 866                                 #address-cells = <1>;
 867                                 #size-cells = <0>;
 868                                 ti,hwmods = "davinci_mdio";
 869                                 bus_freq = <1000000>;
 870                                 reg = <0x4a101000 0x100>;
 871                                 status = "disabled";
 872                         };
 873
 874                         cpsw_emac0: slave@4a100200 {
 875                                 /* Filled in by U-Boot */
 876                                 mac-address = [ 00 00 00 00 00 00 ];
 877                         };
 878
 879                         cpsw_emac1: slave@4a100300 {
 880                                 /* Filled in by U-Boot */
 881                                 mac-address = [ 00 00 00 00 00 00 ];
 882                         };
 883
 884                         phy_sel: cpsw-phy-sel@44e10650 {
 885                                 compatible = "ti,am3352-cpsw-phy-sel";
 886                                 reg= <0x44e10650 0x4>;
 887                                 reg-names = "gmii-sel";
 888                         };
 889                 };
 890
 891                 ocmcram: ocmcram@40300000 {
 892                         compatible = "mmio-sram";
 893                         reg = <0x40300000 0x10000>; /* 64k */
 894                 };
 895
 896                 elm: elm@48080000 {
 897                         compatible = "ti,am3352-elm";
 898                         reg = <0x48080000 0x2000>;
 899                         interrupts = <4>;
 900                         ti,hwmods = "elm";
 901                         status = "disabled";
 902                 };
 903
 904                 lcdc: lcdc@4830e000 {
 905                         compatible = "ti,am33xx-tilcdc";
 906                         reg = <0x4830e000 0x1000>;
 907                         interrupts = <36>;
 908                         ti,hwmods = "lcdc";
 909                         status = "disabled";
 910                 };
 911
 912                 tscadc: tscadc@44e0d000 {
 913                         compatible = "ti,am3359-tscadc";
 914                         reg = <0x44e0d000 0x1000>;
 915                         interrupts = <16>;
 916                         ti,hwmods = "adc_tsc";
 917                         status = "disabled";
 918                         dmas = <&edma 53 0>, <&edma 57 0>;
 919                         dma-names = "fifo0", "fifo1";
 920
 921                         tsc {
 922                                 compatible = "ti,am3359-tsc";
 923                         };
 924                         am335x_adc: adc {
 925                                 #io-channel-cells = <1>;
 926                                 compatible = "ti,am3359-adc";
 927                         };
 928                 };
 929
 930                 gpmc: gpmc@50000000 {
 931                         compatible = "ti,am3352-gpmc";
 932                         ti,hwmods = "gpmc";
 933                         ti,no-idle-on-init;
 934                         reg = <0x50000000 0x2000>;
 935                         interrupts = <100>;
 936                         dmas = <&edma 52 0>;
 937                         dma-names = "rxtx";
 938                         gpmc,num-cs = <7>;
 939                         gpmc,num-waitpins = <2>;
 940                         #address-cells = <2>;
 941                         #size-cells = <1>;
 942                         interrupt-controller;
 943                         #interrupt-cells = <2>;
 944                         gpio-controller;
 945                         #gpio-cells = <2>;
 946                         status = "disabled";
 947                 };
 948
 949                 sham: sham@53100000 {
 950                         compatible = "ti,omap4-sham";
 951                         ti,hwmods = "sham";
 952                         reg = <0x53100000 0x200>;
 953                         interrupts = <109>;
 954                         dmas = <&edma 36 0>;
 955                         dma-names = "rx";
 956                 };
 957
 958                 aes: aes@53500000 {
 959                         compatible = "ti,omap4-aes";
 960                         ti,hwmods = "aes";
 961                         reg = <0x53500000 0xa0>;
 962                         interrupts = <103>;
 963                         dmas = <&edma 6 0>,
 964                                <&edma 5 0>;
 965                         dma-names = "tx", "rx";
 966                 };
 967
 968                 mcasp0: mcasp@48038000 {
 969                         compatible = "ti,am33xx-mcasp-audio";
 970                         ti,hwmods = "mcasp0";
 971                         reg = <0x48038000 0x2000>,
 972                               <0x46000000 0x400000>;
 973                         reg-names = "mpu", "dat";
 974                         interrupts = <80>, <81>;
 975                         interrupt-names = "tx", "rx";
 976                         status = "disabled";
 977                         dmas = <&edma 8 2>,
 978                                 <&edma 9 2>;
 979                         dma-names = "tx", "rx";
 980                 };
 981
 982                 mcasp1: mcasp@4803C000 {
 983                         compatible = "ti,am33xx-mcasp-audio";
 984                         ti,hwmods = "mcasp1";
 985                         reg = <0x4803C000 0x2000>,
 986                               <0x46400000 0x400000>;
 987                         reg-names = "mpu", "dat";
 988                         interrupts = <82>, <83>;
 989                         interrupt-names = "tx", "rx";
 990                         status = "disabled";
 991                         dmas = <&edma 10 2>,
 992                                 <&edma 11 2>;
 993                         dma-names = "tx", "rx";
 994                 };
 995
 996                 rng: rng@48310000 {
 997                         compatible = "ti,omap4-rng";
 998                         ti,hwmods = "rng";
 999                         reg = <0x48310000 0x2000>;
1000                         interrupts = <111>;
1001                 };
1002         };
1003 };
1004
1005 /include/ "am33xx-clocks.dtsi"