arch/arm/boot/dts/am335x-shc.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * support for the bosch am335x based shc c3 board
   4  *
   5  * Copyright, C) 2015 Heiko Schocher <hs@denx.de>
   6  *
   7  */
   8 /dts-v1/;
   9
  10 #include "am33xx.dtsi"
  11 #include <dt-bindings/input/input.h>
  12
  13 / {
  14         model = "Bosch SHC";
  15         compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
  16
  17         aliases {
  18                 mmcblk0 = &mmc1;
  19                 mmcblk1 = &mmc2;
  20         };
  21
  22         cpus {
  23                 cpu@0 {
  24                         /*
  25                          * To consider voltage drop between PMIC and SoC,
  26                          * tolerance value is reduced to 2% from 4% and
  27                          * voltage value is increased as a precaution.
  28                          */
  29                         operating-points = <
  30                                 /* kHz    uV */
  31                                 594000  1225000
  32                                 294000  1125000
  33                         >;
  34                         voltage-tolerance = <2>; /* 2 percentage */
  35                         cpu0-supply = <&dcdc2_reg>;
  36                 };
  37         };
  38
  39         gpio_keys {
  40                 compatible = "gpio-keys";
  41
  42                 back_button {
  43                         label = "Back Button";
  44                         gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
  45                         linux,code = <KEY_BACK>;
  46                         debounce-interval = <1000>;
  47                         wakeup-source;
  48                 };
  49
  50                 front_button {
  51                         label = "Front Button";
  52                         gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
  53                         linux,code = <KEY_FRONT>;
  54                         debounce-interval = <1000>;
  55                         wakeup-source;
  56                 };
  57         };
  58
  59         leds {
  60                 pinctrl-names = "default";
  61                 pinctrl-0 = <&user_leds_s0>;
  62
  63                 compatible = "gpio-leds";
  64
  65                 led1 {
  66                         label = "shc:power:red";
  67                         gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
  68                         default-state = "off";
  69                 };
  70
  71                 led2 {
  72                         label = "shc:power:bl";
  73                         gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
  74                         linux,default-trigger = "timer";
  75                         default-state = "on";
  76                 };
  77
  78                 led3 {
  79                         label = "shc:lan:red";
  80                         gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
  81                         default-state = "off";
  82                 };
  83
  84                 led4 {
  85                         label = "shc:lan:bl";
  86                         gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
  87                         default-state = "off";
  88                 };
  89
  90                 led5 {
  91                         label = "shc:cloud:red";
  92                         gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
  93                         default-state = "off";
  94                 };
  95
  96                 led6 {
  97                         label = "shc:cloud:bl";
  98                         gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
  99                         default-state = "off";
 100                 };
 101         };
 102
 103         memory@80000000 {
 104                 device_type = "memory";
 105                 reg = <0x80000000 0x20000000>; /* 512 MB */
 106         };
 107
 108         vmmcsd_fixed: fixedregulator0 {
 109                 compatible = "regulator-fixed";
 110                 regulator-name = "vmmcsd_fixed";
 111                 regulator-min-microvolt = <3300000>;
 112                 regulator-max-microvolt = <3300000>;
 113         };
 114 };
 115
 116 &aes {
 117         status = "okay";
 118 };
 119
 120 &cppi41dma  {
 121         status = "okay";
 122 };
 123
 124 &davinci_mdio {
 125         pinctrl-names = "default", "sleep";
 126         pinctrl-0 = <&davinci_mdio_default>;
 127         pinctrl-1 = <&davinci_mdio_sleep>;
 128         status = "okay";
 129
 130         ethernetphy0: ethernet-phy@0 {
 131                 reg = <0>;
 132                 smsc,disable-energy-detect;
 133         };
 134 };
 135
 136 &epwmss1 {
 137         status = "okay";
 138
 139         ehrpwm1: pwm@200 {
 140                 pinctrl-names = "default";
 141                 pinctrl-0 = <&ehrpwm1_pins>;
 142                 status = "okay";
 143         };
 144 };
 145
 146 &gpio1 {
 147         hmtc_rst {
 148                 gpio-hog;
 149                 gpios = <24 GPIO_ACTIVE_LOW>;
 150                 output-high;
 151                 line-name = "homematic_reset";
 152         };
 153
 154         hmtc_prog {
 155                 gpio-hog;
 156                 gpios = <27 GPIO_ACTIVE_LOW>;
 157                 output-high;
 158                 line-name = "homematic_program";
 159         };
 160 };
 161
 162 &gpio3 {
 163         zgb_rst {
 164                 gpio-hog;
 165                 gpios = <18 GPIO_ACTIVE_LOW>;
 166                 output-low;
 167                 line-name = "zigbee_reset";
 168         };
 169
 170         zgb_boot {
 171                 gpio-hog;
 172                 gpios = <19 GPIO_ACTIVE_HIGH>;
 173                 output-high;
 174                 line-name = "zigbee_boot";
 175         };
 176 };
 177
 178 &i2c0 {
 179         pinctrl-names = "default";
 180         pinctrl-0 = <&i2c0_pins>;
 181         status = "okay";
 182         clock-frequency = <400000>;
 183
 184         tps: tps@24 {
 185                 reg = <0x24>;
 186         };
 187
 188         at24@50 {
 189                 compatible = "atmel,24c32";
 190                 pagesize = <32>;
 191                 reg = <0x50>;
 192         };
 193
 194         pcf8563@51 {
 195                 compatible = "nxp,pcf8563";
 196                 reg = <0x51>;
 197         };
 198 };
 199
 200 &mac {
 201         pinctrl-names = "default", "sleep";
 202         pinctrl-0 = <&cpsw_default>;
 203         pinctrl-1 = <&cpsw_sleep>;
 204         status = "okay";
 205         slaves = <1>;
 206         cpsw_emac0: slave@200 {
 207                 phy-mode = "mii";
 208                 phy-handle = <&ethernetphy0>;
 209         };
 210 };
 211
 212 &mmc1 {
 213         pinctrl-names = "default";
 214         pinctrl-0 = <&mmc1_pins>;
 215         bus-width = <0x4>;
 216         cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 217         cd-inverted;
 218         max-frequency = <26000000>;
 219         vmmc-supply = <&vmmcsd_fixed>;
 220         status = "okay";
 221 };
 222
 223 &mmc2 {
 224         pinctrl-names = "default";
 225         pinctrl-0 = <&emmc_pins>;
 226         bus-width = <8>;
 227         max-frequency = <26000000>;
 228         sd-uhs-sdr25;
 229         vmmc-supply = <&vmmcsd_fixed>;
 230         status = "okay";
 231 };
 232
 233 &mmc3 {
 234         pinctrl-names = "default";
 235         pinctrl-0 = <&mmc3_pins>;
 236         bus-width = <4>;
 237         cap-power-off-card;
 238         max-frequency = <26000000>;
 239         sd-uhs-sdr25;
 240         vmmc-supply = <&vmmcsd_fixed>;
 241         status = "okay";
 242 };
 243
 244 &rtc {
 245         ti,no-init;
 246 };
 247
 248 &sham {
 249         status = "okay";
 250 };
 251
 252 &tps {
 253         compatible = "ti,tps65217";
 254         ti,pmic-shutdown-controller;
 255
 256         regulators {
 257                 #address-cells = <1>;
 258                 #size-cells = <0>;
 259
 260                 dcdc1_reg: regulator@0 {
 261                         reg = <0>;
 262                         regulator-name = "vdds_dpr";
 263                         regulator-compatible = "dcdc1";
 264                         regulator-min-microvolt = <1300000>;
 265                         regulator-max-microvolt = <1450000>;
 266                         regulator-boot-on;
 267                         regulator-always-on;
 268                 };
 269
 270                 dcdc2_reg: regulator@1 {
 271                         reg = <1>;
 272                         /*
 273                          * VDD_MPU voltage limits 0.95V - 1.26V with
 274                          * +/-4% tolerance
 275                          */
 276                         regulator-compatible = "dcdc2";
 277                         regulator-name = "vdd_mpu";
 278                         regulator-min-microvolt = <925000>;
 279                         regulator-max-microvolt = <1375000>;
 280                         regulator-boot-on;
 281                         regulator-always-on;
 282                         regulator-ramp-delay = <70000>;
 283                 };
 284
 285                 dcdc3_reg: regulator@2 {
 286                         reg = <2>;
 287                         /*
 288                          * VDD_CORE voltage limits 0.95V - 1.1V with
 289                          * +/-4% tolerance
 290                          */
 291                         regulator-name = "vdd_core";
 292                         regulator-compatible = "dcdc3";
 293                         regulator-min-microvolt = <925000>;
 294                         regulator-max-microvolt = <1125000>;
 295                         regulator-boot-on;
 296                         regulator-always-on;
 297                 };
 298
 299                 ldo1_reg: regulator@3 {
 300                         reg = <3>;
 301                         regulator-name = "vio,vrtc,vdds";
 302                         regulator-compatible = "ldo1";
 303                         regulator-min-microvolt = <1000000>;
 304                         regulator-max-microvolt = <1800000>;
 305                         regulator-always-on;
 306                 };
 307
 308                 ldo2_reg: regulator@4 {
 309                         reg = <4>;
 310                         regulator-name = "vdd_3v3aux";
 311                         regulator-compatible = "ldo2";
 312                         regulator-min-microvolt = <900000>;
 313                         regulator-max-microvolt = <3300000>;
 314                         regulator-always-on;
 315                 };
 316
 317                 ldo3_reg: regulator@5 {
 318                         reg = <5>;
 319                         regulator-name = "vdd_1v8";
 320                         regulator-compatible = "ldo3";
 321                         regulator-min-microvolt = <900000>;
 322                         regulator-max-microvolt = <1800000>;
 323                         regulator-always-on;
 324                 };
 325
 326                 ldo4_reg: regulator@6 {
 327                         reg = <6>;
 328                         regulator-name = "vdd_3v3a";
 329                         regulator-compatible = "ldo4";
 330                         regulator-min-microvolt = <1800000>;
 331                         regulator-max-microvolt = <3300000>;
 332                         regulator-always-on;
 333                 };
 334         };
 335 };
 336
 337 &uart0 {
 338         pinctrl-names = "default";
 339         pinctrl-0 = <&uart0_pins>;
 340         status = "okay";
 341 };
 342
 343 &uart1 {
 344         pinctrl-names = "default";
 345         pinctrl-0 = <&uart1_pins>;
 346         status = "okay";
 347 };
 348
 349 &uart2 {
 350         pinctrl-names = "default";
 351         pinctrl-0 = <&uart2_pins>;
 352         status = "okay";
 353 };
 354
 355 &uart4 {
 356         pinctrl-names = "default";
 357         pinctrl-0 = <&uart4_pins>;
 358         status = "okay";
 359 };
 360
 361 &usb {
 362         status = "okay";
 363 };
 364
 365 &usb_ctrl_mod {
 366         status = "okay";
 367 };
 368
 369 &usb1_phy {
 370         status = "okay";
 371 };
 372
 373 &usb1 {
 374         status = "okay";
 375         dr_mode = "host";
 376 };
 377
 378 &am33xx_pinmux {
 379         pinctrl-names = "default";
 380         pinctrl-0 = <&clkout2_pin>;
 381
 382         clkout2_pin: pinmux_clkout2_pin {
 383                 pinctrl-single,pins = <
 384                         /* xdma_event_intr1.clkout2 */
 385                         AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6)
 386                 >;
 387         };
 388
 389         cpsw_default: cpsw_default {
 390                 pinctrl-single,pins = <
 391                         /* Slave 1 */
 392                         AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0)
 393                         AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
 394                         AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0)
 395                         AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
 396                         AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
 397                         AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0)
 398                         AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0)
 399                         AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)
 400                         AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0)
 401                         AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0)
 402                         AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0)
 403                         AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0)
 404                         AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0)
 405                 >;
 406         };
 407
 408         cpsw_sleep: cpsw_sleep {
 409                 pinctrl-single,pins = <
 410                         /* Slave 1 reset value */
 411                         AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
 412                         AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
 413                         AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
 414                         AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 415                         AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
 416                         AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
 417                         AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
 418                         AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 419                         AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
 420                         AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 421                         AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
 422                         AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 423                         AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 424                 >;
 425         };
 426
 427         davinci_mdio_default: davinci_mdio_default {
 428                 pinctrl-single,pins = <
 429                         /* mdio_data.mdio_data */
 430                         AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
 431                         /* mdio_clk.mdio_clk */
 432                         AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
 433                 >;
 434         };
 435
 436         davinci_mdio_sleep: davinci_mdio_sleep {
 437                 pinctrl-single,pins = <
 438                         /* MDIO reset value */
 439                         AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
 440                         AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 441                 >;
 442         };
 443
 444         ehrpwm1_pins: pinmux_ehrpwm1 {
 445                 pinctrl-single,pins = <
 446                         AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */
 447                 >;
 448         };
 449
 450         emmc_pins: pinmux_emmc_pins {
 451                 pinctrl-single,pins = <
 452                         AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2)
 453                         AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)
 454                         AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)
 455                         AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)
 456                         AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)
 457                         AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)
 458                         AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)
 459                         AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)
 460                         AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)
 461                         AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)
 462                 >;
 463         };
 464
 465         i2c0_pins: pinmux_i2c0_pins {
 466                 pinctrl-single,pins = <
 467                         AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)
 468                         AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)
 469                 >;
 470         };
 471
 472         mmc1_pins: pinmux_mmc1_pins {
 473                 pinctrl-single,pins = <
 474                         AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5)
 475                 >;
 476         };
 477
 478         mmc3_pins: pinmux_mmc3_pins {
 479                 pinctrl-single,pins = <
 480                         AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3)
 481                         AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3)
 482                         AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3)
 483                         AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3)
 484                         AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3)
 485                         AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3)
 486                 >;
 487         };
 488
 489         uart0_pins: pinmux_uart0_pins {
 490                 pinctrl-single,pins = <
 491                         AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0)
 492                         AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0)
 493                         AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0)
 494                         AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)
 495                 >;
 496         };
 497
 498         uart1_pins: pinmux_uart1 {
 499                 pinctrl-single,pins = <
 500                         AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)
 501                         AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0)
 502                         AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)
 503                         AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)
 504                 >;
 505         };
 506
 507         uart2_pins: pinmux_uart2_pins {
 508                 pinctrl-single,pins = <
 509                         AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)
 510                         AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)
 511                 >;
 512         };
 513
 514         uart4_pins: pinmux_uart4_pins {
 515                 pinctrl-single,pins = <
 516                         AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)
 517                         AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6)
 518                 >;
 519         };
 520
 521         user_leds_s0: user_leds_s0 {
 522                 pinctrl-single,pins = <
 523                         AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7)
 524                         AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7)
 525                         AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)
 526                         AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7)
 527                         AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)
 528                         AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7)
 529                         AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
 530                         AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 531                         AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)
 532                         AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)
 533                         AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7)
 534                         AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7)
 535                         AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)
 536                         AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)
 537                         AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7)
 538                         AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7)
 539                         AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7)
 540                         AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7)
 541                         AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7)
 542                         AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)
 543                         AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7)
 544                         AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7)
 545                         AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7)
 546                         AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7)
 547                         AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7)
 548                         AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7)
 549                         AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7)
 550                         AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7)
 551                         AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7)
 552                         AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7)
 553                         AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)
 554                         AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7)
 555                         AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7)
 556                         AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7)
 557                         AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7)
 558                         AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7)
 559                         AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7)
 560                         AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7)
 561                         AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7)
 562                         AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7)
 563                         AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7)
 564                         AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 565                         AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7)
 566                         AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)
 567                         AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7)
 568                         AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 569                         AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 570                         AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
 571                         AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7)
 572                 >;
 573         };
 574 };