arch/arm/boot/dts/am335x-icev2.dts

   1 /*
   2  * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /*
  10  * AM335x ICE V2 board
  11  * http://www.ti.com/tool/tmdsice3359
  12  */
  13
  14 /dts-v1/;
  15
  16 #include "am33xx.dtsi"
  17
  18 / {
  19         model = "TI AM3359 ICE-V2";
  20         compatible = "ti,am3359-icev2", "ti,am33xx";
  21
  22         memory {
  23                 device_type = "memory";
  24                 reg = <0x80000000 0x10000000>; /* 256 MB */
  25         };
  26
  27         vbat: fixedregulator@0 {
  28                 compatible = "regulator-fixed";
  29                 regulator-name = "vbat";
  30                 regulator-min-microvolt = <5000000>;
  31                 regulator-max-microvolt = <5000000>;
  32                 regulator-boot-on;
  33         };
  34
  35         vtt_fixed: fixedregulator@1 {
  36                 compatible = "regulator-fixed";
  37                 regulator-name = "vtt";
  38                 regulator-min-microvolt = <1500000>;
  39                 regulator-max-microvolt = <1500000>;
  40                 gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
  41                 regulator-always-on;
  42                 regulator-boot-on;
  43                 enable-active-high;
  44         };
  45
  46         leds@0 {
  47                 compatible = "gpio-leds";
  48
  49                 led@0 {
  50                         label = "out0";
  51                         gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
  52                         default-state = "off";
  53                 };
  54
  55                 led@1 {
  56                         label = "out1";
  57                         gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
  58                         default-state = "off";
  59                 };
  60
  61                 led@2 {
  62                         label = "out2";
  63                         gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
  64                         default-state = "off";
  65                 };
  66
  67                 led@3 {
  68                         label = "out3";
  69                         gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
  70                         default-state = "off";
  71                 };
  72
  73                 led@4 {
  74                         label = "out4";
  75                         gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
  76                         default-state = "off";
  77                 };
  78
  79                 led@5 {
  80                         label = "out5";
  81                         gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
  82                         default-state = "off";
  83                 };
  84
  85                 led@6 {
  86                         label = "out6";
  87                         gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
  88                         default-state = "off";
  89                 };
  90
  91                 led@7 {
  92                         label = "out7";
  93                         gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
  94                         default-state = "off";
  95                 };
  96         };
  97
  98         /* Tricolor status LEDs */
  99         leds@1 {
 100                 compatible = "gpio-leds";
 101                 pinctrl-names = "default";
 102                 pinctrl-0 = <&user_leds>;
 103
 104                 led@0 {
 105                         label = "status0:red:cpu0";
 106                         gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 107                         default-state = "off";
 108                         linux,default-trigger = "cpu0";
 109                 };
 110
 111                 led@1 {
 112                         label = "status0:green:usr";
 113                         gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 114                         default-state = "off";
 115                 };
 116
 117                 led@2 {
 118                         label = "status0:yellow:usr";
 119                         gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
 120                         default-state = "off";
 121                 };
 122
 123                 led@3 {
 124                         label = "status1:red:mmc0";
 125                         gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 126                         default-state = "off";
 127                         linux,default-trigger = "mmc0";
 128                 };
 129
 130                 led@4 {
 131                         label = "status1:green:usr";
 132                         gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
 133                         default-state = "off";
 134                 };
 135
 136                 led@5 {
 137                         label = "status1:yellow:usr";
 138                         gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
 139                         default-state = "off";
 140                 };
 141         };
 142 };
 143
 144 &am33xx_pinmux {
 145         user_leds: user_leds {
 146                 pinctrl-single,pins = <
 147                         AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */
 148                         AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */
 149                         AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */
 150                         AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */
 151                         AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */
 152                         AM33XX_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */
 153                 >;
 154         };
 155
 156         mmc0_pins_default: mmc0_pins_default {
 157                 pinctrl-single,pins = <
 158                         AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
 159                         AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
 160                         AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
 161                         AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
 162                         AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
 163                         AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
 164                         AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */
 165                 >;
 166         };
 167
 168         i2c0_pins_default: i2c0_pins_default {
 169                 pinctrl-single,pins = <
 170                         AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
 171                         AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
 172                 >;
 173         };
 174
 175         spi0_pins_default: spi0_pins_default {
 176                 pinctrl-single,pins = <
 177                         AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */
 178                         AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
 179                         AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
 180                         AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
 181                 >;
 182         };
 183
 184         uart3_pins_default: uart3_pins_default {
 185                 pinctrl-single,pins = <
 186                         AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
 187                         AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
 188                 >;
 189         };
 190 };
 191
 192 &i2c0 {
 193         pinctrl-names = "default";
 194         pinctrl-0 = <&i2c0_pins_default>;
 195
 196         status = "okay";
 197         clock-frequency = <400000>;
 198
 199         tps: power-controller@2d {
 200                 reg = <0x2d>;
 201         };
 202
 203         tpic2810: gpio@60 {
 204                 compatible = "ti,tpic2810";
 205                 reg = <0x60>;
 206                 gpio-controller;
 207                 #gpio-cells = <2>;
 208         };
 209
 210         pca9536: gpio@41 {
 211                 compatible = "ti,pca9536";
 212                 reg = <0x41>;
 213                 gpio-controller;
 214                 #gpio-cells = <2>;
 215         };
 216 };
 217
 218 #include "tps65910.dtsi"
 219
 220 &tps {
 221         vcc1-supply = <&vbat>;
 222         vcc2-supply = <&vbat>;
 223         vcc3-supply = <&vbat>;
 224         vcc4-supply = <&vbat>;
 225         vcc5-supply = <&vbat>;
 226         vcc6-supply = <&vbat>;
 227         vcc7-supply = <&vbat>;
 228         vccio-supply = <&vbat>;
 229
 230         regulators {
 231                 vrtc_reg: regulator@0 {
 232                         regulator-always-on;
 233                 };
 234
 235                 vio_reg: regulator@1 {
 236                         regulator-always-on;
 237                 };
 238
 239                 vdd1_reg: regulator@2 {
 240                         regulator-name = "vdd_mpu";
 241                         regulator-min-microvolt = <912500>;
 242                         regulator-max-microvolt = <1326000>;
 243                         regulator-boot-on;
 244                         regulator-always-on;
 245                 };
 246
 247                 vdd2_reg: regulator@3 {
 248                         regulator-name = "vdd_core";
 249                         regulator-min-microvolt = <912500>;
 250                         regulator-max-microvolt = <1144000>;
 251                         regulator-boot-on;
 252                         regulator-always-on;
 253                 };
 254
 255                 vdd3_reg: regulator@4 {
 256                         regulator-always-on;
 257                 };
 258
 259                 vdig1_reg: regulator@5 {
 260                         regulator-always-on;
 261                 };
 262
 263                 vdig2_reg: regulator@6 {
 264                         regulator-always-on;
 265                 };
 266
 267                 vpll_reg: regulator@7 {
 268                         regulator-always-on;
 269                 };
 270
 271                 vdac_reg: regulator@8 {
 272                         regulator-always-on;
 273                 };
 274
 275                 vaux1_reg: regulator@9 {
 276                         regulator-always-on;
 277                 };
 278
 279                 vaux2_reg: regulator@10 {
 280                         regulator-always-on;
 281                 };
 282
 283                 vaux33_reg: regulator@11 {
 284                         regulator-always-on;
 285                 };
 286
 287                 vmmc_reg: regulator@12 {
 288                         regulator-min-microvolt = <1800000>;
 289                         regulator-max-microvolt = <3300000>;
 290                         regulator-always-on;
 291                 };
 292         };
 293 };
 294
 295 &mmc1 {
 296         status = "okay";
 297         vmmc-supply = <&vmmc_reg>;
 298         bus-width = <4>;
 299         pinctrl-names = "default";
 300         pinctrl-0 = <&mmc0_pins_default>;
 301 };
 302
 303 &gpio0 {
 304         /* Do not idle the GPIO used for holding the VTT regulator */
 305         ti,no-reset-on-init;
 306         ti,no-idle-on-init;
 307 };
 308
 309 &uart3 {
 310         pinctrl-names = "default";
 311         pinctrl-0 = <&uart3_pins_default>;
 312         status = "okay";
 313 };