arch/arm/boot/dts/am335x-bone-common.dtsi

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 / {
  10         cpus {
  11                 cpu@0 {
  12                         cpu0-supply = <&dcdc2_reg>;
  13                 };
  14         };
  15
  16         memory {
  17                 device_type = "memory";
  18                 reg = <0x80000000 0x10000000>; /* 256 MB */
  19         };
  20
  21         leds {
  22                 pinctrl-names = "default";
  23                 pinctrl-0 = <&user_leds_s0>;
  24
  25                 compatible = "gpio-leds";
  26
  27                 led@2 {
  28                         label = "beaglebone:green:heartbeat";
  29                         gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
  30                         linux,default-trigger = "heartbeat";
  31                         default-state = "off";
  32                 };
  33
  34                 led@3 {
  35                         label = "beaglebone:green:mmc0";
  36                         gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
  37                         linux,default-trigger = "mmc0";
  38                         default-state = "off";
  39                 };
  40
  41                 led@4 {
  42                         label = "beaglebone:green:usr2";
  43                         gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
  44                         linux,default-trigger = "cpu0";
  45                         default-state = "off";
  46                 };
  47
  48                 led@5 {
  49                         label = "beaglebone:green:usr3";
  50                         gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
  51                         linux,default-trigger = "mmc1";
  52                         default-state = "off";
  53                 };
  54         };
  55
  56         vmmcsd_fixed: fixedregulator@0 {
  57                 compatible = "regulator-fixed";
  58                 regulator-name = "vmmcsd_fixed";
  59                 regulator-min-microvolt = <3300000>;
  60                 regulator-max-microvolt = <3300000>;
  61         };
  62 };
  63
  64 &am33xx_pinmux {
  65         pinctrl-names = "default";
  66         pinctrl-0 = <&clkout2_pin>;
  67
  68         user_leds_s0: user_leds_s0 {
  69                 pinctrl-single,pins = <
  70                         0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a5.gpio1_21 */
  71                         0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)    /* gpmc_a6.gpio1_22 */
  72                         0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a7.gpio1_23 */
  73                         0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)    /* gpmc_a8.gpio1_24 */
  74                 >;
  75         };
  76
  77         i2c0_pins: pinmux_i2c0_pins {
  78                 pinctrl-single,pins = <
  79                         0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_sda.i2c0_sda */
  80                         0x18c (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_scl.i2c0_scl */
  81                 >;
  82         };
  83
  84         uart0_pins: pinmux_uart0_pins {
  85                 pinctrl-single,pins = <
  86                         0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
  87                         0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
  88                 >;
  89         };
  90
  91         clkout2_pin: pinmux_clkout2_pin {
  92                 pinctrl-single,pins = <
  93                         0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
  94                 >;
  95         };
  96
  97         cpsw_default: cpsw_default {
  98                 pinctrl-single,pins = <
  99                         /* Slave 1 */
 100                         0x110 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxerr.mii1_rxerr */
 101                         0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
 102                         0x118 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxdv.mii1_rxdv */
 103                         0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
 104                         0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
 105                         0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
 106                         0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
 107                         0x12c (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_txclk.mii1_txclk */
 108                         0x130 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxclk.mii1_rxclk */
 109                         0x134 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd3.mii1_rxd3 */
 110                         0x138 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd2.mii1_rxd2 */
 111                         0x13c (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd1.mii1_rxd1 */
 112                         0x140 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd0.mii1_rxd0 */
 113                 >;
 114         };
 115
 116         cpsw_sleep: cpsw_sleep {
 117                 pinctrl-single,pins = <
 118                         /* Slave 1 reset value */
 119                         0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 120                         0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 121                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 122                         0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 123                         0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 124                         0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 125                         0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 126                         0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 127                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 128                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 129                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 130                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 131                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 132                 >;
 133         };
 134
 135         davinci_mdio_default: davinci_mdio_default {
 136                 pinctrl-single,pins = <
 137                         /* MDIO */
 138                         0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* mdio_data.mdio_data */
 139                         0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   /* mdio_clk.mdio_clk */
 140                 >;
 141         };
 142
 143         davinci_mdio_sleep: davinci_mdio_sleep {
 144                 pinctrl-single,pins = <
 145                         /* MDIO reset value */
 146                         0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 147                         0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 148                 >;
 149         };
 150
 151         mmc1_pins: pinmux_mmc1_pins {
 152                 pinctrl-single,pins = <
 153                         0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
 154                 >;
 155         };
 156
 157         emmc_pins: pinmux_emmc_pins {
 158                 pinctrl-single,pins = <
 159                         0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
 160                         0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
 161                         0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
 162                         0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
 163                         0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
 164                         0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
 165                         0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
 166                         0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
 167                         0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
 168                         0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
 169                 >;
 170         };
 171 };
 172
 173 &uart0 {
 174         pinctrl-names = "default";
 175         pinctrl-0 = <&uart0_pins>;
 176
 177         status = "okay";
 178 };
 179
 180 &usb {
 181         status = "okay";
 182 };
 183
 184 &usb_ctrl_mod {
 185         status = "okay";
 186 };
 187
 188 &usb0_phy {
 189         status = "okay";
 190 };
 191
 192 &usb1_phy {
 193         status = "okay";
 194 };
 195
 196 &usb0 {
 197         status = "okay";
 198         dr_mode = "peripheral";
 199 };
 200
 201 &usb1 {
 202         status = "okay";
 203         dr_mode = "host";
 204 };
 205
 206 &cppi41dma  {
 207         status = "okay";
 208 };
 209
 210 &i2c0 {
 211         pinctrl-names = "default";
 212         pinctrl-0 = <&i2c0_pins>;
 213
 214         status = "okay";
 215         clock-frequency = <400000>;
 216
 217         tps: tps@24 {
 218                 reg = <0x24>;
 219         };
 220
 221 };
 222
 223 /include/ "tps65217.dtsi"
 224
 225 &tps {
 226         regulators {
 227                 dcdc1_reg: regulator@0 {
 228                         regulator-name = "vdds_dpr";
 229                         regulator-always-on;
 230                 };
 231
 232                 dcdc2_reg: regulator@1 {
 233                         /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 234                         regulator-name = "vdd_mpu";
 235                         regulator-min-microvolt = <925000>;
 236                         regulator-max-microvolt = <1325000>;
 237                         regulator-boot-on;
 238                         regulator-always-on;
 239                 };
 240
 241                 dcdc3_reg: regulator@2 {
 242                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 243                         regulator-name = "vdd_core";
 244                         regulator-min-microvolt = <925000>;
 245                         regulator-max-microvolt = <1150000>;
 246                         regulator-boot-on;
 247                         regulator-always-on;
 248                 };
 249
 250                 ldo1_reg: regulator@3 {
 251                         regulator-name = "vio,vrtc,vdds";
 252                         regulator-always-on;
 253                 };
 254
 255                 ldo2_reg: regulator@4 {
 256                         regulator-name = "vdd_3v3aux";
 257                         regulator-always-on;
 258                 };
 259
 260                 ldo3_reg: regulator@5 {
 261                         regulator-name = "vdd_1v8";
 262                         regulator-always-on;
 263                 };
 264
 265                 ldo4_reg: regulator@6 {
 266                         regulator-name = "vdd_3v3a";
 267                         regulator-always-on;
 268                 };
 269         };
 270 };
 271
 272 &cpsw_emac0 {
 273         phy_id = <&davinci_mdio>, <0>;
 274         phy-mode = "mii";
 275 };
 276
 277 &cpsw_emac1 {
 278         phy_id = <&davinci_mdio>, <1>;
 279         phy-mode = "mii";
 280 };
 281
 282 &mac {
 283         pinctrl-names = "default", "sleep";
 284         pinctrl-0 = <&cpsw_default>;
 285         pinctrl-1 = <&cpsw_sleep>;
 286         status = "okay";
 287 };
 288
 289 &davinci_mdio {
 290         pinctrl-names = "default", "sleep";
 291         pinctrl-0 = <&davinci_mdio_default>;
 292         pinctrl-1 = <&davinci_mdio_sleep>;
 293         status = "okay";
 294 };
 295
 296 &mmc1 {
 297         status = "okay";
 298         bus-width = <0x4>;
 299         pinctrl-names = "default";
 300         pinctrl-0 = <&mmc1_pins>;
 301         cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 302         cd-inverted;
 303 };
 304
 305 &aes {
 306         status = "okay";
 307 };
 308
 309 &sham {
 310         status = "okay";
 311 };