Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
[sfrench/cifs-2.6.git] / arch / arc / mm / init.c
1 /*
2  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  */
8
9 #include <linux/kernel.h>
10 #include <linux/mm.h>
11 #include <linux/memblock.h>
12 #ifdef CONFIG_BLK_DEV_INITRD
13 #include <linux/initrd.h>
14 #endif
15 #include <linux/of_fdt.h>
16 #include <linux/swap.h>
17 #include <linux/module.h>
18 #include <linux/highmem.h>
19 #include <asm/page.h>
20 #include <asm/pgalloc.h>
21 #include <asm/sections.h>
22 #include <asm/arcregs.h>
23
24 pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
25 char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
26 EXPORT_SYMBOL(empty_zero_page);
27
28 static const unsigned long low_mem_start = CONFIG_LINUX_RAM_BASE;
29 static unsigned long low_mem_sz;
30
31 #ifdef CONFIG_HIGHMEM
32 static unsigned long min_high_pfn, max_high_pfn;
33 static u64 high_mem_start;
34 static u64 high_mem_sz;
35 #endif
36
37 #ifdef CONFIG_DISCONTIGMEM
38 struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
39 EXPORT_SYMBOL(node_data);
40 #endif
41
42 long __init arc_get_mem_sz(void)
43 {
44         return low_mem_sz;
45 }
46
47 /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
48 static int __init setup_mem_sz(char *str)
49 {
50         low_mem_sz = memparse(str, NULL) & PAGE_MASK;
51
52         /* early console might not be setup yet - it will show up later */
53         pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
54
55         return 0;
56 }
57 early_param("mem", setup_mem_sz);
58
59 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
60 {
61         int in_use = 0;
62
63         if (!low_mem_sz) {
64                 if (base != low_mem_start)
65                         panic("CONFIG_LINUX_RAM_BASE != DT memory { }");
66
67                 low_mem_sz = size;
68                 in_use = 1;
69         } else {
70 #ifdef CONFIG_HIGHMEM
71                 high_mem_start = base;
72                 high_mem_sz = size;
73                 in_use = 1;
74 #endif
75         }
76
77         pr_info("Memory @ %llx [%lldM] %s\n",
78                 base, TO_MB(size), !in_use ? "Not used":"");
79 }
80
81 #ifdef CONFIG_BLK_DEV_INITRD
82 static int __init early_initrd(char *p)
83 {
84         unsigned long start, size;
85         char *endp;
86
87         start = memparse(p, &endp);
88         if (*endp == ',') {
89                 size = memparse(endp + 1, NULL);
90
91                 initrd_start = (unsigned long)__va(start);
92                 initrd_end = (unsigned long)__va(start + size);
93         }
94         return 0;
95 }
96 early_param("initrd", early_initrd);
97 #endif
98
99 /*
100  * First memory setup routine called from setup_arch()
101  * 1. setup swapper's mm @init_mm
102  * 2. Count the pages we have and setup bootmem allocator
103  * 3. zone setup
104  */
105 void __init setup_arch_memory(void)
106 {
107         unsigned long zones_size[MAX_NR_ZONES];
108         unsigned long zones_holes[MAX_NR_ZONES];
109
110         init_mm.start_code = (unsigned long)_text;
111         init_mm.end_code = (unsigned long)_etext;
112         init_mm.end_data = (unsigned long)_edata;
113         init_mm.brk = (unsigned long)_end;
114
115         /* first page of system - kernel .vector starts here */
116         min_low_pfn = ARCH_PFN_OFFSET;
117
118         /* Last usable page of low mem */
119         max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
120
121 #ifdef CONFIG_FLATMEM
122         /* pfn_valid() uses this */
123         max_mapnr = max_low_pfn - min_low_pfn;
124 #endif
125
126         /*------------- bootmem allocator setup -----------------------*/
127
128         /*
129          * seed the bootmem allocator after any DT memory node parsing or
130          * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
131          *
132          * Only low mem is added, otherwise we have crashes when allocating
133          * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
134          * avail memory, ending in highmem with a > 32-bit address. However
135          * it then tries to memset it with a truncaed 32-bit handle, causing
136          * the crash
137          */
138
139         memblock_add_node(low_mem_start, low_mem_sz, 0);
140         memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
141
142 #ifdef CONFIG_BLK_DEV_INITRD
143         if (initrd_start)
144                 memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
145 #endif
146
147         early_init_fdt_reserve_self();
148         early_init_fdt_scan_reserved_mem();
149
150         memblock_dump_all();
151
152         /*----------------- node/zones setup --------------------------*/
153         memset(zones_size, 0, sizeof(zones_size));
154         memset(zones_holes, 0, sizeof(zones_holes));
155
156         zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
157         zones_holes[ZONE_NORMAL] = 0;
158
159         /*
160          * We can't use the helper free_area_init(zones[]) because it uses
161          * PAGE_OFFSET to compute the @min_low_pfn which would be wrong
162          * when our kernel doesn't start at PAGE_OFFSET, i.e.
163          * PAGE_OFFSET != CONFIG_LINUX_RAM_BASE
164          */
165         free_area_init_node(0,                  /* node-id */
166                             zones_size,         /* num pages per zone */
167                             min_low_pfn,        /* first pfn of node */
168                             zones_holes);       /* holes */
169
170 #ifdef CONFIG_HIGHMEM
171         /*
172          * Populate a new node with highmem
173          *
174          * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
175          * than addresses in normal ala low memory (0x8000_0000 based).
176          * Even with PAE, the huge peripheral space hole would waste a lot of
177          * mem with single mem_map[]. This warrants a mem_map per region design.
178          * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
179          *
180          * DISCONTIGMEM in turns requires multiple nodes. node 0 above is
181          * populated with normal memory zone while node 1 only has highmem
182          */
183         node_set_online(1);
184
185         min_high_pfn = PFN_DOWN(high_mem_start);
186         max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
187
188         zones_size[ZONE_NORMAL] = 0;
189         zones_holes[ZONE_NORMAL] = 0;
190
191         zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn;
192         zones_holes[ZONE_HIGHMEM] = 0;
193
194         free_area_init_node(1,                  /* node-id */
195                             zones_size,         /* num pages per zone */
196                             min_high_pfn,       /* first pfn of node */
197                             zones_holes);       /* holes */
198
199         high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
200         kmap_init();
201 #endif
202 }
203
204 /*
205  * mem_init - initializes memory
206  *
207  * Frees up bootmem
208  * Calculates and displays memory available/used
209  */
210 void __init mem_init(void)
211 {
212 #ifdef CONFIG_HIGHMEM
213         unsigned long tmp;
214
215         reset_all_zones_managed_pages();
216         for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
217                 free_highmem_page(pfn_to_page(tmp));
218 #endif
219
220         memblock_free_all();
221         mem_init_print_info(NULL);
222 }
223
224 /*
225  * free_initmem: Free all the __init memory.
226  */
227 void __ref free_initmem(void)
228 {
229         free_initmem_default(-1);
230 }
231
232 #ifdef CONFIG_BLK_DEV_INITRD
233 void __init free_initrd_mem(unsigned long start, unsigned long end)
234 {
235         free_reserved_area((void *)start, (void *)end, -1, "initrd");
236 }
237 #endif