Merge branch 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason...
[sfrench/cifs-2.6.git] / arch / arc / mm / init.c
1 /*
2  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  */
8
9 #include <linux/kernel.h>
10 #include <linux/mm.h>
11 #include <linux/bootmem.h>
12 #include <linux/memblock.h>
13 #ifdef CONFIG_BLK_DEV_INITRD
14 #include <linux/initrd.h>
15 #endif
16 #include <linux/of_fdt.h>
17 #include <linux/swap.h>
18 #include <linux/module.h>
19 #include <linux/highmem.h>
20 #include <asm/page.h>
21 #include <asm/pgalloc.h>
22 #include <asm/sections.h>
23 #include <asm/arcregs.h>
24
25 pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
26 char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
27 EXPORT_SYMBOL(empty_zero_page);
28
29 static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE;
30 static unsigned long low_mem_sz;
31
32 #ifdef CONFIG_HIGHMEM
33 static unsigned long min_high_pfn, max_high_pfn;
34 static u64 high_mem_start;
35 static u64 high_mem_sz;
36 #endif
37
38 #ifdef CONFIG_DISCONTIGMEM
39 struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
40 EXPORT_SYMBOL(node_data);
41 #endif
42
43 /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
44 static int __init setup_mem_sz(char *str)
45 {
46         low_mem_sz = memparse(str, NULL) & PAGE_MASK;
47
48         /* early console might not be setup yet - it will show up later */
49         pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
50
51         return 0;
52 }
53 early_param("mem", setup_mem_sz);
54
55 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
56 {
57         int in_use = 0;
58
59         if (!low_mem_sz) {
60                 if (base != low_mem_start)
61                         panic("CONFIG_LINUX_LINK_BASE != DT memory { }");
62
63                 low_mem_sz = size;
64                 in_use = 1;
65         } else {
66 #ifdef CONFIG_HIGHMEM
67                 high_mem_start = base;
68                 high_mem_sz = size;
69                 in_use = 1;
70 #endif
71         }
72
73         pr_info("Memory @ %llx [%lldM] %s\n",
74                 base, TO_MB(size), !in_use ? "Not used":"");
75 }
76
77 #ifdef CONFIG_BLK_DEV_INITRD
78 static int __init early_initrd(char *p)
79 {
80         unsigned long start, size;
81         char *endp;
82
83         start = memparse(p, &endp);
84         if (*endp == ',') {
85                 size = memparse(endp + 1, NULL);
86
87                 initrd_start = (unsigned long)__va(start);
88                 initrd_end = (unsigned long)__va(start + size);
89         }
90         return 0;
91 }
92 early_param("initrd", early_initrd);
93 #endif
94
95 /*
96  * First memory setup routine called from setup_arch()
97  * 1. setup swapper's mm @init_mm
98  * 2. Count the pages we have and setup bootmem allocator
99  * 3. zone setup
100  */
101 void __init setup_arch_memory(void)
102 {
103         unsigned long zones_size[MAX_NR_ZONES];
104         unsigned long zones_holes[MAX_NR_ZONES];
105
106         init_mm.start_code = (unsigned long)_text;
107         init_mm.end_code = (unsigned long)_etext;
108         init_mm.end_data = (unsigned long)_edata;
109         init_mm.brk = (unsigned long)_end;
110
111         /* first page of system - kernel .vector starts here */
112         min_low_pfn = ARCH_PFN_OFFSET;
113
114         /* Last usable page of low mem */
115         max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
116
117 #ifdef CONFIG_FLATMEM
118         /* pfn_valid() uses this */
119         max_mapnr = max_low_pfn - min_low_pfn;
120 #endif
121
122         /*------------- bootmem allocator setup -----------------------*/
123
124         /*
125          * seed the bootmem allocator after any DT memory node parsing or
126          * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
127          *
128          * Only low mem is added, otherwise we have crashes when allocating
129          * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
130          * avail memory, ending in highmem with a > 32-bit address. However
131          * it then tries to memset it with a truncaed 32-bit handle, causing
132          * the crash
133          */
134
135         memblock_add_node(low_mem_start, low_mem_sz, 0);
136         memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
137
138 #ifdef CONFIG_BLK_DEV_INITRD
139         if (initrd_start)
140                 memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
141 #endif
142
143         early_init_fdt_reserve_self();
144         early_init_fdt_scan_reserved_mem();
145
146         memblock_dump_all();
147
148         /*----------------- node/zones setup --------------------------*/
149         memset(zones_size, 0, sizeof(zones_size));
150         memset(zones_holes, 0, sizeof(zones_holes));
151
152         zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
153         zones_holes[ZONE_NORMAL] = 0;
154
155         /*
156          * We can't use the helper free_area_init(zones[]) because it uses
157          * PAGE_OFFSET to compute the @min_low_pfn which would be wrong
158          * when our kernel doesn't start at PAGE_OFFSET, i.e.
159          * PAGE_OFFSET != CONFIG_LINUX_LINK_BASE
160          */
161         free_area_init_node(0,                  /* node-id */
162                             zones_size,         /* num pages per zone */
163                             min_low_pfn,        /* first pfn of node */
164                             zones_holes);       /* holes */
165
166 #ifdef CONFIG_HIGHMEM
167         /*
168          * Populate a new node with highmem
169          *
170          * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
171          * than addresses in normal ala low memory (0x8000_0000 based).
172          * Even with PAE, the huge peripheral space hole would waste a lot of
173          * mem with single mem_map[]. This warrants a mem_map per region design.
174          * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
175          *
176          * DISCONTIGMEM in turns requires multiple nodes. node 0 above is
177          * populated with normal memory zone while node 1 only has highmem
178          */
179         node_set_online(1);
180
181         min_high_pfn = PFN_DOWN(high_mem_start);
182         max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
183
184         zones_size[ZONE_NORMAL] = 0;
185         zones_holes[ZONE_NORMAL] = 0;
186
187         zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn;
188         zones_holes[ZONE_HIGHMEM] = 0;
189
190         free_area_init_node(1,                  /* node-id */
191                             zones_size,         /* num pages per zone */
192                             min_high_pfn,       /* first pfn of node */
193                             zones_holes);       /* holes */
194
195         high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
196         kmap_init();
197 #endif
198 }
199
200 /*
201  * mem_init - initializes memory
202  *
203  * Frees up bootmem
204  * Calculates and displays memory available/used
205  */
206 void __init mem_init(void)
207 {
208 #ifdef CONFIG_HIGHMEM
209         unsigned long tmp;
210
211         reset_all_zones_managed_pages();
212         for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
213                 free_highmem_page(pfn_to_page(tmp));
214 #endif
215
216         free_all_bootmem();
217         mem_init_print_info(NULL);
218 }
219
220 /*
221  * free_initmem: Free all the __init memory.
222  */
223 void __ref free_initmem(void)
224 {
225         free_initmem_default(-1);
226 }
227
228 #ifdef CONFIG_BLK_DEV_INITRD
229 void __init free_initrd_mem(unsigned long start, unsigned long end)
230 {
231         free_reserved_area((void *)start, (void *)end, -1, "initrd");
232 }
233 #endif