arch/arc/boot/dts/axc003_idu.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com)
   4  */
   5
   6 /*
   7  * Device tree for AXC003 CPU card: HS38x2 (Dual Core) with IDU intc
   8  */
   9
  10 /include/ "skeleton_hs_idu.dtsi"
  11
  12 / {
  13         compatible = "snps,arc";
  14         #address-cells = <2>;
  15         #size-cells = <2>;
  16
  17         cpu_card {
  18                 compatible = "simple-bus";
  19                 #address-cells = <1>;
  20                 #size-cells = <1>;
  21
  22                 ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
  23
  24                 input_clk: input-clk {
  25                         #clock-cells = <0>;
  26                         compatible = "fixed-clock";
  27                         clock-frequency = <33333333>;
  28                 };
  29
  30                 core_clk: core-clk@80 {
  31                         compatible = "snps,axs10x-arc-pll-clock";
  32                         reg = <0x80 0x10>, <0x100 0x10>;
  33                         #clock-cells = <0>;
  34                         clocks = <&input_clk>;
  35
  36                         /*
  37                          * Set initial core pll output frequency to 100MHz.
  38                          * It will be applied at the core pll driver probing
  39                          * on early boot.
  40                          */
  41                         assigned-clocks = <&core_clk>;
  42                         assigned-clock-rates = <100000000>;
  43                 };
  44
  45                 core_intc: archs-intc@cpu {
  46                         compatible = "snps,archs-intc";
  47                         interrupt-controller;
  48                         #interrupt-cells = <1>;
  49                 };
  50
  51                 idu_intc: idu-interrupt-controller {
  52                         compatible = "snps,archs-idu-intc";
  53                         interrupt-controller;
  54                         interrupt-parent = <&core_intc>;
  55                         #interrupt-cells = <1>;
  56                 };
  57
  58                 /*
  59                  * this GPIO block ORs all interrupts on CPU card (creg,..)
  60                  * to uplink only 1 IRQ to ARC core intc
  61                  */
  62                 dw-apb-gpio@2000 {
  63                         compatible = "snps,dw-apb-gpio";
  64                         reg = < 0x2000 0x80 >;
  65                         #address-cells = <1>;
  66                         #size-cells = <0>;
  67
  68                         ictl_intc: gpio-controller@0 {
  69                                 compatible = "snps,dw-apb-gpio-port";
  70                                 gpio-controller;
  71                                 #gpio-cells = <2>;
  72                                 snps,nr-gpios = <30>;
  73                                 reg = <0>;
  74                                 interrupt-controller;
  75                                 #interrupt-cells = <2>;
  76                                 interrupt-parent = <&idu_intc>;
  77                                 interrupts = <1>;
  78                         };
  79                 };
  80
  81                 debug_uart: dw-apb-uart@5000 {
  82                         compatible = "snps,dw-apb-uart";
  83                         reg = <0x5000 0x100>;
  84                         clock-frequency = <33333000>;
  85                         interrupt-parent = <&ictl_intc>;
  86                         interrupts = <2 4>;
  87                         baud = <115200>;
  88                         reg-shift = <2>;
  89                         reg-io-width = <4>;
  90                 };
  91
  92                 arcpct0: pct {
  93                         compatible = "snps,archs-pct";
  94                         #interrupt-cells = <1>;
  95                         interrupt-parent = <&core_intc>;
  96                         interrupts = <20>;
  97                 };
  98         };
  99
 100         /*
 101          * Mark DMA peripherals connected via IOC port as dma-coherent. We do
 102          * it via overlay because peripherals defined in axs10x_mb.dtsi are
 103          * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
 104          * only AXS103 board has HW-coherent DMA peripherals)
 105          * We don't need to mark pgu@17000 as dma-coherent because it uses
 106          * external DMA buffer located outside of IOC aperture.
 107          */
 108         axs10x_mb {
 109                 ethernet@18000 {
 110                         dma-coherent;
 111                 };
 112
 113                 ehci@40000 {
 114                         dma-coherent;
 115                 };
 116
 117                 ohci@60000 {
 118                         dma-coherent;
 119                 };
 120
 121                 mmc@15000 {
 122                         dma-coherent;
 123                 };
 124         };
 125
 126         /*
 127          * This INTC is actually connected to DW APB GPIO
 128          * which acts as a wire between MB INTC and CPU INTC.
 129          * GPIO INTC is configured in platform init code
 130          * and here we mimic direct connection from MB INTC to
 131          * CPU INTC, thus we set "interrupts = <0 1>" instead of
 132          * "interrupts = <12>"
 133          *
 134          * This intc actually resides on MB, but we move it here to
 135          * avoid duplicating the MB dtsi file given that IRQ from
 136          * this intc to cpu intc are different for axs101 and axs103
 137          */
 138         mb_intc: dw-apb-ictl@e0012000 {
 139                 #interrupt-cells = <1>;
 140                 compatible = "snps,dw-apb-ictl";
 141                 reg = < 0x0 0xe0012000 0x0 0x200 >;
 142                 interrupt-controller;
 143                 interrupt-parent = <&idu_intc>;
 144                 interrupts = <0>;
 145         };
 146
 147         memory {
 148                 device_type = "memory";
 149                 /* CONFIG_LINUX_RAM_BASE needs to match low mem start */
 150                 reg = <0x0 0x80000000 0x0 0x20000000    /* 512 MiB low mem */
 151                        0x1 0xc0000000 0x0 0x40000000>;  /* 1 GiB highmem */
 152         };
 153
 154         reserved-memory {
 155                 #address-cells = <2>;
 156                 #size-cells = <2>;
 157                 ranges;
 158                 /*
 159                  * Move frame buffer out of IOC aperture (0x8z-0xaz).
 160                  */
 161                 frame_buffer: frame_buffer@be000000 {
 162                         compatible = "shared-dma-pool";
 163                         reg = <0x0 0xbe000000 0x0 0x2000000>;
 164                         no-map;
 165                 };
 166         };
 167 };