arch/arc/boot/dts/axc003.dtsi

   1 /*
   2  * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /*
  10  * Device tree for AXC003 CPU card: HS38x UP configuration
  11  */
  12
  13 /include/ "skeleton_hs.dtsi"
  14
  15 / {
  16         compatible = "snps,arc";
  17         #address-cells = <2>;
  18         #size-cells = <2>;
  19
  20         cpu_card {
  21                 compatible = "simple-bus";
  22                 #address-cells = <1>;
  23                 #size-cells = <1>;
  24
  25                 ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
  26
  27                 input_clk: input-clk {
  28                         #clock-cells = <0>;
  29                         compatible = "fixed-clock";
  30                         clock-frequency = <33333333>;
  31                 };
  32
  33                 core_clk: core-clk@80 {
  34                         compatible = "snps,axs10x-arc-pll-clock";
  35                         reg = <0x80 0x10>, <0x100 0x10>;
  36                         #clock-cells = <0>;
  37                         clocks = <&input_clk>;
  38                 };
  39
  40                 core_intc: archs-intc@cpu {
  41                         compatible = "snps,archs-intc";
  42                         interrupt-controller;
  43                         #interrupt-cells = <1>;
  44                 };
  45
  46                 /*
  47                  * this GPIO block ORs all interrupts on CPU card (creg,..)
  48                  * to uplink only 1 IRQ to ARC core intc
  49                  */
  50                 dw-apb-gpio@0x2000 {
  51                         compatible = "snps,dw-apb-gpio";
  52                         reg = < 0x2000 0x80 >;
  53                         #address-cells = <1>;
  54                         #size-cells = <0>;
  55
  56                         ictl_intc: gpio-controller@0 {
  57                                 compatible = "snps,dw-apb-gpio-port";
  58                                 gpio-controller;
  59                                 #gpio-cells = <2>;
  60                                 snps,nr-gpios = <30>;
  61                                 reg = <0>;
  62                                 interrupt-controller;
  63                                 #interrupt-cells = <2>;
  64                                 interrupt-parent = <&core_intc>;
  65                                 interrupts = <25>;
  66                         };
  67                 };
  68
  69                 debug_uart: dw-apb-uart@0x5000 {
  70                         compatible = "snps,dw-apb-uart";
  71                         reg = <0x5000 0x100>;
  72                         clock-frequency = <33333000>;
  73                         interrupt-parent = <&ictl_intc>;
  74                         interrupts = <2 4>;
  75                         baud = <115200>;
  76                         reg-shift = <2>;
  77                         reg-io-width = <4>;
  78                 };
  79
  80                 arcpct0: pct {
  81                         compatible = "snps,archs-pct";
  82                         #interrupt-cells = <1>;
  83                         interrupt-parent = <&core_intc>;
  84                         interrupts = <20>;
  85                 };
  86         };
  87
  88         /*
  89          * The DW APB ICTL intc on MB is connected to CPU intc via a
  90          * DT "invisible" DW APB GPIO block, configured to simply pass thru
  91          * interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c)
  92          *
  93          * So here we mimic a direct connection betwen them, ignoring the
  94          * ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core)
  95          * instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO)
  96          *
  97          * This intc actually resides on MB, but we move it here to
  98          * avoid duplicating the MB dtsi file given that IRQ from
  99          * this intc to cpu intc are different for axs101 and axs103
 100          */
 101         mb_intc: dw-apb-ictl@0xe0012000 {
 102                 #interrupt-cells = <1>;
 103                 compatible = "snps,dw-apb-ictl";
 104                 reg = < 0x0 0xe0012000 0x0 0x200 >;
 105                 interrupt-controller;
 106                 interrupt-parent = <&core_intc>;
 107                 interrupts = < 24 >;
 108         };
 109
 110         memory {
 111                 device_type = "memory";
 112                 /* CONFIG_LINUX_RAM_BASE needs to match low mem start */
 113                 reg = <0x0 0x80000000 0x0 0x20000000    /* 512 MiB low mem */
 114                        0x1 0xc0000000 0x0 0x40000000>;  /* 1 GiB highmem */
 115         };
 116
 117         reserved-memory {
 118                 #address-cells = <2>;
 119                 #size-cells = <2>;
 120                 ranges;
 121                 /*
 122                  * Move frame buffer out of IOC aperture (0x8z-0xAz).
 123                  */
 124                 frame_buffer: frame_buffer@be000000 {
 125                         compatible = "shared-dma-pool";
 126                         reg = <0x0 0xbe000000 0x0 0x2000000>;
 127                         no-map;
 128                 };
 129         };
 130 };