Documentation/scsi/scsi-parameters.txt

   1                           SCSI Kernel Parameters
   2                           ~~~~~~~~~~~~~~~~~~~~~~
   3
   4 See Documentation/admin-guide/kernel-parameters.rst for general information on
   5 specifying module parameters.
   6
   7 This document may not be entirely up to date and comprehensive. The command
   8 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
   9 module. Loadable modules, after being loaded into the running kernel, also
  10 reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
  11 parameters may be changed at runtime by the command
  12 "echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
  13
  14
  15         advansys=       [HW,SCSI]
  16                         See header of drivers/scsi/advansys.c.
  17
  18         aha152x=        [HW,SCSI]
  19                         See Documentation/scsi/aha152x.txt.
  20
  21         aha1542=        [HW,SCSI]
  22                         Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
  23
  24         aic7xxx=        [HW,SCSI]
  25                         See Documentation/scsi/aic7xxx.txt.
  26
  27         aic79xx=        [HW,SCSI]
  28                         See Documentation/scsi/aic79xx.txt.
  29
  30         atascsi=        [HW,SCSI]
  31                         See drivers/scsi/atari_scsi.c.
  32
  33         BusLogic=       [HW,SCSI]
  34                         See drivers/scsi/BusLogic.c, comment before function
  35                         BusLogic_ParseDriverOptions().
  36
  37         gdth=           [HW,SCSI]
  38                         See header of drivers/scsi/gdth.c.
  39
  40         gvp11=          [HW,SCSI]
  41
  42         ips=            [HW,SCSI] Adaptec / IBM ServeRAID controller
  43                         See header of drivers/scsi/ips.c.
  44
  45         mac5380=        [HW,SCSI]
  46                         See drivers/scsi/mac_scsi.c.
  47
  48         scsi_mod.max_luns=
  49                         [SCSI] Maximum number of LUNs to probe.
  50                         Should be between 1 and 2^32-1.
  51
  52         scsi_mod.max_report_luns=
  53                         [SCSI] Maximum number of LUNs received.
  54                         Should be between 1 and 16384.
  55
  56         NCR_D700=       [HW,SCSI]
  57                         See header of drivers/scsi/NCR_D700.c.
  58
  59         ncr5380=        [HW,SCSI]
  60                         See Documentation/scsi/g_NCR5380.txt.
  61
  62         ncr53c400=      [HW,SCSI]
  63                         See Documentation/scsi/g_NCR5380.txt.
  64
  65         ncr53c400a=     [HW,SCSI]
  66                         See Documentation/scsi/g_NCR5380.txt.
  67
  68         ncr53c8xx=      [HW,SCSI]
  69
  70         osst=           [HW,SCSI] SCSI Tape Driver
  71                         Format: <buffer_size>,<write_threshold>
  72                         See also Documentation/scsi/st.txt.
  73
  74         scsi_debug_*=   [SCSI]
  75                         See drivers/scsi/scsi_debug.c.
  76
  77         scsi_mod.default_dev_flags=
  78                         [SCSI] SCSI default device flags
  79                         Format: <integer>
  80
  81         scsi_mod.dev_flags=
  82                         [SCSI] Black/white list entry for vendor and model
  83                         Format: <vendor>:<model>:<flags>
  84                         (flags are integer value)
  85
  86         scsi_mod.scsi_logging_level=
  87                         [SCSI] a bit mask of logging levels
  88                         See drivers/scsi/scsi_logging.h for bits.  Also
  89                         settable via sysctl at dev.scsi.logging_level
  90                         (/proc/sys/dev/scsi/logging_level).
  91                         There is also a nice 'scsi_logging_level' script in the
  92                         S390-tools package, available for download at
  93                         http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
  94
  95         scsi_mod.scan=  [SCSI] sync (default) scans SCSI busses as they are
  96                         discovered.  async scans them in kernel threads,
  97                         allowing boot to proceed.  none ignores them, expecting
  98                         user space to do the scan.
  99
 100         sim710=         [SCSI,HW]
 101                         See header of drivers/scsi/sim710.c.
 102
 103         st=             [HW,SCSI] SCSI tape parameters (buffers, etc.)
 104                         See Documentation/scsi/st.txt.
 105
 106         wd33c93=        [HW,SCSI]
 107                         See header of drivers/scsi/wd33c93.c.