Documentation/devicetree/bindings/usb/renesas_usb3.txt

   1 Renesas Electronics USB3.0 Peripheral driver
   2
   3 Required properties:
   4   - compatible: Must contain one of the following:
   5         - "renesas,r8a7795-usb3-peri"
   6         - "renesas,r8a7796-usb3-peri"
   7         - "renesas,r8a77965-usb3-peri"
   8         - "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible
   9           device
  10
  11     When compatible with the generic version, nodes must list the
  12     SoC-specific version corresponding to the platform first
  13     followed by the generic version.
  14
  15   - reg: Base address and length of the register for the USB3.0 Peripheral
  16   - interrupts: Interrupt specifier for the USB3.0 Peripheral
  17   - clocks: clock phandle and specifier pair
  18
  19 Optional properties:
  20   - phys: phandle + phy specifier pair
  21   - phy-names: must be "usb"
  22
  23 Example of R-Car H3 ES1.x:
  24         usb3_peri0: usb@ee020000 {
  25                 compatible = "renesas,r8a7795-usb3-peri",
  26                              "renesas,rcar-gen3-usb3-peri";
  27                 reg = <0 0xee020000 0 0x400>;
  28                 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
  29                 clocks = <&cpg CPG_MOD 328>;
  30         };
  31
  32         usb3_peri1: usb@ee060000 {
  33                 compatible = "renesas,r8a7795-usb3-peri",
  34                              "renesas,rcar-gen3-usb3-peri";
  35                 reg = <0 0xee060000 0 0x400>;
  36                 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
  37                 clocks = <&cpg CPG_MOD 327>;
  38         };