Documentation/devicetree/bindings/usb/da8xx-usb.txt

   1 TI DA8xx MUSB
   2 ~~~~~~~~~~~~~
   3 For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms.
   4
   5 Required properties:
   6 ~~~~~~~~~~~~~~~~~~~~
   7  - compatible : Should be set to "ti,da830-musb".
   8
   9  - reg: Offset and length of the USB controller register set.
  10
  11  - interrupts: The USB interrupt number.
  12
  13  - interrupt-names: Should be set to "mc".
  14
  15  - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg".
  16
  17  - phys: Phandle for the PHY device
  18
  19  - phy-names: Should be "usb-phy"
  20
  21 Optional properties:
  22 ~~~~~~~~~~~~~~~~~~~~
  23  - vbus-supply: Phandle to a regulator providing the USB bus power.
  24
  25 Example:
  26         usb_phy: usb-phy {
  27                 compatible = "ti,da830-usb-phy";
  28                 #phy-cells = <0>;
  29                 status = "okay";
  30         };
  31         usb0: usb@200000 {
  32                 compatible = "ti,da830-musb";
  33                 reg =   <0x00200000 0x10000>;
  34                 interrupts = <58>;
  35                 interrupt-names = "mc";
  36
  37                 dr_mode = "host";
  38                 vbus-supply = <&usb_vbus>;
  39                 phys = <&usb_phy 0>;
  40                 phy-names = "usb-phy";
  41
  42                 status = "okay";
  43         };