Merge tag 'pwm/for-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry...
[sfrench/cifs-2.6.git] / Documentation / devicetree / bindings / sound / st,sti-asoc-card.txt
1 STMicroelectronics sti ASoC cards
2
3 The sti ASoC Sound Card can be used, for all sti SoCs using internal sti-sas
4 codec or external codecs.
5
6 sti sound drivers allows to expose sti SoC audio interface through the
7 generic ASoC simple card. For details about sound card declaration please refer to
8 Documentation/devicetree/bindings/sound/simple-card.txt.
9
10 1) sti-uniperiph-dai: audio dai device.
11 ---------------------------------------
12
13 Required properties:
14   - compatible: "st,sti-uni-player" or "st,sti-uni-reader"
15
16   - st,syscfg: phandle to boot-device system configuration registers
17
18   - clock-names: name of the clocks listed in clocks property in the same order
19
20   - reg: CPU DAI IP Base address and size entries, listed  in same
21          order than the CPU_DAI properties.
22
23   - reg-names: names of the mapped memory regions listed in regs property in
24                the same order.
25
26   - interrupts: CPU_DAI interrupt line, listed in the same order than the
27                 CPU_DAI properties.
28
29   - dma: CPU_DAI DMA controller phandle and DMA request line, listed in the same
30          order than the CPU_DAI properties.
31
32   - dma-names: identifier string for each DMA request line in the dmas property.
33         "tx" for "st,sti-uni-player" compatibility
34         "rx" for "st,sti-uni-reader" compatibility
35
36   - version: IP version integrated in SOC.
37
38   - dai-name: DAI name that describes the IP.
39
40 Required properties ("st,sti-uni-player" compatibility only):
41   - clocks: CPU_DAI IP clock source, listed in the same order than the
42             CPU_DAI properties.
43
44   - uniperiph-id: internal SOC IP instance ID.
45
46   - IP mode: IP working mode depending on associated codec.
47         "HDMI" connected to HDMI codec IP and IEC HDMI formats.
48         "SPDIF"connected to SPDIF codec and support SPDIF formats.
49         "PCM"  PCM standard mode for I2S or TDM bus.
50
51 Optional properties:
52   - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for
53                external codecs connection.
54
55   - pinctrl-names: should contain only one value - "default".
56
57 Example:
58
59         sti_uni_player2: sti-uni-player@2 {
60                 compatible = "st,sti-uni-player";
61                 status = "okay";
62                 #sound-dai-cells = <0>;
63                 st,syscfg = <&syscfg_core>;
64                 clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
65                 reg = <0x8D82000 0x158>;
66                 interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
67                 dmas = <&fdma0 4 0 1>;
68                 dai-name = "Uni Player #1 (DAC)";
69                 dma-names = "tx";
70                 uniperiph-id = <2>;
71                 version = <5>;
72                 mode = "PCM";
73         };
74
75         sti_uni_player3: sti-uni-player@3 {
76                 compatible = "st,sti-uni-player";
77                 status = "okay";
78                 #sound-dai-cells = <0>;
79                 st,syscfg = <&syscfg_core>;
80                 clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
81                 reg = <0x8D85000 0x158>;
82                 interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
83                 dmas = <&fdma0 7 0 1>;
84                 dma-names = "tx";
85                 dai-name = "Uni Player #1 (PIO)";
86                 uniperiph-id = <3>;
87                 version = <5>;
88                 mode = "SPDIF";
89         };
90
91         sti_uni_reader1: sti-uni-reader@1 {
92                 compatible = "st,sti-uni-reader";
93                 status = "disabled";
94                 #sound-dai-cells = <0>;
95                 st,syscfg = <&syscfg_core>;
96                 reg = <0x8D84000 0x158>;
97                 interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
98                 dmas = <&fdma0 6 0 1>;
99                 dma-names = "rx";
100                 dai-name = "Uni Reader #1 (HDMI RX)";
101                 version = <3>;
102         };
103
104 2) sti-sas-codec: internal audio codec IPs driver
105 -------------------------------------------------
106
107 Required properties:
108   - compatible: "st,sti<chip>-sas-codec" .
109         Should be chip "st,stih416-sas-codec" or "st,stih407-sas-codec"
110
111   - st,syscfg: phandle to boot-device system configuration registers.
112
113   - pinctrl-0: SPDIF PIO description.
114
115   - pinctrl-names: should contain only one value - "default".
116
117 Example:
118         sti_sas_codec: sti-sas-codec {
119                 compatible = "st,stih407-sas-codec";
120                 #sound-dai-cells = <1>;
121                 st,reg_audio = <&syscfg_core>;
122                 pinctrl-names = "default";
123                 pinctrl-0 = <&pinctrl_spdif_out >;
124         };
125
126 Example of audio card declaration:
127         sound {
128                 compatible = "simple-audio-card";
129                 simple-audio-card,name = "sti audio card";
130                 status = "okay";
131
132                 simple-audio-card,dai-link@0 {
133                         /* DAC */
134                         format = "i2s";
135                         dai-tdm-slot-width = <32>;
136                         cpu {
137                                 sound-dai = <&sti_uni_player2>;
138                         };
139
140                         codec {
141                                 sound-dai = <&sti_sasg_codec 1>;
142                         };
143                 };
144                 simple-audio-card,dai-link@1 {
145                         /* SPDIF */
146                         format = "left_j";
147                         cpu {
148                                 sound-dai = <&sti_uni_player3>;
149                         };
150
151                         codec {
152                                 sound-dai = <&sti_sasg_codec 0>;
153                         };
154                 };
155         };