Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt

   1 Texas Instruments TI-SCI Generic Power Domain
   2 ---------------------------------------------
   3
   4 Some TI SoCs contain a system controller (like the PMMC, etc...) that is
   5 responsible for controlling the state of the IPs that are present.
   6 Communication between the host processor running an OS and the system
   7 controller happens through a protocol known as TI-SCI [1].
   8
   9 [1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
  10
  11 PM Domain Node
  12 ==============
  13 The PM domain node represents the global PM domain managed by the PMMC, which
  14 in this case is the implementation as documented by the generic PM domain
  15 bindings in Documentation/devicetree/bindings/power/power_domain.txt.  Because
  16 this relies on the TI SCI protocol to communicate with the PMMC it must be a
  17 child of the pmmc node.
  18
  19 Required Properties:
  20 --------------------
  21 - compatible: should be "ti,sci-pm-domain"
  22 - #power-domain-cells: Can be one of the following:
  23                         1: Containing the device id of each node
  24                         2: First entry should be device id
  25                            Second entry should be one of the floowing:
  26                            TI_SCI_PD_EXCLUSIVE: To allow device to be
  27                                                 exclusively controlled by
  28                                                 the requesting hosts.
  29                            TI_SCI_PD_SHARED: To allow device to be shared
  30                                              by multiple hosts.
  31
  32 Example (K2G):
  33 -------------
  34         pmmc: pmmc {
  35                 compatible = "ti,k2g-sci";
  36                 ...
  37
  38                 k2g_pds: power-controller {
  39                         compatible = "ti,sci-pm-domain";
  40                         #power-domain-cells = <1>;
  41                 };
  42         };
  43
  44 PM Domain Consumers
  45 ===================
  46 Hardware blocks belonging to a PM domain should contain a "power-domains"
  47 property that is a phandle pointing to the corresponding PM domain node
  48 along with an index representing the device id to be passed to the PMMC
  49 for device control.
  50
  51 Required Properties:
  52 --------------------
  53 - power-domains: phandle pointing to the corresponding PM domain node
  54                  and an ID representing the device.
  55
  56 See http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data for the list
  57 of valid identifiers for k2g.
  58
  59 Example (K2G):
  60 --------------------
  61         uart0: serial@2530c00 {
  62                 compatible = "ns16550a";
  63                 ...
  64                 power-domains = <&k2g_pds 0x002c>;
  65         };