1 Serial Slave Device DT binding
3 This documents the binding structure and common properties for serial
4 attached devices. Common examples include Bluetooth, WiFi, NFC and GPS
7 Serial attached devices shall be a child node of the host UART device the
8 slave device is attached to. It is expected that the attached device is
9 the only child node of the UART device. The slave device node name shall
10 reflect the generic type of device for the node.
14 - compatible : A string reflecting the vendor and specific device the node
19 - max-speed : The maximum baud rate the device operates at. This should
20 only be present if the maximum is less than the slave device
21 can support. For example, a particular board has some signal
22 quality issue or the host processor can't support higher
28 compatible = "ns16550a";
32 compatible = "brcm,bcm43341-bt";
33 interrupt-parent = <&gpio>;