Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt

   1 * Microchip Universal Asynchronous Receiver Transmitter (UART)
   2
   3 Required properties:
   4 - compatible: Should be "microchip,pic32mzda-uart"
   5 - reg: Should contain registers location and length
   6 - interrupts: Should contain interrupt
   7 - clocks: Phandle to the clock.
   8           See: Documentation/devicetree/bindings/clock/clock-bindings.txt
   9 - pinctrl-names: A pinctrl state names "default" must be defined.
  10 - pinctrl-0: Phandle referencing pin configuration of the UART peripheral.
  11              See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
  12
  13 Optional properties:
  14 - cts-gpios: CTS pin for UART
  15
  16 Example:
  17         uart1: serial@1f822000 {
  18                 compatible = "microchip,pic32mzda-uart";
  19                 reg = <0x1f822000 0x50>;
  20                 interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
  21                         <113 IRQ_TYPE_LEVEL_HIGH>,
  22                         <114 IRQ_TYPE_LEVEL_HIGH>;
  23                 clocks = <&rootclk PB2CLK>;
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&pinctrl_uart1
  26                                 &pinctrl_uart1_cts
  27                                 &pinctrl_uart1_rts>;
  28                 cts-gpios = <&gpio1 15 0>;
  29         };