1 STMicroelectronics STM32 Timers PWM bindings
3 Must be a sub-node of an STM32 Timers device tree node.
4 See ../mfd/stm32-timers.txt for details about the parent node.
7 - compatible: Must be "st,stm32-pwm".
8 - pinctrl-names: Set to "default".
9 - pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module.
10 For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
11 - #pwm-cells: Should be set to 3. This PWM chip uses the default 3 cells
12 bindings defined in pwm.txt.
15 - st,breakinput: One or two <index level filter> to describe break input configurations.
16 "index" indicates on which break input (0 or 1) the configuration
18 "level" gives the active level (0=low or 1=high) of the input signal
19 for this configuration.
20 "filter" gives the filtering value to be applied.
26 compatible = "st,stm32-timers";
27 reg = <0x40010000 0x400>;
28 clocks = <&rcc 0 160>;
32 compatible = "st,stm32-pwm";
34 pinctrl-0 = <&pwm1_pins>;
35 pinctrl-names = "default";
36 st,breakinput = <0 1 5>;