1 * Amlogic Meson8b and GXBB USB2 PHY
4 - compatible: Depending on the platform this should be one of:
5 "amlogic,meson8b-usb2-phy"
6 "amlogic,meson-gxbb-usb2-phy"
7 - reg: The base address and length of the registers
8 - #phys-cells: should be 0 (see phy-bindings.txt in this directory)
9 - clocks: phandle and clock identifier for the phy clocks
10 - clock-names: "usb_general" and "usb"
13 - resets: reference to the reset controller
14 - phy-supply: see phy-bindings.txt in this directory
19 usb0_phy: usb-phy@c0000000 {
20 compatible = "amlogic,meson-gxbb-usb2-phy";
22 reg = <0x0 0xc0000000 0x0 0x20>;
23 resets = <&reset RESET_USB_OTG>;
24 clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
25 clock-names = "usb_general", "usb";
26 phy-supply = <&usb_vbus>;