1 * Broadcom SATA3 PHY for STB
4 - compatible: should be one or more of
5 "brcm,bcm7425-sata-phy"
6 "brcm,bcm7445-sata-phy"
8 - address-cells: should be 1
9 - size-cells: should be 0
10 - reg: register range for the PHY PCB interface
11 - reg-names: should be "phy"
14 Each port's PHY should be represented as a sub-node.
16 Sub-nodes required properties:
18 - phy-cells: generic PHY binding; must be 0
20 - brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
26 compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
27 reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;