Documentation/devicetree/bindings/net/nixge.txt

   1 * NI XGE Ethernet controller
   2
   3 Required properties:
   4 - compatible: Should be "ni,xge-enet-2.00"
   5 - reg: Address and length of the register set for the device
   6 - interrupts: Should contain tx and rx interrupt
   7 - interrupt-names: Should be "rx" and "tx"
   8 - phy-mode: See ethernet.txt file in the same directory.
   9 - phy-handle: See ethernet.txt file in the same directory.
  10 - nvmem-cells: Phandle of nvmem cell containing the MAC address
  11 - nvmem-cell-names: Should be "address"
  12
  13 Examples (10G generic PHY):
  14         nixge0: ethernet@40000000 {
  15                 compatible = "ni,xge-enet-2.00";
  16                 reg = <0x40000000 0x6000>;
  17
  18                 nvmem-cells = <&eth1_addr>;
  19                 nvmem-cell-names = "address";
  20
  21                 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
  22                 interrupt-names = "rx", "tx";
  23                 interrupt-parent = <&intc>;
  24
  25                 phy-mode = "xgmii";
  26                 phy-handle = <&ethernet_phy1>;
  27
  28                 ethernet_phy1: ethernet-phy@4 {
  29                         compatible = "ethernet-phy-ieee802.3-c45";
  30                         reg = <4>;
  31                 };
  32         };