1 STM32 Timers driver bindings
3 This IP provides 3 types of timer along with PWM functionality:
4 - advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable
5 prescaler, break input feature, PWM outputs and complementary PWM ouputs channels.
6 - general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a
7 programmable prescaler and PWM outputs.
8 - basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler.
11 - compatible: must be "st,stm32-timers"
13 - reg: Physical base address and length of the controller's
15 - clock-names: Set to "int".
16 - clocks: Phandle to the clock used by the timer module.
17 For Clk properties, please refer to ../clock/clock-bindings.txt
20 - resets: Phandle to the parent reset controller.
21 See ../reset/st,stm32-rcc.txt
22 - dmas: List of phandle to dma channels that can be used for
23 this timer instance. There may be up to 7 dma channels.
24 - dma-names: List of dma names. Must match 'dmas' property. Valid
25 names are: "ch1", "ch2", "ch3", "ch4", "up", "trig",
29 - pwm: See ../pwm/pwm-stm32.txt
30 - timer: See ../iio/timer/stm32-timer-trigger.txt
31 - counter: See ../counter/stm32-timer-cnt.txt
37 compatible = "st,stm32-timers";
38 reg = <0x40010000 0x400>;
39 clocks = <&rcc 0 160>;
43 compatible = "st,stm32-pwm";
44 pinctrl-0 = <&pwm1_pins>;
45 pinctrl-names = "default";
49 compatible = "st,stm32-timer-trigger";
54 compatible = "st,stm32-timer-counter";
55 pinctrl-names = "default";
56 pinctrl-0 = <&tim1_in_pins>;
60 Example with all dmas:
63 dmas = <&dmamux1 11 0x400 0x0>,
64 <&dmamux1 12 0x400 0x0>,
65 <&dmamux1 13 0x400 0x0>,
66 <&dmamux1 14 0x400 0x0>,
67 <&dmamux1 15 0x400 0x0>,
68 <&dmamux1 16 0x400 0x0>,
69 <&dmamux1 17 0x400 0x0>;
70 dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig", "com";