Documentation/devicetree/bindings/media/cdns,csi2tx.txt

   1 Cadence MIPI-CSI2 TX controller
   2 ===============================
   3
   4 The Cadence MIPI-CSI2 TX controller is a CSI-2 bridge supporting up to
   5 4 CSI lanes in output, and up to 4 different pixel streams in input.
   6
   7 Required properties:
   8   - compatible: must be set to "cdns,csi2tx" or "cdns,csi2tx-1.3"
   9     for version 1.3 of the controller, "cdns,csi2tx-2.1" for v2.1
  10   - reg: base address and size of the memory mapped region
  11   - clocks: phandles to the clocks driving the controller
  12   - clock-names: must contain:
  13     * esc_clk: escape mode clock
  14     * p_clk: register bank clock
  15     * pixel_if[0-3]_clk: pixel stream output clock, one for each stream
  16                          implemented in hardware, between 0 and 3
  17
  18 Optional properties
  19   - phys: phandle to the D-PHY. If it is set, phy-names need to be set
  20   - phy-names: must contain "dphy"
  21
  22 Required subnodes:
  23   - ports: A ports node with one port child node per device input and output
  24            port, in accordance with the video interface bindings defined in
  25            Documentation/devicetree/bindings/media/video-interfaces.txt. The
  26            port nodes are numbered as follows.
  27
  28            Port Description
  29            -----------------------------
  30            0    CSI-2 output
  31            1    Stream 0 input
  32            2    Stream 1 input
  33            3    Stream 2 input
  34            4    Stream 3 input
  35
  36            The stream input port nodes are optional if they are not
  37            connected to anything at the hardware level or implemented
  38            in the design. Since there is only one endpoint per port,
  39            the endpoints are not numbered.
  40
  41 Example:
  42
  43 csi2tx: csi-bridge@0d0e1000 {
  44         compatible = "cdns,csi2tx";
  45         reg = <0x0d0e1000 0x1000>;
  46         clocks = <&byteclock>, <&byteclock>,
  47                  <&coreclock>, <&coreclock>,
  48                  <&coreclock>, <&coreclock>;
  49         clock-names = "p_clk", "esc_clk",
  50                       "pixel_if0_clk", "pixel_if1_clk",
  51                       "pixel_if2_clk", "pixel_if3_clk";
  52
  53         ports {
  54                 #address-cells = <1>;
  55                 #size-cells = <0>;
  56
  57                 port@0 {
  58                         reg = <0>;
  59
  60                         csi2tx_out: endpoint {
  61                                 remote-endpoint = <&remote_in>;
  62                                 clock-lanes = <0>;
  63                                 data-lanes = <1 2>;
  64                         };
  65                 };
  66
  67                 port@1 {
  68                         reg = <1>;
  69
  70                         csi2tx_in_stream0: endpoint {
  71                                 remote-endpoint = <&stream0_out>;
  72                         };
  73                 };
  74
  75                 port@2 {
  76                         reg = <2>;
  77
  78                         csi2tx_in_stream1: endpoint {
  79                                 remote-endpoint = <&stream1_out>;
  80                         };
  81                 };
  82
  83                 port@3 {
  84                         reg = <3>;
  85
  86                         csi2tx_in_stream2: endpoint {
  87                                 remote-endpoint = <&stream2_out>;
  88                         };
  89                 };
  90
  91                 port@4 {
  92                         reg = <4>;
  93
  94                         csi2tx_in_stream3: endpoint {
  95                                 remote-endpoint = <&stream3_out>;
  96                         };
  97                 };
  98         };
  99 };