Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt

   1 * MELFAS MIP4 Touchscreen
   2
   3 Required properties:
   4 - compatible: must be "melfas,mip4_ts"
   5 - reg: I2C slave address of the chip (0x48 or 0x34)
   6 - interrupt-parent: interrupt controller to which the chip is connected
   7 - interrupts: interrupt to which the chip is connected
   8
   9 Optional properties:
  10 - ce-gpios: GPIO connected to the CE (chip enable) pin of the chip
  11
  12 Example:
  13         i2c@00000000 {
  14                 touchscreen: melfas_mip4@48 {
  15                         compatible = "melfas,mip4_ts";
  16                         reg = <0x48>;
  17                         interrupt-parent = <&gpio>;
  18                         interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
  19                         ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  20                 };
  21         };