Documentation/devicetree/bindings/input/touchscreen/goodix.txt

   1 Device tree bindings for Goodix GT9xx series touchscreen controller
   2
   3 Required properties:
   4
   5  - compatible           : Should be "goodix,gt1151"
   6                                  or "goodix,gt911"
   7                                  or "goodix,gt9110"
   8                                  or "goodix,gt912"
   9                                  or "goodix,gt927"
  10                                  or "goodix,gt9271"
  11                                  or "goodix,gt928"
  12                                  or "goodix,gt967"
  13  - reg                  : I2C address of the chip. Should be 0x5d or 0x14
  14  - interrupts           : Interrupt to which the chip is connected
  15
  16 Optional properties:
  17
  18  - irq-gpios            : GPIO pin used for IRQ. The driver uses the
  19                           interrupt gpio pin as output to reset the device.
  20  - reset-gpios          : GPIO pin used for reset
  21
  22  - touchscreen-inverted-x  : X axis is inverted (boolean)
  23  - touchscreen-inverted-y  : Y axis is inverted (boolean)
  24  - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
  25                              (swapping is done after inverting the axis)
  26
  27 Example:
  28
  29         i2c@00000000 {
  30                 /* ... */
  31
  32                 gt928@5d {
  33                         compatible = "goodix,gt928";
  34                         reg = <0x5d>;
  35                         interrupt-parent = <&gpio>;
  36                         interrupts = <0 0>;
  37
  38                         irq-gpios = <&gpio1 0 0>;
  39                         reset-gpios = <&gpio1 1 0>;
  40                 };
  41
  42                 /* ... */
  43         };