Documentation/devicetree/bindings/input/touchscreen/goodix.txt

   1 Device tree bindings for Goodix GT9xx series touchscreen controller
   2
   3 Required properties:
   4
   5  - compatible           : Should be "goodix,gt1151"
   6                                  or "goodix,gt5688"
   7                                  or "goodix,gt911"
   8                                  or "goodix,gt9110"
   9                                  or "goodix,gt912"
  10                                  or "goodix,gt927"
  11                                  or "goodix,gt9271"
  12                                  or "goodix,gt928"
  13                                  or "goodix,gt967"
  14  - reg                  : I2C address of the chip. Should be 0x5d or 0x14
  15  - interrupts           : Interrupt to which the chip is connected
  16
  17 Optional properties:
  18
  19  - irq-gpios            : GPIO pin used for IRQ. The driver uses the
  20                           interrupt gpio pin as output to reset the device.
  21  - reset-gpios          : GPIO pin used for reset
  22  - touchscreen-inverted-x
  23  - touchscreen-inverted-y
  24  - touchscreen-size-x
  25  - touchscreen-size-y
  26  - touchscreen-swapped-x-y
  27
  28 The touchscreen-* properties are documented in touchscreen.txt in this
  29 directory.
  30
  31 Example:
  32
  33         i2c@00000000 {
  34                 /* ... */
  35
  36                 gt928@5d {
  37                         compatible = "goodix,gt928";
  38                         reg = <0x5d>;
  39                         interrupt-parent = <&gpio>;
  40                         interrupts = <0 0>;
  41
  42                         irq-gpios = <&gpio1 0 0>;
  43                         reset-gpios = <&gpio1 1 0>;
  44                 };
  45
  46                 /* ... */
  47         };