1 Device tree bindings for Goodix GT9xx series touchscreen controller
5 - compatible : Should be "goodix,gt1151"
13 - reg : I2C address of the chip. Should be 0x5d or 0x14
14 - interrupt-parent : Interrupt controller to which the chip is connected
15 - interrupts : Interrupt to which the chip is connected
19 - irq-gpios : GPIO pin used for IRQ. The driver uses the
20 interrupt gpio pin as output to reset the device.
21 - reset-gpios : GPIO pin used for reset
23 - touchscreen-inverted-x : X axis is inverted (boolean)
24 - touchscreen-inverted-y : Y axis is inverted (boolean)
25 - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
26 (swapping is done after inverting the axis)
34 compatible = "goodix,gt928";
36 interrupt-parent = <&gpio>;
39 irq-gpios = <&gpio1 0 0>;
40 reset-gpios = <&gpio1 1 0>;