Documentation/devicetree/bindings/iio/health/max30102.txt

   1 Maxim MAX30102 heart rate and pulse oximeter sensor
   2 Maxim MAX30105 optical particle-sensing module
   3
   4 * https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf
   5 * https://datasheets.maximintegrated.com/en/ds/MAX30105.pdf
   6
   7 Required properties:
   8   - compatible: must be "maxim,max30102" or "maxim,max30105"
   9   - reg: the I2C address of the sensor
  10   - interrupts: the sole interrupt generated by the device
  11
  12   Refer to interrupt-controller/interrupts.txt for generic
  13   interrupt client node bindings.
  14
  15 Optional properties:
  16   - maxim,red-led-current-microamp: configuration for red LED current
  17   - maxim,ir-led-current-microamp: configuration for IR LED current
  18   - maxim,green-led-current-microamp: configuration for green LED current
  19     (max30105 only)
  20
  21     Note that each step is approximately 200 microamps, ranging from 0 uA to
  22     50800 uA.
  23
  24 Example:
  25
  26 max30102@57 {
  27         compatible = "maxim,max30102";
  28         reg = <0x57>;
  29         maxim,red-led-current-microamp = <7000>;
  30         maxim,ir-led-current-microamp = <7000>;
  31         interrupt-parent = <&gpio1>;
  32         interrupts = <16 2>;
  33 };