Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt

   1 Bindings for Synopsys DesignWare I3C master block
   2 =================================================
   3
   4 Required properties:
   5 --------------------
   6 - compatible: shall be "snps,dw-i3c-master-1.00a"
   7 - clocks: shall reference the core_clk
   8 - interrupts: the interrupt line connected to this I3C master
   9 - reg: Offset and length of I3C master registers
  10
  11 Mandatory properties defined by the generic binding (see
  12 Documentation/devicetree/bindings/i3c/i3c.txt for more details):
  13
  14 - #address-cells: shall be set to 3
  15 - #size-cells: shall be set to 0
  16
  17 Optional properties defined by the generic binding (see
  18 Documentation/devicetree/bindings/i3c/i3c.txt for more details):
  19
  20 - i2c-scl-hz
  21 - i3c-scl-hz
  22
  23 I3C device connected on the bus follow the generic description (see
  24 Documentation/devicetree/bindings/i3c/i3c.txt for more details).
  25
  26 Example:
  27
  28         i3c-master@2000 {
  29                 compatible = "snps,dw-i3c-master-1.00a";
  30                 #address-cells = <3>;
  31                 #size-cells = <0>;
  32                 reg = <0x02000 0x1000>;
  33                 interrupts = <0>;
  34                 clocks = <&i3cclk>;
  35
  36                 eeprom@57{
  37                         compatible = "atmel,24c01";
  38                         reg = <0x57 0x0 0x10>;
  39                         pagesize = <0x8>;
  40                 };
  41         };