Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt

   1 Sitronix ST7789V RGB panel with SPI control bus
   2
   3 Required properties:
   4   - compatible: "sitronix,st7789v"
   5   - reg: Chip select of the panel on the SPI bus
   6   - reset-gpios: a GPIO phandle for the reset pin
   7   - power-supply: phandle of the regulator that provides the supply voltage
   8
   9 Optional properties:
  10   - backlight: phandle to the backlight used
  11
  12 The generic bindings for the SPI slaves documented in [1] also applies
  13
  14 The device node can contain one 'port' child node with one child
  15 'endpoint' node, according to the bindings defined in [2]. This
  16 node should describe panel's video bus.
  17
  18 [1]: Documentation/devicetree/bindings/spi/spi-bus.txt
  19 [2]: Documentation/devicetree/bindings/graph.txt
  20
  21 Example:
  22
  23 panel@0 {
  24         compatible = "sitronix,st7789v";
  25         reg = <0>;
  26         reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
  27         backlight = <&pwm_bl>;
  28         spi-max-frequency = <100000>;
  29         spi-cpol;
  30         spi-cpha;
  31
  32         port {
  33                 panel_input: endpoint {
  34                         remote-endpoint = <&tcon0_out_panel>;
  35                 };
  36         };
  37 };