Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt

   1 Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
   2
   3 Required properties:
   4 - compatible: should be "koe,tx14d24vm1bpa"
   5 - backlight: phandle of the backlight device attached to the panel
   6 - power-supply: single regulator to provide the supply voltage
   7
   8 Required nodes:
   9 - port: Parallel port mapping to connect this display
  10
  11 This panel needs single power supply voltage. Its backlight is conntrolled
  12 via PWM signal.
  13
  14 Example:
  15 --------
  16
  17 Example device-tree definition when connected to iMX53 based board
  18
  19         lcd_panel: lcd-panel {
  20                 compatible = "koe,tx14d24vm1bpa";
  21                 backlight = <&backlight_lcd>;
  22                 power-supply = <&reg_3v3>;
  23
  24                 port {
  25                         lcd_panel_in: endpoint {
  26                                 remote-endpoint = <&lcd_display_out>;
  27                         };
  28                 };
  29         };
  30
  31 Then one needs to extend the dispX node:
  32
  33         lcd_display: disp1 {
  34
  35                 port@1 {
  36                         reg = <1>;
  37
  38                         lcd_display_out: endpoint {
  39                                 remote-endpoint = <&lcd_panel_in>;
  40                         };
  41                 };
  42         };