Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt

   1 Renesas Gen3 DWC HDMI TX Encoder
   2 ================================
   3
   4 The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
   5 with a companion PHY IP.
   6
   7 These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
   8 Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
   9 following device-specific properties.
  10
  11
  12 Required properties:
  13
  14 - compatible : Shall contain one or more of
  15   - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX
  16   - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 compatible HDMI TX
  17
  18     When compatible with generic versions, nodes must list the SoC-specific
  19     version corresponding to the platform first, followed by the
  20     family-specific version.
  21
  22 - reg: See dw_hdmi.txt.
  23 - interrupts: HDMI interrupt number
  24 - clocks: See dw_hdmi.txt.
  25 - clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
  26 - ports: See dw_hdmi.txt. The DWC HDMI shall have one port numbered 0
  27   corresponding to the video input of the controller and one port numbered 1
  28   corresponding to its HDMI output. Each port shall have a single endpoint.
  29
  30 Optional properties:
  31
  32 - power-domains: Shall reference the power domain that contains the DWC HDMI,
  33   if any.
  34
  35
  36 Example:
  37
  38         hdmi0: hdmi0@fead0000 {
  39                 compatible = "renesas,r8a7795-dw-hdmi";
  40                 reg = <0 0xfead0000 0 0x10000>;
  41                 interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>;
  42                 clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
  43                 clock-names = "iahb", "isfr";
  44                 power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
  45                 status = "disabled";
  46
  47                 ports {
  48                         #address-cells = <1>;
  49                         #size-cells = <0>;
  50                         port@0 {
  51                                 reg = <0>;
  52                                 dw_hdmi0_in: endpoint {
  53                                         remote-endpoint = <&du_out_hdmi0>;
  54                                 };
  55                         };
  56                         port@1 {
  57                                 reg = <1>;
  58                                 rcar_dw_hdmi0_out: endpoint {
  59                                         remote-endpoint = <&hdmi0_con>;
  60                                 };
  61                         };
  62                 };
  63         };
  64
  65         hdmi0-out {
  66                 compatible = "hdmi-connector";
  67                 label = "HDMI0 OUT";
  68                 type = "a";
  69
  70                 port {
  71                         hdmi0_con: endpoint {
  72                                 remote-endpoint = <&rcar_dw_hdmi0_out>;
  73                         };
  74                 };
  75         };