3 <para>The following chapters document the evolution of the V4L2 API,
4 errata or extensions. They are also intended to help application and
5 driver writers to port or update their code.</para>
7 <section id="diff-v4l">
8 <title>Differences between V4L and V4L2</title>
10 <para>The Video For Linux API was first introduced in Linux 2.1 to
11 unify and replace various TV and radio device related interfaces,
12 developed independently by driver writers in prior years. Starting
13 with Linux 2.5 the much improved V4L2 API replaces the V4L API,
14 although existing drivers will continue to support V4L applications in
15 the future, either directly or through the V4L2 compatibility layer in
16 the <filename>videodev</filename> kernel module translating ioctls on
17 the fly. For a transition period not all drivers will support the V4L2
21 <title>Opening and Closing Devices</title>
23 <para>For compatibility reasons the character device file names
24 recommended for V4L2 video capture, overlay, radio, teletext and raw
25 vbi capture devices did not change from those used by V4L. They are
26 listed in <xref linkend="devices" /> and below in <xref
27 linkend="v4l-dev" />.</para>
29 <para>The V4L <filename>videodev</filename> module automatically
30 assigns minor numbers to drivers in load order, depending on the
31 registered device type. We recommend that V4L2 drivers by default
32 register devices with the same numbers, but the system administrator
33 can assign arbitrary minor numbers using driver module options. The
34 major device number remains 81.</para>
37 <title>V4L Device Types, Names and Numbers</title>
41 <entry>Device Type</entry>
42 <entry>File Name</entry>
43 <entry>Minor Numbers</entry>
48 <entry>Video capture and overlay</entry>
49 <entry><para><filename>/dev/video</filename> and
50 <filename>/dev/bttv0</filename><footnote> <para>According to
51 Documentation/devices.txt these should be symbolic links to
52 <filename>/dev/video0</filename>. Note the original bttv interface is
53 not compatible with V4L or V4L2.</para> </footnote>,
54 <filename>/dev/video0</filename> to
55 <filename>/dev/video63</filename></para></entry>
59 <entry>Radio receiver</entry>
60 <entry><para><filename>/dev/radio</filename><footnote>
62 <filename>Documentation/devices.txt</filename> a symbolic link to
63 <filename>/dev/radio0</filename>.</para>
64 </footnote>, <filename>/dev/radio0</filename> to
65 <filename>/dev/radio63</filename></para></entry>
69 <entry>Teletext decoder</entry>
70 <entry><para><filename>/dev/vtx</filename>,
71 <filename>/dev/vtx0</filename> to
72 <filename>/dev/vtx31</filename></para></entry>
73 <entry>192-223</entry>
76 <entry>Raw VBI capture</entry>
77 <entry><para><filename>/dev/vbi</filename>,
78 <filename>/dev/vbi0</filename> to
79 <filename>/dev/vbi31</filename></para></entry>
80 <entry>224-255</entry>
86 <para>V4L prohibits (or used to prohibit) multiple opens of a
87 device file. V4L2 drivers <emphasis>may</emphasis> support multiple
88 opens, see <xref linkend="open" /> for details and consequences.</para>
90 <para>V4L drivers respond to V4L2 ioctls with an &EINVAL;. The
91 compatibility layer in the V4L2 <filename>videodev</filename> module
92 can translate V4L ioctl requests to their V4L2 counterpart, however a
93 V4L2 driver usually needs more preparation to become fully V4L
94 compatible. This is covered in more detail in <xref
95 linkend="driver" />.</para>
99 <title>Querying Capabilities</title>
101 <para>The V4L <constant>VIDIOCGCAP</constant> ioctl is
102 equivalent to V4L2's &VIDIOC-QUERYCAP;.</para>
104 <para>The <structfield>name</structfield> field in struct
105 <structname>video_capability</structname> became
106 <structfield>card</structfield> in &v4l2-capability;,
107 <structfield>type</structfield> was replaced by
108 <structfield>capabilities</structfield>. Note V4L2 does not
109 distinguish between device types like this, better think of basic
110 video input, video output and radio devices supporting a set of
111 related functions like video capturing, video overlay and VBI
112 capturing. See <xref linkend="open" /> for an
113 introduction.<informaltable>
118 <structname>video_capability</structname>
119 <structfield>type</structfield></entry>
120 <entry>&v4l2-capability;
121 <structfield>capabilities</structfield> flags</entry>
122 <entry>Purpose</entry>
127 <entry><constant>VID_TYPE_CAPTURE</constant></entry>
128 <entry><constant>V4L2_CAP_VIDEO_CAPTURE</constant></entry>
129 <entry>The <link linkend="capture">video
130 capture</link> interface is supported.</entry>
133 <entry><constant>VID_TYPE_TUNER</constant></entry>
134 <entry><constant>V4L2_CAP_TUNER</constant></entry>
135 <entry>The device has a <link linkend="tuner">tuner or
136 modulator</link>.</entry>
139 <entry><constant>VID_TYPE_TELETEXT</constant></entry>
140 <entry><constant>V4L2_CAP_VBI_CAPTURE</constant></entry>
141 <entry>The <link linkend="raw-vbi">raw VBI
142 capture</link> interface is supported.</entry>
145 <entry><constant>VID_TYPE_OVERLAY</constant></entry>
146 <entry><constant>V4L2_CAP_VIDEO_OVERLAY</constant></entry>
147 <entry>The <link linkend="overlay">video
148 overlay</link> interface is supported.</entry>
151 <entry><constant>VID_TYPE_CHROMAKEY</constant></entry>
152 <entry><constant>V4L2_FBUF_CAP_CHROMAKEY</constant> in
153 field <structfield>capability</structfield> of
154 &v4l2-framebuffer;</entry>
155 <entry>Whether chromakey overlay is supported. For
156 more information on overlay see
157 <xref linkend="overlay" />.</entry>
160 <entry><constant>VID_TYPE_CLIPPING</constant></entry>
161 <entry><constant>V4L2_FBUF_CAP_LIST_CLIPPING</constant>
162 and <constant>V4L2_FBUF_CAP_BITMAP_CLIPPING</constant> in field
163 <structfield>capability</structfield> of &v4l2-framebuffer;</entry>
164 <entry>Whether clipping the overlaid image is
165 supported, see <xref linkend="overlay" />.</entry>
168 <entry><constant>VID_TYPE_FRAMERAM</constant></entry>
169 <entry><constant>V4L2_FBUF_CAP_EXTERNOVERLAY</constant>
170 <emphasis>not set</emphasis> in field
171 <structfield>capability</structfield> of &v4l2-framebuffer;</entry>
172 <entry>Whether overlay overwrites frame buffer memory,
173 see <xref linkend="overlay" />.</entry>
176 <entry><constant>VID_TYPE_SCALES</constant></entry>
177 <entry><constant>-</constant></entry>
178 <entry>This flag indicates if the hardware can scale
179 images. The V4L2 API implies the scale factor by setting the cropping
180 dimensions and image size with the &VIDIOC-S-CROP; and &VIDIOC-S-FMT;
181 ioctl, respectively. The driver returns the closest sizes possible.
182 For more information on cropping and scaling see <xref
183 linkend="crop" />.</entry>
186 <entry><constant>VID_TYPE_MONOCHROME</constant></entry>
187 <entry><constant>-</constant></entry>
188 <entry>Applications can enumerate the supported image
189 formats with the &VIDIOC-ENUM-FMT; ioctl to determine if the device
190 supports grey scale capturing only. For more information on image
191 formats see <xref linkend="pixfmt" />.</entry>
194 <entry><constant>VID_TYPE_SUBCAPTURE</constant></entry>
195 <entry><constant>-</constant></entry>
196 <entry>Applications can call the &VIDIOC-G-CROP; ioctl
197 to determine if the device supports capturing a subsection of the full
198 picture ("cropping" in V4L2). If not, the ioctl returns the &EINVAL;.
199 For more information on cropping and scaling see <xref
200 linkend="crop" />.</entry>
203 <entry><constant>VID_TYPE_MPEG_DECODER</constant></entry>
204 <entry><constant>-</constant></entry>
205 <entry>Applications can enumerate the supported image
206 formats with the &VIDIOC-ENUM-FMT; ioctl to determine if the device
207 supports MPEG streams.</entry>
210 <entry><constant>VID_TYPE_MPEG_ENCODER</constant></entry>
211 <entry><constant>-</constant></entry>
212 <entry>See above.</entry>
215 <entry><constant>VID_TYPE_MJPEG_DECODER</constant></entry>
216 <entry><constant>-</constant></entry>
217 <entry>See above.</entry>
220 <entry><constant>VID_TYPE_MJPEG_ENCODER</constant></entry>
221 <entry><constant>-</constant></entry>
222 <entry>See above.</entry>
226 </informaltable></para>
228 <para>The <structfield>audios</structfield> field was replaced
229 by <structfield>capabilities</structfield> flag
230 <constant>V4L2_CAP_AUDIO</constant>, indicating
231 <emphasis>if</emphasis> the device has any audio inputs or outputs. To
232 determine their number applications can enumerate audio inputs with
233 the &VIDIOC-G-AUDIO; ioctl. The audio ioctls are described in <xref
234 linkend="audio" />.</para>
236 <para>The <structfield>maxwidth</structfield>,
237 <structfield>maxheight</structfield>,
238 <structfield>minwidth</structfield> and
239 <structfield>minheight</structfield> fields were removed. Calling the
240 &VIDIOC-S-FMT; or &VIDIOC-TRY-FMT; ioctl with the desired dimensions
241 returns the closest size possible, taking into account the current
242 video standard, cropping and scaling limitations.</para>
246 <title>Video Sources</title>
248 <para>V4L provides the <constant>VIDIOCGCHAN</constant> and
249 <constant>VIDIOCSCHAN</constant> ioctl using struct
250 <structname>video_channel</structname> to enumerate
251 the video inputs of a V4L device. The equivalent V4L2 ioctls
252 are &VIDIOC-ENUMINPUT;, &VIDIOC-G-INPUT; and &VIDIOC-S-INPUT;
253 using &v4l2-input; as discussed in <xref linkend="video" />.</para>
255 <para>The <structfield>channel</structfield> field counting
256 inputs was renamed to <structfield>index</structfield>, the video
257 input types were renamed as follows: <informaltable>
261 <entry>struct <structname>video_channel</structname>
262 <structfield>type</structfield></entry>
264 <structfield>type</structfield></entry>
269 <entry><constant>VIDEO_TYPE_TV</constant></entry>
270 <entry><constant>V4L2_INPUT_TYPE_TUNER</constant></entry>
273 <entry><constant>VIDEO_TYPE_CAMERA</constant></entry>
274 <entry><constant>V4L2_INPUT_TYPE_CAMERA</constant></entry>
278 </informaltable></para>
280 <para>Unlike the <structfield>tuners</structfield> field
281 expressing the number of tuners of this input, V4L2 assumes each video
282 input is connected to at most one tuner. However a tuner can have more
283 than one input, &ie; RF connectors, and a device can have multiple
284 tuners. The index number of the tuner associated with the input, if
285 any, is stored in field <structfield>tuner</structfield> of
286 &v4l2-input;. Enumeration of tuners is discussed in <xref
287 linkend="tuner" />.</para>
289 <para>The redundant <constant>VIDEO_VC_TUNER</constant> flag was
290 dropped. Video inputs associated with a tuner are of type
291 <constant>V4L2_INPUT_TYPE_TUNER</constant>. The
292 <constant>VIDEO_VC_AUDIO</constant> flag was replaced by the
293 <structfield>audioset</structfield> field. V4L2 considers devices with
294 up to 32 audio inputs. Each set bit in the
295 <structfield>audioset</structfield> field represents one audio input
296 this video input combines with. For information about audio inputs and
297 how to switch between them see <xref linkend="audio" />.</para>
299 <para>The <structfield>norm</structfield> field describing the
300 supported video standards was replaced by
301 <structfield>std</structfield>. The V4L specification mentions a flag
302 <constant>VIDEO_VC_NORM</constant> indicating whether the standard can
303 be changed. This flag was a later addition together with the
304 <structfield>norm</structfield> field and has been removed in the
305 meantime. V4L2 has a similar, albeit more comprehensive approach
306 to video standards, see <xref linkend="standard" /> for more
311 <title>Tuning</title>
313 <para>The V4L <constant>VIDIOCGTUNER</constant> and
314 <constant>VIDIOCSTUNER</constant> ioctl and struct
315 <structname>video_tuner</structname> can be used to enumerate the
316 tuners of a V4L TV or radio device. The equivalent V4L2 ioctls are
317 &VIDIOC-G-TUNER; and &VIDIOC-S-TUNER; using &v4l2-tuner;. Tuners are
318 covered in <xref linkend="tuner" />.</para>
320 <para>The <structfield>tuner</structfield> field counting tuners
321 was renamed to <structfield>index</structfield>. The fields
322 <structfield>name</structfield>, <structfield>rangelow</structfield>
323 and <structfield>rangehigh</structfield> remained unchanged.</para>
325 <para>The <constant>VIDEO_TUNER_PAL</constant>,
326 <constant>VIDEO_TUNER_NTSC</constant> and
327 <constant>VIDEO_TUNER_SECAM</constant> flags indicating the supported
328 video standards were dropped. This information is now contained in the
329 associated &v4l2-input;. No replacement exists for the
330 <constant>VIDEO_TUNER_NORM</constant> flag indicating whether the
331 video standard can be switched. The <structfield>mode</structfield>
332 field to select a different video standard was replaced by a whole new
333 set of ioctls and structures described in <xref linkend="standard" />.
334 Due to its ubiquity it should be mentioned the BTTV driver supports
335 several standards in addition to the regular
336 <constant>VIDEO_MODE_PAL</constant> (0),
337 <constant>VIDEO_MODE_NTSC</constant>,
338 <constant>VIDEO_MODE_SECAM</constant> and
339 <constant>VIDEO_MODE_AUTO</constant> (3). Namely N/PAL Argentina,
340 M/PAL, N/PAL, and NTSC Japan with numbers 3-6 (sic).</para>
342 <para>The <constant>VIDEO_TUNER_STEREO_ON</constant> flag
343 indicating stereo reception became
344 <constant>V4L2_TUNER_SUB_STEREO</constant> in field
345 <structfield>rxsubchans</structfield>. This field also permits the
346 detection of monaural and bilingual audio, see the definition of
347 &v4l2-tuner; for details. Presently no replacement exists for the
348 <constant>VIDEO_TUNER_RDS_ON</constant> and
349 <constant>VIDEO_TUNER_MBS_ON</constant> flags.</para>
351 <para> The <constant>VIDEO_TUNER_LOW</constant> flag was renamed
352 to <constant>V4L2_TUNER_CAP_LOW</constant> in the &v4l2-tuner;
353 <structfield>capability</structfield> field.</para>
355 <para>The <constant>VIDIOCGFREQ</constant> and
356 <constant>VIDIOCSFREQ</constant> ioctl to change the tuner frequency
357 where renamed to &VIDIOC-G-FREQUENCY; and &VIDIOC-S-FREQUENCY;. They
358 take a pointer to a &v4l2-frequency; instead of an unsigned long
362 <section id="v4l-image-properties">
363 <title>Image Properties</title>
365 <para>V4L2 has no equivalent of the
366 <constant>VIDIOCGPICT</constant> and <constant>VIDIOCSPICT</constant>
367 ioctl and struct <structname>video_picture</structname>. The following
368 fields where replaced by V4L2 controls accessible with the
369 &VIDIOC-QUERYCTRL;, &VIDIOC-G-CTRL; and &VIDIOC-S-CTRL; ioctls:<informaltable>
373 <entry>struct <structname>video_picture</structname></entry>
374 <entry>V4L2 Control ID</entry>
379 <entry><structfield>brightness</structfield></entry>
380 <entry><constant>V4L2_CID_BRIGHTNESS</constant></entry>
383 <entry><structfield>hue</structfield></entry>
384 <entry><constant>V4L2_CID_HUE</constant></entry>
387 <entry><structfield>colour</structfield></entry>
388 <entry><constant>V4L2_CID_SATURATION</constant></entry>
391 <entry><structfield>contrast</structfield></entry>
392 <entry><constant>V4L2_CID_CONTRAST</constant></entry>
395 <entry><structfield>whiteness</structfield></entry>
396 <entry><constant>V4L2_CID_WHITENESS</constant></entry>
400 </informaltable></para>
402 <para>The V4L picture controls are assumed to range from 0 to
403 65535 with no particular reset value. The V4L2 API permits arbitrary
404 limits and defaults which can be queried with the &VIDIOC-QUERYCTRL;
405 ioctl. For general information about controls see <xref
406 linkend="control" />.</para>
408 <para>The <structfield>depth</structfield> (average number of
409 bits per pixel) of a video image is implied by the selected image
410 format. V4L2 does not explicitely provide such information assuming
411 applications recognizing the format are aware of the image depth and
412 others need not know. The <structfield>palette</structfield> field
413 moved into the &v4l2-pix-format;:<informaltable>
417 <entry>struct <structname>video_picture</structname>
418 <structfield>palette</structfield></entry>
419 <entry>&v4l2-pix-format;
420 <structfield>pixfmt</structfield></entry>
425 <entry><constant>VIDEO_PALETTE_GREY</constant></entry>
427 linkend="V4L2-PIX-FMT-GREY"><constant>V4L2_PIX_FMT_GREY</constant></link></para></entry>
430 <entry><constant>VIDEO_PALETTE_HI240</constant></entry>
432 linkend="pixfmt-reserved"><constant>V4L2_PIX_FMT_HI240</constant></link><footnote>
433 <para>This is a custom format used by the BTTV
434 driver, not one of the V4L2 standard formats.</para>
435 </footnote></para></entry>
438 <entry><constant>VIDEO_PALETTE_RGB565</constant></entry>
440 linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_RGB565</constant></link></para></entry>
443 <entry><constant>VIDEO_PALETTE_RGB555</constant></entry>
445 linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_RGB555</constant></link></para></entry>
448 <entry><constant>VIDEO_PALETTE_RGB24</constant></entry>
450 linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR24</constant></link></para></entry>
453 <entry><constant>VIDEO_PALETTE_RGB32</constant></entry>
455 linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR32</constant></link><footnote>
456 <para>Presumably all V4L RGB formats are
457 little-endian, although some drivers might interpret them according to machine endianess. V4L2 defines little-endian, big-endian and red/blue
458 swapped variants. For details see <xref linkend="pixfmt-rgb" />.</para>
459 </footnote></para></entry>
462 <entry><constant>VIDEO_PALETTE_YUV422</constant></entry>
464 linkend="V4L2-PIX-FMT-YUYV"><constant>V4L2_PIX_FMT_YUYV</constant></link></para></entry>
467 <entry><para><constant>VIDEO_PALETTE_YUYV</constant><footnote>
468 <para><constant>VIDEO_PALETTE_YUV422</constant>
469 and <constant>VIDEO_PALETTE_YUYV</constant> are the same formats. Some
470 V4L drivers respond to one, some to the other.</para>
471 </footnote></para></entry>
473 linkend="V4L2-PIX-FMT-YUYV"><constant>V4L2_PIX_FMT_YUYV</constant></link></para></entry>
476 <entry><constant>VIDEO_PALETTE_UYVY</constant></entry>
478 linkend="V4L2-PIX-FMT-UYVY"><constant>V4L2_PIX_FMT_UYVY</constant></link></para></entry>
481 <entry><constant>VIDEO_PALETTE_YUV420</constant></entry>
485 <entry><constant>VIDEO_PALETTE_YUV411</constant></entry>
487 linkend="V4L2-PIX-FMT-Y41P"><constant>V4L2_PIX_FMT_Y41P</constant></link><footnote>
488 <para>Not to be confused with
489 <constant>V4L2_PIX_FMT_YUV411P</constant>, which is a planar
490 format.</para> </footnote></para></entry>
493 <entry><constant>VIDEO_PALETTE_RAW</constant></entry>
494 <entry><para>None<footnote> <para>V4L explains this
495 as: "RAW capture (BT848)"</para> </footnote></para></entry>
498 <entry><constant>VIDEO_PALETTE_YUV422P</constant></entry>
500 linkend="V4L2-PIX-FMT-YUV422P"><constant>V4L2_PIX_FMT_YUV422P</constant></link></para></entry>
503 <entry><constant>VIDEO_PALETTE_YUV411P</constant></entry>
505 linkend="V4L2-PIX-FMT-YUV411P"><constant>V4L2_PIX_FMT_YUV411P</constant></link><footnote>
506 <para>Not to be confused with
507 <constant>V4L2_PIX_FMT_Y41P</constant>, which is a packed
508 format.</para> </footnote></para></entry>
511 <entry><constant>VIDEO_PALETTE_YUV420P</constant></entry>
513 linkend="V4L2-PIX-FMT-YVU420"><constant>V4L2_PIX_FMT_YVU420</constant></link></para></entry>
516 <entry><constant>VIDEO_PALETTE_YUV410P</constant></entry>
518 linkend="V4L2-PIX-FMT-YVU410"><constant>V4L2_PIX_FMT_YVU410</constant></link></para></entry>
522 </informaltable></para>
524 <para>V4L2 image formats are defined in <xref
525 linkend="pixfmt" />. The image format can be selected with the
526 &VIDIOC-S-FMT; ioctl.</para>
532 <para>The <constant>VIDIOCGAUDIO</constant> and
533 <constant>VIDIOCSAUDIO</constant> ioctl and struct
534 <structname>video_audio</structname> are used to enumerate the
535 audio inputs of a V4L device. The equivalent V4L2 ioctls are
536 &VIDIOC-G-AUDIO; and &VIDIOC-S-AUDIO; using &v4l2-audio; as
537 discussed in <xref linkend="audio" />.</para>
539 <para>The <structfield>audio</structfield> "channel number"
540 field counting audio inputs was renamed to
541 <structfield>index</structfield>.</para>
543 <para>On <constant>VIDIOCSAUDIO</constant> the
544 <structfield>mode</structfield> field selects <emphasis>one</emphasis>
545 of the <constant>VIDEO_SOUND_MONO</constant>,
546 <constant>VIDEO_SOUND_STEREO</constant>,
547 <constant>VIDEO_SOUND_LANG1</constant> or
548 <constant>VIDEO_SOUND_LANG2</constant> audio demodulation modes. When
549 the current audio standard is BTSC
550 <constant>VIDEO_SOUND_LANG2</constant> refers to SAP and
551 <constant>VIDEO_SOUND_LANG1</constant> is meaningless. Also
552 undocumented in the V4L specification, there is no way to query the
553 selected mode. On <constant>VIDIOCGAUDIO</constant> the driver returns
554 the <emphasis>actually received</emphasis> audio programmes in this
555 field. In the V4L2 API this information is stored in the &v4l2-tuner;
556 <structfield>rxsubchans</structfield> and
557 <structfield>audmode</structfield> fields, respectively. See <xref
558 linkend="tuner" /> for more information on tuners. Related to audio
559 modes &v4l2-audio; also reports if this is a mono or stereo
560 input, regardless if the source is a tuner.</para>
562 <para>The following fields where replaced by V4L2 controls
563 accessible with the &VIDIOC-QUERYCTRL;, &VIDIOC-G-CTRL; and
564 &VIDIOC-S-CTRL; ioctls:<informaltable>
569 <structname>video_audio</structname></entry>
570 <entry>V4L2 Control ID</entry>
575 <entry><structfield>volume</structfield></entry>
576 <entry><constant>V4L2_CID_AUDIO_VOLUME</constant></entry>
579 <entry><structfield>bass</structfield></entry>
580 <entry><constant>V4L2_CID_AUDIO_BASS</constant></entry>
583 <entry><structfield>treble</structfield></entry>
584 <entry><constant>V4L2_CID_AUDIO_TREBLE</constant></entry>
587 <entry><structfield>balance</structfield></entry>
588 <entry><constant>V4L2_CID_AUDIO_BALANCE</constant></entry>
592 </informaltable></para>
594 <para>To determine which of these controls are supported by a
595 driver V4L provides the <structfield>flags</structfield>
596 <constant>VIDEO_AUDIO_VOLUME</constant>,
597 <constant>VIDEO_AUDIO_BASS</constant>,
598 <constant>VIDEO_AUDIO_TREBLE</constant> and
599 <constant>VIDEO_AUDIO_BALANCE</constant>. In the V4L2 API the
600 &VIDIOC-QUERYCTRL; ioctl reports if the respective control is
601 supported. Accordingly the <constant>VIDEO_AUDIO_MUTABLE</constant>
602 and <constant>VIDEO_AUDIO_MUTE</constant> flags where replaced by the
603 boolean <constant>V4L2_CID_AUDIO_MUTE</constant> control.</para>
605 <para>All V4L2 controls have a <structfield>step</structfield>
606 attribute replacing the struct <structname>video_audio</structname>
607 <structfield>step</structfield> field. The V4L audio controls are
608 assumed to range from 0 to 65535 with no particular reset value. The
609 V4L2 API permits arbitrary limits and defaults which can be queried
610 with the &VIDIOC-QUERYCTRL; ioctl. For general information about
611 controls see <xref linkend="control" />.</para>
615 <title>Frame Buffer Overlay</title>
617 <para>The V4L2 ioctls equivalent to
618 <constant>VIDIOCGFBUF</constant> and <constant>VIDIOCSFBUF</constant>
619 are &VIDIOC-G-FBUF; and &VIDIOC-S-FBUF;. The
620 <structfield>base</structfield> field of struct
621 <structname>video_buffer</structname> remained unchanged, except V4L2
622 defines a flag to indicate non-destructive overlays instead of a
623 <constant>NULL</constant> pointer. All other fields moved into the
624 &v4l2-pix-format; <structfield>fmt</structfield> substructure of
625 &v4l2-framebuffer;. The <structfield>depth</structfield> field was
626 replaced by <structfield>pixelformat</structfield>. See <xref
627 linkend="pixfmt-rgb" /> for a list of RGB formats and their
628 respective color depths.</para>
630 <para>Instead of the special ioctls
631 <constant>VIDIOCGWIN</constant> and <constant>VIDIOCSWIN</constant>
632 V4L2 uses the general-purpose data format negotiation ioctls
633 &VIDIOC-G-FMT; and &VIDIOC-S-FMT;. They take a pointer to a
634 &v4l2-format; as argument. Here the <structfield>win</structfield>
635 member of the <structfield>fmt</structfield> union is used, a
636 &v4l2-window;.</para>
638 <para>The <structfield>x</structfield>,
639 <structfield>y</structfield>, <structfield>width</structfield> and
640 <structfield>height</structfield> fields of struct
641 <structname>video_window</structname> moved into &v4l2-rect;
642 substructure <structfield>w</structfield> of struct
643 <structname>v4l2_window</structname>. The
644 <structfield>chromakey</structfield>,
645 <structfield>clips</structfield>, and
646 <structfield>clipcount</structfield> fields remained unchanged. Struct
647 <structname>video_clip</structname> was renamed to &v4l2-clip;, also
648 containing a struct <structname>v4l2_rect</structname>, but the
649 semantics are still the same.</para>
651 <para>The <constant>VIDEO_WINDOW_INTERLACE</constant> flag was
652 dropped. Instead applications must set the
653 <structfield>field</structfield> field to
654 <constant>V4L2_FIELD_ANY</constant> or
655 <constant>V4L2_FIELD_INTERLACED</constant>. The
656 <constant>VIDEO_WINDOW_CHROMAKEY</constant> flag moved into
657 &v4l2-framebuffer;, under the new name
658 <constant>V4L2_FBUF_FLAG_CHROMAKEY</constant>.</para>
660 <para>In V4L, storing a bitmap pointer in
661 <structfield>clips</structfield> and setting
662 <structfield>clipcount</structfield> to
663 <constant>VIDEO_CLIP_BITMAP</constant> (-1) requests bitmap
664 clipping, using a fixed size bitmap of 1024 × 625 bits. Struct
665 <structname>v4l2_window</structname> has a separate
666 <structfield>bitmap</structfield> pointer field for this purpose and
667 the bitmap size is determined by <structfield>w.width</structfield> and
668 <structfield>w.height</structfield>.</para>
670 <para>The <constant>VIDIOCCAPTURE</constant> ioctl to enable or
671 disable overlay was renamed to &VIDIOC-OVERLAY;.</para>
675 <title>Cropping</title>
677 <para>To capture only a subsection of the full picture V4L
678 defines the <constant>VIDIOCGCAPTURE</constant> and
679 <constant>VIDIOCSCAPTURE</constant> ioctls using struct
680 <structname>video_capture</structname>. The equivalent V4L2 ioctls are
681 &VIDIOC-G-CROP; and &VIDIOC-S-CROP; using &v4l2-crop;, and the related
682 &VIDIOC-CROPCAP; ioctl. This is a rather complex matter, see
683 <xref linkend="crop" /> for details.</para>
685 <para>The <structfield>x</structfield>,
686 <structfield>y</structfield>, <structfield>width</structfield> and
687 <structfield>height</structfield> fields moved into &v4l2-rect;
688 substructure <structfield>c</structfield> of struct
689 <structname>v4l2_crop</structname>. The
690 <structfield>decimation</structfield> field was dropped. In the V4L2
691 API the scaling factor is implied by the size of the cropping
692 rectangle and the size of the captured or overlaid image.</para>
694 <para>The <constant>VIDEO_CAPTURE_ODD</constant>
695 and <constant>VIDEO_CAPTURE_EVEN</constant> flags to capture only the
696 odd or even field, respectively, were replaced by
697 <constant>V4L2_FIELD_TOP</constant> and
698 <constant>V4L2_FIELD_BOTTOM</constant> in the field named
699 <structfield>field</structfield> of &v4l2-pix-format; and
700 &v4l2-window;. These structures are used to select a capture or
701 overlay format with the &VIDIOC-S-FMT; ioctl.</para>
705 <title>Reading Images, Memory Mapping</title>
708 <title>Capturing using the read method</title>
710 <para>There is no essential difference between reading images
711 from a V4L or V4L2 device using the &func-read; function, however V4L2
712 drivers are not required to support this I/O method. Applications can
713 determine if the function is available with the &VIDIOC-QUERYCAP;
714 ioctl. All V4L2 devices exchanging data with applications must support
715 the &func-select; and &func-poll; functions.</para>
717 <para>To select an image format and size, V4L provides the
718 <constant>VIDIOCSPICT</constant> and <constant>VIDIOCSWIN</constant>
719 ioctls. V4L2 uses the general-purpose data format negotiation ioctls
720 &VIDIOC-G-FMT; and &VIDIOC-S-FMT;. They take a pointer to a
721 &v4l2-format; as argument, here the &v4l2-pix-format; named
722 <structfield>pix</structfield> of its <structfield>fmt</structfield>
723 union is used.</para>
725 <para>For more information about the V4L2 read interface see
726 <xref linkend="rw" />.</para>
729 <title>Capturing using memory mapping</title>
731 <para>Applications can read from V4L devices by mapping
732 buffers in device memory, or more often just buffers allocated in
733 DMA-able system memory, into their address space. This avoids the data
734 copying overhead of the read method. V4L2 supports memory mapping as
735 well, with a few differences.</para>
748 <entry>The image format must be selected before
749 buffers are allocated, with the &VIDIOC-S-FMT; ioctl. When no format
750 is selected the driver may use the last, possibly by another
751 application requested format.</entry>
754 <entry><para>Applications cannot change the number of
755 buffers. The it is built into the driver, unless it has a module
756 option to change the number when the driver module is
757 loaded.</para></entry>
758 <entry><para>The &VIDIOC-REQBUFS; ioctl allocates the
759 desired number of buffers, this is a required step in the initialization
760 sequence.</para></entry>
763 <entry><para>Drivers map all buffers as one contiguous
764 range of memory. The <constant>VIDIOCGMBUF</constant> ioctl is
765 available to query the number of buffers, the offset of each buffer
766 from the start of the virtual file, and the overall amount of memory
767 used, which can be used as arguments for the &func-mmap;
768 function.</para></entry>
769 <entry><para>Buffers are individually mapped. The
770 offset and size of each buffer can be determined with the
771 &VIDIOC-QUERYBUF; ioctl.</para></entry>
774 <entry><para>The <constant>VIDIOCMCAPTURE</constant>
775 ioctl prepares a buffer for capturing. It also determines the image
776 format for this buffer. The ioctl returns immediately, eventually with
777 an &EAGAIN; if no video signal had been detected. When the driver
778 supports more than one buffer applications can call the ioctl multiple
779 times and thus have multiple outstanding capture
780 requests.</para><para>The <constant>VIDIOCSYNC</constant> ioctl
781 suspends execution until a particular buffer has been
782 filled.</para></entry>
783 <entry><para>Drivers maintain an incoming and outgoing
784 queue. &VIDIOC-QBUF; enqueues any empty buffer into the incoming
785 queue. Filled buffers are dequeued from the outgoing queue with the
786 &VIDIOC-DQBUF; ioctl. To wait until filled buffers become available this
787 function, &func-select; or &func-poll; can be used. The
788 &VIDIOC-STREAMON; ioctl must be called once after enqueuing one or
789 more buffers to start capturing. Its counterpart
790 &VIDIOC-STREAMOFF; stops capturing and dequeues all buffers from both
791 queues. Applications can query the signal status, if known, with the
792 &VIDIOC-ENUMINPUT; ioctl.</para></entry>
798 <para>For a more in-depth discussion of memory mapping and
799 examples, see <xref linkend="mmap" />.</para>
804 <title>Reading Raw VBI Data</title>
806 <para>Originally the V4L API did not specify a raw VBI capture
807 interface, only the device file <filename>/dev/vbi</filename> was
808 reserved for this purpose. The only driver supporting this interface
809 was the BTTV driver, de-facto defining the V4L VBI interface. Reading
810 from the device yields a raw VBI image with the following
811 parameters:<informaltable>
815 <entry>&v4l2-vbi-format;</entry>
816 <entry>V4L, BTTV driver</entry>
821 <entry>sampling_rate</entry>
822 <entry>28636363 Hz NTSC (or any other 525-line
823 standard); 35468950 Hz PAL and SECAM (625-line standards)</entry>
826 <entry>offset</entry>
830 <entry>samples_per_line</entry>
834 <entry>sample_format</entry>
835 <entry>V4L2_PIX_FMT_GREY. The last four bytes (a
836 machine endianess integer) contain a frame counter.</entry>
839 <entry>start[]</entry>
840 <entry>10, 273 NTSC; 22, 335 PAL and SECAM</entry>
843 <entry>count[]</entry>
844 <entry><para>16, 16<footnote><para>Old driver
845 versions used different values, eventually the custom
846 <constant>BTTV_VBISIZE</constant> ioctl was added to query the
847 correct values.</para></footnote></para></entry>
855 </informaltable></para>
857 <para>Undocumented in the V4L specification, in Linux 2.3 the
858 <constant>VIDIOCGVBIFMT</constant> and
859 <constant>VIDIOCSVBIFMT</constant> ioctls using struct
860 <structname>vbi_format</structname> were added to determine the VBI
861 image parameters. These ioctls are only partially compatible with the
862 V4L2 VBI interface specified in <xref linkend="raw-vbi" />.</para>
864 <para>An <structfield>offset</structfield> field does not
865 exist, <structfield>sample_format</structfield> is supposed to be
866 <constant>VIDEO_PALETTE_RAW</constant>, equivalent to
867 <constant>V4L2_PIX_FMT_GREY</constant>. The remaining fields are
868 probably equivalent to &v4l2-vbi-format;.</para>
870 <para>Apparently only the Zoran (ZR 36120) driver implements
871 these ioctls. The semantics differ from those specified for V4L2 in two
872 ways. The parameters are reset on &func-open; and
873 <constant>VIDIOCSVBIFMT</constant> always returns an &EINVAL; if the
874 parameters are invalid.</para>
878 <title>Miscellaneous</title>
880 <para>V4L2 has no equivalent of the
881 <constant>VIDIOCGUNIT</constant> ioctl. Applications can find the VBI
882 device associated with a video capture device (or vice versa) by
883 reopening the device and requesting VBI data. For details see
884 <xref linkend="open" />.</para>
886 <para>No replacement exists for <constant>VIDIOCKEY</constant>,
887 and the V4L functions for microcode programming. A new interface for
888 MPEG compression and playback devices is documented in <xref
889 linkend="extended-controls" />.</para>
894 <section id="hist-v4l2">
895 <title>Changes of the V4L2 API</title>
897 <para>Soon after the V4L API was added to the kernel it was
898 criticised as too inflexible. In August 1998 Bill Dirks proposed a
899 number of improvements and began to work on documentation, example
900 drivers and applications. With the help of other volunteers this
901 eventually became the V4L2 API, not just an extension but a
902 replacement for the V4L API. However it took another four years and
903 two stable kernel releases until the new API was finally accepted for
904 inclusion into the kernel in its present form.</para>
907 <title>Early Versions</title>
908 <para>1998-08-20: First version.</para>
910 <para>1998-08-27: The &func-select; function was introduced.</para>
912 <para>1998-09-10: New video standard interface.</para>
914 <para>1998-09-18: The <constant>VIDIOC_NONCAP</constant> ioctl
915 was replaced by the otherwise meaningless <constant>O_TRUNC</constant>
916 &func-open; flag, and the aliases <constant>O_NONCAP</constant> and
917 <constant>O_NOIO</constant> were defined. Applications can set this
918 flag if they intend to access controls only, as opposed to capture
919 applications which need exclusive access. The
920 <constant>VIDEO_STD_XXX</constant> identifiers are now ordinals
921 instead of flags, and the <function>video_std_construct()</function>
922 helper function takes id and transmission arguments.</para>
924 <para>1998-09-28: Revamped video standard. Made video controls
925 individually enumerable.</para>
927 <para>1998-10-02: The <structfield>id</structfield> field was
928 removed from struct <structname>video_standard</structname> and the
929 color subcarrier fields were renamed. The &VIDIOC-QUERYSTD; ioctl was
930 renamed to &VIDIOC-ENUMSTD;, &VIDIOC-G-INPUT; to &VIDIOC-ENUMINPUT;. A
931 first draft of the Codec API was released.</para>
933 <para>1998-11-08: Many minor changes. Most symbols have been
934 renamed. Some material changes to &v4l2-capability;.</para>
936 <para>1998-11-12: The read/write directon of some ioctls was misdefined.</para>
938 <para>1998-11-14: <constant>V4L2_PIX_FMT_RGB24</constant>
939 changed to <constant>V4L2_PIX_FMT_BGR24</constant>, and
940 <constant>V4L2_PIX_FMT_RGB32</constant> changed to
941 <constant>V4L2_PIX_FMT_BGR32</constant>. Audio controls are now
942 accessible with the &VIDIOC-G-CTRL; and &VIDIOC-S-CTRL; ioctls under
943 names starting with <constant>V4L2_CID_AUDIO</constant>. The
944 <constant>V4L2_MAJOR</constant> define was removed from
945 <filename>videodev.h</filename> since it was only used once in the
946 <filename>videodev</filename> kernel module. The
947 <constant>YUV422</constant> and <constant>YUV411</constant> planar
948 image formats were added.</para>
950 <para>1998-11-28: A few ioctl symbols changed. Interfaces for codecs and
951 video output devices were added.</para>
953 <para>1999-01-14: A raw VBI capture interface was added.</para>
955 <para>1999-01-19: The <constant>VIDIOC_NEXTBUF</constant> ioctl
960 <title>V4L2 Version 0.16 1999-01-31</title>
961 <para>1999-01-27: There is now one QBUF ioctl, VIDIOC_QWBUF and VIDIOC_QRBUF
962 are gone. VIDIOC_QBUF takes a v4l2_buffer as a parameter. Added
963 digital zoom (cropping) controls.</para>
966 <!-- Where's 0.17? mhs couldn't find that videodev.h, perhaps Bill
967 forgot to bump the version number or never released it. -->
970 <title>V4L2 Version 0.18 1999-03-16</title>
971 <para>Added a v4l to V4L2 ioctl compatibility layer to
972 videodev.c. Driver writers, this changes how you implement your ioctl
973 handler. See the Driver Writer's Guide. Added some more control id
978 <title>V4L2 Version 0.19 1999-06-05</title>
979 <para>1999-03-18: Fill in the category and catname fields of
980 v4l2_queryctrl objects before passing them to the driver. Required a
981 minor change to the VIDIOC_QUERYCTRL handlers in the sample
983 <para>1999-03-31: Better compatibility for v4l memory capture
984 ioctls. Requires changes to drivers to fully support new compatibility
985 features, see Driver Writer's Guide and v4l2cap.c. Added new control
986 IDs: V4L2_CID_HFLIP, _VFLIP. Changed V4L2_PIX_FMT_YUV422P to _YUV422P,
987 and _YUV411P to _YUV411P.</para>
988 <para>1999-04-04: Added a few more control IDs.</para>
989 <para>1999-04-07: Added the button control type.</para>
990 <para>1999-05-02: Fixed a typo in videodev.h, and added the
991 V4L2_CTRL_FLAG_GRAYED (later V4L2_CTRL_FLAG_GRABBED) flag.</para>
992 <para>1999-05-20: Definition of VIDIOC_G_CTRL was wrong causing
993 a malfunction of this ioctl.</para>
994 <para>1999-06-05: Changed the value of
995 V4L2_CID_WHITENESS.</para>
999 <title>V4L2 Version 0.20 (1999-09-10)</title>
1001 <para>Version 0.20 introduced a number of changes which were
1002 <emphasis>not backward compatible</emphasis> with 0.19 and earlier
1003 versions. Purpose of these changes was to simplify the API, while
1004 making it more extensible and following common Linux driver API
1009 <para>Some typos in <constant>V4L2_FMT_FLAG</constant>
1010 symbols were fixed. &v4l2-clip; was changed for compatibility with
1011 v4l. (1999-08-30)</para>
1015 <para><constant>V4L2_TUNER_SUB_LANG1</constant> was added.
1020 <para>All ioctl() commands that used an integer argument now
1021 take a pointer to an integer. Where it makes sense, ioctls will return
1022 the actual new value in the integer pointed to by the argument, a
1023 common convention in the V4L2 API. The affected ioctls are:
1024 VIDIOC_PREVIEW, VIDIOC_STREAMON, VIDIOC_STREAMOFF, VIDIOC_S_FREQ,
1025 VIDIOC_S_INPUT, VIDIOC_S_OUTPUT, VIDIOC_S_EFFECT. For example
1027 err = ioctl (fd, VIDIOC_XXX, V4L2_XXX);
1028 </programlisting> becomes <programlisting>
1029 int a = V4L2_XXX; err = ioctl(fd, VIDIOC_XXX, &a);
1035 <para>All the different get- and set-format commands were
1036 swept into one &VIDIOC-G-FMT; and &VIDIOC-S-FMT; ioctl taking a union
1037 and a type field selecting the union member as parameter. Purpose is to
1038 simplify the API by eliminating several ioctls and to allow new and
1039 driver private data streams without adding new ioctls.</para>
1041 <para>This change obsoletes the following ioctls:
1042 <constant>VIDIOC_S_INFMT</constant>,
1043 <constant>VIDIOC_G_INFMT</constant>,
1044 <constant>VIDIOC_S_OUTFMT</constant>,
1045 <constant>VIDIOC_G_OUTFMT</constant>,
1046 <constant>VIDIOC_S_VBIFMT</constant> and
1047 <constant>VIDIOC_G_VBIFMT</constant>. The image format structure
1048 <structname>v4l2_format</structname> was renamed to &v4l2-pix-format;,
1049 while &v4l2-format; is now the envelopping structure for all format
1050 negotiations.</para>
1054 <para>Similar to the changes above, the
1055 <constant>VIDIOC_G_PARM</constant> and
1056 <constant>VIDIOC_S_PARM</constant> ioctls were merged with
1057 <constant>VIDIOC_G_OUTPARM</constant> and
1058 <constant>VIDIOC_S_OUTPARM</constant>. A
1059 <structfield>type</structfield> field in the new &v4l2-streamparm;
1060 selects the respective union member.</para>
1062 <para>This change obsoletes the
1063 <constant>VIDIOC_G_OUTPARM</constant> and
1064 <constant>VIDIOC_S_OUTPARM</constant> ioctls.</para>
1068 <para>Control enumeration was simplified, and two new
1069 control flags were introduced and one dropped. The
1070 <structfield>catname</structfield> field was replaced by a
1071 <structfield>group</structfield> field.</para>
1073 <para>Drivers can now flag unsupported and temporarily
1074 unavailable controls with <constant>V4L2_CTRL_FLAG_DISABLED</constant>
1075 and <constant>V4L2_CTRL_FLAG_GRABBED</constant> respectively. The
1076 <structfield>group</structfield> name indicates a possibly narrower
1077 classification than the <structfield>category</structfield>. In other
1078 words, there may be multiple groups within a category. Controls within
1079 a group would typically be drawn within a group box. Controls in
1080 different categories might have a greater separation, or may even
1081 appear in separate windows.</para>
1085 <para>The &v4l2-buffer; <structfield>timestamp</structfield>
1086 was changed to a 64 bit integer, containing the sampling or output
1087 time of the frame in nanoseconds. Additionally timestamps will be in
1088 absolute system time, not starting from zero at the beginning of a
1089 stream. The data type name for timestamps is stamp_t, defined as a
1090 signed 64-bit integer. Output devices should not send a buffer out
1091 until the time in the timestamp field has arrived. I would like to
1092 follow SGI's lead, and adopt a multimedia timestamping system like
1093 their UST (Unadjusted System Time). See
1094 http://reality.sgi.com/cpirazzi_engr/lg/time/intro.html. [This link is
1095 no longer valid.] UST uses timestamps that are 64-bit signed integers
1096 (not struct timeval's) and given in nanosecond units. The UST clock
1097 starts at zero when the system is booted and runs continuously and
1098 uniformly. It takes a little over 292 years for UST to overflow. There
1099 is no way to set the UST clock. The regular Linux time-of-day clock
1100 can be changed periodically, which would cause errors if it were being
1101 used for timestamping a multimedia stream. A real UST style clock will
1102 require some support in the kernel that is not there yet. But in
1103 anticipation, I will change the timestamp field to a 64-bit integer,
1104 and I will change the v4l2_masterclock_gettime() function (used only
1105 by drivers) to return a 64-bit integer.</para>
1109 <para>A <structfield>sequence</structfield> field was added
1110 to &v4l2-buffer;. The <structfield>sequence</structfield> field counts
1111 captured frames, it is ignored by output devices. When a capture
1112 driver drops a frame, the sequence number of that frame is
1119 <title>V4L2 Version 0.20 incremental changes</title>
1120 <!-- Version number didn't change anymore, reason unknown. -->
1122 <para>1999-12-23: In &v4l2-vbi-format; the
1123 <structfield>reserved1</structfield> field became
1124 <structfield>offset</structfield>. Previously drivers were required to
1125 clear the <structfield>reserved1</structfield> field.</para>
1127 <para>2000-01-13: The
1128 <constant>V4L2_FMT_FLAG_NOT_INTERLACED</constant> flag was added.</para>
1130 <para>2000-07-31: The <filename>linux/poll.h</filename> header
1131 is now included by <filename>videodev.h</filename> for compatibility
1132 with the original <filename>videodev.h</filename> file.</para>
1134 <para>2000-11-20: <constant>V4L2_TYPE_VBI_OUTPUT</constant> and
1135 <constant>V4L2_PIX_FMT_Y41P</constant> were added.</para>
1137 <para>2000-11-25: <constant>V4L2_TYPE_VBI_INPUT</constant> was
1140 <para>2000-12-04: A couple typos in symbol names were fixed.</para>
1142 <para>2001-01-18: To avoid namespace conflicts the
1143 <constant>fourcc</constant> macro defined in the
1144 <filename>videodev.h</filename> header file was renamed to
1145 <constant>v4l2_fourcc</constant>.</para>
1147 <para>2001-01-25: A possible driver-level compatibility problem
1148 between the <filename>videodev.h</filename> file in Linux 2.4.0 and
1149 the <filename>videodev.h</filename> file included in the
1150 <filename>videodevX</filename> patch was fixed. Users of an earlier
1151 version of <filename>videodevX</filename> on Linux 2.4.0 should
1152 recompile their V4L and V4L2 drivers.</para>
1154 <para>2001-01-26: A possible kernel-level incompatibility
1155 between the <filename>videodev.h</filename> file in the
1156 <filename>videodevX</filename> patch and the
1157 <filename>videodev.h</filename> file in Linux 2.2.x with devfs patches
1158 applied was fixed.</para>
1160 <para>2001-03-02: Certain V4L ioctls which pass data in both
1161 direction although they are defined with read-only parameter, did not
1162 work correctly through the backward compatibility layer.
1165 <para>2001-04-13: Big endian 16-bit RGB formats were added.</para>
1167 <para>2001-09-17: New YUV formats and the &VIDIOC-G-FREQUENCY; and
1168 &VIDIOC-S-FREQUENCY; ioctls were added. (The old
1169 <constant>VIDIOC_G_FREQ</constant> and
1170 <constant>VIDIOC_S_FREQ</constant> ioctls did not take multiple tuners
1171 into account.)</para>
1173 <para>2000-09-18: <constant>V4L2_BUF_TYPE_VBI</constant> was
1174 added. This may <emphasis>break compatibility</emphasis> as the
1175 &VIDIOC-G-FMT; and &VIDIOC-S-FMT; ioctls may fail now if the struct
1176 <structname>v4l2_fmt</structname> <structfield>type</structfield>
1177 field does not contain <constant>V4L2_BUF_TYPE_VBI</constant>. In the
1178 documentation of the &v4l2-vbi-format;
1179 <structfield>offset</structfield> field the ambiguous phrase "rising
1180 edge" was changed to "leading edge".</para>
1184 <title>V4L2 Version 0.20 2000-11-23</title>
1186 <para>A number of changes were made to the raw VBI
1191 <para>Figures clarifying the line numbering scheme were
1192 added to the V4L2 API specification. The
1193 <structfield>start</structfield>[0] and
1194 <structfield>start</structfield>[1] fields no longer count line
1195 numbers beginning at zero. Rationale: a) The previous definition was
1196 unclear. b) The <structfield>start</structfield>[] values are ordinal
1197 numbers. c) There is no point in inventing a new line numbering
1198 scheme. We now use line number as defined by ITU-R, period.
1199 Compatibility: Add one to the start values. Applications depending on
1200 the previous semantics may not function correctly.</para>
1204 <para>The restriction "count[0] > 0 and count[1] > 0"
1205 has been relaxed to "(count[0] + count[1]) > 0". Rationale:
1206 Drivers may allocate resources at scan line granularity and some data
1207 services are transmitted only on the first field. The comment that
1208 both <structfield>count</structfield> values will usually be equal is
1209 misleading and pointless and has been removed. This change
1210 <emphasis>breaks compatibility</emphasis> with earlier versions:
1211 Drivers may return EINVAL, applications may not function
1216 <para>Drivers are again permitted to return negative
1217 (unknown) start values as proposed earlier. Why this feature was
1218 dropped is unclear. This change may <emphasis>break
1219 compatibility</emphasis> with applications depending on the start
1220 values being positive. The use of <constant>EBUSY</constant> and
1221 <constant>EINVAL</constant> error codes with the &VIDIOC-S-FMT; ioctl
1222 was clarified. The &EBUSY; was finally documented, and the
1223 <structfield>reserved2</structfield> field which was previously
1224 mentioned only in the <filename>videodev.h</filename> header
1229 <para>New buffer types
1230 <constant>V4L2_TYPE_VBI_INPUT</constant> and
1231 <constant>V4L2_TYPE_VBI_OUTPUT</constant> were added. The former is an
1232 alias for the old <constant>V4L2_TYPE_VBI</constant>, the latter was
1233 missing in the <filename>videodev.h</filename> file.</para>
1239 <title>V4L2 Version 0.20 2002-07-25</title>
1240 <para>Added sliced VBI interface proposal.</para>
1244 <title>V4L2 in Linux 2.5.46, 2002-10</title>
1246 <para>Around October-November 2002, prior to an announced
1247 feature freeze of Linux 2.5, the API was revised, drawing from
1248 experience with V4L2 0.20. This unnamed version was finally merged
1249 into Linux 2.5.46.</para>
1253 <para>As specified in <xref linkend="related" />, drivers
1254 must make related device functions available under all minor device
1259 <para>The &func-open; function requires access mode
1260 <constant>O_RDWR</constant> regardless of the device type. All V4L2
1261 drivers exchanging data with applications must support the
1262 <constant>O_NONBLOCK</constant> flag. The <constant>O_NOIO</constant>
1263 flag, a V4L2 symbol which aliased the meaningless
1264 <constant>O_TRUNC</constant> to indicate accesses without data
1265 exchange (panel applications) was dropped. Drivers must stay in "panel
1266 mode" until the application attempts to initiate a data exchange, see
1267 <xref linkend="open" />.</para>
1271 <para>The &v4l2-capability; changed dramatically. Note that
1272 also the size of the structure changed, which is encoded in the ioctl
1273 request code, thus older V4L2 devices will respond with an &EINVAL; to
1274 the new &VIDIOC-QUERYCAP; ioctl.</para>
1276 <para>There are new fields to identify the driver, a new RDS
1277 device function <constant>V4L2_CAP_RDS_CAPTURE</constant>, the
1278 <constant>V4L2_CAP_AUDIO</constant> flag indicates if the device has
1279 any audio connectors, another I/O capability
1280 <constant>V4L2_CAP_ASYNCIO</constant> can be flagged. In response to
1281 these changes the <structfield>type</structfield> field became a bit
1282 set and was merged into the <structfield>flags</structfield> field.
1283 <constant>V4L2_FLAG_TUNER</constant> was renamed to
1284 <constant>V4L2_CAP_TUNER</constant>,
1285 <constant>V4L2_CAP_VIDEO_OVERLAY</constant> replaced
1286 <constant>V4L2_FLAG_PREVIEW</constant> and
1287 <constant>V4L2_CAP_VBI_CAPTURE</constant> and
1288 <constant>V4L2_CAP_VBI_OUTPUT</constant> replaced
1289 <constant>V4L2_FLAG_DATA_SERVICE</constant>.
1290 <constant>V4L2_FLAG_READ</constant> and
1291 <constant>V4L2_FLAG_WRITE</constant> were merged into
1292 <constant>V4L2_CAP_READWRITE</constant>.</para>
1294 <para>The redundant fields
1295 <structfield>inputs</structfield>, <structfield>outputs</structfield>
1296 and <structfield>audios</structfield> were removed. These properties
1297 can be determined as described in <xref linkend="video" /> and <xref
1298 linkend="audio" />.</para>
1300 <para>The somewhat volatile and therefore barely useful
1301 fields <structfield>maxwidth</structfield>,
1302 <structfield>maxheight</structfield>,
1303 <structfield>minwidth</structfield>,
1304 <structfield>minheight</structfield>,
1305 <structfield>maxframerate</structfield> were removed. This information
1306 is available as described in <xref linkend="format" /> and
1307 <xref linkend="standard" />.</para>
1309 <para><constant>V4L2_FLAG_SELECT</constant> was removed. We
1310 believe the select() function is important enough to require support
1311 of it in all V4L2 drivers exchanging data with applications. The
1312 redundant <constant>V4L2_FLAG_MONOCHROME</constant> flag was removed,
1313 this information is available as described in <xref
1314 linkend="format" />.</para>
1318 <para>In &v4l2-input; the
1319 <structfield>assoc_audio</structfield> field and the
1320 <structfield>capability</structfield> field and its only flag
1321 <constant>V4L2_INPUT_CAP_AUDIO</constant> was replaced by the new
1322 <structfield>audioset</structfield> field. Instead of linking one
1323 video input to one audio input this field reports all audio inputs
1324 this video input combines with.</para>
1326 <para>New fields are <structfield>tuner</structfield>
1327 (reversing the former link from tuners to video inputs),
1328 <structfield>std</structfield> and
1329 <structfield>status</structfield>.</para>
1331 <para>Accordingly &v4l2-output; lost its
1332 <structfield>capability</structfield> and
1333 <structfield>assoc_audio</structfield> fields.
1334 <structfield>audioset</structfield>,
1335 <structfield>modulator</structfield> and
1336 <structfield>std</structfield> where added instead.</para>
1340 <para>The &v4l2-audio; field
1341 <structfield>audio</structfield> was renamed to
1342 <structfield>index</structfield>, for consistency with other
1343 structures. A new capability flag
1344 <constant>V4L2_AUDCAP_STEREO</constant> was added to indicated if the
1345 audio input in question supports stereo sound.
1346 <constant>V4L2_AUDCAP_EFFECTS</constant> and the corresponding
1347 <constant>V4L2_AUDMODE</constant> flags where removed. This can be
1348 easily implemented using controls. (However the same applies to AVL
1349 which is still there.)</para>
1351 <para>Again for consistency the &v4l2-audioout; field
1352 <structfield>audio</structfield> was renamed to
1353 <structfield>index</structfield>.</para>
1357 <para>The &v4l2-tuner;
1358 <structfield>input</structfield> field was replaced by an
1359 <structfield>index</structfield> field, permitting devices with
1360 multiple tuners. The link between video inputs and tuners is now
1361 reversed, inputs point to their tuner. The
1362 <structfield>std</structfield> substructure became a
1363 simple set (more about this below) and moved into &v4l2-input;. A
1364 <structfield>type</structfield> field was added.</para>
1366 <para>Accordingly in &v4l2-modulator; the
1367 <structfield>output</structfield> was replaced by an
1368 <structfield>index</structfield> field.</para>
1370 <para>In &v4l2-frequency; the
1371 <structfield>port</structfield> field was replaced by a
1372 <structfield>tuner</structfield> field containing the respective tuner
1373 or modulator index number. A tuner <structfield>type</structfield>
1374 field was added and the <structfield>reserved</structfield> field
1375 became larger for future extensions (satellite tuners in
1380 <para>The idea of completely transparent video standards was
1381 dropped. Experience showed that applications must be able to work with
1382 video standards beyond presenting the user a menu. Instead of
1383 enumerating supported standards with an ioctl applications can now
1384 refer to standards by &v4l2-std-id; and symbols defined in the
1385 <filename>videodev2.h</filename> header file. For details see <xref
1386 linkend="standard" />. The &VIDIOC-G-STD; and
1387 &VIDIOC-S-STD; now take a pointer to this type as argument.
1388 &VIDIOC-QUERYSTD; was added to autodetect the received standard, if
1389 the hardware has this capability. In &v4l2-standard; an
1390 <structfield>index</structfield> field was added for &VIDIOC-ENUMSTD;.
1391 A &v4l2-std-id; field named <structfield>id</structfield> was added as
1392 machine readable identifier, also replacing the
1393 <structfield>transmission</structfield> field. The misleading
1394 <structfield>framerate</structfield> field was renamed
1395 to <structfield>frameperiod</structfield>. The now obsolete
1396 <structfield>colorstandard</structfield> information, originally
1397 needed to distguish between variations of standards, were
1400 <para>Struct <structname>v4l2_enumstd</structname> ceased to
1401 be. &VIDIOC-ENUMSTD; now takes a pointer to a &v4l2-standard;
1402 directly. The information which standards are supported by a
1403 particular video input or output moved into &v4l2-input; and
1404 &v4l2-output; fields named <structfield>std</structfield>,
1405 respectively.</para>
1409 <para>The &v4l2-queryctrl; fields
1410 <structfield>category</structfield> and
1411 <structfield>group</structfield> did not catch on and/or were not
1412 implemented as expected and therefore removed.</para>
1416 <para>The &VIDIOC-TRY-FMT; ioctl was added to negotiate data
1417 formats as with &VIDIOC-S-FMT;, but without the overhead of
1418 programming the hardware and regardless of I/O in progress.</para>
1420 <para>In &v4l2-format; the <structfield>fmt</structfield>
1421 union was extended to contain &v4l2-window;. All image format
1422 negotiations are now possible with <constant>VIDIOC_G_FMT</constant>,
1423 <constant>VIDIOC_S_FMT</constant> and
1424 <constant>VIDIOC_TRY_FMT</constant>; ioctl. The
1425 <constant>VIDIOC_G_WIN</constant> and
1426 <constant>VIDIOC_S_WIN</constant> ioctls to prepare for a video
1427 overlay were removed. The <structfield>type</structfield> field
1428 changed to type &v4l2-buf-type; and the buffer type names changed as
1429 follows.<informaltable>
1433 <entry>Old defines</entry>
1434 <entry>&v4l2-buf-type;</entry>
1437 <tbody valign="top">
1439 <entry><constant>V4L2_BUF_TYPE_CAPTURE</constant></entry>
1440 <entry><constant>V4L2_BUF_TYPE_VIDEO_CAPTURE</constant></entry>
1443 <entry><constant>V4L2_BUF_TYPE_CODECIN</constant></entry>
1444 <entry>Omitted for now</entry>
1447 <entry><constant>V4L2_BUF_TYPE_CODECOUT</constant></entry>
1448 <entry>Omitted for now</entry>
1451 <entry><constant>V4L2_BUF_TYPE_EFFECTSIN</constant></entry>
1452 <entry>Omitted for now</entry>
1455 <entry><constant>V4L2_BUF_TYPE_EFFECTSIN2</constant></entry>
1456 <entry>Omitted for now</entry>
1459 <entry><constant>V4L2_BUF_TYPE_EFFECTSOUT</constant></entry>
1460 <entry>Omitted for now</entry>
1463 <entry><constant>V4L2_BUF_TYPE_VIDEOOUT</constant></entry>
1464 <entry><constant>V4L2_BUF_TYPE_VIDEO_OUTPUT</constant></entry>
1467 <entry><constant>-</constant></entry>
1468 <entry><constant>V4L2_BUF_TYPE_VIDEO_OVERLAY</constant></entry>
1471 <entry><constant>-</constant></entry>
1472 <entry><constant>V4L2_BUF_TYPE_VBI_CAPTURE</constant></entry>
1475 <entry><constant>-</constant></entry>
1476 <entry><constant>V4L2_BUF_TYPE_VBI_OUTPUT</constant></entry>
1479 <entry><constant>-</constant></entry>
1480 <entry><constant>V4L2_BUF_TYPE_SLICED_VBI_CAPTURE</constant></entry>
1483 <entry><constant>-</constant></entry>
1484 <entry><constant>V4L2_BUF_TYPE_SLICED_VBI_OUTPUT</constant></entry>
1487 <entry><constant>V4L2_BUF_TYPE_PRIVATE_BASE</constant></entry>
1488 <entry><constant>V4L2_BUF_TYPE_PRIVATE</constant></entry>
1492 </informaltable></para>
1496 <para>In &v4l2-fmtdesc; a &v4l2-buf-type; field named
1497 <structfield>type</structfield> was added as in &v4l2-format;. The
1498 <constant>VIDIOC_ENUM_FBUFFMT</constant> ioctl is no longer needed and
1499 was removed. These calls can be replaced by &VIDIOC-ENUM-FMT; with
1500 type <constant>V4L2_BUF_TYPE_VIDEO_OVERLAY</constant>.</para>
1504 <para>In &v4l2-pix-format; the
1505 <structfield>depth</structfield> field was removed, assuming
1506 applications which recognize the format by its four-character-code
1507 already know the color depth, and others do not care about it. The
1508 same rationale lead to the removal of the
1509 <constant>V4L2_FMT_FLAG_COMPRESSED</constant> flag. The
1510 <constant>V4L2_FMT_FLAG_SWCONVECOMPRESSED</constant> flag was removed
1511 because drivers are not supposed to convert images in kernel space. A
1512 user library of conversion functions should be provided instead. The
1513 <constant>V4L2_FMT_FLAG_BYTESPERLINE</constant> flag was redundant.
1514 Applications can set the <structfield>bytesperline</structfield> field
1515 to zero to get a reasonable default. Since the remaining flags were
1516 replaced as well, the <structfield>flags</structfield> field itself
1518 <para>The interlace flags were replaced by a &v4l2-field;
1519 value in a newly added <structfield>field</structfield>
1520 field.<informaltable>
1524 <entry>Old flag</entry>
1525 <entry>&v4l2-field;</entry>
1528 <tbody valign="top">
1530 <entry><constant>V4L2_FMT_FLAG_NOT_INTERLACED</constant></entry>
1534 <entry><constant>V4L2_FMT_FLAG_INTERLACED</constant>
1535 = <constant>V4L2_FMT_FLAG_COMBINED</constant></entry>
1536 <entry><constant>V4L2_FIELD_INTERLACED</constant></entry>
1539 <entry><constant>V4L2_FMT_FLAG_TOPFIELD</constant>
1540 = <constant>V4L2_FMT_FLAG_ODDFIELD</constant></entry>
1541 <entry><constant>V4L2_FIELD_TOP</constant></entry>
1544 <entry><constant>V4L2_FMT_FLAG_BOTFIELD</constant>
1545 = <constant>V4L2_FMT_FLAG_EVENFIELD</constant></entry>
1546 <entry><constant>V4L2_FIELD_BOTTOM</constant></entry>
1549 <entry><constant>-</constant></entry>
1550 <entry><constant>V4L2_FIELD_SEQ_TB</constant></entry>
1553 <entry><constant>-</constant></entry>
1554 <entry><constant>V4L2_FIELD_SEQ_BT</constant></entry>
1557 <entry><constant>-</constant></entry>
1558 <entry><constant>V4L2_FIELD_ALTERNATE</constant></entry>
1562 </informaltable></para>
1564 <para>The color space flags were replaced by a
1565 &v4l2-colorspace; value in a newly added
1566 <structfield>colorspace</structfield> field, where one of
1567 <constant>V4L2_COLORSPACE_SMPTE170M</constant>,
1568 <constant>V4L2_COLORSPACE_BT878</constant>,
1569 <constant>V4L2_COLORSPACE_470_SYSTEM_M</constant> or
1570 <constant>V4L2_COLORSPACE_470_SYSTEM_BG</constant> replaces
1571 <constant>V4L2_FMT_CS_601YUV</constant>.</para>
1575 <para>In &v4l2-requestbuffers; the
1576 <structfield>type</structfield> field was properly defined as
1577 &v4l2-buf-type;. Buffer types changed as mentioned above. A new
1578 <structfield>memory</structfield> field of type &v4l2-memory; was
1579 added to distinguish between I/O methods using buffers allocated
1580 by the driver or the application. See <xref linkend="io" /> for
1585 <para>In &v4l2-buffer; the <structfield>type</structfield>
1586 field was properly defined as &v4l2-buf-type;. Buffer types changed as
1587 mentioned above. A <structfield>field</structfield> field of type
1588 &v4l2-field; was added to indicate if a buffer contains a top or
1589 bottom field. The old field flags were removed. Since no unadjusted
1590 system time clock was added to the kernel as planned, the
1591 <structfield>timestamp</structfield> field changed back from type
1592 stamp_t, an unsigned 64 bit integer expressing the sample time in
1593 nanoseconds, to struct <structname>timeval</structname>. With the
1594 addition of a second memory mapping method the
1595 <structfield>offset</structfield> field moved into union
1596 <structfield>m</structfield>, and a new
1597 <structfield>memory</structfield> field of type &v4l2-memory; was
1598 added to distinguish between I/O methods. See <xref linkend="io" />
1601 <para>The <constant>V4L2_BUF_REQ_CONTIG</constant>
1602 flag was used by the V4L compatibility layer, after changes to this
1603 code it was no longer needed. The
1604 <constant>V4L2_BUF_ATTR_DEVICEMEM</constant> flag would indicate if
1605 the buffer was indeed allocated in device memory rather than DMA-able
1606 system memory. It was barely useful and so was removed.</para>
1610 <para>In &v4l2-framebuffer; the
1611 <structfield>base[3]</structfield> array anticipating double- and
1612 triple-buffering in off-screen video memory, however without defining
1613 a synchronization mechanism, was replaced by a single pointer. The
1614 <constant>V4L2_FBUF_CAP_SCALEUP</constant> and
1615 <constant>V4L2_FBUF_CAP_SCALEDOWN</constant> flags were removed.
1616 Applications can determine this capability more accurately using the
1617 new cropping and scaling interface. The
1618 <constant>V4L2_FBUF_CAP_CLIPPING</constant> flag was replaced by
1619 <constant>V4L2_FBUF_CAP_LIST_CLIPPING</constant> and
1620 <constant>V4L2_FBUF_CAP_BITMAP_CLIPPING</constant>.</para>
1624 <para>In &v4l2-clip; the <structfield>x</structfield>,
1625 <structfield>y</structfield>, <structfield>width</structfield> and
1626 <structfield>height</structfield> field moved into a
1627 <structfield>c</structfield> substructure of type &v4l2-rect;. The
1628 <structfield>x</structfield> and <structfield>y</structfield> fields
1629 were renamed to <structfield>left</structfield> and
1630 <structfield>top</structfield>, &ie; offsets to a context dependent
1635 <para>In &v4l2-window; the <structfield>x</structfield>,
1636 <structfield>y</structfield>, <structfield>width</structfield> and
1637 <structfield>height</structfield> field moved into a
1638 <structfield>w</structfield> substructure as above. A
1639 <structfield>field</structfield> field of type %v4l2-field; was added
1640 to distinguish between field and frame (interlaced) overlay.</para>
1644 <para>The digital zoom interface, including struct
1645 <structname>v4l2_zoomcap</structname>, struct
1646 <structname>v4l2_zoom</structname>,
1647 <constant>V4L2_ZOOM_NONCAP</constant> and
1648 <constant>V4L2_ZOOM_WHILESTREAMING</constant> was replaced by a new
1649 cropping and scaling interface. The previously unused struct
1650 <structname>v4l2_cropcap</structname> and
1651 <structname>v4l2_crop</structname> where redefined for this purpose.
1652 See <xref linkend="crop" /> for details.</para>
1656 <para>In &v4l2-vbi-format; the
1657 <structfield>SAMPLE_FORMAT</structfield> field now contains a
1658 four-character-code as used to identify video image formats and
1659 <constant>V4L2_PIX_FMT_GREY</constant> replaces the
1660 <constant>V4L2_VBI_SF_UBYTE</constant> define. The
1661 <structfield>reserved</structfield> field was extended.</para>
1665 <para>In &v4l2-captureparm; the type of the
1666 <structfield>timeperframe</structfield> field changed from unsigned
1667 long to &v4l2-fract;. This allows the accurate expression of multiples
1668 of the NTSC-M frame rate 30000 / 1001. A new field
1669 <structfield>readbuffers</structfield> was added to control the driver
1670 behaviour in read I/O mode.</para>
1672 <para>Similar changes were made to &v4l2-outputparm;.</para>
1676 <para>The struct <structname>v4l2_performance</structname>
1677 and <constant>VIDIOC_G_PERF</constant> ioctl were dropped. Except when
1678 using the <link linkend="rw">read/write I/O method</link>, which is
1679 limited anyway, this information is already available to
1680 applications.</para>
1684 <para>The example transformation from RGB to YCbCr color
1685 space in the old V4L2 documentation was inaccurate, this has been
1686 corrected in <xref linkend="pixfmt" />.<!-- 0.5670G should be
1687 0.587, and 127/112 != 255/224 --></para>
1693 <title>V4L2 2003-06-19</title>
1697 <para>A new capability flag
1698 <constant>V4L2_CAP_RADIO</constant> was added for radio devices. Prior
1699 to this change radio devices would identify solely by having exactly one
1700 tuner whose type field reads <constant>V4L2_TUNER_RADIO</constant>.</para>
1704 <para>An optional driver access priority mechanism was
1705 added, see <xref linkend="app-pri" /> for details.</para>
1709 <para>The audio input and output interface was found to be
1711 <para>Previously the &VIDIOC-G-AUDIO;
1712 ioctl would enumerate the available audio inputs. An ioctl to
1713 determine the current audio input, if more than one combines with the
1714 current video input, did not exist. So
1715 <constant>VIDIOC_G_AUDIO</constant> was renamed to
1716 <constant>VIDIOC_G_AUDIO_OLD</constant>, this ioctl will be removed in
1717 the future. The &VIDIOC-ENUMAUDIO; ioctl was added to enumerate
1718 audio inputs, while &VIDIOC-G-AUDIO; now reports the current audio
1720 <para>The same changes were made to &VIDIOC-G-AUDOUT; and
1721 &VIDIOC-ENUMAUDOUT;.</para>
1722 <para>Until further the "videodev" module will automatically
1723 translate between the old and new ioctls, but drivers and applications
1724 must be updated to successfully compile again.</para>
1728 <para>The &VIDIOC-OVERLAY; ioctl was incorrectly defined with
1729 write-read parameter. It was changed to write-only, while the write-read
1730 version was renamed to <constant>VIDIOC_OVERLAY_OLD</constant>. The old
1731 ioctl will be removed in the future. Until further the "videodev"
1732 kernel module will automatically translate to the new version, so drivers
1733 must be recompiled, but not applications.</para>
1737 <para><xref linkend="overlay" /> incorrectly stated that
1738 clipping rectangles define regions where the video can be seen.
1739 Correct is that clipping rectangles define regions where
1740 <emphasis>no</emphasis> video shall be displayed and so the graphics
1741 surface can be seen.</para>
1745 <para>The &VIDIOC-S-PARM; and &VIDIOC-S-CTRL; ioctls were
1746 defined with write-only parameter, inconsistent with other ioctls
1747 modifying their argument. They were changed to write-read, while a
1748 <constant>_OLD</constant> suffix was added to the write-only versions.
1749 The old ioctls will be removed in the future. Drivers and
1750 applications assuming a constant parameter need an update.</para>
1756 <title>V4L2 2003-11-05</title>
1759 <para>In <xref linkend="pixfmt-rgb" /> the following pixel
1760 formats were incorrectly transferred from Bill Dirks' V4L2
1761 specification. Descriptions below refer to bytes in memory, in
1762 ascending address order.<informaltable>
1766 <entry>Symbol</entry>
1767 <entry>In this document prior to revision
1769 <entry>Corrected</entry>
1772 <tbody valign="top">
1774 <entry><constant>V4L2_PIX_FMT_RGB24</constant></entry>
1775 <entry>B, G, R</entry>
1776 <entry>R, G, B</entry>
1779 <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
1780 <entry>R, G, B</entry>
1781 <entry>B, G, R</entry>
1784 <entry><constant>V4L2_PIX_FMT_RGB32</constant></entry>
1785 <entry>B, G, R, X</entry>
1786 <entry>R, G, B, X</entry>
1789 <entry><constant>V4L2_PIX_FMT_BGR32</constant></entry>
1790 <entry>R, G, B, X</entry>
1791 <entry>B, G, R, X</entry>
1795 </informaltable> The
1796 <constant>V4L2_PIX_FMT_BGR24</constant> example was always
1798 <para>In <xref linkend="v4l-image-properties" /> the mapping
1799 of the V4L <constant>VIDEO_PALETTE_RGB24</constant> and
1800 <constant>VIDEO_PALETTE_RGB32</constant> formats to V4L2 pixel formats
1801 was accordingly corrected.</para>
1805 <para>Unrelated to the fixes above, drivers may still
1806 interpret some V4L2 RGB pixel formats differently. These issues have
1807 yet to be addressed, for details see <xref
1808 linkend="pixfmt-rgb" />.</para>
1814 <title>V4L2 in Linux 2.6.6, 2004-05-09</title>
1817 <para>The &VIDIOC-CROPCAP; ioctl was incorrectly defined
1818 with read-only parameter. It is now defined as write-read ioctl, while
1819 the read-only version was renamed to
1820 <constant>VIDIOC_CROPCAP_OLD</constant>. The old ioctl will be removed
1821 in the future.</para>
1827 <title>V4L2 in Linux 2.6.8</title>
1830 <para>A new field <structfield>input</structfield> (former
1831 <structfield>reserved[0]</structfield>) was added to the &v4l2-buffer;
1832 structure. Purpose of this field is to alternate between video inputs
1833 (⪚ cameras) in step with the video capturing process. This function
1834 must be enabled with the new <constant>V4L2_BUF_FLAG_INPUT</constant>
1835 flag. The <structfield>flags</structfield> field is no longer
1842 <title>V4L2 spec erratum 2004-08-01</title>
1846 <para>The return value of the
1847 <xref linkend="func-open" /> function was incorrectly documented.</para>
1851 <para>Audio output ioctls end in -AUDOUT, not -AUDIOOUT.</para>
1855 <para>In the Current Audio Input example the
1856 <constant>VIDIOC_G_AUDIO</constant> ioctl took the wrong
1861 <para>The documentation of the &VIDIOC-QBUF; and
1862 &VIDIOC-DQBUF; ioctls did not mention the &v4l2-buffer;
1863 <structfield>memory</structfield> field. It was also missing from
1864 examples. Also on the <constant>VIDIOC_DQBUF</constant> page the &EIO;
1865 was not documented.</para>
1871 <title>V4L2 in Linux 2.6.14</title>
1874 <para>A new sliced VBI interface was added. It is documented
1875 in <xref linkend="sliced" /> and replaces the interface first
1876 proposed in V4L2 specification 0.8.</para>
1882 <title>V4L2 in Linux 2.6.15</title>
1885 <para>The &VIDIOC-LOG-STATUS; ioctl was added.</para>
1889 <para>New video standards
1890 <constant>V4L2_STD_NTSC_443</constant>,
1891 <constant>V4L2_STD_SECAM_LC</constant>,
1892 <constant>V4L2_STD_SECAM_DK</constant> (a set of SECAM D, K and K1),
1893 and <constant>V4L2_STD_ATSC</constant> (a set of
1894 <constant>V4L2_STD_ATSC_8_VSB</constant> and
1895 <constant>V4L2_STD_ATSC_16_VSB</constant>) were defined. Note the
1896 <constant>V4L2_STD_525_60</constant> set now includes
1897 <constant>V4L2_STD_NTSC_443</constant>. See also <xref
1898 linkend="v4l2-std-id" />.</para>
1902 <para>The <constant>VIDIOC_G_COMP</constant> and
1903 <constant>VIDIOC_S_COMP</constant> ioctl were renamed to
1904 <constant>VIDIOC_G_MPEGCOMP</constant> and
1905 <constant>VIDIOC_S_MPEGCOMP</constant> respectively. Their argument
1906 was replaced by a struct
1907 <structname>v4l2_mpeg_compression</structname> pointer. (The
1908 <constant>VIDIOC_G_MPEGCOMP</constant> and
1909 <constant>VIDIOC_S_MPEGCOMP</constant> ioctls where removed in Linux
1916 <title>V4L2 spec erratum 2005-11-27</title>
1917 <para>The capture example in <xref linkend="capture-example" />
1918 called the &VIDIOC-S-CROP; ioctl without checking if cropping is
1919 supported. In the video standard selection example in
1920 <xref linkend="standard" /> the &VIDIOC-S-STD; call used the wrong
1921 argument type.</para>
1925 <title>V4L2 spec erratum 2006-01-10</title>
1928 <para>The <constant>V4L2_IN_ST_COLOR_KILL</constant> flag in
1929 &v4l2-input; not only indicates if the color killer is enabled, but
1930 also if it is active. (The color killer disables color decoding when
1931 it detects no color in the video signal to improve the image
1936 <para>&VIDIOC-S-PARM; is a write-read ioctl, not write-only as
1937 stated on its reference page. The ioctl changed in 2003 as noted above.</para>
1943 <title>V4L2 spec erratum 2006-02-03</title>
1946 <para>In &v4l2-captureparm; and &v4l2-outputparm; the
1947 <structfield>timeperframe</structfield> field gives the time in
1948 seconds, not microseconds.</para>
1954 <title>V4L2 spec erratum 2006-02-04</title>
1957 <para>The <structfield>clips</structfield> field in
1958 &v4l2-window; must point to an array of &v4l2-clip;, not a linked
1959 list, because drivers ignore the struct
1960 <structname>v4l2_clip</structname>.<structfield>next</structfield>
1967 <title>V4L2 in Linux 2.6.17</title>
1970 <para>New video standard macros were added:
1971 <constant>V4L2_STD_NTSC_M_KR</constant> (NTSC M South Korea), and the
1972 sets <constant>V4L2_STD_MN</constant>,
1973 <constant>V4L2_STD_B</constant>, <constant>V4L2_STD_GH</constant> and
1974 <constant>V4L2_STD_DK</constant>. The
1975 <constant>V4L2_STD_NTSC</constant> and
1976 <constant>V4L2_STD_SECAM</constant> sets now include
1977 <constant>V4L2_STD_NTSC_M_KR</constant> and
1978 <constant>V4L2_STD_SECAM_LC</constant> respectively.</para>
1982 <para>A new <constant>V4L2_TUNER_MODE_LANG1_LANG2</constant>
1983 was defined to record both languages of a bilingual program. The
1984 use of <constant>V4L2_TUNER_MODE_STEREO</constant> for this purpose
1985 is deprecated now. See the &VIDIOC-G-TUNER; section for
1992 <title>V4L2 spec erratum 2006-09-23 (Draft 0.15)</title>
1995 <para>In various places
1996 <constant>V4L2_BUF_TYPE_SLICED_VBI_CAPTURE</constant> and
1997 <constant>V4L2_BUF_TYPE_SLICED_VBI_OUTPUT</constant> of the sliced VBI
1998 interface were not mentioned along with other buffer types.</para>
2002 <para>In <xref linkend="vidioc-g-audio" /> it was clarified
2003 that the &v4l2-audio; <structfield>mode</structfield> field is a flags
2008 <para><xref linkend="vidioc-querycap" /> did not mention the
2009 sliced VBI and radio capability flags.</para>
2013 <para>In <xref linkend="vidioc-g-frequency" /> it was
2014 clarified that applications must initialize the tuner
2015 <structfield>type</structfield> field of &v4l2-frequency; before
2016 calling &VIDIOC-S-FREQUENCY;.</para>
2020 <para>The <structfield>reserved</structfield> array
2021 in &v4l2-requestbuffers; has 2 elements, not 32.</para>
2025 <para>In <xref linkend="output" /> and <xref
2026 linkend="raw-vbi" /> the device file names
2027 <filename>/dev/vout</filename> which never caught on were replaced
2028 by <filename>/dev/video</filename>.</para>
2032 <para>With Linux 2.6.15 the possible range for VBI device minor
2033 numbers was extended from 224-239 to 224-255. Accordingly device file names
2034 <filename>/dev/vbi0</filename> to <filename>/dev/vbi31</filename> are
2035 possible now.</para>
2041 <title>V4L2 in Linux 2.6.18</title>
2044 <para>New ioctls &VIDIOC-G-EXT-CTRLS;, &VIDIOC-S-EXT-CTRLS;
2045 and &VIDIOC-TRY-EXT-CTRLS; were added, a flag to skip unsupported
2046 controls with &VIDIOC-QUERYCTRL;, new control types
2047 <constant>V4L2_CTRL_TYPE_INTEGER64</constant> and
2048 <constant>V4L2_CTRL_TYPE_CTRL_CLASS</constant> (<xref
2049 linkend="v4l2-ctrl-type" />), and new control flags
2050 <constant>V4L2_CTRL_FLAG_READ_ONLY</constant>,
2051 <constant>V4L2_CTRL_FLAG_UPDATE</constant>,
2052 <constant>V4L2_CTRL_FLAG_INACTIVE</constant> and
2053 <constant>V4L2_CTRL_FLAG_SLIDER</constant> (<xref
2054 linkend="control-flags" />). See <xref
2055 linkend="extended-controls" /> for details.</para>
2061 <title>V4L2 in Linux 2.6.19</title>
2064 <para>In &v4l2-sliced-vbi-cap; a buffer type field was added
2065 replacing a reserved field. Note on architectures where the size of
2066 enum types differs from int types the size of the structure changed.
2067 The &VIDIOC-G-SLICED-VBI-CAP; ioctl was redefined from being read-only
2068 to write-read. Applications must initialize the type field and clear
2069 the reserved fields now. These changes may <emphasis>break the
2070 compatibility</emphasis> with older drivers and applications.</para>
2074 <para>The ioctls &VIDIOC-ENUM-FRAMESIZES; and
2075 &VIDIOC-ENUM-FRAMEINTERVALS; were added.</para>
2079 <para>A new pixel format <constant>V4L2_PIX_FMT_RGB444</constant> (<xref
2080 linkend="rgb-formats" />) was added.</para>
2086 <title>V4L2 spec erratum 2006-10-12 (Draft 0.17)</title>
2089 <para><constant>V4L2_PIX_FMT_HM12</constant> (<xref
2090 linkend="reserved-formats" />) is a YUV 4:2:0, not 4:2:2 format.</para>
2096 <title>V4L2 in Linux 2.6.21</title>
2099 <para>The <filename>videodev2.h</filename> header file is
2100 now dual licensed under GNU General Public License version two or
2101 later, and under a 3-clause BSD-style license.</para>
2107 <title>V4L2 in Linux 2.6.22</title>
2110 <para>Two new field orders
2111 <constant>V4L2_FIELD_INTERLACED_TB</constant> and
2112 <constant>V4L2_FIELD_INTERLACED_BT</constant> were
2113 added. See <xref linkend="v4l2-field" /> for details.</para>
2117 <para>Three new clipping/blending methods with a global or
2118 straight or inverted local alpha value were added to the video overlay
2119 interface. See the description of the &VIDIOC-G-FBUF; and
2120 &VIDIOC-S-FBUF; ioctls for details.</para>
2121 <para>A new <structfield>global_alpha</structfield> field
2123 linkend="v4l2-window"><structname>v4l2_window</structname></link>,
2124 extending the structure. This may <emphasis>break
2125 compatibility</emphasis> with applications using a struct
2126 <structname>v4l2_window</structname> directly. However the <link
2127 linkend="vidioc-g-fmt">VIDIOC_G/S/TRY_FMT</link> ioctls, which take a
2128 pointer to a <link linkend="v4l2-format">v4l2_format</link> parent
2129 structure with padding bytes at the end, are not affected.</para>
2133 <para>The format of the <structfield>chromakey</structfield>
2134 field in &v4l2-window; changed from "host order RGB32" to a pixel
2135 value in the same format as the framebuffer. This may <emphasis>break
2136 compatibility</emphasis> with existing applications. Drivers
2137 supporting the "host order RGB32" format are not known.</para>
2144 <title>V4L2 in Linux 2.6.24</title>
2147 <para>The pixel formats
2148 <constant>V4L2_PIX_FMT_PAL8</constant>,
2149 <constant>V4L2_PIX_FMT_YUV444</constant>,
2150 <constant>V4L2_PIX_FMT_YUV555</constant>,
2151 <constant>V4L2_PIX_FMT_YUV565</constant> and
2152 <constant>V4L2_PIX_FMT_YUV32</constant> were added.</para>
2158 <title>V4L2 in Linux 2.6.25</title>
2161 <para>The pixel formats <link linkend="V4L2-PIX-FMT-Y16">
2162 <constant>V4L2_PIX_FMT_Y16</constant></link> and <link
2163 linkend="V4L2-PIX-FMT-SBGGR16">
2164 <constant>V4L2_PIX_FMT_SBGGR16</constant></link> were added.</para>
2167 <para>New <link linkend="control">controls</link>
2168 <constant>V4L2_CID_POWER_LINE_FREQUENCY</constant>,
2169 <constant>V4L2_CID_HUE_AUTO</constant>,
2170 <constant>V4L2_CID_WHITE_BALANCE_TEMPERATURE</constant>,
2171 <constant>V4L2_CID_SHARPNESS</constant> and
2172 <constant>V4L2_CID_BACKLIGHT_COMPENSATION</constant> were added. The
2173 controls <constant>V4L2_CID_BLACK_LEVEL</constant>,
2174 <constant>V4L2_CID_WHITENESS</constant>,
2175 <constant>V4L2_CID_HCENTER</constant> and
2176 <constant>V4L2_CID_VCENTER</constant> were deprecated.
2180 <para>A <link linkend="camera-controls">Camera controls
2181 class</link> was added, with the new controls
2182 <constant>V4L2_CID_EXPOSURE_AUTO</constant>,
2183 <constant>V4L2_CID_EXPOSURE_ABSOLUTE</constant>,
2184 <constant>V4L2_CID_EXPOSURE_AUTO_PRIORITY</constant>,
2185 <constant>V4L2_CID_PAN_RELATIVE</constant>,
2186 <constant>V4L2_CID_TILT_RELATIVE</constant>,
2187 <constant>V4L2_CID_PAN_RESET</constant>,
2188 <constant>V4L2_CID_TILT_RESET</constant>,
2189 <constant>V4L2_CID_PAN_ABSOLUTE</constant>,
2190 <constant>V4L2_CID_TILT_ABSOLUTE</constant>,
2191 <constant>V4L2_CID_FOCUS_ABSOLUTE</constant>,
2192 <constant>V4L2_CID_FOCUS_RELATIVE</constant> and
2193 <constant>V4L2_CID_FOCUS_AUTO</constant>.</para>
2196 <para>The <constant>VIDIOC_G_MPEGCOMP</constant> and
2197 <constant>VIDIOC_S_MPEGCOMP</constant> ioctls, which were superseded
2198 by the <link linkend="extended-controls">extended controls</link>
2199 interface in Linux 2.6.18, where finally removed from the
2200 <filename>videodev2.h</filename> header file.</para>
2206 <title>V4L2 in Linux 2.6.26</title>
2209 <para>The pixel formats
2210 <constant>V4L2_PIX_FMT_Y16</constant> and
2211 <constant>V4L2_PIX_FMT_SBGGR16</constant> were added.</para>
2214 <para>Added user controls
2215 <constant>V4L2_CID_CHROMA_AGC</constant> and
2216 <constant>V4L2_CID_COLOR_KILLER</constant>.</para>
2222 <title>V4L2 in Linux 2.6.27</title>
2225 <para>The &VIDIOC-S-HW-FREQ-SEEK; ioctl and the
2226 <constant>V4L2_CAP_HW_FREQ_SEEK</constant> capability were added.</para>
2229 <para>The pixel formats
2230 <constant>V4L2_PIX_FMT_YVYU</constant>,
2231 <constant>V4L2_PIX_FMT_PCA501</constant>,
2232 <constant>V4L2_PIX_FMT_PCA505</constant>,
2233 <constant>V4L2_PIX_FMT_PCA508</constant>,
2234 <constant>V4L2_PIX_FMT_PCA561</constant>,
2235 <constant>V4L2_PIX_FMT_SGBRG8</constant>,
2236 <constant>V4L2_PIX_FMT_PAC207</constant> and
2237 <constant>V4L2_PIX_FMT_PJPG</constant> were added.</para>
2243 <title>V4L2 in Linux 2.6.28</title>
2246 <para>Added <constant>V4L2_MPEG_AUDIO_ENCODING_AAC</constant> and
2247 <constant>V4L2_MPEG_AUDIO_ENCODING_AC3</constant> MPEG audio encodings.</para>
2250 <para>Added <constant>V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC</constant> MPEG
2251 video encoding.</para>
2254 <para>The pixel formats
2255 <constant>V4L2_PIX_FMT_SGRBG10</constant> and
2256 <constant>V4L2_PIX_FMT_SGRBG10DPCM8</constant> were added.</para>
2262 <title>V4L2 in Linux 2.6.29</title>
2265 <para>The <constant>VIDIOC_G_CHIP_IDENT</constant> ioctl was renamed
2266 to <constant>VIDIOC_G_CHIP_IDENT_OLD</constant> and &VIDIOC-DBG-G-CHIP-IDENT;
2267 was introduced in its place. The old struct <structname>v4l2_chip_ident</structname>
2268 was renamed to <structname id="v4l2-chip-ident-old">v4l2_chip_ident_old</structname>.</para>
2271 <para>The pixel formats
2272 <constant>V4L2_PIX_FMT_VYUY</constant>,
2273 <constant>V4L2_PIX_FMT_NV16</constant> and
2274 <constant>V4L2_PIX_FMT_NV61</constant> were added.</para>
2277 <para>Added camera controls
2278 <constant>V4L2_CID_ZOOM_ABSOLUTE</constant>,
2279 <constant>V4L2_CID_ZOOM_RELATIVE</constant>,
2280 <constant>V4L2_CID_ZOOM_CONTINUOUS</constant> and
2281 <constant>V4L2_CID_PRIVACY</constant>.</para>
2286 <title>V4L2 in Linux 2.6.30</title>
2289 <para>New control flag <constant>V4L2_CTRL_FLAG_WRITE_ONLY</constant> was added.</para>
2292 <para>New control <constant>V4L2_CID_COLORFX</constant> was added.</para>
2297 <title>V4L2 in Linux 2.6.32</title>
2300 <para>In order to be easier to compare a V4L2 API and a kernel
2301 version, now V4L2 API is numbered using the Linux Kernel version numeration.</para>
2304 <para>Finalized the RDS capture API. See <xref linkend="rds" /> for
2305 more information.</para>
2308 <para>Added new capabilities for modulators and RDS encoders.</para>
2311 <para>Add description for libv4l API.</para>
2314 <para>Added support for string controls via new type <constant>V4L2_CTRL_TYPE_STRING</constant>.</para>
2317 <para>Added <constant>V4L2_CID_BAND_STOP_FILTER</constant> documentation.</para>
2320 <para>Added FM Modulator (FM TX) Extended Control Class: <constant>V4L2_CTRL_CLASS_FM_TX</constant> and their Control IDs.</para>
2323 <para>Added Remote Controller chapter, describing the default Remote Controller mapping for media devices.</para>
2328 <title>V4L2 in Linux 2.6.33</title>
2331 <para>Added support for Digital Video timings in order to support HDTV receivers and transmitters.</para>
2337 <section id="other">
2338 <title>Relation of V4L2 to other Linux multimedia APIs</title>
2340 <section id="xvideo">
2341 <title>X Video Extension</title>
2343 <para>The X Video Extension (abbreviated XVideo or just Xv) is
2344 an extension of the X Window system, implemented for example by the
2345 XFree86 project. Its scope is similar to V4L2, an API to video capture
2346 and output devices for X clients. Xv allows applications to display
2347 live video in a window, send window contents to a TV output, and
2348 capture or output still images in XPixmaps<footnote>
2349 <para>This is not implemented in XFree86.</para>
2350 </footnote>. With their implementation XFree86 makes the
2351 extension available across many operating systems and
2352 architectures.</para>
2354 <para>Because the driver is embedded into the X server Xv has a
2355 number of advantages over the V4L2 <link linkend="overlay">video
2356 overlay interface</link>. The driver can easily determine the overlay
2357 target, &ie; visible graphics memory or off-screen buffers for a
2358 destructive overlay. It can program the RAMDAC for a non-destructive
2359 overlay, scaling or color-keying, or the clipping functions of the
2360 video capture hardware, always in sync with drawing operations or
2361 windows moving or changing their stacking order.</para>
2363 <para>To combine the advantages of Xv and V4L a special Xv
2364 driver exists in XFree86 and XOrg, just programming any overlay capable
2365 Video4Linux device it finds. To enable it
2366 <filename>/etc/X11/XF86Config</filename> must contain these lines:</para>
2370 EndSection</screen></para>
2372 <para>As of XFree86 4.2 this driver still supports only V4L
2373 ioctls, however it should work just fine with all V4L2 devices through
2374 the V4L2 backward-compatibility layer. Since V4L2 permits multiple
2375 opens it is possible (if supported by the V4L2 driver) to capture
2376 video while an X client requested video overlay. Restrictions of
2377 simultaneous capturing and overlay are discussed in <xref
2378 linkend="overlay" /> apply.</para>
2380 <para>Only marginally related to V4L2, XFree86 extended Xv to
2381 support hardware YUV to RGB conversion and scaling for faster video
2382 playback, and added an interface to MPEG-2 decoding hardware. This API
2383 is useful to display images captured with V4L2 devices.</para>
2387 <title>Digital Video</title>
2389 <para>V4L2 does not support digital terrestrial, cable or
2390 satellite broadcast. A separate project aiming at digital receivers
2391 exists. You can find its homepage at <ulink
2392 url="http://linuxtv.org">http://linuxtv.org</ulink>. The Linux DVB API
2393 has no connection to the V4L2 API except that drivers for hybrid
2394 hardware may support both.</para>
2398 <title>Audio Interfaces</title>
2400 <para>[to do - OSS/ALSA]</para>
2404 <section id="experimental">
2405 <title>Experimental API Elements</title>
2407 <para>The following V4L2 API elements are currently experimental
2408 and may change in the future.</para>
2412 <para>Video Output Overlay (OSD) Interface, <xref
2413 linkend="osd" />.</para>
2416 <para><constant>V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY</constant>,
2417 &v4l2-buf-type;, <xref linkend="v4l2-buf-type" />.</para>
2420 <para><constant>V4L2_CAP_VIDEO_OUTPUT_OVERLAY</constant>,
2421 &VIDIOC-QUERYCAP; ioctl, <xref linkend="device-capabilities" />.</para>
2424 <para>&VIDIOC-ENUM-FRAMESIZES; and
2425 &VIDIOC-ENUM-FRAMEINTERVALS; ioctls.</para>
2428 <para>&VIDIOC-G-ENC-INDEX; ioctl.</para>
2431 <para>&VIDIOC-ENCODER-CMD; and &VIDIOC-TRY-ENCODER-CMD;
2435 <para>&VIDIOC-DBG-G-REGISTER; and &VIDIOC-DBG-S-REGISTER;
2439 <para>&VIDIOC-DBG-G-CHIP-IDENT; ioctl.</para>
2444 <section id="obsolete">
2445 <title>Obsolete API Elements</title>
2447 <para>The following V4L2 API elements were superseded by new
2448 interfaces and should not be implemented in new drivers.</para>
2452 <para><constant>VIDIOC_G_MPEGCOMP</constant> and
2453 <constant>VIDIOC_S_MPEGCOMP</constant> ioctls. Use Extended Controls,
2454 <xref linkend="extended-controls" />.</para>
2462 sgml-parent-document: "v4l2.sgml"
2463 indent-tabs-mode: nil
git.samba.org / sfrench / cifs-2.6.git / blob