arch: define CONFIG_PAGE_SIZE_*KB on all architectures Most architectures only support a single hardcoded page size. In order to ensure that each one of these sets the corresponding Kconfig symbols, change over the PAGE_SHIFT definition to the common one and allow only the hardware page size to be selected. Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Stafford Horne <shorne@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Kconfig: introduce HAS_IOPORT option and select it as necessary We introduce a new HAS_IOPORT Kconfig option to indicate support for I/O Port access. In a future patch HAS_IOPORT=n will disable compilation of the I/O accessor functions inb()/outb() and friends on architectures which can not meaningfully support legacy I/O spaces such as s390. The following architectures do not select HAS_IOPORT: * ARC * C-SKY * Hexagon * Nios II * OpenRISC * s390 * User-Mode Linux * Xtensa All other architectures select HAS_IOPORT at least conditionally. The "depends on" relations on HAS_IOPORT in drivers as well as ifdefs for HAS_IOPORT specific sections will be added in subsequent patches on a per subsystem basis. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> # for ARCH=um Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
microblaze/PCI: Remove support for Xilinx PCI host bridge This patch removes support for the Xilinx PCI host bridge IPcore. Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com> Link: https://lore.kernel.org/r/20221025065214.4663-13-thippeswamy.havalige@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
microblaze: Add xmb_manager_register function Triple Modular Redundancy (TMR) Microblaze solution provides soft error injection, detection, correction and recovery for Microblaze cores in the system. The Xilinx/AMD Triple Modular Redundancy (TMR) solution in Vivado provides all the necessary building blocks to implement a redundant triplicated MicroBlaze subsystem. This processing subsystem is fault-tolerant and continues to operate nominally after encountering an error. Together with the capability to detect and recover from errors, the implementation ensures the reliability of the entire subsystem. When the break vector gets asserted because of error injection, the break signal must be blocked before exiting from the break handler, This commit adds support for xmb_manager_register api which updates the TMR manager address and control register and error count and reset callback function arguments, which will be used by the break handler to block the break and call the error count callback function and reset callback function. Signed-off-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> Link: https://lore.kernel.org/r/20220627064024.771037-2-appana.durga.rao@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
Merge tag 'asm-generic-6.0' of git://git./linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are three independent sets of changes: - Sai Prakash Ranjan adds tracing support to the asm-generic version of the MMIO accessors, which is intended to help understand problems with device drivers and has been part of Qualcomm's vendor kernels for many years - A patch from Sebastian Siewior to rework the handling of IRQ stacks in softirqs across architectures, which is needed for enabling PREEMPT_RT - The last patch to remove the CONFIG_VIRT_TO_BUS option and some of the code behind that, after the last users of this old interface made it in through the netdev, scsi, media and staging trees" * tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: uapi: asm-generic: fcntl: Fix typo 'the the' in comment arch/*/: remove CONFIG_VIRT_TO_BUS soc: qcom: geni: Disable MMIO tracing for GENI SE serial: qcom_geni_serial: Disable MMIO tracing for geni serial asm-generic/io: Add logging support for MMIO accessors KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM lib: Add register read/write tracing support drm/meson: Fix overflow implicit truncation warnings irqchip/tegra: Fix overflow implicit truncation warnings coresight: etm4x: Use asm-generic IO memory barriers arm64: io: Use asm-generic high level MMIO accessors arch/*: Disable softirq stacks on PREEMPT_RT.
arch: microblaze: Remove unused "select HANDLE_DOMAIN_IRQ" The "CONFIG_HANDLE_DOMAIN_IRQ" item has not been used right now. Remove the old unused selection in config MICROBLAZE. Signed-off-by: Ying Sun <sunying@nj.iscas.ac.cn> Link: https://lore.kernel.org/r/20220629080652.28029-1-sunying@nj.iscas.ac.cn Signed-off-by: Michal Simek <michal.simek@amd.com>
arch/*/: remove CONFIG_VIRT_TO_BUS All architecture-independent users of virt_to_bus() and bus_to_virt() have been fixed to use the dma mapping interfaces or have been removed now. This means the definitions on most architectures, and the CONFIG_VIRT_TO_BUS symbol are now obsolete and can be removed. The only exceptions to this are a few network and scsi drivers for m68k Amiga and VME machines and ppc32 Macintosh. These drivers work correctly with the old interfaces and are probably not worth changing. On alpha and parisc, virt_to_bus() were still used in asm/floppy.h. alpha can use isa_virt_to_bus() like x86 does, and parisc can just open-code the virt_to_phys() here, as this is architecture specific code. I tried updating the bus-virt-phys-mapping.rst documentation, which started as an email from Linus to explain some details of the Linux-2.0 driver interfaces. The bits about virt_to_bus() were declared obsolete backin 2000, and the rest is not all that relevant any more, so in the end I just decided to remove the file completely. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'asm-generic-5.18' of git://git./linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are three sets of updates for 5.18 in the asm-generic tree: - The set_fs()/get_fs() infrastructure gets removed for good. This was already gone from all major architectures, but now we can finally remove it everywhere, which loses some particularly tricky and error-prone code. There is a small merge conflict against a parisc cleanup, the solution is to use their new version. - The nds32 architecture ends its tenure in the Linux kernel. The hardware is still used and the code is in reasonable shape, but the mainline port is not actively maintained any more, as all remaining users are thought to run vendor kernels that would never be updated to a future release. - A series from Masahiro Yamada cleans up some of the uapi header files to pass the compile-time checks" * tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits) nds32: Remove the architecture uaccess: remove CONFIG_SET_FS ia64: remove CONFIG_SET_FS support sh: remove CONFIG_SET_FS support sparc64: remove CONFIG_SET_FS support lib/test_lockup: fix kernel pointer check for separate address spaces uaccess: generalize access_ok() uaccess: fix type mismatch warnings from access_ok() arm64: simplify access_ok() m68k: fix access_ok for coldfire MIPS: use simpler access_ok() MIPS: Handle address errors for accesses above CPU max virtual user address uaccess: add generic __{get,put}_kernel_nofault nios2: drop access_ok() check from __put_user() x86: use more conventional access_ok() definition x86: remove __range_not_ok() sparc64: add __{get,put}_kernel_nofault() nds32: fix access_ok() checks in get/put_user uaccess: fix nios2 and microblaze get_user_8() sparc64: fix building assembly files ...
irqchip/xilinx: Switch to GENERIC_IRQ_MULTI_HANDLER Register the Xilinx driver as the root interrupt controller using the GENERIC_IRQ_MULTI_HANDLER API, instead of the arch-specific hack. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Stefan Asserhall <stefan.asserhall@xilinx.com> [maz: repainted commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/e6c6595a81f662bf839cee3109d0fa58a596ea47.1646380284.git.michal.simek@xilinx.com
uaccess: remove CONFIG_SET_FS There are no remaining callers of set_fs(), so CONFIG_SET_FS can be removed globally, along with the thread_info field and any references to it. This turns access_ok() into a cheaper check against TASK_SIZE_MAX. As CONFIG_SET_FS is now gone, drop all remaining references to set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel(). Acked-by: Sam Ravnborg <sam@ravnborg.org> # for sparc32 changes Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Tested-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> # for arc changes Acked-by: Stafford Horne <shorne@gmail.com> # [openrisc, asm-generic] Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
tracing: Refactor TRACE_IRQFLAGS_SUPPORT in Kconfig Make architectures select TRACE_IRQFLAGS_SUPPORT instead of having many defines. Link: https://lkml.kernel.org/r/20210731052233.4703-2-masahiroy@kernel.org Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> #arch/arc Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
mm: generalize ZONE_[DMA|DMA32] ZONE_[DMA|DMA32] configs have duplicate definitions on platforms that subscribe to them. Instead, just make them generic options which can be selected on applicable platforms. Also only x86/arm64 architectures could enable both ZONE_DMA and ZONE_DMA32 if EXPERT, add ARCH_HAS_ZONE_DMA_SET to make dma zone configurable and visible on the two architectures. Link: https://lkml.kernel.org/r/20210528074557.17768-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> [RISC-V] Acked-by: Michal Simek <michal.simek@xilinx.com> [microblaze] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'microblaze-v5.12' of git://git.monstr.eu/linux-2.6-microblaze Pull microblaze updates from Michal Simek: - Fix DTB alignment - Remove code for very old GCC versions - Remove TRACING_SUPPORT selection * tag 'microblaze-v5.12' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix built-in DTB alignment to be 8-byte aligned microblaze: Remove support for gcc < 4 microblaze: do not select TRACING_SUPPORT directly
arch: microblaze: Remove CONFIG_OPROFILE support The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Remove the old oprofile's architecture specific support. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
microblaze: do not select TRACING_SUPPORT directly Microblaze is the only architecture that selects TRACING_SUPPORT. In my understanding, it is computed by kernel/trace/Kconfig: config TRACING_SUPPORT bool depends on TRACE_IRQFLAGS_SUPPORT depends on STACKTRACE_SUPPORT default y Microblaze enables both TRACE_IRQFLAGS_SUPPORT and STACKTRACE_SUPPORT, so there is no change in the resulted configuration. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20201223152947.698744-1-masahiroy@kernel.org Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Merge tag 'microblaze-v5.11' of git://git.monstr.eu/linux-2.6-microblaze Pull microblaze updates from Michal Simek: "The biggest change is to remove support for noMMU configuration. FPGAs are bigger so people use Microblaze with MMU for a lot of years and there is likely no user of this code anymore. No one is updating libraries for this configuration either. - Remove noMMU support - Add support for TIF_NOTIFY_SIGNAL - Small header fix" * tag 'microblaze-v5.11' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Remove noMMU code microblaze: add support for TIF_NOTIFY_SIGNAL microblaze: Replace <linux/clk-provider.h> by <linux/of_clk.h>
Merge tag 'asm-generic-timers-5.11' of git://git./linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
microblaze: Remove noMMU code This configuration is obsolete and likely none is really using it. That's why remove it to simplify code. Note about CONFIG_MMU in hw_exception_handler.S is left intentionally for better comment understanding. Cc: Mike Rapoport <rppt@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/43486cab370e0c0a79860120b71e0caac75a7e44.1606397528.git.michal.simek@xilinx.com
microblaze/mm/highmem: Switch to generic kmap atomic No reason having the same code in every architecture. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201103095857.777445435@linutronix.de
timekeeping: default GENERIC_CLOCKEVENTS to enabled Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to require each one to select that symbol manually. Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as a simplification. It should be possible to select both GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now and decide at runtime between the two. For the clockevents arch-support.txt file, this means that additional architectures are marked as TODO when they have at least one machine that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when at least one machine has been converted. This means that both m68k and arm (for riscpc) revert to TODO. At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS rather than leaving it off when not needed. I built an m68k defconfig kernel (using gcc-10.1.0) and found that this would add around 5.5KB in kernel image size: text data bss dec hex filename 3861936 1092236 196656 5150828 4e986c obj-m68k/vmlinux-no-clockevent 3866201 1093832 196184 5156217 4ead79 obj-m68k/vmlinux-clockevent On Arm (MACH_RPC), that difference appears to be twice as large, around 11KB on top of an 6MB vmlinux. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>