mailto(rsync-bugs@samba.anu.edu.au) manpage(rsyncd.conf)(5)(13 May 1998)()() manpagename(rsyncd.conf)(configuration file for rsync server) manpagesynopsis() rsyncd.conf manpagedescription() The rsyncd.conf file is the runtime configuration file for rsync when run with the -daemon option. When run in this way rsync becomes a rsync server listening on TCP port 873. Connections from rsync clients are accepted for either anonymous or authenticated rsync sessions. The rsyncd.conf file controls authentication, access, logging and available modules. manpagesection(FILE FORMAT) The file consists of modules and parameters. A module begins with the name of the module in square brackets and continues until the next module begins. Modules contain parameters of the form 'name = value'. The file is line-based - that is, each newline-terminated line represents either a comment, a module name or a parameter. Only the first equals sign in a parameter is significant. Whitespace before or after the first equals sign is discarded. Leading, trailing and internal whitespace in module and parameter names is irrelevant. Leading and trailing whitespace in a parameter value is discarded. Internal whitespace within a parameter value is retained verbatim. Any line beginning with a hash (#) is ignored, as are lines containing only whitespace. Any line ending in a \e is "continued" on the next line in the customary UNIX fashion. The values following the equals sign in parameters are all either a string (no quotes needed) or a boolean, which may be given as yes/no, 0/1 or true/false. Case is not significant in boolean values, but is preserved in string values. manpagesection(LAUNCHING THE RSYNC DAEMON) The rsync daemon is launched by specifying the --daemon option to rsync. The daemon must run with root privileges. You can launch it either via inetd or as a standalone daemon. If run as a daemon then just run the command "rsync -daemon" from a suitable startup script. When run via inetd you should add a line like this to /etc/services: rsync 873/tcp and a line something like this to /etc/inetd.conf: rsync stream tcp nowait root /usr/bin/rsync rsyncd --daemon You will then need to send inetd a HUP signal to tell it to reread its config file. Note that you should not send the rsync server a HUP signal to force it to reread the /etc/rsyncd.conf. The file is re-read on each client connection. manpagesection(GLOBAL OPTIONS) The first parameters in the file (before a [module] header) are the global parameters. You may also include any module parameters in the global part of the config file in which case the supplied value will override the default for that parameter. startdit() dit(bf(motd file)) The "motd file" option allows you to specify a "message of the day" to display to clients on each connect. This usually contains site information and any legal notices. The default is no motd file. dit(bf(max connections)) The "max connections" option allows you to specify the maximum number of simultaneous connections you will allow to your rsync server. Any clients connecting when the maximum has been reached will receive a message telling them to try later. The default is 0 which means no limit. dit(bf(lock file)) The "lock file" option specifies the file to use to support the "max connections" option. The rsync server uses record locking on this file to ensure that the max connections limit is not exceeded. The default is /var/run/rsyncd.lock dit(bf(syslog facility)) The "syslog facility" option allows you to specify the syslog facility name to use when logging messages from the rsync server. You may use any standard syslog facility name which is defined on your system. Common names are auth, authpriv, cron, daemon, ftp, kern, lpr, mail, news, security, syslog, user, uucp, local0, local1, local2, local3, local4, local5, local6 and local7. The default is daemon. enddit() manpagesection(MODULE OPTIONS) After the global options you should define a number of modules, each module exports a directory tree as a symbolic name. Modules are exported by specifying a module name in square brackets [module] followed by the options for that module. startdit() dit(bf(comment)) The "comment" option specifies a description string that is displayed next to the module name when clients obtain a list of available modules. The default is no comment. dit(bf(path)) The "path" option specifies the directory in the servers filesystem to make available in this module. The rsync server will chroot to this path before starting the file transfer with the client. You must specify this option for each module in /etc/rsyncd.conf. dit(bf(read only)) The "read only" option determines whether clients will be able to upload files or not. If "read only" is true then any attempted uploads will fail. If "read only" is false then uploads will be possible if file permissions on the server allow them. The default is for all modules to be read only. dit(bf(list)) The "list" option determines if this module should be listed when the client asks for a listing of available modules. By setting this to false you can create hidden modules. The default is for modules to be listable. dit(bf(uid)) The "uid" option specifies the user name or user id that file transfers to and from that module should take place as. In combination with the "gid" option this determines what file permissions are available. The default is the user "nobody". dit(bf(gid)) The "gid" option specifies the group name or group id that file transfers to and from that module should take place as. This complements the "uid" option. The default is the group "nobody". dit(bf(auth users)) The "auth users" option specifies a comma and space separated list of usernames that will be allowed to connect to this module. The usernames do not need to exist on the local system. If "auth users" is set then the client will be challenged to supply a username and password to connect to the module. A challenge response authentication protocol is used for this exchange. The plain text usernames are passwords are stored in the file specified by the "secrets file" option. The default is for all users to be able to connect without a password (this is called "anonymous rsync"). dit(bf(secrets file)) The "secrets file" option specifies the name of a file that contains the username:password pairs used for authenticating this module. This file is only consulted if the "auth users" option is specified. The file is line based and contains username:password pairs separated by a single colon. Any line starting with a hash (#) is considered a comment and is skipped. The passwords can contain any characters but be warned that many operating systems limit the length of passwords that can be typed at the client end, so you may find that passwords longer than 8 characters don't work. bf(You should make sure that the secrets file is not readable by anyone other than the system administrator.) There is no default for the "secrets file" option, you must choose a name (such as /etc/rsyncd.secrets). dit(bf(hosts allow)) The "hosts allow" option allows you to specify a list of patterns that are matched against a connecting clients hostname and IP address. If none of the patterns match then the connection is rejected. Each pattern can be in one of five forms: itemize( it() a dotted decimal IP address. In this case the incoming machines IP address must match exactly. it() a address/mask in the form a.b.c.d/n were n is the number of one bits in in the netmask. All IP addresses which match the masked IP address will be allowed in. it() a address/mask in the form a.b.c.d/e.f.g.h where e.f.g.h is a netmask in dotted decimal notation. All IP addresses which match the masked IP address will be allowed in. it() a hostname. The hostname as determined by a reverse lookup will be matched (case insensitive) against the pattern. Only an exact match is allowed in. it() a hostname pattern using wildcards. These are matched using the same rules as normal unix filename matching. If the pattern matches then the client is allowed in. ) You can also combine "hosts allow" with a separate "hosts deny" option. If both options are specified then the "hosts allow" option s checked first and a match results in the client being able to connect. The "hosts deny" option is then checked and a match means that the host is rejected. If the host does not match either the "hosts allow" or the "hosts deny" patterns then it is allowed to connect. The default is no "hosts allow" option, which means all hosts can connect. dit(bf(hosts allow)) The "hosts deny" option allows you to specify a list of patterns that are matched against a connecting clients hostname and IP address. If the pattern matches then the connection is rejected. See the "hosts allow" option for more information. The default is no "hosts deny" option, which means all hosts can connect. enddit() manpagesection(EXAMPLES) A simple rsyncd.conf file that allow anonymous rsync to a ftp area at /home/ftp would be: verb( [ftp] path = /home/ftp comment = ftp export area ) A more sophisticated example would be: verb( uid = nobody gid = nobody max connections = 4 syslog facility = local5 [ftp] path = /var/ftp/pub comment = whole ftp area (approx 6.1 GB) [sambaftp] path = /var/ftp/pub/samba comment = Samba ftp area (approx 300 MB) [rsyncftp] path = /var/ftp/pub/rsync comment = rsync ftp area (approx 6 MB) [sambawww] path = /public_html/samba comment = Samba WWW pages (approx 240 MB) [cvs] path = /data/cvs comment = CVS repository (requires authentication) auth users = tridge, susan secrets file = /etc/rsyncd.secrets ) The /etc/rsyncd.secrets file would look something like this: verb( tridge:mypass susan:herpass ) manpagefiles() /etc/rsyncd.conf manpageseealso() rsync(1) manpagediagnostics() manpagebugs() The rsync server does not send all types of error messages to the client. this means a client may be mystified as to why a transfer failed. The error will have been logged by syslog on the server. Please report bugs! The rsync bug tracking system is online at url(http://samba.anu.edu.au/rsync/)(http://samba.anu.edu.au/rsync/) manpagesection(VERSION) This man page is current for version 2.0 of rsync manpagesection(CREDITS) rsync is distributed under the GNU public license. See the file COPYING for details. The primary ftp site for rsync is url(ftp://samba.anu.edu.au/pub/rsync)(ftp://samba.anu.edu.au/pub/rsync). A WEB site is available at url(http://samba.anu.edu.au/rsync/)(http://samba.anu.edu.au/rsync/) We would be delighted to hear from you if you like this program. This program uses the zlib compression library written by Jean-loup Gailly and Mark Adler. manpagesection(THANKS) Thanks to Warren Stanley for his original idea and patch for the rsync server. Thanks to Karsten Thygesen for his many suggestions and documentation! manpageauthor() rsync was written by Andrew Tridgell and Paul Mackerras. They may be contacted via email at tridge@samba.anu.edu.au and Paul.Mackerras@cs.anu.edu.au