-*- indented-text -*- Notes towards a new version of rsync Martin Pool , September 2001. Good things about the current implementation: - Widely known and adopted. - Fast/efficient, especially for moderately small sets of files over slow links (transoceanic or modem.) - Fairly reliable. - The choice of runnning over a plain TCP socket or tunneling over ssh. - rsync operations are idempotent: you can always run the same command twice to make sure it worked properly without any fear. (Are there any exceptions?) - Small changes to files cause small deltas. - There is a way to evolve the protocol to some extent. - rdiff and rsync --write-batch allow generation of standalone patch sets. rsync+ is pretty cheesy, though. xdelta seems cleaner. - Process triangle is creative, but seems to provoke OS bugs. - "Morning-after property": you don't need to know anything on the local machine about the state of the remote machine, or about transfers that have been done in the past. - You can easily push or pull simply by switching the order of files. - The "modules" system has some neat features compared to e.g. Apache's per-directory configuration. In particular, because you can set a userid and chroot directory, there is strong protection between different modules. I haven't seen any calls for a more flexible system. Bad things about the current implementation: - Persistent and hard-to-diagnose hang bugs remain - Protocol is sketchily documented, tied to this implementation, and hard to modify/extend - Both the program and the protocol assume a single non-interactive one-way transfer - A list of all files are held in memory for the entire transfer, which cripples scalability to large file trees - Opening a new socket for every operation causes problems, especially when running over SSH with password authentication. - Renamed files are not handled: the old file is removed, and the new file created from scratch. - The versioning approach assumes that future versions of the program know about all previous versions, and will do the right thing. - People always get confused about ':' vs '::' - Error messages can be cryptic. - Default behaviour is not intuitive: in too many cases rsync will happily do nothing. Perhaps -a should be the default? - People get confused by trailing slashes, though it's hard to think of another reasonable way to make this necessary distinction between a directory and its contents. Protocol philosophy: *The* big difference between protocols like HTTP, FTP, and NFS is that their fundamental operations are "read this file", "delete this file", and "make this directory", whereas rsync is "make this directory like this one". Questionable features: These are neat, but not necessarily clean or worth preserving. - The remote rsync can be wrapped by some other program, such as in tridge's rsync-mail scripts. The general feature of sending and retrieving mail over rsync is good, but this is perhaps not the right way to implement it. Desirable features: These don't really require architectural changes; they're just something to keep in mind. - Synchronize ACLs and extended attributes - Anonymous servers should be efficient - Code should be portable to non-UNIX systems - Should be possible to document the protocol in RFC form - --dry-run option - IPv6 support. Pretty straightforward. - Allow the basis and destination files to be different. For example, you could use this when you have a CD-ROM and want to download an updated image onto a hard drive. - Efficiently interrupt and restart a transfer. We can write a checkpoint file that says where we're up to in the filesystem. Alternatively, as long as transfers are idempotent, we can just restart the whole thing. [NFSv4] - Scripting support. - Propagate atimes and do not modify them. This is very ugly on Unix. It might be better to try to add O_NOATIME to kernels, and call that. - Unicode. Probably just use UTF-8 for everything. - Open authentication system. Can we use PAM? Is SASL an adequate mapping of PAM to the network, or useful in some other way? - Resume interrupted transfers without the --partial flag. We need to leave the temporary file behind, and then know to use it. This leaves a risk of large temporary files accumulating, which is not good. Perhaps it should be off by default. - tcpwrappers support. Should be trivial; can already be done through tcpd or inetd. - Socks support built in. It's not clear this is any better than just linking against the socks library, though. - When run over SSH, invoke with predictable command-line arguments, so that people can restrict what commands sshd will run. (Is this really required?) - Comparison mode: give a list of which files are new, gone, or different. Set return code depending on whether anything has changed. - Internationalized messages (gettext?) - Optionally use real regexps rather than globs? - Show overall progress. Pretty hard to do, especially if we insist on not scanning the directory tree up front. Regression testing: - Support automatic testing. - Have hard internal timeouts against hangs. - Be deterministic. - Measure performance. Hard links: At the moment, we can recreate hard links, but it's a bit inefficient: it depends on holding a list of all files in the tree. Every time we see a file with a linkcount >1, we need to search for another known name that has the same (fsid,inum) tuple. We could do that more efficiently by keeping a list of only files with linkcount>1, and removing files from that list as all their names become known. Command-line options: We have rather a lot at the moment. We might get more if the tool becomes more flexible. Do we need a .rc or configuration file? That wouldn't really fit with its pattern of use: cp and tar don't have them, though ssh does. Scripting issues: - Perhaps support multiple scripting languages: candidates include Perl, Python, Tcl, Scheme (guile?), sh, ... - Simply running a subprocess and looking at its stdout/exit code might be sufficient, though it could also be pretty slow if it's called often. - There are security issues about running remote code, at least if it's not running in the users own account. So we can either disallow it, or use some kind of sandbox system. - Python is a good language, but the syntax is not so good for giving small fragments on the command line. - Tcl is broken Lisp. - Lots of sysadmins know Perl, though Perl can give some bizarre or confusing errors. The built in stat operators and regexps might be useful. - Sadly probably not enough people know Scheme. - sh is hard to embed. Scripting hooks: - Whether to transfer a file - What basis file to use - Logging - Whether to allow transfers (for public servers) - Authentication - Locking - Cache - Generating backup path/name. - Post-processing of backups, e.g. to do compression. - After transfer, before replacement: so that we can spit out a diff of what was changed, or kick off some kind of reconciliation process. VFS: Rather than talking straight to the filesystem, rsyncd talks through an internal API. Samba has one. Is it useful? - Could be a tidy way to implement cached signatures. - Keep files compressed on disk? Interactive interface: - Something like ncFTP, or integration into GNOME-vfs. Probably hold a single socket connection open. - Can either call us as a separate process, or as a library. - The standalone process needs to produce output in a form easily digestible by a calling program, like the --emacs feature some have. Same goes for output: rpm outputs a series of hash symbols, which are easier for a GUI to handle than "\r30% complete" strings. - Yow! emacs support. (You could probably build that already, of course.) I'd like to be able to write a simple script on a remote machine that rsyncs it to my workstation, edits it there, then pushes it back up. Pie-in-the-sky features: These might have a severe impact on the protocol, and are not clearly in our core requirements. It looks like in many of them having scripting hooks will allow us - Transport over UDP multicast. The hard part is handling multiple destinations which have different basis files. We can look at multicast-TFTP for inspiration. - Conflict resolution. Possibly general scripting support will be sufficient. - Integrate with locking. It's hard to see a good general solution, because Unix systems have several locking mechanisms, and grabbing the lock from programs that don't expect it could cause deadlocks, timeouts, or other problems. Scripting support might help. - Replicate in place, rather than to a temporary file. This is dangerous in the case of interruption, and it also means that the delta can't refer to blocks that have already been overwritten. On the other hand we could semi-trivially do this at first by simply generating a delta with no copy instructions. - Replicate block devices. Most of the difficulties here are to do with replication in place, though on some systems we will also have to do I/O on block boundaries. - Peer to peer features. Flavour of the year. Can we think about ways for clients to smoothly and voluntarily become servers for content they receive? - Imagine a situation where the destination has a much faster link to the cloud than the source. In this case, Mojo Nation downloads interleaved blocks from several slower servers. The general situation might be a way for a master rsync process to farm out tasks to several subjobs. In this particular case they'd need different sockets. This might be related to multicast. Unlikely features: - Allow remote source and destination. If this can be cleanly designed into the protocol, perhaps with the remote machine acting as a kind of echo, then it's good. It's uncommon enough that we don't want to shape the whole protocol around it, though. In fact, in a triangle of machines there are two possibilities: all traffic passes from remote1 to remote2 through local, or local just sets up the transfer and then remote1 talks to remote2. FTP supports the second but it's not clearly good. There are some security problems with being able to instruct one machine to open a connection to another. In favour of evolving the protocol: - Keeping compatibility with existing rsync servers will help with adoption and testing. - We should at the very least be able to fall back to the new protocol. - Error handling is not so good. In favour of using a new protocol: - Maintaining compatibility might soak up development time that would better go into improving a new protocol. - If we start from scratch, it can be documented as we go, and we can avoid design decisions that make the protocol complex or implementation-bound. Error handling: - Errors should come back reliably, and be clearly associated with the particular file that caused the problem. - Some errors ought to cause the whole transfer to abort; some are just warnings. If any errors have occurred, then rsync ought to return an error. Concurrency: - We want to keep the CPU, filesystem, and network as full as possible as much of the time as possible. - We can do nonblocking network IO, but not so for disk. - It makes sense to on the destination be generating signatures and applying patches at the same time. - Can structure this with nonblocking, threads, separate processes, etc. Uses: - Mirroring software distributions: - Synchronizing laptop and desktop - NFS filesystem migration/replication. See http://www.ietf.org/proceedings/00jul/00july-133.htm#P24510_1276764 - Sync with PDA - Network backup systems - CVS filemover Conflict resolution: - Requires application-specific knowledge. We want to provide policy, rather than mechanism. - Possibly allowing two-way migration across a single connection would be useful. Moved files: - There's no trivial way to detect renamed files, especially if they move between directories. - If we had a picture of the remote directory from last time on either machine, then the inode numbers might give us a hint about files which may have been renamed. - Files that are renamed and not modified can be detected by examining the directory listing, looking for files with the same size/date as the origin. Filesystem migration: NFSv4 probably wants to migrate file locks, but that's not really our problem. Atomic updates: The NFSv4 working group wants atomic migration. Most of the responsibility for this lies on the NFS server or OS. If migrating a whole tree, then we could do a nearly-atomic rename at the end. This ties in to having separate basis and destination files. There's no way in Unix to replace a whole set of files atomically. However, if we get them all onto the destination machine and then do the updates quickly it would greatly reduce the window. Scalability: We should aim to work well on machines in use in a year or two. That probably means transfers of many millions of files in one batch, and gigabytes or terabytes of data. For argument's sake: at the low end, we want to sync ten files for a total of 10kb across a 1kB/s link. At the high end, we want to sync 1e9 files for 1TB of data across a 1GB/s link. On the whole CPU usage is not normally a limiting factor, if only because running over SSH burns a lot of cycles on encryption. Perhaps have resource throttling without relying on rlimit. Streaming: A big attraction of rsync is that there are few round-trip delays: basically only one to get started, and then everything is pipelined. This is a problem with FTP, and NFS (at least up to v3). NFSv4 can pipeline operations, but building on that is probably a bit complicated. Related work: - mirror.pl http://freshmeat.net/project/mirror/ - ProFTPd - Apache - http://freshmeat.net/search/?site=Freshmeat&q=mirror§ion=projects - BitTorrent -- p2p mirroring http://bitconjurer.org/BitTorrent/