#include <sys/time.h>
#endif
-#ifdef HAVE_WINSOCK2_H
-# include <winsock2.h>
-#endif
-
#include <glib.h>
-#include <stdio.h>
#include <time.h>
#ifdef __cplusplus
* what older versions of "libpcap" on Linux turn the Ethernet
* header for loopback interfaces into (0.6.0 and later versions
* leave the Ethernet header alone and make it DLT_EN10MB). */
-#define WTAP_ENCAP_PER_PACKET -1
-#define WTAP_ENCAP_UNKNOWN 0
-#define WTAP_ENCAP_ETHERNET 1
-#define WTAP_ENCAP_TOKEN_RING 2
-#define WTAP_ENCAP_SLIP 3
-#define WTAP_ENCAP_PPP 4
-#define WTAP_ENCAP_FDDI 5
-#define WTAP_ENCAP_FDDI_BITSWAPPED 6
-#define WTAP_ENCAP_RAW_IP 7
-#define WTAP_ENCAP_ARCNET 8
-#define WTAP_ENCAP_ARCNET_LINUX 9
-#define WTAP_ENCAP_ATM_RFC1483 10
-#define WTAP_ENCAP_LINUX_ATM_CLIP 11
-#define WTAP_ENCAP_LAPB 12
-#define WTAP_ENCAP_ATM_PDUS 13
-#define WTAP_ENCAP_ATM_PDUS_UNTRUNCATED 14
-#define WTAP_ENCAP_NULL 15
-#define WTAP_ENCAP_ASCEND 16
-#define WTAP_ENCAP_ISDN 17
-#define WTAP_ENCAP_IP_OVER_FC 18
-#define WTAP_ENCAP_PPP_WITH_PHDR 19
-#define WTAP_ENCAP_IEEE_802_11 20
-#define WTAP_ENCAP_PRISM_HEADER 21
-#define WTAP_ENCAP_IEEE_802_11_WITH_RADIO 22
-#define WTAP_ENCAP_IEEE_802_11_WLAN_RADIOTAP 23
-#define WTAP_ENCAP_IEEE_802_11_WLAN_AVS 24
-#define WTAP_ENCAP_SLL 25
-#define WTAP_ENCAP_FRELAY 26
-#define WTAP_ENCAP_FRELAY_WITH_PHDR 27
-#define WTAP_ENCAP_CHDLC 28
-#define WTAP_ENCAP_CISCO_IOS 29
-#define WTAP_ENCAP_LOCALTALK 30
-#define WTAP_ENCAP_OLD_PFLOG 31
-#define WTAP_ENCAP_HHDLC 32
-#define WTAP_ENCAP_DOCSIS 33
-#define WTAP_ENCAP_COSINE 34
-#define WTAP_ENCAP_WFLEET_HDLC 35
-#define WTAP_ENCAP_SDLC 36
-#define WTAP_ENCAP_TZSP 37
-#define WTAP_ENCAP_ENC 38
-#define WTAP_ENCAP_PFLOG 39
-#define WTAP_ENCAP_CHDLC_WITH_PHDR 40
-#define WTAP_ENCAP_BLUETOOTH_H4 41
-#define WTAP_ENCAP_MTP2 42
-#define WTAP_ENCAP_MTP3 43
-#define WTAP_ENCAP_IRDA 44
-#define WTAP_ENCAP_USER0 45
-#define WTAP_ENCAP_USER1 46
-#define WTAP_ENCAP_USER2 47
-#define WTAP_ENCAP_USER3 48
-#define WTAP_ENCAP_USER4 49
-#define WTAP_ENCAP_USER5 50
-#define WTAP_ENCAP_USER6 51
-#define WTAP_ENCAP_USER7 52
-#define WTAP_ENCAP_USER8 53
-#define WTAP_ENCAP_USER9 54
-#define WTAP_ENCAP_USER10 55
-#define WTAP_ENCAP_USER11 56
-#define WTAP_ENCAP_USER12 57
-#define WTAP_ENCAP_USER13 58
-#define WTAP_ENCAP_USER14 59
-#define WTAP_ENCAP_USER15 60
-#define WTAP_ENCAP_SYMANTEC 61
-#define WTAP_ENCAP_APPLE_IP_OVER_IEEE1394 62
-#define WTAP_ENCAP_BACNET_MS_TP 63
-#define WTAP_ENCAP_NETTL_RAW_ICMP 64
-#define WTAP_ENCAP_NETTL_RAW_ICMPV6 65
-#define WTAP_ENCAP_GPRS_LLC 66
-#define WTAP_ENCAP_JUNIPER_ATM1 67
-#define WTAP_ENCAP_JUNIPER_ATM2 68
-#define WTAP_ENCAP_REDBACK 69
-#define WTAP_ENCAP_NETTL_RAW_IP 70
-#define WTAP_ENCAP_NETTL_ETHERNET 71
-#define WTAP_ENCAP_NETTL_TOKEN_RING 72
-#define WTAP_ENCAP_NETTL_FDDI 73
-#define WTAP_ENCAP_NETTL_UNKNOWN 74
-#define WTAP_ENCAP_MTP2_WITH_PHDR 75
-#define WTAP_ENCAP_JUNIPER_PPPOE 76
-#define WTAP_GCOM_TIE1 77
-#define WTAP_GCOM_SERIAL 78
-#define WTAP_ENCAP_NETTL_X25 79
-#define WTAP_ENCAP_K12 80
-#define WTAP_ENCAP_JUNIPER_MLPPP 81
-#define WTAP_ENCAP_JUNIPER_MLFR 82
-#define WTAP_ENCAP_JUNIPER_ETHER 83
-#define WTAP_ENCAP_JUNIPER_PPP 84
-#define WTAP_ENCAP_JUNIPER_FRELAY 85
-#define WTAP_ENCAP_JUNIPER_CHDLC 86
-#define WTAP_ENCAP_JUNIPER_GGSN 87
-#define WTAP_ENCAP_LINUX_LAPD 88
-#define WTAP_ENCAP_CATAPULT_DCT2000 89
-#define WTAP_ENCAP_BER 90
-#define WTAP_ENCAP_JUNIPER_VP 91
-#define WTAP_ENCAP_USB 92
-#define WTAP_ENCAP_IEEE802_16_MAC_CPS 93
-#define WTAP_ENCAP_NETTL_RAW_TELNET 94
-#define WTAP_ENCAP_USB_LINUX 95
-#define WTAP_ENCAP_MPEG 96
-#define WTAP_ENCAP_PPI 97
-#define WTAP_ENCAP_ERF 98
+#define WTAP_ENCAP_PER_PACKET -1
+#define WTAP_ENCAP_UNKNOWN 0
+#define WTAP_ENCAP_ETHERNET 1
+#define WTAP_ENCAP_TOKEN_RING 2
+#define WTAP_ENCAP_SLIP 3
+#define WTAP_ENCAP_PPP 4
+#define WTAP_ENCAP_FDDI 5
+#define WTAP_ENCAP_FDDI_BITSWAPPED 6
+#define WTAP_ENCAP_RAW_IP 7
+#define WTAP_ENCAP_ARCNET 8
+#define WTAP_ENCAP_ARCNET_LINUX 9
+#define WTAP_ENCAP_ATM_RFC1483 10
+#define WTAP_ENCAP_LINUX_ATM_CLIP 11
+#define WTAP_ENCAP_LAPB 12
+#define WTAP_ENCAP_ATM_PDUS 13
+#define WTAP_ENCAP_ATM_PDUS_UNTRUNCATED 14
+#define WTAP_ENCAP_NULL 15
+#define WTAP_ENCAP_ASCEND 16
+#define WTAP_ENCAP_ISDN 17
+#define WTAP_ENCAP_IP_OVER_FC 18
+#define WTAP_ENCAP_PPP_WITH_PHDR 19
+#define WTAP_ENCAP_IEEE_802_11 20
+#define WTAP_ENCAP_PRISM_HEADER 21
+#define WTAP_ENCAP_IEEE_802_11_WITH_RADIO 22
+#define WTAP_ENCAP_IEEE_802_11_WLAN_RADIOTAP 23
+#define WTAP_ENCAP_IEEE_802_11_WLAN_AVS 24
+#define WTAP_ENCAP_SLL 25
+#define WTAP_ENCAP_FRELAY 26
+#define WTAP_ENCAP_FRELAY_WITH_PHDR 27
+#define WTAP_ENCAP_CHDLC 28
+#define WTAP_ENCAP_CISCO_IOS 29
+#define WTAP_ENCAP_LOCALTALK 30
+#define WTAP_ENCAP_OLD_PFLOG 31
+#define WTAP_ENCAP_HHDLC 32
+#define WTAP_ENCAP_DOCSIS 33
+#define WTAP_ENCAP_COSINE 34
+#define WTAP_ENCAP_WFLEET_HDLC 35
+#define WTAP_ENCAP_SDLC 36
+#define WTAP_ENCAP_TZSP 37
+#define WTAP_ENCAP_ENC 38
+#define WTAP_ENCAP_PFLOG 39
+#define WTAP_ENCAP_CHDLC_WITH_PHDR 40
+#define WTAP_ENCAP_BLUETOOTH_H4 41
+#define WTAP_ENCAP_MTP2 42
+#define WTAP_ENCAP_MTP3 43
+#define WTAP_ENCAP_IRDA 44
+#define WTAP_ENCAP_USER0 45
+#define WTAP_ENCAP_USER1 46
+#define WTAP_ENCAP_USER2 47
+#define WTAP_ENCAP_USER3 48
+#define WTAP_ENCAP_USER4 49
+#define WTAP_ENCAP_USER5 50
+#define WTAP_ENCAP_USER6 51
+#define WTAP_ENCAP_USER7 52
+#define WTAP_ENCAP_USER8 53
+#define WTAP_ENCAP_USER9 54
+#define WTAP_ENCAP_USER10 55
+#define WTAP_ENCAP_USER11 56
+#define WTAP_ENCAP_USER12 57
+#define WTAP_ENCAP_USER13 58
+#define WTAP_ENCAP_USER14 59
+#define WTAP_ENCAP_USER15 60
+#define WTAP_ENCAP_SYMANTEC 61
+#define WTAP_ENCAP_APPLE_IP_OVER_IEEE1394 62
+#define WTAP_ENCAP_BACNET_MS_TP 63
+#define WTAP_ENCAP_NETTL_RAW_ICMP 64
+#define WTAP_ENCAP_NETTL_RAW_ICMPV6 65
+#define WTAP_ENCAP_GPRS_LLC 66
+#define WTAP_ENCAP_JUNIPER_ATM1 67
+#define WTAP_ENCAP_JUNIPER_ATM2 68
+#define WTAP_ENCAP_REDBACK 69
+#define WTAP_ENCAP_NETTL_RAW_IP 70
+#define WTAP_ENCAP_NETTL_ETHERNET 71
+#define WTAP_ENCAP_NETTL_TOKEN_RING 72
+#define WTAP_ENCAP_NETTL_FDDI 73
+#define WTAP_ENCAP_NETTL_UNKNOWN 74
+#define WTAP_ENCAP_MTP2_WITH_PHDR 75
+#define WTAP_ENCAP_JUNIPER_PPPOE 76
+#define WTAP_ENCAP_GCOM_TIE1 77
+#define WTAP_ENCAP_GCOM_SERIAL 78
+#define WTAP_ENCAP_NETTL_X25 79
+#define WTAP_ENCAP_K12 80
+#define WTAP_ENCAP_JUNIPER_MLPPP 81
+#define WTAP_ENCAP_JUNIPER_MLFR 82
+#define WTAP_ENCAP_JUNIPER_ETHER 83
+#define WTAP_ENCAP_JUNIPER_PPP 84
+#define WTAP_ENCAP_JUNIPER_FRELAY 85
+#define WTAP_ENCAP_JUNIPER_CHDLC 86
+#define WTAP_ENCAP_JUNIPER_GGSN 87
+#define WTAP_ENCAP_LINUX_LAPD 88
+#define WTAP_ENCAP_CATAPULT_DCT2000 89
+#define WTAP_ENCAP_BER 90
+#define WTAP_ENCAP_JUNIPER_VP 91
+#define WTAP_ENCAP_USB 92
+#define WTAP_ENCAP_IEEE802_16_MAC_CPS 93
+#define WTAP_ENCAP_NETTL_RAW_TELNET 94
+#define WTAP_ENCAP_USB_LINUX 95
+#define WTAP_ENCAP_MPEG 96
+#define WTAP_ENCAP_PPI 97
+#define WTAP_ENCAP_ERF 98
#define WTAP_ENCAP_BLUETOOTH_H4_WITH_PHDR 99
-#define WTAP_ENCAP_SITA 100
-
-
-#define WTAP_NUM_ENCAP_TYPES wtap_get_num_encap_types()
+#define WTAP_ENCAP_SITA 100
+#define WTAP_ENCAP_SCCP 101
+#define WTAP_ENCAP_BLUETOOTH_HCI 102 /*raw packets without a transport layer header e.g. H4*/
+#define WTAP_ENCAP_IPMB 103
+#define WTAP_ENCAP_IEEE802_15_4 104
+#define WTAP_ENCAP_X2E_XORAYA 105
+#define WTAP_ENCAP_FLEXRAY 106
+#define WTAP_ENCAP_LIN 107
+#define WTAP_ENCAP_MOST 108
+#define WTAP_ENCAP_CAN20B 109
+#define WTAP_ENCAP_LAYER1_EVENT 110
+#define WTAP_ENCAP_X2E_SERIAL 111
+#define WTAP_ENCAP_I2C 112
+#define WTAP_ENCAP_IEEE802_15_4_NONASK_PHY 113
+#define WTAP_ENCAP_TNEF 114
+#define WTAP_ENCAP_USB_LINUX_MMAPPED 115
+#define WTAP_ENCAP_GSM_UM 116
+#define WTAP_ENCAP_DPNSS 117
+#define WTAP_ENCAP_PACKETLOGGER 118
+#define WTAP_ENCAP_NSTRACE_1_0 119
+#define WTAP_ENCAP_NSTRACE_2_0 120
+#define WTAP_ENCAP_FIBRE_CHANNEL_FC2 121
+#define WTAP_ENCAP_FIBRE_CHANNEL_FC2_WITH_FRAME_DELIMS 122
+#define WTAP_ENCAP_JPEG_JFIF 123 /* obsoleted by WTAP_ENCAP_MIME*/
+#define WTAP_ENCAP_IPNET 124
+#define WTAP_ENCAP_SOCKETCAN 125
+#define WTAP_ENCAP_IEEE802_11_NETMON_RADIO 126
+#define WTAP_ENCAP_IEEE802_15_4_NOFCS 127
+#define WTAP_ENCAP_RAW_IPFIX 128
+#define WTAP_ENCAP_RAW_IP4 129
+#define WTAP_ENCAP_RAW_IP6 130
+#define WTAP_ENCAP_LAPD 131
+#define WTAP_ENCAP_DVBCI 132
+#define WTAP_ENCAP_MUX27010 133
+#define WTAP_ENCAP_MIME 134
+#define WTAP_ENCAP_NETANALYZER 135
+#define WTAP_ENCAP_NETANALYZER_TRANSPARENT 136
+#define WTAP_ENCAP_IP_OVER_IB 137
+#define WTAP_ENCAP_MPEG_2_TS 138
+
+#define WTAP_NUM_ENCAP_TYPES wtap_get_num_encap_types()
/* File types that can be read by wiretap.
We support writing some many of these file types, too, so we
distinguish between different versions of them. */
-#define WTAP_FILE_UNKNOWN 0
-#define WTAP_FILE_WTAP 1
-#define WTAP_FILE_PCAP 2
-#define WTAP_FILE_PCAP_NSEC 3
-#define WTAP_FILE_PCAP_AIX 4
-#define WTAP_FILE_PCAP_SS991029 5
-#define WTAP_FILE_PCAP_NOKIA 6
-#define WTAP_FILE_PCAP_SS990417 7
-#define WTAP_FILE_PCAP_SS990915 8
-#define WTAP_FILE_5VIEWS 9
-#define WTAP_FILE_IPTRACE_1_0 10
-#define WTAP_FILE_IPTRACE_2_0 11
-#define WTAP_FILE_BER 12
-#define WTAP_FILE_HCIDUMP 13
-#define WTAP_FILE_CATAPULT_DCT2000 14
-#define WTAP_FILE_NETXRAY_OLD 15
-#define WTAP_FILE_NETXRAY_1_0 16
-#define WTAP_FILE_COSINE 17
-#define WTAP_FILE_CSIDS 18
-#define WTAP_FILE_DBS_ETHERWATCH 19
-#define WTAP_FILE_ERF 20
-#define WTAP_FILE_EYESDN 21
-#define WTAP_FILE_NETTL 22
-#define WTAP_FILE_ISERIES 23
-#define WTAP_FILE_ISERIES_UNICODE 24
-#define WTAP_FILE_I4BTRACE 25
-#define WTAP_FILE_ASCEND 26
-#define WTAP_FILE_NETMON_1_x 27
-#define WTAP_FILE_NETMON_2_x 28
-#define WTAP_FILE_NGSNIFFER_UNCOMPRESSED 29
-#define WTAP_FILE_NGSNIFFER_COMPRESSED 30
-#define WTAP_FILE_NETXRAY_1_1 31
-#define WTAP_FILE_NETXRAY_2_00x 32
-#define WTAP_FILE_NETWORK_INSTRUMENTS_V9 33
-#define WTAP_FILE_LANALYZER 34
-#define WTAP_FILE_PPPDUMP 35
-#define WTAP_FILE_RADCOM 36
-#define WTAP_FILE_SNOOP 37
-#define WTAP_FILE_SHOMITI 38
-#define WTAP_FILE_VMS 39
-#define WTAP_FILE_K12 40
-#define WTAP_FILE_TOSHIBA 41
-#define WTAP_FILE_VISUAL_NETWORKS 42
-#define WTAP_FILE_ETHERPEEK_V56 43
-#define WTAP_FILE_ETHERPEEK_V7 44
-#define WTAP_FILE_AIROPEEK_V9 45
-#define WTAP_FILE_MPEG 46
-#define WTAP_FILE_K12TEXT 47
-#define WTAP_FILE_NETSCREEN 48
-#define WTAP_FILE_COMMVIEW 49
-#define WTAP_FILE_PCAPNG 50
-
-#define WTAP_NUM_FILE_TYPES wtap_get_num_file_types()
+#define WTAP_FILE_UNKNOWN 0
+#define WTAP_FILE_PCAP 1
+#define WTAP_FILE_PCAPNG 2
+#define WTAP_FILE_PCAP_NSEC 3
+#define WTAP_FILE_PCAP_AIX 4
+#define WTAP_FILE_PCAP_SS991029 5
+#define WTAP_FILE_PCAP_NOKIA 6
+#define WTAP_FILE_PCAP_SS990417 7
+#define WTAP_FILE_PCAP_SS990915 8
+#define WTAP_FILE_5VIEWS 9
+#define WTAP_FILE_IPTRACE_1_0 10
+#define WTAP_FILE_IPTRACE_2_0 11
+#define WTAP_FILE_BER 12
+#define WTAP_FILE_HCIDUMP 13
+#define WTAP_FILE_CATAPULT_DCT2000 14
+#define WTAP_FILE_NETXRAY_OLD 15
+#define WTAP_FILE_NETXRAY_1_0 16
+#define WTAP_FILE_COSINE 17
+#define WTAP_FILE_CSIDS 18
+#define WTAP_FILE_DBS_ETHERWATCH 19
+#define WTAP_FILE_ERF 20
+#define WTAP_FILE_EYESDN 21
+#define WTAP_FILE_NETTL 22
+#define WTAP_FILE_ISERIES 23
+#define WTAP_FILE_ISERIES_UNICODE 24
+#define WTAP_FILE_I4BTRACE 25
+#define WTAP_FILE_ASCEND 26
+#define WTAP_FILE_NETMON_1_x 27
+#define WTAP_FILE_NETMON_2_x 28
+#define WTAP_FILE_NGSNIFFER_UNCOMPRESSED 29
+#define WTAP_FILE_NGSNIFFER_COMPRESSED 30
+#define WTAP_FILE_NETXRAY_1_1 31
+#define WTAP_FILE_NETXRAY_2_00x 32
+#define WTAP_FILE_NETWORK_INSTRUMENTS 33
+#define WTAP_FILE_LANALYZER 34
+#define WTAP_FILE_PPPDUMP 35
+#define WTAP_FILE_RADCOM 36
+#define WTAP_FILE_SNOOP 37
+#define WTAP_FILE_SHOMITI 38
+#define WTAP_FILE_VMS 39
+#define WTAP_FILE_K12 40
+#define WTAP_FILE_TOSHIBA 41
+#define WTAP_FILE_VISUAL_NETWORKS 42
+#define WTAP_FILE_ETHERPEEK_V56 43
+#define WTAP_FILE_ETHERPEEK_V7 44
+#define WTAP_FILE_AIROPEEK_V9 45
+#define WTAP_FILE_MPEG 46
+#define WTAP_FILE_K12TEXT 47
+#define WTAP_FILE_NETSCREEN 48
+#define WTAP_FILE_COMMVIEW 49
+#define WTAP_FILE_BTSNOOP 50
+#define WTAP_FILE_TNEF 51
+#define WTAP_FILE_DCT3TRACE 52
+#define WTAP_FILE_PACKETLOGGER 53
+#define WTAP_FILE_DAINTREE_SNA 54
+#define WTAP_FILE_NETSCALER_1_0 55
+#define WTAP_FILE_NETSCALER_2_0 56
+#define WTAP_FILE_JPEG_JFIF 57 /* obsoleted by WTAP_FILE_MIME */
+#define WTAP_FILE_IPFIX 58
+#define WTAP_FILE_MIME 59
+#define WTAP_FILE_AETHRA 60
+
+#define WTAP_NUM_FILE_TYPES wtap_get_num_file_types()
/* timestamp precision (currently only these values are supported) */
#define WTAP_FILE_TSPREC_SEC 0
/*
* Maximum packet size we'll support.
- * It must be at least 65535.
+ * 65535 is the largest snapshot length that libpcap supports, so we
+ * use that.
*/
#define WTAP_MAX_PACKET_SIZE 65535
* of that.
*/
+
+struct nstr_phdr {
+ gint64 rec_offset;
+ gint32 rec_len;
+ guint8 nicno_offset;
+ guint8 nicno_len;
+ guint8 dir_offset;
+ guint8 dir_len;
+ guint8 eth_offset;
+ guint8 pcb_offset;
+ guint8 l_pcb_offset;
+ guint8 rec_type;
+ guint8 vlantag_offset;
+ guint8 coreid_offset;
+};
+
/* Packet "pseudo-header" information for Ethernet capture files. */
struct eth_phdr {
gint fcs_len; /* Number of bytes of FCS - -1 means "unknown" */
* Status bits.
*/
#define ATM_RAW_CELL 0x01 /* TRUE if the packet is a single cell */
+#define ATM_NO_HEC 0x02 /* TRUE if the cell has HEC stripped out */
+#define ATM_AAL2_NOPHDR 0x04 /* TRUE if the AAL2 PDU has no pseudo-header */
/*
* AAL types.
#define TRAF_SPANS 6 /* FORE SPANS */
#define TRAF_IPSILON 7 /* Ipsilon */
#define TRAF_UMTS_FP 8 /* UMTS Frame Protocol */
+#define TRAF_GPRS_NS 9 /* GPRS Network Services */
+#define TRAF_SSCOP 10 /* SSCOP */
/*
* Traffic subtypes.
guint32 task; /* Task number */
};
+/* Also defined in epan/packet_info.h */
+#define P2P_DIR_UNKNOWN -1
+#define P2P_DIR_SENT 0
+#define P2P_DIR_RECV 1
+
/* Packet "pseudo-header" for point-to-point links with direction flags. */
struct p2p_phdr {
- gboolean sent; /* TRUE=sent, FALSE=received */
+ int sent; /* TRUE=sent, FALSE=received, -1=unknown*/
};
/*
const gchar* stack_file;
guint32 input_type;
k12_input_info_t input_info;
- gchar* extra_info;
+ guint8* extra_info;
guint32 extra_length;
void* stuff;
};
struct wtap *wth;
};
-/*
- * possible event type
- */
-#define URB_SUBMIT 'S'
-#define URB_COMPLETE 'C'
-#define URB_ERROR 'E'
+#define LIBPCAP_BT_PHDR_SENT 0
+#define LIBPCAP_BT_PHDR_RECV 1
/*
- * possible transfer mode
- */
-#define URB_ISOCHRONOUS 0x0
-#define URB_INTERRUPT 0x1
-#define URB_CONTROL 0x2
-#define URB_BULK 0x3
-
-#define URB_TRANSFER_IN 0x80 /* to host */
-
-/*
- * USB setup header as defined in USB specification
+ * Header prepended by libpcap to each bluetooth hci h:4 frame.
+ * Values in network byte order
*/
-struct usb_request_hdr {
- gint8 bmRequestType;
- guint8 bRequest;
- guint16 wValue;
- guint16 wIndex;
- guint16 wLength;
+struct libpcap_bt_phdr {
+ guint32 direction; /* Bit 0 hold the frame direction. */
};
-/*
- * Header prepended by Linux kernel to each USB event.
- * Followed by a struct usb_request_hdr, although that header is valid
- * only if setup_flag is 0.
- * (Setup flag is '-', 'D', 'Z', or 0. Data flag is '<', '>', 'Z', or 0.)
- *
- * We present this as a pseudo-header; the values are in host byte order.
- */
-struct linux_usb_phdr {
- guint64 id; /* urb id, to link submission and completion events*/
- guint8 event_type; /* Submit ('S'), Completed ('C'), Error ('E') */
- guint8 transfer_type; /* ISO (0), Intr, Control, Bulk (3) */
- guint8 endpoint_number; /* Endpoint number (0-15) and transfer direction */
- guint8 device_address; /* 0-127 */
- guint16 bus_id;
- gint8 setup_flag; /*if !=0 the urb setup header is not present*/
- gint8 data_flag; /*if !=0 no urb data is present*/
- gint64 ts_sec;
- gint32 ts_usec;
- gint32 status;
- guint32 urb_len; /* whole len of urb this event refers to */
- guint32 data_len; /* amount of urb data really present in this event*/
-};
+#define LIBPCAP_PPP_PHDR_RECV 0
+#define LIBPCAP_PPP_PHDR_SENT 1
/*
- * Header prepended by libpcap to each bluetooth hci h:4 frame.
- * Values in network byte order
+ * Header prepended by libpcap to each ppp frame.
*/
-struct libpcap_bt_phdr {
- guint32 direction; /* Bit 0 hold the frame direction. */
+struct libpcap_ppp_phdr {
+ guint8 direction;
};
/*
guint16 wlen;
};
+struct erf_ehdr {
+ guint64 ehdr;
+};
+
/*
* ERF pseudo header with optional subheader
* (Multichannel or Ethernet)
*/
+
+#define MAX_ERF_EHDR 8
+
struct erf_mc_phdr {
struct erf_phdr phdr;
+ struct erf_ehdr ehdr_list[MAX_ERF_EHDR];
union
{
guint16 eth_hdr;
#define SITA_PROTO_BOP_FRL (0x12)
struct sita_phdr {
- guint8 flags;
- guint8 signals;
- guint8 errors1;
- guint8 errors2;
- guint8 proto;
+ guint8 sita_flags;
+ guint8 sita_signals;
+ guint8 sita_errors1;
+ guint8 sita_errors2;
+ guint8 sita_proto;
+};
+
+/*pseudo header for Bluetooth HCI*/
+struct bthci_phdr {
+ gboolean sent;
+ guint8 channel;
+};
+
+#define BTHCI_CHANNEL_COMMAND 1
+#define BTHCI_CHANNEL_ACL 2
+#define BTHCI_CHANNEL_SCO 3
+#define BTHCI_CHANNEL_EVENT 4
+
+/* pseudo header for WTAP_ENCAP_LAYER1_EVENT */
+struct l1event_phdr {
+ gboolean uton;
+};
+
+/* * I2C pseudo header */
+struct i2c_phdr {
+ guint8 is_event;
+ guint8 bus;
+ guint32 flags;
};
+/* pseudo header for WTAP_ENCAP_GSM_UM */
+struct gsm_um_phdr {
+ gboolean uplink;
+ guint8 channel;
+ /* The following are only populated for downlink */
+ guint8 bsic;
+ guint16 arfcn;
+ guint32 tdma_frame;
+ guint8 error;
+ guint16 timeshift;
+};
+
+#define GSM_UM_CHANNEL_UNKNOWN 0
+#define GSM_UM_CHANNEL_BCCH 1
+#define GSM_UM_CHANNEL_SDCCH 2
+#define GSM_UM_CHANNEL_SACCH 3
+#define GSM_UM_CHANNEL_FACCH 4
+#define GSM_UM_CHANNEL_CCCH 5
+#define GSM_UM_CHANNEL_RACH 6
+#define GSM_UM_CHANNEL_AGCH 7
+#define GSM_UM_CHANNEL_PCH 8
union wtap_pseudo_header {
struct eth_phdr eth;
struct cosine_phdr cosine;
struct irda_phdr irda;
struct nettl_phdr nettl;
- struct mtp2_phdr mtp2;
+ struct mtp2_phdr mtp2;
struct k12_phdr k12;
struct lapd_phdr lapd;
struct catapult_dct2000_phdr dct2000;
- struct linux_usb_phdr linux_usb;
- struct erf_mc_phdr erf;
+ struct erf_mc_phdr erf;
struct sita_phdr sita;
+ struct bthci_phdr bthci;
+ struct l1event_phdr l1event;
+ struct i2c_phdr i2c;
+ struct gsm_um_phdr gsm_um;
+ struct nstr_phdr nstr;
};
struct wtap_nstime {
};
struct wtap_pkthdr {
- struct wtap_nstime ts;
- guint32 caplen;
- guint32 len;
- int pkt_encap;
+ guint32 presence_flags; /* what stuff do we have? */
+ struct wtap_nstime ts;
+ guint32 caplen; /* data length in the file */
+ guint32 len; /* data length on the wire */
+ int pkt_encap;
+ /* pcapng variables */
+ guint32 interface_id; /* identifier of the interface. */
+ /* options */
+ gchar *opt_comment; /* NULL if not available */
+ guint64 drop_count; /* number of packets lost (by the interface and the operating system) between this packet and the preceding one. */
+ guint32 pack_flags; /* XXX - 0 for now (any value for "we don't have it"?) */
};
-struct wtap;
+/*
+ * Bits in presence_flags, indicating which of the fields we have.
+ *
+ * For the time stamp, we may need some more flags to indicate
+ * whether the time stamp is an absolute date-and-time stamp, an
+ * absolute time-only stamp (which can make relative time
+ * calculations tricky, as you could in theory have two time
+ * stamps separated by an unknown number of days), or a time stamp
+ * relative to some unspecified time in the past (see mpeg.c).
+ *
+ * There is no presence flag for len - there has to be *some* length
+ * value for the packet. (The "captured length" can be missing if
+ * the file format doesn't report a captured length distinct from
+ * the on-the-network length because the application(s) producing those
+ * files don't support slicing packets.)
+ *
+ * There could be a presence flag for the packet encapsulation - if it's
+ * absent, use the file encapsulation - but it's not clear that's useful;
+ * we currently do that in the module for the file format.
+ */
+#define WTAP_HAS_TS 0x00000001 /* time stamp */
+#define WTAP_HAS_CAP_LEN 0x00000002 /* captured length separate from on-the-network length */
+#define WTAP_HAS_INTERFACE_ID 0x00000004 /* interface ID */
+#define WTAP_HAS_COMMENTS 0x00000008 /* comments */
+#define WTAP_HAS_DROP_COUNT 0x00000010 /* drop count */
+#define WTAP_HAS_PACK_FLAGS 0x00000020 /* packet flags */
+
+/**
+ * Holds the option strings from pcapng:s Section Header block(SHB).
+ */
+typedef struct wtapng_section_s {
+ /* mandatory */
+ guint64 section_length;
+ /* options */
+ gchar *opt_comment; /* NULL if not available */
+ gchar *shb_hardware; /* NULL if not available, UTF-8 string containing the description of the hardware used to create this section. */
+ gchar *shb_os; /* NULL if not available, UTF-8 string containing the name of the operating system used to create this section. */
+ gchar *shb_user_appl; /* NULL if not available, UTF-8 string containing the name of the application used to create this section. */
+} wtapng_section_t;
+
+
+/** struct holding the information to build IDB:s
+ * the interface_data array holds an array of wtapng_if_descr_t
+ * one per interface.
+ */
+typedef struct wtapng_iface_descriptions_s {
+ guint number_of_interfaces;
+ GArray *interface_data;
+} wtapng_iface_descriptions_t;
+
+/* Interface Description
+ *
+ * Options:
+ * if_name 2 A UTF-8 string containing the name of the device used to capture data. "eth0" / "\Device\NPF_{AD1CE675-96D0-47C5-ADD0-2504B9126B68}" / ...
+ * if_description 3 A UTF-8 string containing the description of the device used to capture data. "Broadcom NetXtreme" / "First Ethernet Interface" / ...
+ * if_IPv4addr 4 Interface network address and netmask. This option can be repeated multiple times within the same Interface Description Block when multiple IPv4 addresses are assigned to the interface. 192 168 1 1 255 255 255 0
+ * if_IPv6addr 5 Interface network address and prefix length (stored in the last byte). This option can be repeated multiple times within the same Interface Description Block when multiple IPv6 addresses are assigned to the interface. 2001:0db8:85a3:08d3:1319:8a2e:0370:7344/64 is written (in hex) as "20 01 0d b8 85 a3 08 d3 13 19 8a 2e 03 70 73 44 40"
+ * if_MACaddr 6 Interface Hardware MAC address (48 bits). 00 01 02 03 04 05
+ * if_EUIaddr 7 Interface Hardware EUI address (64 bits), if available. TODO: give a good example
+ * if_speed 8 Interface speed (in bps). 100000000 for 100Mbps
+ * if_tsresol 9 Resolution of timestamps. If the Most Significant Bit is equal to zero, the remaining bits indicates the resolution of the timestamp as as a negative power of 10 (e.g. 6 means microsecond resolution, timestamps are the number of microseconds since 1/1/1970). If the Most Significant Bit is equal to one, the remaining bits indicates the resolution as as negative power of 2 (e.g. 10 means 1/1024 of second). If this option is not present, a resolution of 10^-6 is assumed (i.e. timestamps have the same resolution of the standard 'libpcap' timestamps). 6
+ * if_tzone 10 Time zone for GMT support (TODO: specify better). TODO: give a good example
+ * if_filter 11 The filter (e.g. "capture only TCP traffic") used to capture traffic. The first byte of the Option Data keeps a code of the filter used (e.g. if this is a libpcap string, or BPF bytecode, and more). More details about this format will be presented in Appendix XXX (TODO). (TODO: better use different options for different fields? e.g. if_filter_pcap, if_filter_bpf, ...) 00 "tcp port 23 and host 10.0.0.5"
+ * if_os 12 A UTF-8 string containing the name of the operating system of the machine in which this interface is installed. This can be different from the same information that can be contained by the Section Header Block (Section 3.1 (Section Header Block (mandatory))) because the capture can have been done on a remote machine. "Windows XP SP2" / "openSUSE 10.2" / ...
+ * if_fcslen 13 An integer value that specified the length of the Frame Check Sequence (in bits) for this interface. For link layers whose FCS length can change during time, the Packet Block Flags Word can be used (see Appendix A (Packet Block Flags Word)). 4
+ * if_tsoffset 14 A 64 bits integer value that specifies an offset (in seconds) that must be added to the timestamp of each packet to obtain the absolute timestamp of a packet. If the option is missing, the timestamps stored in the packet must be considered absolute timestamps. The time zone of the offset can be specified with the option if_tzone. TODO: won't a if_tsoffset_low for fractional second offsets be useful for highly syncronized capture systems? 1234
+ */
+/**
+ * Interface description data
+ */
+typedef struct wtapng_if_descr_s {
+ int wtap_encap; /**< link_type translated to wtap_encap */
+ guint64 time_units_per_second;
+ /* mandatory */
+ guint16 link_type;
+ guint32 snap_len;
+ /* options */
+ gchar *opt_comment; /**< NULL if not available */
+ gchar *if_name; /**< NULL if not available, opt 2 A UTF-8 string containing the name of the device used to capture data. */
+ gchar *if_description;/**< NULL if not available, opt 3 A UTF-8 string containing the description of the device used to capture data. */
+ /* XXX: if_IPv4addr opt 4 Interface network address and netmask.*/
+ /* XXX: if_IPv6addr opt 5 Interface network address and prefix length (stored in the last byte).*/
+ /* XXX: if_MACaddr opt 6 Interface Hardware MAC address (48 bits).*/
+ /* XXX: if_EUIaddr opt 7 Interface Hardware EUI address (64 bits)*/
+ guint64 if_speed; /**< 0xFFFFFFFF if unknown, opt 8 Interface speed (in bps). 100000000 for 100Mbps */
+ guint8 if_tsresol; /**< default is 6 for microsecond resolution, opt 9 Resolution of timestamps.
+ * If the Most Significant Bit is equal to zero, the remaining bits indicates the resolution of the timestamp as as a negative power of 10
+ */
+ /* XXX: if_tzone 10 Time zone for GMT support (TODO: specify better). */
+ gchar *if_filter; /**< NULL if not available, opt 11 The filter (e.g. "capture only TCP traffic") used to capture traffic.
+ * The first byte of the Option Data keeps a code of the filter used (e.g. if this is a libpcap string, or BPF bytecode, and more).
+ */
+ gchar *if_os; /**< NULL if not available, 12 A UTF-8 string containing the name of the operating system of the machine in which this interface is installed. */
+ gint8 if_fcslen; /**< -1 if unknown or changes between packets, opt 13 An integer value that specified the length of the Frame Check Sequence (in bits) for this interface. */
+ /* XXX: guint64 if_tsoffset; opt 14 A 64 bits integer value that specifies an offset (in seconds)...*/
+} wtapng_if_descr_t;
+
struct Buffer;
struct wtap_dumper;
typedef struct wtap wtap;
typedef struct wtap_dumper wtap_dumper;
+typedef struct wtap_reader *FILE_T;
+
struct file_type_info {
/* the file type name */
/* should be NULL for all "pseudo" types that are only internally used and not read/writeable */
- const char *name;
+ const char *name;
/* the file type short name, used as a shortcut for the command line tools */
/* should be NULL for all "pseudo" types that are only internally used and not read/writeable */
- const char *short_name;
-
- /* the common file extensions for this type (seperated by semicolon) */
- /* should be *.* if no common extension is applicable */
- const char *file_extensions;
+ const char *short_name;
/* the default file extension, used to save this type */
/* should be NULL if no default extension is known */
- const char *file_extension_default;
+ const char *default_file_extension;
+
+ /* a semicolon-separated list of additional file extensions */
+ /* used for this type */
+ /* should be NULL if no extensions, or no extensions other */
+ /* than the default extension, are known */
+ const char *additional_file_extensions;
+
+ /* when writing this file format, is seeking required? */
+ gboolean writing_must_seek;
- /* can this type be compressed with gzip? */
- gboolean can_compress;
+ /* does this type support name resolution records? */
+ /* should be FALSE is this file type doesn't support name resolution records */
+ gboolean has_name_resolution;
/* can this type write this encapsulation format? */
- /* should be NULL is this file type don't have write support */
- int (*can_write_encap)(int);
+ /* should be NULL is this file type doesn't have write support */
+ int (*can_write_encap)(int);
/* the function to open the capture file for writing */
/* should be NULL is this file type don't have write support */
- int (*dump_open)(wtap_dumper *, gboolean, int *);
+ int (*dump_open)(wtap_dumper *, int *);
};
typedef int (*wtap_open_routine_t)(struct wtap*, int *, char **);
-/*
- * On failure, "wtap_open_offline()" returns NULL, and puts into the
+/** On failure, "wtap_open_offline()" returns NULL, and puts into the
* "int" pointed to by its second argument:
*
- * a positive "errno" value if the capture file can't be opened;
+ * @param filename Name of the file to open
+ * @param err a positive "errno" value if the capture file can't be opened;
* a negative number, indicating the type of error, on other failures.
+ * @param err_info for some errors, a string giving more details of
+ * the error
+ * @param do_random TRUE if random access to the file will be done,
+ * FALSE if not
*/
struct wtap* wtap_open_offline(const char *filename, int *err,
gchar **err_info, gboolean do_random);
+/*
+ * If we were compiled with zlib and we're at EOF, unset EOF so that
+ * wtap_read/gzread has a chance to succeed. This is necessary if
+ * we're tailing a file.
+ */
+void wtap_cleareof(wtap *wth);
+
+/*
+ * Set callback functions to add new hostnames. Currently pcapng-only.
+ * MUST match add_ipv4_name and add_ipv6_name in addr_resolv.c.
+ */
+typedef void (*wtap_new_ipv4_callback_t) (const guint addr, const gchar *name);
+void wtap_set_cb_new_ipv4(wtap *wth, wtap_new_ipv4_callback_t add_new_ipv4);
+
+typedef void (*wtap_new_ipv6_callback_t) (const void *addrp, const gchar *name);
+void wtap_set_cb_new_ipv6(wtap *wth, wtap_new_ipv6_callback_t add_new_ipv6);
+
/* Returns TRUE if read was successful. FALSE if failure. data_offset is
* set to the offset in the file where the data for the read packet is
* located. */
/*** get various information snippets about the current file ***/
-/* Return an approximation of the amount of data we've read sequentially
+/** Return an approximation of the amount of data we've read sequentially
* from the file so far. */
-gint64 wtap_read_so_far(wtap *wth, int *err);
+gint64 wtap_read_so_far(wtap *wth);
gint64 wtap_file_size(wtap *wth, int *err);
-int wtap_snapshot_length(wtap *wth); /* per file */
+guint wtap_snapshot_length(wtap *wth); /* per file */
int wtap_file_type(wtap *wth);
int wtap_file_encap(wtap *wth);
int wtap_file_tsprecision(wtap *wth);
+wtapng_section_t* wtap_file_get_shb_info(wtap *wth);
+wtapng_iface_descriptions_t *wtap_file_get_idb_info(wtap *wth);
+void wtap_write_shb_comment(wtap *wth, gchar *comment);
/*** close the current file ***/
void wtap_sequential_close(wtap *wth);
gboolean wtap_dump_can_open(int filetype);
gboolean wtap_dump_can_write_encap(int filetype, int encap);
gboolean wtap_dump_can_compress(int filetype);
+gboolean wtap_dump_has_name_resolution(int filetype);
+
wtap_dumper* wtap_dump_open(const char *filename, int filetype, int encap,
int snaplen, gboolean compressed, int *err);
+
+wtap_dumper* wtap_dump_open_ng(const char *filename, int filetype, int encap,
+ int snaplen, gboolean compressed, wtapng_section_t *shb_hdr, wtapng_iface_descriptions_t *idb_inf, int *err);
+
wtap_dumper* wtap_dump_fdopen(int fd, int filetype, int encap, int snaplen,
gboolean compressed, int *err);
+
gboolean wtap_dump(wtap_dumper *, const struct wtap_pkthdr *,
- const union wtap_pseudo_header *pseudo_header, const guchar *, int *err);
+ const union wtap_pseudo_header *pseudo_header, const guint8 *, int *err);
void wtap_dump_flush(wtap_dumper *);
gint64 wtap_get_bytes_dumped(wtap_dumper *);
void wtap_set_bytes_dumped(wtap_dumper *wdh, gint64 bytes_dumped);
+struct addrinfo;
+gboolean wtap_dump_set_addrinfo_list(wtap_dumper *wdh, struct addrinfo *addrinfo_list);
gboolean wtap_dump_close(wtap_dumper *, int *);
+/*
+ * Get a GArray of WTAP_FILE_ values for file types that can be used
+ * to save a file of a given type with a given WTAP_ENCAP_ type.
+ */
+GArray *wtap_get_savable_file_types(int file_type, int file_encap);
+
/*** various string converter functions ***/
const char *wtap_file_type_string(int filetype);
const char *wtap_file_type_short_string(int filetype);
int wtap_short_string_to_file_type(const char *short_name);
-const char *wtap_file_extensions_string(int filetype);
-const char *wtap_file_extension_default_string(int filetype);
+/*** various file extension functions ***/
+const char *wtap_default_file_extension(int filetype);
+GSList *wtap_get_file_extensions_list(int filetype);
+void wtap_free_file_extensions_list(GSList *extensions);
const char *wtap_encap_string(int encap);
const char *wtap_encap_short_string(int encap);
/* An attempt to read failed, reason unknown */
#define WTAP_ERR_SHORT_READ -12
/* An attempt to read read less data than it should have */
-#define WTAP_ERR_BAD_RECORD -13
- /* We read an invalid record */
+#define WTAP_ERR_BAD_FILE -13
+ /* The file appears to be damaged or corrupted or otherwise bogus */
#define WTAP_ERR_SHORT_WRITE -14
/* An attempt to write wrote less data than it should have */
#define WTAP_ERR_UNC_TRUNCATED -15
/* LZ77 compressed data has bad offset to string */
#define WTAP_ERR_RANDOM_OPEN_STDIN -18
/* We're trying to open the standard input for random access */
-#define WTAP_ERR_COMPRESSION_NOT_SUPPORTED -19
+#define WTAP_ERR_COMPRESSION_NOT_SUPPORTED -19
/* The filetype doesn't support output compression */
-
-/* Errors from zlib; zlib error Z_xxx turns into Wiretap error
- WTAP_ERR_ZLIB + Z_xxx.
-
- WTAP_ERR_ZLIB_MIN and WTAP_ERR_ZLIB_MAX bound the range of zlib
- errors; we leave room for 100 positive and 100 negative error
- codes. */
-
-#define WTAP_ERR_ZLIB -200
-#define WTAP_ERR_ZLIB_MAX -100
-#define WTAP_ERR_ZLIB_MIN -300
+#define WTAP_ERR_CANT_SEEK -20
+ /* An attempt to seek failed, reason unknown */
+#define WTAP_ERR_DECOMPRESS -21
+ /* Error decompressing */
+#define WTAP_ERR_INTERNAL -22
+ /* "Shouldn't happen" internal errors */
#ifdef __cplusplus
}
git.samba.org / obnox / wireshark / wip.git / blobdiff