dnl This file is part of the Autoconf packaging for Ethereal.
dnl Copyright (C) 1998-2000 by Gerald Combs.
dnl
-dnl $Id: acinclude.m4,v 1.40 2002/01/30 08:46:27 guy Exp $
+dnl $Id$
dnl
dnl This program is free software; you can redistribute it and/or modify
dnl it under the terms of the GNU General Public License as published by
# XXX - IRIX, and other OSes, may require some flag equivalent to
# "-R" here.
#
-AC_DEFUN(AC_ETHEREAL_ADD_DASH_L,
+AC_DEFUN([AC_ETHEREAL_ADD_DASH_L],
[$1="$$1 -L$2"
case "$host_os" in
solaris*)
dnl ### Checks for structure members
-AC_DEFUN(AC_ETHEREAL_STRUCT_SA_LEN,
+AC_DEFUN([AC_ETHEREAL_STRUCT_SA_LEN],
[AC_CACHE_CHECK([for sa_len in struct sockaddr], ac_cv_ethereal_struct_sa_len,
[AC_TRY_COMPILE([#include <sys/types.h>
#include <sys/socket.h>], [struct sockaddr s; s.sa_len;],
ac_cv_ethereal_struct_sa_len=yes, ac_cv_ethereal_struct_sa_len=no)])
if test $ac_cv_ethereal_struct_sa_len = yes; then
- AC_DEFINE(HAVE_SA_LEN)
+ AC_DEFINE(HAVE_SA_LEN, 1, [Define if sa_len field exists in struct sockaddr])
fi
])
+
+dnl
+dnl Check whether a given format can be used to print 64-bit integers
+dnl
+AC_DEFUN([AC_ETHEREAL_CHECK_64BIT_FORMAT],
+[
+ AC_MSG_CHECKING([whether %$1x can be used to format 64-bit integers])
+ AC_RUN_IFELSE(
+ [
+ AC_LANG_SOURCE(
+ [[
+# ifdef HAVE_INTTYPES_H
+ #include <inttypes.h>
+# endif
+ #include <glibconfig.h>
+ #include <stdio.h>
+ #include <sys/types.h>
+
+ main()
+ {
+ guint64 t = 1;
+ char strbuf[16+1];
+ sprintf(strbuf, "%016$1x", t << 32);
+ if (strcmp(strbuf, "0000000100000000") == 0)
+ exit(0);
+ else
+ exit(1);
+ }
+ ]])
+ ],
+ [
+ AC_DEFINE(PRId64, "$1d", [Format for printing 64-bit signed decimal numbers])
+ AC_DEFINE(PRIo64, "$1o", [Format for printing 64-bit unsigned octal numbers])
+ AC_DEFINE(PRIx64, "$1x", [Format for printing 64-bit unsigned hexadecimal numbers (lower-case)])
+ AC_DEFINE(PRIX64, "$1X", [Format for printing 64-bit unsigned hexadecimal numbers (upper-case)])
+ AC_DEFINE(PRIu64, "$1u", [Format for printing 64-bit unsigned decimal numbers])
+ AC_MSG_RESULT(yes)
+ ],
+ [
+ AC_MSG_RESULT(no)
+ $2
+ ])
+])
+
#
# AC_ETHEREAL_IPV6_STACK
#
# By Jun-ichiro "itojun" Hagino, <itojun@iijlab.net>
#
-AC_DEFUN(AC_ETHEREAL_IPV6_STACK,
+AC_DEFUN([AC_ETHEREAL_IPV6_STACK],
[
v6type=unknown
v6lib=none
# GNU Autoconf 2.13; the comment came from there.
# Done by Guy Harris <guy@alum.mit.edu> on 2000-01-14.
#
-AC_DEFUN(AC_ETHEREAL_GETHOSTBY_LIB_CHECK,
+AC_DEFUN([AC_ETHEREAL_GETHOSTBY_LIB_CHECK],
[
# msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
# to get the SysV transport functions.
#
# We use "connect" because that's what AC_PATH_XTRA did.
#
-AC_DEFUN(AC_ETHEREAL_SOCKET_LIB_CHECK,
+AC_DEFUN([AC_ETHEREAL_SOCKET_LIB_CHECK],
[
# lieder@skyler.mavd.honeywell.com says without -lsocket,
# socket/setsockopt and other routines are undefined under SCO ODT
#
# AC_ETHEREAL_PCAP_CHECK
#
-AC_DEFUN(AC_ETHEREAL_PCAP_CHECK,
+AC_DEFUN([AC_ETHEREAL_PCAP_CHECK],
[
if test -z "$pcap_dir"
then
+ # Pcap header checks
+ # XXX need to set a var AC_CHECK_HEADER(pcap.h,,)
+
#
# The user didn't specify a directory in which libpcap resides;
# we assume that the current library search path will work,
# but we may have to look for the header in a "pcap"
# subdirectory of "/usr/include" or "/usr/local/include",
# as some systems apparently put "pcap.h" in a "pcap"
- # subdirectory, and we also check "$prefix/include".
+ # subdirectory, and we also check "$prefix/include" - and
+ # "$prefix/include/pcap", in case $prefix is set to
+ # "/usr/include" or "/usr/local/include".
#
# XXX - should we just add "$prefix/include" to the include
# search path and "$prefix/lib" to the library search path?
#
AC_MSG_CHECKING(for extraneous pcap header directories)
found_pcap_dir=""
- for pcap_dir in /usr/include/pcap /usr/local/include/pcap $prefix/include
+ pcap_dir_list="/usr/include/pcap $prefix/include/pcap $prefix/include"
+ if test "x$ac_cv_enable_usr_local" = "xyes" ; then
+ pcap_dir_list="$pcap_dir_list /usr/local/include/pcap"
+ fi
+ for pcap_dir in $pcap_dir_list
do
if test -d $pcap_dir ; then
- CFLAGS="$CFLAGS -I$pcap_dir"
- CPPFLAGS="$CPPFLAGS -I$pcap_dir"
+ if test x$pcap_dir != x/usr/include -a x$pcap_dir != x/usr/local/include ; then
+ CFLAGS="$CFLAGS -I$pcap_dir"
+ CPPFLAGS="$CPPFLAGS -I$pcap_dir"
+ fi
found_pcap_dir=" $found_pcap_dir -I$pcap_dir"
+ break
fi
done
AC_ETHEREAL_ADD_DASH_L(LDFLAGS, $pcap_dir/lib)
fi
- # Pcap header checks
- AC_CHECK_HEADER(net/bpf.h,,
- AC_MSG_ERROR([[Header file net/bpf.h not found; if you installed libpcap from source, did you also do \"make install-incl\"?]]))
- AC_CHECK_HEADER(pcap.h,, AC_MSG_ERROR(Header file pcap.h not found.))
+ # Pcap header check
+ AC_CHECK_HEADER(pcap.h,,
+ AC_MSG_ERROR([[Header file pcap.h not found; if you installed libpcap
+from source, did you also do \"make install-incl\", and if you installed a
+binary package of libpcap, is there also a developer's package of libpcap,
+and did you also install that package?]]))
#
# Check to see if we find "pcap_open_live" in "-lpcap".
AC_CHECK_LIB(pcap, pcap_open_live,
[
PCAP_LIBS=-lpcap
- AC_DEFINE(HAVE_LIBPCAP)
- ], AC_MSG_ERROR(Library libpcap not found.),
- $SOCKET_LIBS $NSL_LIBS)
+ AC_DEFINE(HAVE_LIBPCAP, 1, [Define to use libpcap library])
+ ], [
+ AC_MSG_CHECKING([for pcap_open_live in -lpcap -lcfg -lodm])
+ ac_save_LIBS="$LIBS"
+ LIBS="-lpcap -lcfg -lodm"
+ AC_TRY_LINK(
+ [
+# include <pcap.h>
+ ],
+ [
+ pcap_open_live(NULL, 0, 0, 0, NULL);
+ ],
+ [
+ AC_MSG_RESULT([yes])
+ PCAP_LIBS="-lpcap -lcfg -lodm"
+ AC_DEFINE(HAVE_LIBPCAP, 1, [Define to use libpcap library])
+ ],
+ [
+ AC_MSG_RESULT([no])
+ AC_MSG_ERROR([Library libpcap not found.])
+ ])
+ LIBS=$ac_save_LIBS
+ ], $SOCKET_LIBS $NSL_LIBS)
AC_SUBST(PCAP_LIBS)
-])
-#
-# AC_ETHEREAL_PCAP_VERSION_CHECK
-#
-# Check whether "pcap_version" is defined by libpcap.
-#
-AC_DEFUN(AC_ETHEREAL_PCAP_VERSION_CHECK,
-[
- AC_MSG_CHECKING(whether pcap_version is defined by libpcap)
+ #
+ # Check whether various variables and functions are defined by
+ # libpcap.
+ #
ac_save_LIBS="$LIBS"
+ AC_MSG_CHECKING(whether pcap_version is defined by libpcap)
LIBS="$PCAP_LIBS $SOCKET_LIBS $NSL_LIBS $LIBS"
- AC_TRY_LINK([],
+ AC_TRY_LINK(
[
-char *
-return_pcap_version(void)
-{
- extern char pcap_version[];
-
- return pcap_version;
-}
+# include <stdio.h>
+ extern char *pcap_version;
+ ],
+ [
+ printf ("%s\n", pcap_version);
],
ac_cv_pcap_version_defined=yes,
ac_cv_pcap_version_defined=no,
[echo $ac_n "cross compiling; assumed OK... $ac_c"])
- LIBS="$ac_save_LIBS"
if test "$ac_cv_pcap_version_defined" = yes ; then
AC_MSG_RESULT(yes)
- AC_DEFINE(HAVE_PCAP_VERSION)
+ AC_DEFINE(HAVE_PCAP_VERSION, 1, [Define if libpcap version is known])
else
AC_MSG_RESULT(no)
fi
+ AC_CHECK_FUNCS(pcap_open_dead pcap_freecode)
+ #
+ # Later versions of Mac OS X 10.3[.x] ship a pcap.h that
+ # doesn't define pcap_if_t but ship an 0.8[.x] libpcap,
+ # so the library has "pcap_findalldevs()", but pcap.h
+ # doesn't define "pcap_if_t" so you can't actually *use*
+ # "pcap_findalldevs()".
+ #
+ # That even appears to be true of systems shipped with
+ # 10.3.4, so it doesn't appear only to be a case of
+ # Software Update not updating header files.
+ #
+ # (You can work around this by installing the 0.8 header
+ # files.)
+ #
+ AC_CACHE_CHECK([whether pcap_findalldevs is present and usable],
+ [ac_cv_func_pcap_findalldevs],
+ [
+ AC_LINK_IFELSE(
+ [
+ AC_LANG_SOURCE(
+ [[
+ #include <pcap.h>
+ main()
+ {
+ pcap_if_t *devpointer;
+ char errbuf[1];
+
+ pcap_findalldevs(&devpointer, errbuf);
+ }
+ ]])
+ ],
+ [
+ ac_cv_func_pcap_findalldevs=yes
+ ],
+ [
+ ac_cv_func_pcap_findalldevs=no
+ ])
+ ])
+ #
+ # Don't check for other new routines that showed up after
+ # "pcap_findalldevs()" if we don't have a usable
+ # "pcap_findalldevs()", so we don't end up using them if the
+ # "pcap.h" is crufty and old and doesn't declare them.
+ #
+ if test $ac_cv_func_pcap_findalldevs = "yes" ; then
+ AC_DEFINE(HAVE_PCAP_FINDALLDEVS, 1,
+ [Define to 1 if you have the `pcap_findalldevs' function and a pcap.h that declares pcap_if_t.])
+ AC_CHECK_FUNCS(pcap_datalink_val_to_name pcap_datalink_name_to_val)
+ AC_CHECK_FUNCS(pcap_list_datalinks pcap_set_datalink pcap_lib_version)
+ AC_CHECK_FUNCS(pcap_get_selectable_fd)
+ fi
+ LIBS="$ac_save_LIBS"
])
#
# AC_ETHEREAL_ZLIB_CHECK
#
-AC_DEFUN(AC_ETHEREAL_ZLIB_CHECK,
+AC_DEFUN([AC_ETHEREAL_ZLIB_CHECK],
[
+ if test "x$zlib_dir" != "x"
+ then
+ #
+ # The user specified a directory in which zlib resides,
+ # so add the "include" subdirectory of that directory to
+ # the include file search path and the "lib" subdirectory
+ # of that directory to the library search path.
+ #
+ # XXX - if there's also a zlib in a directory that's
+ # already in CFLAGS, CPPFLAGS, or LDFLAGS, this won't
+ # make us find the version in the specified directory,
+ # as the compiler and/or linker will search that other
+ # directory before it searches the specified directory.
+ #
+ ethereal_save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -I$zlib_dir/include"
+ ethereal_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS -I$zlib_dir/include"
+ ethereal_save_LIBS="$LIBS"
+ AC_ETHEREAL_ADD_DASH_L(LIBS, $zlib_dir/lib)
+ fi
+
#
# Make sure we have "zlib.h". If we don't, it means we probably
# don't have zlib, so don't use it.
#
- AC_CHECK_HEADER(zlib.h,,enable_zlib=no)
+ AC_CHECK_HEADER(zlib.h,,
+ [
+ if test "x$zlib_dir" != "x"
+ then
+ #
+ # The user used "--with-zlib=" to specify a directory
+ # containing zlib, but we didn't find the header file
+ # there; that either means they didn't specify the
+ # right directory or are confused about whether zlib
+ # is, in fact, installed. Report the error and give up.
+ #
+ AC_MSG_ERROR([zlib header not found in directory specified in --with-zlib])
+ else
+ if test "x$want_zlib" = "xyes"
+ then
+ #
+ # The user tried to force us to use the library, but we
+ # couldn't find the header file; report an error.
+ #
+ AC_MSG_ERROR(Header file zlib.h not found.)
+ else
+ #
+ # We couldn't find the header file; don't use the
+ # library, as it's probably not present.
+ #
+ want_zlib=no
+ fi
+ fi
+ ])
- if test x$enable_zlib != xno
+ if test "x$want_zlib" != "xno"
then
#
# Well, we at least have the zlib header file.
#
- # Check for "gzseek()" in zlib, because we need it, but
+ # Check for "gzgets()" in zlib, because we need it, but
# some older versions of zlib don't have it. It appears
# from the zlib ChangeLog that any released version of zlib
- # with "gzseek()" should have the other routines we
- # depend on, such as "gztell()", and "zError()".
- # (I think they may also get "gzgets()", in which case
- # we can get rid of our own private "gzgets()"
- # implementation, as any zlib that's adequate for our
- # purposes will have "gzgets()".)
- #
- AC_CHECK_LIB(z, gzseek,,enable_zlib=no)
+ # with "gzgets()" should have the other routines we
+ # depend on, such as "gzseek()", "gztell()", and "zError()".
+ #
+ # Another reason why we require "gzgets()" is that
+ # some versions of zlib that didn't have it, such
+ # as 1.0.8, had a bug in "gzseek()" that meant that it
+ # doesn't work correctly on uncompressed files; this
+ # means we cannot use version 1.0.8. (Unfortunately,
+ # that's the version that comes with recent X11 source,
+ # and many people who install XFree86 on their Slackware
+ # boxes don't realize that they should configure it to
+ # use the native zlib rather than building and installing
+ # the crappy old version that comes with XFree86.)
+ #
+ # I.e., we can't just avoid using "gzgets()", as
+ # versions of zlib without "gzgets()" are likely to have
+ # a broken "gzseek()".
+ #
+ AC_CHECK_LIB(z, gzgets,
+ [
+ if test "x$zlib_dir" != "x"
+ then
+ #
+ # Put the "-I" and "-L" flags for zlib at
+ # the beginning of CFLAGS, CPPFLAGS, and
+ # LIBS.
+ #
+ LIBS=""
+ AC_ETHEREAL_ADD_DASH_L(LIBS, $zlib_dir/lib)
+ LIBS="$LIBS -lz $ethereal_save_LIBS"
+ else
+ LIBS="-lz $LIBS"
+ fi
+ AC_DEFINE(HAVE_LIBZ, 1, [Define to use libz library])
+ ],[
+ if test "x$zlib_dir" != "x"
+ then
+ #
+ # Restore the versions of CFLAGS, CPPFLAGS,
+ # and LIBS before we added the "-with-zlib="
+ # directory, as we didn't actually find
+ # zlib there, or didn't find a zlib that
+ # contains gzgets there.
+ #
+ CFLAGS="$ethereal_save_CFLAGS"
+ CPPFLAGS="$ethereal_save_CPPFLAGS"
+ LIBS="$ethereal_save_LIBS"
+ fi
+ want_zlib=no
+ ])
fi
- if test x$enable_zlib != xno
+ if test "x$want_zlib" != "xno"
then
#
# Well, we at least have the zlib header file and a zlib
- # with "gzseek()".
+ # with "gzgets()".
#
- # Now check for "gzseek()" in zlib when linking with the
+ # Now check for "gzgets()" in zlib when linking with the
# linker flags for GTK+ applications; people often grab
# XFree86 source and build and install it on their systems,
# and they appear sometimes to misconfigure XFree86 so that,
# own zlib in the X11 library directory.
#
# The XFree86 zlib is an older version that lacks
- # "gzseek()", and that's the zlib with which Ethereal
+ # "gzgets()", and that's the zlib with which Ethereal
# gets linked, so the build of Ethereal fails.
#
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$GTK_LIBS -lz $LIBS"
- AC_MSG_CHECKING([for gzseek missing when linking with X11])
- AC_TRY_LINK_FUNC(gzseek, AC_MSG_RESULT(no),
+ AC_MSG_CHECKING([for gzgets missing when linking with X11])
+ AC_TRY_LINK_FUNC(gzgets, AC_MSG_RESULT(no),
[
AC_MSG_RESULT(yes)
AC_MSG_ERROR(old zlib found when linking with X11 - get rid of old zlib.)
])
#
-# AC_ETHEREAL_UCDSNMP_CHECK
+# AC_ETHEREAL_LIBPCRE_CHECK
#
-AC_DEFUN(AC_ETHEREAL_UCDSNMP_CHECK,
+AC_DEFUN([AC_ETHEREAL_LIBPCRE_CHECK],
[
- want_ucdsnmp=yes
+ if test "x$pcre_dir" != "x"
+ then
+ #
+ # The user specified a directory in which libpcre resides,
+ # so add the "include" subdirectory of that directory to
+ # the include file search path and the "lib" subdirectory
+ # of that directory to the library search path.
+ #
+ # XXX - if there's also a libpcre in a directory that's
+ # already in CFLAGS, CPPFLAGS, or LDFLAGS, this won't
+ # make us find the version in the specified directory,
+ # as the compiler and/or linker will search that other
+ # directory before it searches the specified directory.
+ #
+ ethereal_save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -I$pcre_dir/include"
+ ethereal_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS -I$pcre_dir/include"
+ ethereal_save_LIBS="$LIBS"
+ LIBS="$LIBS -lpcre"
+ ethereal_save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -L$pcre_dir/lib"
+ fi
+
+ #
+ # Make sure we have "pcre.h". If we don't, it means we probably
+ # don't have libpcre, so don't use it.
+ #
+ AC_CHECK_HEADER(pcre.h,,
+ [
+ if test "x$pcre_dir" != "x"
+ then
+ #
+ # The user used "--with-pcre=" to specify a directory
+ # containing libpcre, but we didn't find the header file
+ # there; that either means they didn't specify the
+ # right directory or are confused about whether libpcre
+ # is, in fact, installed. Report the error and give up.
+ #
+ AC_MSG_ERROR([libpcre header not found in directory specified in --with-pcre])
+ else
+ if test "x$want_pcre" = "xyes"
+ then
+ #
+ # The user tried to force us to use the library, but we
+ # couldn't find the header file; report an error.
+ #
+ AC_MSG_ERROR(Header file pcre.h not found.)
+ else
+ #
+ # We couldn't find the header file; don't use the
+ # library, as it's probably not present.
+ #
+ want_pcre=no
+ fi
+ fi
+ ])
- AC_ARG_WITH(ucdsnmp,
- [ --with-ucdsnmp=DIR use UCD SNMP client library, located in directory DIR.], [
- if test $withval = no
+ if test "x$want_pcre" != "xno"
then
- want_ucdsnmp=no
+ #
+ # Well, we at least have the pcre header file.
+ #
+ # We're only using standard functions from libpcre,
+ # so we don't need to perform extra checks.
+ #
+ AC_CHECK_LIB(pcre, pcre_compile,
+ [
+ if test "x$pcre_dir" != "x"
+ then
+ #
+ # Put the "-I" and "-L" flags for pcre at
+ # the beginning of CFLAGS, CPPFLAGS,
+ # LDFLAGS, and LIBS.
+ #
+ PCRE_LIBS="-L$pcre_dir/lib -lpcre $ethereal_save_LIBS"
+ else
+ PCRE_LIBS="-lpcre"
+ fi
+ AC_DEFINE(HAVE_LIBPCRE, 1, [Define to use libpcre library])
+ ],[
+ if test "x$pcre_dir" != "x"
+ then
+ #
+ # Restore the versions of CFLAGS, CPPFLAGS,
+ # LDFLAGS, and LIBS before we added the
+ # "--with-pcre=" directory, as we didn't
+ # actually find pcre there.
+ #
+ CFLAGS="$ethereal_save_CFLAGS"
+ CPPFLAGS="$ethereal_save_CPPFLAGS"
+ LDFLAGS="$ethereal_save_LDFLAGS"
+ LIBS="$ethereal_save_LIBS"
+ PCRE_LIBS=""
+ fi
+ want_pcre=no
+ ])
+ AC_SUBST(PCRE_LIBS)
+ fi
+])
+
+#
+# AC_ETHEREAL_NETSNMP_CHECK
+#
+AC_DEFUN([AC_ETHEREAL_NETSNMP_CHECK],
+[
+ dnl get the net-snmp-config binary
+ if test "x$netsnmpconfig" = "x" ; then
+ #
+ # The user didn't specify where net-snmp-config is
+ # located; search for it.
+ #
+ AC_PATH_PROG(NETSNMPCONFIG, net-snmp-config)
else
- want_ucdsnmp=yes
- ucdsnmp_user_dir=$withval
+ NETSNMPCONFIG=$netsnmpconfig
+ if test ! -x $NETSNMPCONFIG -o ! -f $NETSNMPCONFIG ; then
+ NETSNMPCONFIG=$netsnmpconfig/bin/net-snmp-config
+ if test ! -x $NETSNMPCONFIG -o ! -f $NETSNMPCONFIG ; then
+ AC_MSG_ERROR(Invalid net-snmp-config: $netsnmpconfig)
+ fi
+ fi
fi
- ])
- if test $want_ucdsnmp = yes
+ #
+ # XXX - check whether $NETSNMPCONFIG is executable?
+ # if test "x$NETSNMPCONFIG" != "xno" -a "x$NETSNMPCONFIG" != "x" -a -x "$NETSNMPCONFIG" ; then
+ # We already did that if it was set; presumably AC_PATH_PROG
+ # will fail if it doesn't find an executable version.
+ #
+ if test "x$NETSNMPCONFIG" != "x" ; then
+ dnl other choices for flags to use here: could also use
+ dnl --prefix or --exec-prefix if you don't want the full list.
+
+ #
+ # Save the current settings of CFLAGS and CPPFLAGS, and add
+ # the output of "$NETSNMPCONFIG --cflags" to it, so that when
+ # searching for the Net-SNMP headers, we look in whatever
+ # directory that output specifies.
+ #
+ ethereal_save_CFLAGS="$CFLAGS"
+ ethereal_save_CPPFLAGS="$CPPFLAGS"
+ CFLAGS="$CFLAGS `$NETSNMPCONFIG --cflags`"
+ CPPFLAGS="$CPPFLAGS `$NETSNMPCONFIG --cflags`"
+
+ AC_CHECK_HEADERS(net-snmp/net-snmp-config.h net-snmp/library/default_store.h)
+ if test "x$ac_cv_header_net_snmp_net_snmp_config_h" = "xyes" -a "x$ac_cv_header_net_snmp_library_default_store_h" = "xyes" ; then
+ SNMP_LIBS=`$NETSNMPCONFIG --libs`
+ if echo "$SNMP_LIBS" | grep crypto >/dev/null && test "x$SSL_LIBS" = "x"; then
+ if test "x$want_netsnmp" = "xyes" ; then
+ AC_MSG_ERROR(Net-SNMP requires openssl but ssl not enabled)
+ else
+ AC_MSG_RESULT(Net-SNMP requires openssl but ssl not enabled - disabling Net-SNMP)
+ fi
+ CFLAGS="$ethereal_save_CFLAGS"
+ CPPFLAGS="$ethereal_save_CPPFLAGS"
+ SNMP_LIBS=
+ else
+ AC_DEFINE(HAVE_NET_SNMP, 1, [Define to enable support for Net-SNMP])
+ have_net_snmp="yes"
+ fi
+ else
+ if test "x$want_netsnmp" = "xyes" ; then
+ AC_MSG_ERROR(Net-SNMP not found)
+ else
+ #
+ # Restore the versions of CFLAGS and
+ # CPPFLAGS before we added the output
+ # of '$NETSNMPCONFIG --cflags", as we
+ # didn't actually find Net-SNMP there.
+ #
+ CFLAGS="$ethereal_save_CFLAGS"
+ CPPFLAGS="$ethereal_save_CPPFLAGS"
+ fi
+ fi
+ fi
+])
+
+#
+# AC_ETHEREAL_UCDSNMP_CHECK
+#
+AC_DEFUN([AC_ETHEREAL_UCDSNMP_CHECK],
+[
+ if test "x$ucdsnmp_dir" != "x"
then
- ucdsnmpdir=""
+ #
+ # The user specified a directory in which UCD SNMP resides,
+ # so add the "include" subdirectory of that directory to
+ # the include file search path and the "lib" subdirectory
+ # of that directory to the library search path.
+ #
+ # XXX - if there's also a libpcap in a directory that's
+ # already in CFLAGS, CPPFLAGS, or LDFLAGS, this won't
+ # make us find the version in the specified directory,
+ # as the compiler and/or linker will search that other
+ # directory before it searches the specified directory.
+ #
+ CFLAGS="$CFLAGS -I$ucdsnmp_dir/include"
+ CPPFLAGS="$CPPFLAGS -I$ucdsnmp_dir/include"
+ AC_ETHEREAL_ADD_DASH_L(LDFLAGS, $ucdsnmp_dir/lib)
+ fi
- for d in $ucdsnmp_user_dir $prefix
+ #
+ # Check for one of the UCD SNMP header files we include,
+ # to see whether we have UCD SNMP installed.
+ #
+ AC_CHECK_HEADER(ucd-snmp/ucd-snmp-config.h,
+ [
+ #
+ # UCD SNMP or Net-SNMP might require various helper
+ # libraries on various platforms, such as "-ldes425"
+ # in "/usr/kerberos/lib" on some versions of Red
+ # Hat Linux, or "-lkstat" on Solaris.
+ #
+ # It might also require "-lcrypto" on some platforms;
+ # if the user didn't specify --with-ssl, we check
+ # whether it would have made a difference and, if so,
+ # we tell the user that they needed to request it.
+ # (There are annoying licensing issues with it and
+ # GPL'ed code, so we don't include it by default.)
+ #
+ # XXX - autoconf really needs a way to test for
+ # a given routine in a given library *and* to test
+ # whether additional "-L"/"-R"/whatever flags are
+ # needed *before* the "-l" flag for the library
+ # and to test whether additional libraries are
+ # needed after the library *and* to cache all that
+ # information.
+ #
+ ethereal_save_LIBS="$LIBS"
+ found_sprint_realloc_objid=no
+ for extras in "" "-L/usr/kerberos/lib -ldes425" "-lkstat"
do
- if test x$d != xNONE
+ LIBS="-lsnmp $extras $SOCKET_LIBS $NSL_LIBS $SSL_LIBS"
+ if test -z "$extras"
then
- AC_MSG_CHECKING($d for ucd-snmp)
-
- if test x$d != x/usr/local && test -f $d/include/ucd-snmp/snmp.h
+ AC_MSG_CHECKING([whether UCD SNMP includes sprint_realloc_objid])
+ else
+ AC_MSG_CHECKING([whether UCD SNMP includes sprint_realloc_objid (linking with $extras)])
+ fi
+ AC_TRY_LINK(
+ [
+ ],
+ [
+ sprint_realloc_objid();
+ ],
+ [
+ #
+ # We found "sprint_realloc_objid()",
+ # and required the libraries in
+ # extras as well.
+ #
+ AC_MSG_RESULT(yes)
+ SNMP_LIBS="-lsnmp $extras"; break;
+ found_sprint_realloc_objid=yes
+ break
+ ],
+ [
+ #
+ # The link failed. If they didn't ask
+ # for SSL, try linking with -lcrypto
+ # as well, and if *that* succeeds,
+ # tell them they'll need to specify
+ # --want-ssl.
+ #
+ AC_MSG_RESULT(no)
+ if test "x$want_ssl" = "xno"
then
- AC_MSG_RESULT(found)
- ucdsnmpdir=$d
- break
- else
- AC_MSG_RESULT(not found)
+ LIBS="$LIBS -lcrypto"
+ AC_TRY_LINK(
+ [
+ ],
+ [
+ sprint_realloc_objid();
+ ],
+ [
+ #
+ # It worked with -lcrypto; tell
+ # them they'll need to specify
+ # --with-ssl.
+ #
+ AC_MSG_ERROR([UCD SNMP requires -lcrypto but --with-ssl not specified])
+ ])
fi
- fi
+ ])
done
+ LIBS="$ethereal_save_LIBS"
- if test x$ucdsnmpdir != x
- then
- AC_MSG_RESULT(added $d to paths)
- CFLAGS="$CFLAGS -I${ucdsnmpdir}/include"
- CPPFLAGS="$CPPFLAGS -I${ucdsnmpdir}/include"
- AC_ETHEREAL_ADD_DASH_L(LDFLAGS, ${ucdsnmpdir}/lib)
+ #
+ # If we didn't find "sprint_realloc_objid()", fail.
+ # Either the user needs a newer version of UCD SNMP
+ # with "sprint_realloc_objid()", or they may need to
+ # specify "--with-ssl".
+ #
+ if test "$found_snmp_sprint_realloc_objid" = no; then
+ AC_MSG_ERROR([UCD SNMP header files found, but sprint_realloc_objid not found in SNMP library.])
+ fi
+
+ #
+ # We found it, so we have UCD SNMP.
+ #
+ AC_DEFINE(HAVE_UCD_SNMP, 1, [Define to enable support for UCD-SNMP])
+ have_ucd_snmp="yes"
+ ],[
+ #
+ # No, we don't have it.
+ # If the user explicitly asked for UCD SNMP, fail,
+ # otherwise just don't use the UCD SNMP library.
+ #
+ if test "x$want_ucdsnmp" = "xyes" ; then
+ AC_MSG_ERROR(Header file ucd-snmp/snmp.h not found.)
+ fi
+ ])
+])
+
+#
+# AC_ETHEREAL_RPM_CHECK
+# Looks for the rpm program, and checks to see if we can redefine "_topdir".
+#
+AC_DEFUN([AC_ETHEREAL_RPM_CHECK],
+[
+ AC_CHECK_PROG(ac_cv_ethereal_have_rpm, rpm, "yes", "no")
+ if test "x$ac_cv_ethereal_have_rpm" = "xyes"; then
+ rpm --define '_topdir /tmp' > /dev/null 2>&1
+ AC_MSG_CHECKING(to see if we can redefine _topdir)
+ if test $? -eq 0 ; then
+ AC_MSG_RESULT(yes)
+ HAVE_RPM=yes
+ else
+ AC_MSG_RESULT(no. You'll have to build packages manually.)
+ HAVE_RPM=no
fi
fi
])
#
-# AC_ETHEREAL_SSL_CHECK
+# AC_ETHEREAL_GNU_SED_CHECK
+# Checks if GNU sed is the first sed in PATH.
#
-AC_DEFUN(AC_ETHEREAL_SSL_CHECK,
+AC_DEFUN([AC_ETHEREAL_GNU_SED_CHECK],
[
- want_ssl=defaultyes
-
- AC_ARG_WITH(ssl,
- [ --with-ssl=DIR use SSL crypto library, located in directory DIR.], [
- if test "x$withval" = "xno"; then
- want_ssl=no
- elif test "x$withval" = "xyes"; then
- want_ssl=yes
- elif test -d "$withval"; then
- want_ssl=yes
- AC_ETHEREAL_ADD_DASH_L(LDFLAGS, ${withval}/lib)
+ AC_MSG_CHECKING(for GNU sed as first sed in PATH)
+ if ( sh -c "sed --version" </dev/null 2> /dev/null | grep "GNU sed" 2>&1 > /dev/null ) ; then
+ AC_MSG_RESULT(yes)
+ HAVE_GNU_SED=yes
+ else
+ AC_MSG_RESULT(no)
+ HAVE_GNU_SED=no
fi
- ])
+])
- if test "x$want_ssl" = "xdefaultyes"; then
- want_ssl=yes
- withval=/usr/local/ssl
+#
+# AC_ETHEREAL_ADNS_CHECK
+#
+AC_DEFUN([AC_ETHEREAL_ADNS_CHECK],
+[
+ want_adns=defaultyes
+
+ if test "x$want_adns" = "xdefaultyes"; then
+ want_adns=yes
+ withval=/usr/local
if test -d "$withval"; then
AC_ETHEREAL_ADD_DASH_L(LDFLAGS, ${withval}/lib)
fi
fi
- if test "x$want_ssl" = "xyes"; then
- AC_CHECK_LIB(crypto, EVP_md5,
+ if test "x$want_adns" = "xyes"; then
+ AC_CHECK_LIB(adns, adns_init,
[
- SSL_LIBS=-lcrypto
- ],,
+ ADNS_LIBS=-ladns
+ AC_DEFINE(HAVE_GNU_ADNS, 1, [Define to use GNU ADNS library])
+ have_good_adns=yes
+ ],, $SOCKET_LIBS $NSL_LIBS
)
else
AC_MSG_RESULT(not required)
fi
])
+
#
-# AC_ETHEREAL_RPM_CHECK
-# Looks for the rpm program, and checks to see if we can redefine "_topdir".
+# AC_ETHEREAL_KRB5_CHECK
#
-AC_DEFUN(AC_ETHEREAL_RPM_CHECK,
+AC_DEFUN([AC_ETHEREAL_KRB5_CHECK],
[
- AC_CHECK_PROG(ac_cv_ethereal_have_rpm, rpm, "yes", "no")
- if test "x$ac_cv_ethereal_have_rpm" = "xyes"; then
- rpm --define '_topdir /tmp' > /dev/null 2>&1
- AC_MSG_CHECKING(to see if we can redefine _topdir)
- if test $? -eq 0 ; then
+ ethereal_save_CFLAGS="$CFLAGS"
+ ethereal_save_CPPFLAGS="$CPPFLAGS"
+ if test "x$krb5_dir" != "x"
+ then
+ #
+ # The user specified a directory in which kerberos resides,
+ # so add the "include" subdirectory of that directory to
+ # the include file search path and the "lib" subdirectory
+ # of that directory to the library search path.
+ #
+ # XXX - if there's also a kerberos in a directory that's
+ # already in CFLAGS, CPPFLAGS, or LDFLAGS, this won't
+ # make us find the version in the specified directory,
+ # as the compiler and/or linker will search that other
+ # directory before it searches the specified directory.
+ #
+ CFLAGS="$CFLAGS -I$krb5_dir/include"
+ CPPFLAGS="$CPPFLAGS -I$krb5_dir/include"
+ ac_heimdal_version=`grep heimdal $krb5_dir/include/krb5.h | head -n 1 | sed 's/^.*heimdal.*$/HEIMDAL/'`
+ ac_mit_version=`grep 'Massachusetts Institute of Technology' $krb5_dir/include/krb5.h | head -n 1 | sed 's/^.*Massachusetts Institute of Technology.*$/MIT/'`
+ ac_krb5_version="$ac_heimdal_version$ac_mit_version"
+ if test "x$ac_krb5_version" = "xHEIMDAL"
+ KRB5_LIBS="-L$krb5_dir/lib -lkrb5 -lasn1 $SSL_LIBS -lroken -lcrypt"
+ then
+ KRB5_LIBS="-L$krb5_dir/lib -lkrb5 -lk5crypto -lcom_err"
+ fi
+ if test "x$ac_krb5_version" = "xMIT"
+ then
+ AC_DEFINE(HAVE_MIT_KERBEROS, 1, [Define to use MIT kerberos])
+ fi
+ else
+ AC_PATH_PROG(KRB5_CONFIG, krb5-config)
+ if test -x "$KRB5_CONFIG"
+ then
+ KRB5_FLAGS=`"$KRB5_CONFIG" --cflags`
+ KRB5_LIBS=`"$KRB5_CONFIG" --libs`
+ CFLAGS="$CFLAGS $KRB5_FLAGS"
+ CPPFLAGS="$CPPFLAGS $KRB5_FLAGS"
+ #
+ # If -lcrypto is in KRB5_FLAGS, we require it to build
+ # with Heimdal/MIT. We don't want to built with it by
+ # default, due to annoying license incompatibilities
+ # between the OpenSSL license and the GPL, so:
+ #
+ # if SSL_LIBS is set to a non-empty string, we
+ # remove -lcrypto from KRB5_LIBS and replace
+ # it with SSL_LIBS;
+ #
+ # if SSL_LIBS is not set to a non-empty string
+ # we fail with an appropriate error message.
+ #
+ case "$KRB5_LIBS" in
+ *-lcrypto*)
+ if test ! -z "$SSL_LIBS"
+ then
+ KRB5_LIBS=`echo $KRB5_LIBS | sed 's/-lcrypto//'`
+ KRB5_LIBS="$KRB5_LIBS $SSL_LIBS"
+ else
+ AC_MSG_ERROR([Kerberos library requires -lcrypto but --with-ssl not specified])
+ fi
+ ;;
+ esac
+ ac_krb5_version=`"$KRB5_CONFIG" --version | head -n 1 | sed -e 's/^.*heimdal.*$/HEIMDAL/' -e 's/^Kerberos .*$/MIT/'`
+ fi
+ fi
+
+ #
+ # Make sure we have "krb5.h". If we don't, it means we probably
+ # don't have kerberos, so don't use it.
+ #
+ AC_CHECK_HEADER(krb5.h,,
+ [
+ if test "x$krb5_dir" != "x"
+ then
+ #
+ # The user used "--with-krb5=" to specify a directory
+ # containing kerberos, but we didn't find the header file
+ # there; that either means they didn't specify the
+ # right directory or are confused about whether kerberos
+ # is, in fact, installed. Report the error and give up.
+ #
+ AC_MSG_ERROR([kerberos header not found in directory specified in --with-krb5])
+ else
+ if test "x$want_krb5" = "xyes"
+ then
+ #
+ # The user tried to force us to use the library, but we
+ # couldn't find the header file; report an error.
+ #
+ AC_MSG_ERROR(Header file krb5.h not found.)
+ else
+ #
+ # We couldn't find the header file; don't use the
+ # library, as it's probably not present.
+ #
+ want_krb5=no
+ AC_MSG_RESULT(No Heimdal or MIT header found - disabling dissection for some kerberos data in packet decoding)
+ fi
+ fi
+ ])
+
+ if test "x$want_krb5" != "xno"
+ then
+ #
+ # Well, we at least have the krb5 header file.
+ # Check whether this is Heimdal or MIT.
+ #
+ AC_MSG_CHECKING(whether the Kerberos library is Heimdal or MIT)
+ if test "x$ac_krb5_version" = "xHEIMDAL" -o "x$ac_krb5_version" = "xMIT"
+ then
+ #
+ # Yes.
+ # Check whether we have krb5_kt_resolve - and whether
+ # we need to link with -lresolv when linking with
+ # the Kerberos library.
+ #
+ AC_MSG_RESULT($ac_krb5_version)
+ ethereal_save_LIBS="$LIBS"
+ found_krb5_kt_resolve=no
+ for extras in "" "-lresolv"
+ do
+ LIBS="$KRB5_LIBS $extras"
+ if test -z "$extras"
+ then
+ AC_MSG_CHECKING([whether $ac_krb5_version includes krb5_kt_resolve])
+ else
+ AC_MSG_CHECKING([whether $ac_krb5_version includes krb5_kt_resolve (linking with $extras)])
+ fi
+ AC_TRY_LINK(
+ [
+ ],
+ [
+ krb5_kt_resolve();
+ ],
+ [
+ #
+ # We found "krb5_kt_resolve()", and required
+ # the libraries in extras as well.
+ #
+ AC_MSG_RESULT(yes)
+ KRB5_LIBS="$LIBS"
+ AC_DEFINE(HAVE_KERBEROS, 1, [Define to use kerberos])
+ if test "x$ac_krb5_version" = "xHEIMDAL"
+ then
+ AC_DEFINE(HAVE_HEIMDAL_KERBEROS, 1, [Define to use heimdal kerberos])
+ elif test "x$ac_krb5_version" = "xMIT"
+ then
+ AC_DEFINE(HAVE_MIT_KERBEROS, 1, [Define to use MIT kerberos])
+ fi
+ found_krb5_kt_resolve=yes
+ break
+ ],
+ [
+ AC_MSG_RESULT(no)
+ ])
+ done
+ if test "$found_krb5_kt_resolve" = no
+ then
+ #
+ # We didn't find "krb5_kt_resolve()" in the
+ # Kerberos library, even when we tried linking
+ # with -lresolv; we can't link with kerberos.
+ #
+ if test "x$want_krb5" = "xyes"
+ then
+ #
+ # The user tried to force us to use the library,
+ # but we can't do so; report an error.
+ #
+ AC_MSG_ERROR(Usable $ac_krb5_version not found)
+ else
+ #
+ # Restore the versions of CFLAGS and CPPFLAGS
+ # from before we added the flags for Kerberos.
+ #
+ AC_MSG_RESULT(Usable $ac_krb5_version not found - disabling dissection for some kerberos data in packet decoding)
+ CFLAGS="$ethereal_save_CFLAGS"
+ CPPFLAGS="$ethereal_save_CPPFLAGS"
+ KRB5_LIBS=""
+ want_krb5=no
+ fi
+ else
+ #
+ # We can link with Kerberos; see whether krb5.h
+ # defines KEYTYPE_ARCFOUR_56 (where "defines" means
+ # "as a #define or as an enum member).
+ #
+ AC_MSG_CHECKING([whether krb5.h defines KEYTYPE_ARCFOUR_56])
+ AC_COMPILE_IFELSE(
+ [
+ AC_LANG_SOURCE(
+ [[
+ #include <krb5.h>
+ #include <stdio.h>
+
+ main()
+ {
+ printf("%u\n", KEYTYPE_ARCFOUR_56);
+ }
+ ]])
+ ],
+ [
AC_MSG_RESULT(yes)
- HAVE_RPM=yes
+ AC_DEFINE(HAVE_KEYTYPE_ARCFOUR_56, 1, [Define if krb5.h defines KEYTYPE_ARCFOUR_56])
+ ],
+ [
+ AC_MSG_RESULT(no)
+ ])
+ fi
+ LIBS="$ethereal_save_LIBS"
+ else
+ #
+ # It's not Heimdal or MIT.
+ #
+ AC_MSG_RESULT(no)
+ if test "x$want_krb5" = "xyes"
+ then
+ #
+ # The user tried to force us to use the library,
+ # but we can't do so; report an error.
+ #
+ AC_MSG_ERROR(Kerberos not found)
else
- AC_MSG_RESULT(no. You'll have to build packages manually.)
- HAVE_RPM=no
+ #
+ # Restore the versions of CFLAGS and CPPFLAGS
+ # from before we added the flags for Kerberos.
+ #
+ AC_MSG_RESULT(Kerberos not found - disabling dissection for some kerberos data in packet decoding)
+ CFLAGS="$ethereal_save_CFLAGS"
+ CPPFLAGS="$ethereal_save_CPPFLAGS"
+ KRB5_LIBS=""
+ want_krb5=no
fi
+ fi
+ else
+ #
+ # The user asked us not to use Kerberos, or they didn't
+ # say whether they wanted us to use it but we found
+ # that we couldn't.
+ #
+ # Restore the versions of CFLAGS and CPPFLAGS
+ # from before we added the flags for Kerberos.
+ #
+ CFLAGS="$ethereal_save_CFLAGS"
+ CPPFLAGS="$ethereal_save_CPPFLAGS"
+ KRB5_LIBS=""
+ want_krb5=no
fi
+ AC_SUBST(KRB5_LIBS)
])
git.samba.org / obnox / wireshark / wip.git / blobdiff