; ; wireshark.nsi ; ; $Id$ ; Set the compression mechanism first. ; As of NSIS 2.07, solid compression which makes installer about 1MB smaller ; is no longer the default, so use the /SOLID switch. ; This unfortunately is unknown to NSIS prior to 2.07 and creates an error. ; So if you get an error here, please update to at least NSIS 2.07! SetCompressor /SOLID lzma InstType "un.Default (keep Personal Settings and WinPcap)" InstType "un.All (remove all)" ; Used to refresh the display of file association !define SHCNE_ASSOCCHANGED 0x08000000 !define SHCNF_IDLIST 0 ; Used to add associations between file extensions and Wireshark !define WIRESHARK_ASSOC "wireshark-capture-file" ; ============================================================================ ; Header configuration ; ============================================================================ ; The name of the installer !define PROGRAM_NAME "Wireshark" !if ${WIRESHARK_TARGET_PLATFORM} == "win32" !define BITS 32 !else !define BITS 64 !endif Name "${PROGRAM_NAME} ${VERSION} (${BITS}-bit)" ; The file to write OutFile "wireshark-${WIRESHARK_TARGET_PLATFORM}-${VERSION}.exe" ; Icon of installer and uninstaller Icon "..\..\image\wiresharkinst.ico" UninstallIcon "..\..\image\wiresharkinst.ico" ; Uninstall stuff (NSIS 2.08: "\r\n" don't work here) !define MUI_UNCONFIRMPAGE_TEXT_TOP "The following Wireshark installation will be uninstalled. Click 'Next' to continue." ; Uninstall stuff (this text isn't used with the MODERN_UI!) ;UninstallText "This will uninstall Wireshark.\r\nBefore starting the uninstallation, make sure Wireshark is not running.\r\nClick 'Next' to continue." XPStyle on ; ============================================================================ ; Modern UI ; ============================================================================ ; The modern user interface will look much better than the common one. ; However, as the development of the modern UI is still going on, and the script ; syntax changes, you will need exactly that NSIS version, which this script is ; made for. This is the current (December 2003) latest version: V2.0b4 ; If you are using a different version, it's not predictable what will happen. !include "MUI.nsh" ;!addplugindir ".\Plugins" !define MUI_ICON "..\..\image\wiresharkinst.ico" !define MUI_UNICON "..\..\image\wiresharkinst.ico" !define MUI_COMPONENTSPAGE_SMALLDESC !define MUI_FINISHPAGE_NOAUTOCLOSE !define MUI_UNFINISHPAGE_NOAUTOCLOSE !define MUI_WELCOMEPAGE_TEXT "This wizard will guide you through the installation of Wireshark.\r\n\r\nBefore starting the installation, make sure Wireshark is not running.\r\n\r\nClick 'Next' to continue." ;!define MUI_FINISHPAGE_LINK "Install WinPcap to be able to capture packets from a network!" ;!define MUI_FINISHPAGE_LINK_LOCATION "http://www.winpcap.org" ; NSIS shows Readme files by opening the Readme file with the default application for ; the file's extension. "README.win32" won't work in most cases, because extension "win32" ; is usually not associated with an appropriate text editor. We should use extension "txt" ; for a text file or "html" for an html README file. !define MUI_FINISHPAGE_SHOWREADME "$INSTDIR\NEWS.txt" !define MUI_FINISHPAGE_SHOWREADME_TEXT "Show News" !define MUI_FINISHPAGE_SHOWREADME_NOTCHECKED !define MUI_FINISHPAGE_RUN "$INSTDIR\wireshark.exe" !define MUI_FINISHPAGE_RUN_NOTCHECKED !define MUI_PAGE_CUSTOMFUNCTION_SHOW myShowCallback ; ============================================================================ ; MUI Pages ; ============================================================================ !insertmacro MUI_PAGE_WELCOME !insertmacro MUI_PAGE_LICENSE "..\..\COPYING" !insertmacro MUI_PAGE_COMPONENTS Page custom DisplayAdditionalTasksPage !insertmacro MUI_PAGE_DIRECTORY Page custom DisplayWinPcapPage !insertmacro MUI_PAGE_INSTFILES !insertmacro MUI_PAGE_FINISH !insertmacro MUI_UNPAGE_WELCOME !insertmacro MUI_UNPAGE_CONFIRM !insertmacro MUI_UNPAGE_COMPONENTS !insertmacro MUI_UNPAGE_INSTFILES !insertmacro MUI_UNPAGE_FINISH ; ============================================================================ ; MUI Languages ; ============================================================================ !insertmacro MUI_LANGUAGE "English" ; ============================================================================ ; Reserve Files ; ============================================================================ ;Things that need to be extracted on first (keep these lines before any File command!) ;Only useful for BZIP2 compression ReserveFile "AdditionalTasksPage.ini" ReserveFile "WinPcapPage.ini" !insertmacro MUI_RESERVEFILE_INSTALLOPTIONS ; ============================================================================ ; Section macros ; ============================================================================ !include "Sections.nsh" ; ========= Macro to unselect and disable a section ========= !macro DisableSection SECTION Push $0 SectionGetFlags "${SECTION}" $0 IntOp $0 $0 & ${SECTION_OFF} IntOp $0 $0 | ${SF_RO} SectionSetFlags "${SECTION}" $0 Pop $0 !macroend ; ========= Macro to enable (unreadonly) a section ========= !define SECTION_ENABLE 0xFFFFFFEF !macro EnableSection SECTION Push $0 SectionGetFlags "${SECTION}" $0 IntOp $0 $0 & ${SECTION_ENABLE} SectionSetFlags "${SECTION}" $0 Pop $0 !macroend ; ============================================================================ ; Services ; ============================================================================ !include "servicelib.nsh" ; ============================================================================ ; Command Line ; ============================================================================ !include "FileFunc.nsh" !insertmacro GetParameters !insertmacro GetOptions ; ============================================================================ ; License page configuration ; ============================================================================ LicenseText "Wireshark is distributed under the GNU General Public License." LicenseData "..\..\COPYING" ; ============================================================================ ; Component page configuration ; ============================================================================ ComponentText "The following components are available for installation." ; Component check boxes ; Commented out for NSIS v 2.0 ; EnabledBitmap "..\..\image\nsis-checked.bmp" ; DisabledBitmap "..\..\image\nsis-unchecked.bmp" ; ============================================================================ ; Directory selection page configuration ; ============================================================================ ; The text to prompt the user to enter a directory DirText "Choose a directory in which to install Wireshark." ; The default installation directory !if ${WIRESHARK_TARGET_PLATFORM} == "win64" InstallDir $PROGRAMFILES64\Wireshark !else InstallDir $PROGRAMFILES\Wireshark !endif ; See if this is an upgrade; if so, use the old InstallDir as default InstallDirRegKey HKEY_LOCAL_MACHINE SOFTWARE\Wireshark "InstallDir" ; ============================================================================ ; Install page configuration ; ============================================================================ ShowInstDetails show ShowUninstDetails show ; ============================================================================ ; Functions and macros ; ============================================================================ !macro UpdateIcons Push $R0 Push $R1 Push $R2 !define UPDATEICONS_UNIQUE ${__LINE__} IfFileExists "$SYSDIR\shell32.dll" UpdateIcons.ok_shell32_${UPDATEICONS_UNIQUE} UpdateIcons.error_shell32_${UPDATEICONS_UNIQUE} UpdateIcons.ok_shell32_${UPDATEICONS_UNIQUE}: System::Call 'shell32.dll::SHChangeNotify(i, i, i, i) v (${SHCNE_ASSOCCHANGED}, ${SHCNF_IDLIST}, 0, 0)' Goto UpdateIcons.quit_${UPDATEICONS_UNIQUE} UpdateIcons.error_shell32_${UPDATEICONS_UNIQUE}: MessageBox MB_OK|MB_ICONSTOP \ "Can't find 'shell32.dll' library. Impossible to update icons" \ /SD IDOK Goto UpdateIcons.quit_${UPDATEICONS_UNIQUE} UpdateIcons.quit_${UPDATEICONS_UNIQUE}: !undef UPDATEICONS_UNIQUE Pop $R2 Pop $R1 Pop $R0 !macroend Function Associate ; $R0 should contain the prefix to associate to Wireshark Push $R1 ReadRegStr $R1 HKCR $R0 "" StrCmp $R1 "" Associate.doRegister Goto Associate.end Associate.doRegister: ;The extension is not associated to any program, we can do the link WriteRegStr HKCR $R0 "" ${WIRESHARK_ASSOC} Associate.end: pop $R1 FunctionEnd Function un.unlink ; $R0 should contain the prefix to unlink Push $R1 ReadRegStr $R1 HKCR $R0 "" StrCmp $R1 ${WIRESHARK_ASSOC} un.unlink.doUnlink Goto un.unlink.end un.unlink.doUnlink: ; The extension is associated with Wireshark so, we must destroy this! DeleteRegKey HKCR $R0 un.unlink.end: pop $R1 FunctionEnd Var OLD_UNINSTALLER Var OLD_INSTDIR Var OLD_DISPLAYNAME Var TMP_UNINSTALLER ; ============================================================================ ; 64-bit support ; ============================================================================ !include x64.nsh Function .onInit !if ${WIRESHARK_TARGET_PLATFORM} == "win64" ; http://forums.winamp.com/printthread.php?s=16ffcdd04a8c8d52bee90c0cae273ac5&threadid=262873 ${IfNot} ${RunningX64} MessageBox MB_OK "This version of Wireshark only runs on x64 machines.\nTry installing the 32-bit version instead." Abort ${EndIf} !endif ; Copied from http://nsis.sourceforge.net/Auto-uninstall_old_before_installing_new ReadRegStr $OLD_UNINSTALLER HKLM \ "Software\Microsoft\Windows\CurrentVersion\Uninstall\Wireshark" \ "UninstallString" StrCmp $OLD_UNINSTALLER "" done ReadRegStr $OLD_INSTDIR HKLM \ "Software\Microsoft\Windows\CurrentVersion\App Paths\wireshark.exe" \ "Path" StrCmp $OLD_INSTDIR "" done ReadRegStr $OLD_DISPLAYNAME HKLM \ "Software\Microsoft\Windows\CurrentVersion\Uninstall\Wireshark" \ "DisplayName" StrCmp $OLD_DISPLAYNAME "" done MessageBox MB_YESNOCANCEL|MB_ICONQUESTION \ "$OLD_DISPLAYNAME is already installed.\ $\n$\nWould you like to uninstall it first?" \ /SD IDYES \ IDYES prep_uninstaller \ IDNO done Abort ; Copy the uninstaller to $TEMP and run it. ; The uninstaller normally does this by itself, but doesn't wait around ; for the executable to finish, which means ExecWait won't work correctly. prep_uninstaller: ClearErrors StrCpy $TMP_UNINSTALLER "$TEMP\wireshark_uninstaller.exe" ; ...because we surround UninstallString in quotes. StrCpy $0 $OLD_UNINSTALLER -1 1 StrCpy $1 "$TEMP\wireshark_uninstaller.exe" StrCpy $2 1 System::Call 'kernel32::CopyFile(t r0, t r1, b r2) 1' IfSilent silent_uninstall ExecWait "$TMP_UNINSTALLER _?=$OLD_INSTDIR" Goto cleanup silent_uninstall: ExecWait "$TMP_UNINSTALLER /S _?=$OLD_INSTDIR" cleanup: Delete "$TMP_UNINSTALLER" done: ;Extract InstallOptions INI files !insertmacro MUI_INSTALLOPTIONS_EXTRACT "AdditionalTasksPage.ini" !insertmacro MUI_INSTALLOPTIONS_EXTRACT "WinpcapPage.ini" FunctionEnd Function DisplayAdditionalTasksPage !insertmacro MUI_HEADER_TEXT "Select Additional Tasks" "Which additional tasks should be done?" !insertmacro MUI_INSTALLOPTIONS_DISPLAY "AdditionalTasksPage.ini" FunctionEnd Function DisplayWinPcapPage !insertmacro MUI_HEADER_TEXT "Install WinPcap?" "WinPcap is required to capture live network data. Should WinPcap be installed?" !insertmacro MUI_INSTALLOPTIONS_DISPLAY "WinPcapPage.ini" FunctionEnd ; ============================================================================ ; Installation execution commands ; ============================================================================ Var WINPCAP_UNINSTALL ;declare variable for holding the value of a registry key ;Var WIRESHARK_UNINSTALL ;declare variable for holding the value of a registry key Section "-Required" ;------------------------------------------- ; ; Install for every user ; SetShellVarContext all SetOutPath $INSTDIR File "..\..\wiretap\wiretap-${WTAP_VERSION}.dll" !ifdef ENABLE_LIBWIRESHARK File "..\..\epan\libwireshark.dll" !endif File "..\..\wsutil\libwsutil.dll" File "${GLIB_DIR}\bin\libgio-2.0-0.dll" File "${GLIB_DIR}\bin\libglib-2.0-0.dll" File "${GLIB_DIR}\bin\libgobject-2.0-0.dll" File "${GLIB_DIR}\bin\libgmodule-2.0-0.dll" !ifdef ICONV_DIR File "${ICONV_DIR}\bin\iconv.dll" !endif File "${GETTEXT_DIR}\bin\${GETTEXT_DLL}" !ifdef ZLIB_DIR File "${ZLIB_DIR}\zlib1.dll" !endif !ifdef C_ARES_DIR File "${C_ARES_DIR}\cares.dll" !endif !ifdef ADNS_DIR File "${ADNS_DIR}\..\${MSVC_VARIANT}\adns\adns_dll.dll" !endif !ifdef PCRE_DIR File "${PCRE_DIR}\bin\pcre3.dll" File "${PCRE_DIR}\man\cat3\pcrepattern.3.txt" !endif !ifdef KFW_DIR File "${KFW_DIR}\bin\comerr32.dll" File "${KFW_DIR}\bin\krb5_32.dll" !endif !ifdef GNUTLS_DIR File "${GNUTLS_DIR}\bin\libgcrypt-11.dll" File "${GNUTLS_DIR}\bin\libgnutls-26.dll" File "${GNUTLS_DIR}\bin\libgnutls-extra-26.dll" File "${GNUTLS_DIR}\bin\libgnutls-openssl-26.dll" File "${GNUTLS_DIR}\bin\libgpg-error-0.dll" File "${GNUTLS_DIR}\bin\libtasn1-3.dll" !endif !ifdef LUA_DIR File "${LUA_DIR}\lua5.1.dll" File "..\..\epan\wslua\init.lua" File "..\..\epan\wslua\console.lua" File "..\..\epan\wslua\dtd_gen.lua" !endif !ifdef SMI_DIR File "${SMI_DIR}\lib\smi.dll" !endif File "..\..\README" File "..\..\README.win32" File "..\..\AUTHORS-SHORT" File "..\..\COPYING" File "NEWS.txt" File "..\..\manuf" File "..\..\services" File "..\..\doc\ws.css" File "..\..\doc\wireshark.html" File "..\..\doc\wireshark-filter.html" File "..\..\dumpcap.exe" File "..\..\doc\dumpcap.html" File "..\..\ipmap.html" ; C-runtime redistributable !ifdef VCREDIST_EXE ; vcredist_x86.exe (MSVC V8) - copy and execute the redistributable installer File "${VCREDIST_EXE}" ExecWait '"$INSTDIR\vcredist_x86.exe"' $0 DetailPrint "vcredist_x86 returned $0" !else !ifdef MSVCR_DLL ; msvcr*.dll (MSVC V7 or V7.1) - simply copy the dll file !echo "IF YOU GET AN ERROR HERE, check the MSVC_VARIANT setting in config.nmake: MSVC2005 vs. MSVC2005EE!" File "${MSVCR_DLL}" !else !if ${MSVC_VARIANT} != "MSVC6" !error "C-Runtime redistributable for this package not available / not redistributable!" !endif !endif ; MSVCR_DLL !endif ; VCREDIST_EXE ; global config files - don't overwrite if already existing ;IfFileExists cfilters dont_overwrite_cfilters File "..\..\cfilters" ;dont_overwrite_cfilters: ;IfFileExists colorfilters dont_overwrite_colorfilters File "..\..\colorfilters" ;dont_overwrite_colorfilters: ;IfFileExists dfilters dont_overwrite_dfilters File "..\..\dfilters" ;dont_overwrite_dfilters: ;IfFileExists smi_modules dont_overwrite_smi_modules File "..\..\smi_modules" ;dont_overwrite_smi_modules: ; ; Install the Diameter DTD and XML files in the "diameter" subdirectory ; of the installation directory. ; SetOutPath $INSTDIR\diameter File "..\..\diameter\chargecontrol.xml" File "..\..\diameter\dictionary.dtd" File "..\..\diameter\dictionary.xml" File "..\..\diameter\Ericsson.xml" File "..\..\diameter\etsie2e4.xml" File "..\..\diameter\gqpolicy.xml" File "..\..\diameter\imscxdx.xml" File "..\..\diameter\mobileipv4.xml" File "..\..\diameter\nasreq.xml" File "..\..\diameter\sip.xml" File "..\..\diameter\sunping.xml" File "..\..\diameter\TGPPGmb.xml" File "..\..\diameter\TGPPRx.xml" File "..\..\diameter\TGPPSh.xml" SetOutPath $INSTDIR ; ; Install the RADIUS directory files in the "radius" subdirectory ; of the installation directory. ; SetOutPath $INSTDIR\radius File "..\..\radius\dictionary" File "..\..\radius\dictionary.3com" File "..\..\radius\dictionary.3gpp" File "..\..\radius\dictionary.3gpp2" File "..\..\radius\dictionary.acc" File "..\..\radius\dictionary.alcatel" File "..\..\radius\dictionary.alteon" File "..\..\radius\dictionary.altiga" File "..\..\radius\dictionary.aptis" File "..\..\radius\dictionary.ascend" File "..\..\radius\dictionary.aruba" File "..\..\radius\dictionary.bay" File "..\..\radius\dictionary.bintec" File "..\..\radius\dictionary.bristol" File "..\..\radius\dictionary.cablelabs" File "..\..\radius\dictionary.cabletron" File "..\..\radius\dictionary.cisco" File "..\..\radius\dictionary.cisco.bbsm" File "..\..\radius\dictionary.cisco.vpn3000" File "..\..\radius\dictionary.cisco.vpn5000" File "..\..\radius\dictionary.colubris" File "..\..\radius\dictionary.columbia_university" File "..\..\radius\dictionary.compat" File "..\..\radius\dictionary.cosine" File "..\..\radius\dictionary.ericsson" File "..\..\radius\dictionary.erx" File "..\..\radius\dictionary.extreme" File "..\..\radius\dictionary.foundry" File "..\..\radius\dictionary.freeradius" File "..\..\radius\dictionary.gandalf" File "..\..\radius\dictionary.garderos" File "..\..\radius\dictionary.gemtek" File "..\..\radius\dictionary.itk" File "..\..\radius\dictionary.juniper" File "..\..\radius\dictionary.karlnet" File "..\..\radius\dictionary.livingston" File "..\..\radius\dictionary.localweb" File "..\..\radius\dictionary.merit" File "..\..\radius\dictionary.microsoft" File "..\..\radius\dictionary.mikrotik" File "..\..\radius\dictionary.navini" File "..\..\radius\dictionary.netscreen" File "..\..\radius\dictionary.nokia" File "..\..\radius\dictionary.nomadix" File "..\..\radius\dictionary.propel" File "..\..\radius\dictionary.quintum" File "..\..\radius\dictionary.redback" File "..\..\radius\dictionary.redcreek" File "..\..\radius\dictionary.shasta" File "..\..\radius\dictionary.shiva" File "..\..\radius\dictionary.sonicwall" File "..\..\radius\dictionary.springtide" File "..\..\radius\dictionary.starent" File "..\..\radius\dictionary.t_systems_nova" File "..\..\radius\dictionary.telebit" File "..\..\radius\dictionary.trapeze" File "..\..\radius\dictionary.tunnel" File "..\..\radius\dictionary.unisphere" File "..\..\radius\dictionary.unix" File "..\..\radius\dictionary.usr" File "..\..\radius\dictionary.valemount" File "..\..\radius\dictionary.versanet" File "..\..\radius\dictionary.wimax" File "..\..\radius\dictionary.wispr" File "..\..\radius\dictionary.xedia" SetOutPath $INSTDIR ; ; install the dtds in the dtds subdirectory ; SetOutPath $INSTDIR\dtds File "..\..\dtds\dc.dtd" File "..\..\dtds\itunes.dtd" File "..\..\dtds\mscml.dtd" File "..\..\dtds\pocsettings.dtd" File "..\..\dtds\presence.dtd" File "..\..\dtds\reginfo.dtd" File "..\..\dtds\rlmi.dtd" File "..\..\dtds\rss.dtd" File "..\..\dtds\smil.dtd" File "..\..\dtds\xcap-caps.dtd" File "..\..\dtds\xcap-error.dtd" File "..\..\dtds\watcherinfo.dtd" SetOutPath $INSTDIR ; Install the TPNCP DAT file in the "tpncp" subdirectory ; of the installation directory. SetOutPath $INSTDIR\tpncp File "..\..\tpncp\tpncp.dat" ; ; install the wimaxasncp TLV definitions in the wimaxasncp subdirectory ; SetOutPath $INSTDIR\wimaxasncp File "..\..\wimaxasncp\dictionary.xml" File "..\..\wimaxasncp\dictionary.dtd" SetOutPath $INSTDIR SetOutPath $INSTDIR\help File "..\..\help\toc" File "..\..\help\overview.txt" File "..\..\help\getting_started.txt" File "..\..\help\capturing.txt" File "..\..\help\capture_filters.txt" File "..\..\help\display_filters.txt" File "..\..\help\faq.txt" ; Write the uninstall keys for Windows WriteRegStr HKEY_LOCAL_MACHINE "Software\Microsoft\Windows\CurrentVersion\Uninstall\Wireshark" "DisplayVersion" "${VERSION}" WriteRegStr HKEY_LOCAL_MACHINE "Software\Microsoft\Windows\CurrentVersion\Uninstall\Wireshark" "DisplayName" "Wireshark ${VERSION}" WriteRegStr HKEY_LOCAL_MACHINE "Software\Microsoft\Windows\CurrentVersion\Uninstall\Wireshark" "UninstallString" '"$INSTDIR\uninstall.exe"' WriteRegStr HKEY_LOCAL_MACHINE "Software\Microsoft\Windows\CurrentVersion\Uninstall\Wireshark" "Publisher" "The Wireshark developer community, http://www.wireshark.org" WriteRegStr HKEY_LOCAL_MACHINE "Software\Microsoft\Windows\CurrentVersion\Uninstall\Wireshark" "HelpLink" "mailto:wireshark-users@wireshark.org" WriteRegStr HKEY_LOCAL_MACHINE "Software\Microsoft\Windows\CurrentVersion\Uninstall\Wireshark" "URLInfoAbout" "http://www.wireshark.org" WriteRegStr HKEY_LOCAL_MACHINE "Software\Microsoft\Windows\CurrentVersion\Uninstall\Wireshark" "URLUpdateInfo" "http://www.wireshark.org/download/win32/" WriteRegDWORD HKEY_LOCAL_MACHINE "Software\Microsoft\Windows\CurrentVersion\Uninstall\Wireshark" "NoModify" 1 WriteRegDWORD HKEY_LOCAL_MACHINE "Software\Microsoft\Windows\CurrentVersion\Uninstall\Wireshark" "NoRepair" 1 WriteUninstaller "uninstall.exe" ; Write an entry for ShellExecute WriteRegStr HKEY_LOCAL_MACHINE "Software\Microsoft\Windows\CurrentVersion\App Paths\wireshark.exe" "" '$INSTDIR\wireshark.exe' WriteRegStr HKEY_LOCAL_MACHINE "Software\Microsoft\Windows\CurrentVersion\App Paths\wireshark.exe" "Path" '$INSTDIR' ; Create start menu entries (depending on additional tasks page) ReadINIStr $0 "$PLUGINSDIR\AdditionalTasksPage.ini" "Field 2" "State" StrCmp $0 "0" SecRequired_skip_StartMenu SetOutPath $PROFILE ;CreateDirectory "$SMPROGRAMS\Wireshark" ; To qoute "http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnwue/html/ch11d.asp": ; "Do not include Readme, Help, or Uninstall entries on the Programs menu." Delete "$SMPROGRAMS\Wireshark\Wireshark Web Site.lnk" ;WriteINIStr "$SMPROGRAMS\Wireshark\Wireshark Web Site.url" "InternetShortcut" "URL" "http://www.wireshark.org/" CreateShortCut "$SMPROGRAMS\Wireshark.lnk" "$INSTDIR\wireshark.exe" "" "$INSTDIR\wireshark.exe" 0 "" "" "The Wireshark Network Protocol Analyzer" ;CreateShortCut "$SMPROGRAMS\Wireshark\Wireshark Manual.lnk" "$INSTDIR\wireshark.html" ;CreateShortCut "$SMPROGRAMS\Wireshark\Display Filters Manual.lnk" "$INSTDIR\wireshark-filter.html" ;CreateShortCut "$SMPROGRAMS\Wireshark\Wireshark Program Directory.lnk" "$INSTDIR" ;CreateShortCut "$SMPROGRAMS\Wireshark\Uninstall Wireshark.lnk" "$INSTDIR\uninstall.exe" SecRequired_skip_StartMenu: ; is command line option "/desktopicon" set? ${GetParameters} $R0 ${GetOptions} $R0 "/desktopicon=" $R1 StrCmp $R1 "no" SecRequired_skip_DesktopIcon StrCmp $R1 "yes" SecRequired_install_DesktopIcon ; Create desktop icon (depending on additional tasks page and command line option) ReadINIStr $0 "$PLUGINSDIR\AdditionalTasksPage.ini" "Field 3" "State" StrCmp $0 "0" SecRequired_skip_DesktopIcon SecRequired_install_DesktopIcon: CreateShortCut "$DESKTOP\Wireshark.lnk" "$INSTDIR\wireshark.exe" "" "$INSTDIR\wireshark.exe" 0 "" "" "The Wireshark Network Protocol Analyzer" SecRequired_skip_DesktopIcon: ; is command line option "/quicklaunchicon" set? ${GetParameters} $R0 ${GetOptions} $R0 "/quicklaunchicon=" $R1 StrCmp $R1 "no" SecRequired_skip_QuickLaunchIcon StrCmp $R1 "yes" SecRequired_install_QuickLaunchIcon ; Create quick launch icon (depending on additional tasks page and command line option) ReadINIStr $0 "$PLUGINSDIR\AdditionalTasksPage.ini" "Field 4" "State" StrCmp $0 "0" SecRequired_skip_QuickLaunchIcon SecRequired_install_QuickLaunchIcon: CreateShortCut "$QUICKLAUNCH\Wireshark.lnk" "$INSTDIR\wireshark.exe" "" "$INSTDIR\wireshark.exe" 0 "" "" "The Wireshark Network Protocol Analyzer" SecRequired_skip_QuickLaunchIcon: ; Create File Extensions (depending on additional tasks page) ReadINIStr $0 "$PLUGINSDIR\AdditionalTasksPage.ini" "Field 6" "State" StrCmp $0 "0" SecRequired_skip_FileExtensions WriteRegStr HKCR ${WIRESHARK_ASSOC} "" "Wireshark capture file" WriteRegStr HKCR "${WIRESHARK_ASSOC}\Shell\open\command" "" '"$INSTDIR\wireshark.exe" "%1"' WriteRegStr HKCR "${WIRESHARK_ASSOC}\DefaultIcon" "" '"$INSTDIR\wireshark.exe",1' push $R0 StrCpy $R0 ".5vw" Call Associate StrCpy $R0 ".acp" Call Associate StrCpy $R0 ".apc" Call Associate StrCpy $R0 ".atc" Call Associate StrCpy $R0 ".bfr" Call Associate StrCpy $R0 ".cap" Call Associate StrCpy $R0 ".enc" Call Associate StrCpy $R0 ".erf" Call Associate StrCpy $R0 ".fdc" Call Associate StrCpy $R0 ".pcap" Call Associate StrCpy $R0 ".pcapng" Call Associate StrCpy $R0 ".pkt" Call Associate StrCpy $R0 ".snoop" Call Associate StrCpy $R0 ".syc" Call Associate StrCpy $R0 ".tpc" Call Associate StrCpy $R0 ".tr1" Call Associate StrCpy $R0 ".trace" Call Associate StrCpy $R0 ".trc" Call Associate StrCpy $R0 ".wpc" Call Associate StrCpy $R0 ".wpz" Call Associate StrCpy $R0 ".rf5" Call Associate ; if somethings added here, add it also to the uninstall section and the AdditionalTask page pop $R0 !insertmacro UpdateIcons SecRequired_skip_FileExtensions: ; if running as a silent installer, don't try to install winpcap IfSilent SecRequired_skip_Winpcap ; Install WinPcap (depending on winpcap page setting) ReadINIStr $0 "$PLUGINSDIR\WinPcapPage.ini" "Field 4" "State" StrCmp $0 "0" SecRequired_skip_Winpcap ; Uinstall old WinPcap first ReadRegStr $WINPCAP_UNINSTALL HKEY_LOCAL_MACHINE "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\WinPcapInst" "UninstallString" IfErrors lbl_winpcap_notinstalled ;if RegKey is unavailable, WinPcap is not installed ; from released version 3.1, WinPcap will uninstall an old version by itself ;ExecWait '$WINPCAP_UNINSTALL' $0 ;DetailPrint "WinPcap uninstaller returned $0" lbl_winpcap_notinstalled: SetOutPath $INSTDIR File "WinPcap_4_1_beta5.exe" ExecWait '"$INSTDIR\WinPcap_4_1_beta5.exe"' $0 DetailPrint "WinPcap installer returned $0" SecRequired_skip_Winpcap: ; Load Winpcap NPF service at startup (depending on winpcap page) ReadINIStr $0 "$PLUGINSDIR\WinPcapPage.ini" "Field 8" "State" StrCmp $0 "0" SecRequired_no_WinpcapService WriteRegDWORD HKEY_LOCAL_MACHINE "SYSTEM\CurrentControlSet\Services\NPF" "Start" 2 ;set NPF to (SERVICE_AUTO_START) !insertmacro SERVICE "start" "NPF" "" Goto SecRequired_done_WinpcapService SecRequired_no_WinpcapService: WriteRegDWORD HKEY_LOCAL_MACHINE "SYSTEM\CurrentControlSet\Services\NPF" "Start" 3 ;set NPF to (SERVICE_DEMAND_START) !insertmacro SERVICE "stop" "NPF" "" SecRequired_done_WinpcapService: ; If no user profile exists for Wireshark but for Ethereal, copy it over SetShellVarContext current IfFileExists $APPDATA\Wireshark profile_done IfFileExists $APPDATA\Ethereal 0 profile_done ;MessageBox MB_YESNO "This seems to be the first time you use Wireshark. Copy over the personal settings from Ethereal?" /SD IDYES IDNO profile_done CreateDirectory $APPDATA\Wireshark CopyFiles $APPDATA\Ethereal\*.* $APPDATA\Wireshark profile_done: SetShellVarContext all SectionEnd ; "Required" !ifdef GTK_DIR Section "Wireshark" SecWireshark ;------------------------------------------- SetOutPath $INSTDIR File "..\..\wireshark.exe" File "${GTK_DIR}\bin\libgdk-win32-2.0-0.dll" File "${GTK_DIR}\bin\libgdk_pixbuf-2.0-0.dll" File "${GTK_DIR}\bin\libgtk-win32-2.0-0.dll" File "${GTK_DIR}\bin\libatk-1.0-0.dll" File "${GTK_DIR}\bin\libpango-1.0-0.dll" File "${GTK_DIR}\bin\libpangowin32-1.0-0.dll" !ifdef NEED_CAIRO_DLL File "${GTK_DIR}\bin\libcairo-2.dll" File "${GTK_DIR}\bin\libpangocairo-1.0-0.dll" !endif !ifdef NEED_LIBPNG_DLL File "${GTK_DIR}\bin\libpng12-0.dll" !endif !ifdef NEED_LIBTIFF_DLL File "${GTK_DIR}\bin\${TIFF_DLL}" !endif !ifdef NEED_LIBJPEG_DLL File "${GTK_DIR}\bin\${JPEG_DLL}" !endif SetOutPath $INSTDIR\etc\gtk-2.0 File "${GTK_DIR}\etc\gtk-2.0\*.*" !if ${WIRESHARK_TARGET_PLATFORM} == "win32" SetOutPath $INSTDIR\etc\pango File "${GTK_DIR}\etc\pango\pango.*" SetOutPath $INSTDIR\lib\gtk-2.0\${GTK_LIB_DIR}\loaders File "${GTK_DIR}\lib\gtk-2.0\${GTK_LIB_DIR}\loaders\libpixbufloader-*.dll" !endif SetOutPath $INSTDIR\lib\gtk-2.0\${GTK_LIB_DIR}\engines File "${GTK_DIR}\lib\gtk-2.0\${GTK_LIB_DIR}\engines\libpixmap.dll" SetOutPath $INSTDIR\lib\gtk-2.0\modules File "${GTK_DIR}\lib\gtk-2.0\modules\libgail.dll" # Not needed with pango 1.14.5 #SetOutPath $INSTDIR\lib\pango\${PANGO_LIB_DIR}\modules #File "${GTK_DIR}\lib\pango\${PANGO_LIB_DIR}\modules\pango-*.dll" ; GTK MS-Windows Engine (GTK-Wimp) SetOutPath $INSTDIR\${GTK_WIMP_DLLDST_DIR} File "${GTK_WIMP_DLLSRC_DIR}\libwimp.dll" SetOutPath $INSTDIR\${GTK_WIMP_RCDST_DIR} File "${GTK_WIMP_RCSRC_DIR}\gtkrc" SectionEnd ; "Wireshark" !endif Section "TShark" SecTShark ;------------------------------------------- SetOutPath $INSTDIR File "..\..\tshark.exe" File "..\..\doc\tshark.html" SectionEnd SectionGroup "Plugins / Extensions" SecPluginsGroup Section "Dissector Plugins" SecPlugins ;------------------------------------------- SetOutPath '$INSTDIR\plugins\${VERSION}' File "..\..\plugins\asn1\asn1.dll" File "..\..\plugins\docsis\docsis.dll" File "..\..\plugins\ethercat\ethercat.dll" File "..\..\plugins\giop\coseventcomm.dll" File "..\..\plugins\giop\cosnaming.dll" File "..\..\plugins\giop\parlay.dll" File "..\..\plugins\giop\tango.dll" File "..\..\plugins\gryphon\gryphon.dll" File "..\..\plugins\irda\irda.dll" File "..\..\plugins\m2m\m2m.dll" File "..\..\plugins\opcua\opcua.dll" File "..\..\plugins\profinet\profinet.dll" File "..\..\plugins\sercosiii\sercosiii.dll" File "..\..\plugins\unistim\unistim.dll" File "..\..\plugins\wimax\wimax.dll" File "..\..\plugins\wimaxasncp\wimaxasncp.dll" SectionEnd Section "Tree Statistics Plugin" SecStatsTree ;------------------------------------------- SetOutPath '$INSTDIR\plugins\${VERSION}' File "..\..\plugins\stats_tree\stats_tree.dll" SectionEnd Section "Mate - Meta Analysis and Tracing Engine" SecMate ;------------------------------------------- SetOutPath '$INSTDIR\plugins\${VERSION}' File "..\..\plugins\mate\mate.dll" SectionEnd !ifdef NET_SNMP_DIR Section "SNMP MIBs" SecMIBs ;------------------------------------------- SetOutPath $INSTDIR\snmp\mibs File "${NET_SNMP_DIR}\mibs\*.txt" SectionEnd !endif !ifdef SMI_DIR Section "SNMP MIBs" SecMIBs ;------------------------------------------- SetOutPath $INSTDIR\snmp\mibs File "${SMI_DIR}\mibs\*" SectionEnd !endif SectionGroupEnd ; "Plugins / Extensions" SectionGroup "Tools" SecToolsGroup Section "Editcap" SecEditcap ;------------------------------------------- SetOutPath $INSTDIR File "..\..\editcap.exe" File "..\..\doc\editcap.html" SectionEnd Section "Text2Pcap" SecText2Pcap ;------------------------------------------- SetOutPath $INSTDIR File "..\..\text2pcap.exe" File "..\..\doc\text2pcap.html" SectionEnd Section "Mergecap" SecMergecap ;------------------------------------------- SetOutPath $INSTDIR File "..\..\mergecap.exe" File "..\..\doc\mergecap.html" SectionEnd Section "Capinfos" SecCapinfos ;------------------------------------------- SetOutPath $INSTDIR File "..\..\capinfos.exe" File "..\..\doc\capinfos.html" SectionEnd Section "Rawshark" SecRawshark ;------------------------------------------- SetOutPath $INSTDIR File "..\..\rawshark.exe" File "..\..\doc\rawshark.html" SectionEnd SectionGroupEnd ; "Tools" !ifdef HHC_DIR Section "User's Guide" SecUsersGuide ;------------------------------------------- SetOutPath $INSTDIR File "user-guide.chm" SectionEnd !endif Section "Uninstall" un.SecUinstall ;------------------------------------------- ; ; UnInstall for every user ; SectionIn 1 2 SetShellVarContext all Delete "$INSTDIR\rawshark.exe" IfErrors 0 NoRawsharkErrorMsg MessageBox MB_OK "Please note: rawshark.exe could not be removed, it's probably in use!" IDOK 0 ;skipped if rawshark.exe removed Abort "Please note: rawshark.exe could not be removed, it's probably in use! Abort uninstall process!" NoRawsharkErrorMsg: Delete "$INSTDIR\tshark.exe" IfErrors 0 NoTSharkErrorMsg MessageBox MB_OK "Please note: tshark.exe could not be removed, it's probably in use!" IDOK 0 ;skipped if tshark.exe removed Abort "Please note: tshark.exe could not be removed, it's probably in use! Abort uninstall process!" NoTSharkErrorMsg: Delete "$INSTDIR\wireshark.exe" IfErrors 0 NoWiresharkErrorMsg MessageBox MB_OK "Please note: wireshark.exe could not be removed, it's probably in use!" IDOK 0 ;skipped if wireshark.exe removed Abort "Please note: wireshark.exe could not be removed, it's probably in use! Abort uninstall process!" NoWiresharkErrorMsg: DeleteRegKey HKEY_LOCAL_MACHINE "Software\Microsoft\Windows\CurrentVersion\Uninstall\Wireshark" DeleteRegKey HKEY_LOCAL_MACHINE "Software\Wireshark" DeleteRegKey HKEY_LOCAL_MACHINE "Software\Microsoft\Windows\CurrentVersion\App Paths\wireshark.exe" push $R0 StrCpy $R0 ".5vw" Call un.unlink StrCpy $R0 ".acp" Call un.unlink StrCpy $R0 ".apc" Call un.unlink StrCpy $R0 ".atc" Call un.unlink StrCpy $R0 ".bfr" Call un.unlink StrCpy $R0 ".cap" Call un.unlink StrCpy $R0 ".enc" Call un.unlink StrCpy $R0 ".erf" Call un.unlink StrCpy $R0 ".fdc" Call un.unlink StrCpy $R0 ".pcap" Call un.unlink StrCpy $R0 ".pkt" Call un.unlink StrCpy $R0 ".snoop" Call un.unlink StrCpy $R0 ".syc" Call un.unlink StrCpy $R0 ".tpc" Call un.unlink StrCpy $R0 ".tr1" Call un.unlink StrCpy $R0 ".trace" Call un.unlink StrCpy $R0 ".trc" Call un.unlink StrCpy $R0 ".wpc" Call un.unlink StrCpy $R0 ".wpz" Call un.unlink StrCpy $R0 ".rf5" Call un.unlink pop $R0 DeleteRegKey HKCR ${WIRESHARK_ASSOC} DeleteRegKey HKCR "${WIRESHARK_ASSOC}\Shell\open\command" DeleteRegKey HKCR "${WIRESHARK_ASSOC}\DefaultIcon" !insertmacro UpdateIcons Delete "$INSTDIR\etc\gtk-2.0\*.*" Delete "$INSTDIR\etc\pango\*.*" Delete "$INSTDIR\lib\gtk-2.0\2.2.0\engines\*.*" Delete "$INSTDIR\lib\gtk-2.0\2.2.0\loaders\*.*" Delete "$INSTDIR\lib\gtk-2.0\2.2.0\immodules\*.*" Delete "$INSTDIR\lib\gtk-2.0\2.4.0\engines\*.*" Delete "$INSTDIR\lib\gtk-2.0\2.4.0\loaders\*.*" Delete "$INSTDIR\lib\gtk-2.0\2.4.0\immodules\*.*" Delete "$INSTDIR\lib\gtk-2.0\2.10.0\engines\*.*" Delete "$INSTDIR\lib\gtk-2.0\2.10.0\loaders\*.*" Delete "$INSTDIR\lib\gtk-2.0\2.10.0\immodules\*.*" Delete "$INSTDIR\lib\gtk-2.0\modules\*.*" Delete "$INSTDIR\lib\pango\1.2.0\modules\*.*" Delete "$INSTDIR\lib\pango\1.4.0\modules\*.*" Delete "$INSTDIR\lib\pango\1.5.0\modules\*.*" Delete "$INSTDIR\share\themes\Default\gtk-2.0\*.*" Delete "$INSTDIR\help\*.*" Delete "$INSTDIR\diameter\*.*" Delete "$INSTDIR\snmp\mibs\*.*" Delete "$INSTDIR\snmp\*.*" Delete "$INSTDIR\tpncp\*.*" Delete "$INSTDIR\wimaxasncp\*.*" Delete "$INSTDIR\*.exe" Delete "$INSTDIR\*.dll" Delete "$INSTDIR\*.html" Delete "$INSTDIR\ws.css" Delete "$INSTDIR\COPYING" Delete "$INSTDIR\AUTHORS-SHORT" ; previous versions installed these files Delete "$INSTDIR\*.manifest" ; previous versions installed this file Delete "$INSTDIR\AUTHORS-SHORT-FORMAT" Delete "$INSTDIR\README*" Delete "$INSTDIR\NEWS.txt" Delete "$INSTDIR\manuf" Delete "$INSTDIR\services" Delete "$INSTDIR\pcrepattern.3.txt" Delete "$INSTDIR\user-guide.chm" Delete "$INSTDIR\example_snmp_users_file" Delete "$INSTDIR\ipmap.html" Delete "$INSTDIR\radius\*.*" Delete "$INSTDIR\dtds\*.*" Delete "$SMPROGRAMS\Wireshark\*.*" Delete "$SMPROGRAMS\Wireshark.lnk" Delete "$DESKTOP\Wireshark.lnk" Delete "$QUICKLAUNCH\Wireshark.lnk" RMDir "$INSTDIR\etc\gtk-2.0" RMDir "$INSTDIR\etc\pango" RMDir "$INSTDIR\etc" RMDir "$INSTDIR\lib\gtk-2.0\2.2.0\engines" RMDir "$INSTDIR\lib\gtk-2.0\2.2.0\loaders" RMDir "$INSTDIR\lib\gtk-2.0\2.2.0\immodules" RMDir "$INSTDIR\lib\gtk-2.0\2.2.0" RMDir "$INSTDIR\lib\gtk-2.0\2.4.0\engines" RMDir "$INSTDIR\lib\gtk-2.0\2.4.0\loaders" RMDir "$INSTDIR\lib\gtk-2.0\2.4.0\immodules" RMDir "$INSTDIR\lib\gtk-2.0\2.4.0" RMDir "$INSTDIR\lib\gtk-2.0\2.10.0\engines" RMDir "$INSTDIR\lib\gtk-2.0\2.10.0\loaders" RMDir "$INSTDIR\lib\gtk-2.0\2.10.0\immodules" RMDir "$INSTDIR\lib\gtk-2.0\2.10.0" RMDir "$INSTDIR\lib\gtk-2.0\modules" RMDir "$INSTDIR\lib\gtk-2.0" RMDir "$INSTDIR\lib\pango\1.2.0\modules" RMDir "$INSTDIR\lib\pango\1.2.0" RMDir "$INSTDIR\lib\pango\1.4.0\modules" RMDir "$INSTDIR\lib\pango\1.4.0" RMDir "$INSTDIR\lib\pango\1.5.0\modules" RMDir "$INSTDIR\lib\pango\1.5.0" RMDir "$INSTDIR\lib\pango" RMDir "$INSTDIR\lib" RMDir "$INSTDIR\share\themes\Default\gtk-2.0" RMDir "$INSTDIR\share\themes\Default" RMDir "$INSTDIR\share\themes" RMDir "$INSTDIR\share" RMDir "$SMPROGRAMS\Wireshark" RMDir "$INSTDIR\help" RMDir "$INSTDIR\diameter" RMDir "$INSTDIR\snmp\mibs" RMDir "$INSTDIR\snmp" RMDir "$INSTDIR\radius" RMDir "$INSTDIR\dtds" RMDir "$INSTDIR\tpncp" RMDir "$INSTDIR\wimaxasncp" RMDir "$INSTDIR" SectionEnd ; "Uinstall" Section "Un.Plugins" un.SecPlugins ;------------------------------------------- SectionIn 1 2 ;Delete "$INSTDIR\plugins\${VERSION}\*.*" ;Delete "$INSTDIR\plugins\*.*" ;RMDir "$INSTDIR\plugins\${VERSION}" ;RMDir "$INSTDIR\plugins" RMDir /r "$INSTDIR\plugins" SectionEnd Section "Un.Global Settings" un.SecGlobalSettings ;------------------------------------------- SectionIn 1 2 Delete "$INSTDIR\cfilters" Delete "$INSTDIR\colorfilters" Delete "$INSTDIR\dfilters" Delete "$INSTDIR\init.lua" Delete "$INSTDIR\console.lua" Delete "$INSTDIR\dtd_gen.lua" Delete "$INSTDIR\smi_modules" RMDir "$INSTDIR" SectionEnd Section /o "Un.Personal Settings" un.SecPersonalSettings ;------------------------------------------- SectionIn 2 SetShellVarContext current Delete "$APPDATA\Wireshark\*.*" RMDir "$APPDATA\Wireshark" SectionEnd ;VAR un.WINPCAP_UNINSTALL Section /o "Un.WinPcap" un.SecWinPcap ;------------------------------------------- SectionIn 2 ReadRegStr $1 HKEY_LOCAL_MACHINE "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\WinPcapInst" "UninstallString" ;IfErrors un.lbl_winpcap_notinstalled ;if RegKey is unavailable, WinPcap is not installed ;MessageBox MB_OK "WinPcap $1" ExecWait '$1' $0 DetailPrint "WinPcap uninstaller returned $0" ;SetRebootFlag true ;un.lbl_winpcap_notinstalled: SectionEnd Section "-Un.Finally" ;------------------------------------------- SectionIn 1 2 ; this test must be done after all other things uninstalled (e.g. Global Settings) IfFileExists "$INSTDIR" 0 NoFinalErrorMsg MessageBox MB_OK "Please note: The directory $INSTDIR could not be removed!" IDOK 0 ; skipped if dir doesn't exist NoFinalErrorMsg: SectionEnd ; ============================================================================ ; PLEASE MAKE SURE, THAT THE DESCRIPTIVE TEXT FITS INTO THE DESCRIPTION FIELD! ; ============================================================================ !insertmacro MUI_FUNCTION_DESCRIPTION_BEGIN !ifdef GTK_DIR !insertmacro MUI_DESCRIPTION_TEXT ${SecWireshark} "${PROGRAM_NAME} is a GUI network protocol analyzer." !endif !insertmacro MUI_DESCRIPTION_TEXT ${SecTShark} "TShark is a text based network protocol analyzer." !insertmacro MUI_DESCRIPTION_TEXT ${SecPluginsGroup} "Some plugins and extensions for both Wireshark and TShark." !insertmacro MUI_DESCRIPTION_TEXT ${SecPlugins} "Plugins with some extended dissections." !insertmacro MUI_DESCRIPTION_TEXT ${SecStatsTree} "Plugin for some extended statistics." !insertmacro MUI_DESCRIPTION_TEXT ${SecMate} "Plugin - Meta Analysis and Tracing Engine (Experimental)." !ifdef NET_SNMP_DIR !insertmacro MUI_DESCRIPTION_TEXT ${SecMIBs} "SNMP MIBs for better SNMP dissection." !endif !ifdef SMI_DIR !insertmacro MUI_DESCRIPTION_TEXT ${SecMIBs} "SNMP MIBs for better SNMP dissection." !endif !insertmacro MUI_DESCRIPTION_TEXT ${SecToolsGroup} "Additional command line based tools." !insertmacro MUI_DESCRIPTION_TEXT ${SecEditCap} "Editcap is a program that reads a capture file and writes some or all of the packets into another capture file." !insertmacro MUI_DESCRIPTION_TEXT ${SecText2Pcap} "Text2pcap is a program that reads in an ASCII hex dump and writes the data into a libpcap-style capture file." !insertmacro MUI_DESCRIPTION_TEXT ${SecMergecap} "Mergecap is a program that combines multiple saved capture files into a single output file" !insertmacro MUI_DESCRIPTION_TEXT ${SecCapinfos} "Capinfos is a program that provides information on capture files." !insertmacro MUI_DESCRIPTION_TEXT ${SecRawshark} "Rawshark is a raw packet filter." !ifdef HHC_DIR !insertmacro MUI_DESCRIPTION_TEXT ${SecUsersGuide} "Install the user's guide, so an internet connection is not required to read the help pages." !endif !insertmacro MUI_FUNCTION_DESCRIPTION_END !insertmacro MUI_UNFUNCTION_DESCRIPTION_BEGIN !insertmacro MUI_DESCRIPTION_TEXT ${un.SecUinstall} "Uninstall all Wireshark components." !insertmacro MUI_DESCRIPTION_TEXT ${un.SecPlugins} "Uninstall all Plugins (even from previous Wireshark versions)." !insertmacro MUI_DESCRIPTION_TEXT ${un.SecGlobalSettings} "Uninstall global settings like: $INSTDIR\cfilters" !insertmacro MUI_DESCRIPTION_TEXT ${un.SecPersonalSettings} "Uninstall personal settings like your preferences file from your profile: $PROFILE." !insertmacro MUI_DESCRIPTION_TEXT ${un.SecWinPcap} "Call WinPcap's uninstall program." !insertmacro MUI_UNFUNCTION_DESCRIPTION_END ; ============================================================================ ; Callback functions ; ============================================================================ !ifdef GTK_DIR ; Disable File extensions if Wireshark isn't selected Function .onSelChange Push $0 SectionGetFlags ${SecWireshark} $0 IntOp $0 $0 & 1 IntCmp $0 0 onSelChange.unselect WriteINIStr "$PLUGINSDIR\AdditionalTasksPage.ini" "Field 6" "State" 1 WriteINIStr "$PLUGINSDIR\AdditionalTasksPage.ini" "Field 6" "Flags" "" WriteINIStr "$PLUGINSDIR\AdditionalTasksPage.ini" "Field 7" "Flags" "" Goto onSelChange.end onSelChange.unselect: WriteINIStr "$PLUGINSDIR\AdditionalTasksPage.ini" "Field 6" "State" 0 WriteINIStr "$PLUGINSDIR\AdditionalTasksPage.ini" "Field 6" "Flags" "DISABLED" WriteINIStr "$PLUGINSDIR\AdditionalTasksPage.ini" "Field 7" "Flags" "DISABLED" Goto onSelChange.end onSelChange.end: Pop $0 FunctionEnd !endif !include "GetWindowsVersion.nsh" !include WinMessages.nsh !include "VersionCompare.nsh" Var NPF_START ; NPF service registry key Var WINPCAP_NAME ; DisplayName from WinPcap installation Var WINPCAP_VERSION ; DisplayVersion from WinPcap installation Function myShowCallback ; Get the Windows version Call GetWindowsVersion Pop $R0 ; Windows Version ; Check if we're able to run with this version StrCmp $R0 '95' lbl_winversion_unsupported StrCmp $R0 '98' lbl_winversion_unsupported StrCmp $R0 'ME' lbl_winversion_unsupported StrCmp $R0 'NT 4.0' lbl_winversion_unsupported_nt4 Goto lbl_winversion_supported lbl_winversion_unsupported: MessageBox MB_OK \ "Windows $R0 is no longer supported. The last known version working with 98/ME was Ethereal 0.99.0!" \ /SD IDOK Quit lbl_winversion_unsupported_nt4: MessageBox MB_OK \ "Windows $R0 is no longer supported. The last known version working with NT 4.0 was Wireshark 0.99.4!" \ /SD IDOK Quit lbl_winversion_supported: ; detect if WinPcap should be installed WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 4" "Text" "Install WinPcap 4.1 beta5" ReadRegStr $WINPCAP_NAME HKEY_LOCAL_MACHINE "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\WinPcapInst" "DisplayName" IfErrors 0 lbl_winpcap_installed ;if RegKey is available, WinPcap is already installed WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 2" "Text" "WinPcap is currently not installed" WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 2" "Flags" "DISABLED" WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 5" "Text" "(Use Add/Remove Programs first to uninstall any undetected old WinPcap versions)" Goto lbl_winpcap_done lbl_winpcap_installed: WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 2" "Text" "$WINPCAP_NAME" ; Compare the installed build against the one we have. ReadRegStr $WINPCAP_VERSION HKEY_LOCAL_MACHINE "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\WinPcapInst" "DisplayVersion" StrCmp $WINPCAP_VERSION "" lbl_winpcap_do_install ; WinPcap is really old(?) or installed improperly. ${VersionCompare} $WINPCAP_VERSION "4.0.0.1452" $1 ; WinPcap 4.1 beta5 StrCmp $1 "2" lbl_winpcap_do_install ;lbl_winpcap_dont_install: ; The installed version is >= to what we have, so don't install WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 4" "State" "0" WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 5" "Text" "If selected, the currently installed $WINPCAP_NAME will be uninstalled first." Goto lbl_winpcap_done ;lbl_winpcap_dont_upgrade: ; force the user to upgrade by hand WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 4" "State" "0" WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 4" "Flags" "DISABLED" WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 5" "Text" "If you wish to install WinPcap 4.1 beta5, please uninstall $WINPCAP_NAME manually first." WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 5" "Flags" "DISABLED" Goto lbl_winpcap_done lbl_winpcap_do_install: ; seems to be an old version, install newer one WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 4" "State" "1" WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 5" "Text" "The currently installed $WINPCAP_NAME will be uninstalled first." lbl_winpcap_done: ; Disable NPF service setting for Win OT StrCmp $R0 '95' lbl_npf_disable StrCmp $R0 '98' lbl_npf_disable StrCmp $R0 'ME' lbl_npf_disable ; Enable NPF by default under Vista. StrCmp $R0 'Vista' lbl_npf_enable ReadRegDWORD $NPF_START HKEY_LOCAL_MACHINE "SYSTEM\CurrentControlSet\Services\NPF" "Start" ; (Winpcap may not be installed already, so no regKey is no error here) IfErrors lbl_npf_done ;RegKey not available, so do not set it IntCmp $NPF_START 2 0 lbl_npf_done lbl_npf_done lbl_npf_enable: WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 8" "State" "1" Goto lbl_npf_done ;disable lbl_npf_disable: WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 8" "State" "0" WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 8" "Flags" "DISABLED" WriteINIStr "$PLUGINSDIR\WinPcapPage.ini" "Field 9" "Flags" "DISABLED" lbl_npf_done: ; if Wireshark was previously installed, unselect previously not installed icons etc. ; detect if Wireshark is already installed -> ReadRegStr $0 HKEY_LOCAL_MACHINE "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Wireshark" "UninstallString" IfErrors lbl_wireshark_notinstalled ;if RegKey is unavailable, Wireshark is not installed ; only select Start Menu Group, if previously installed ; (we use the "all users" start menu, so select it first) SetShellVarContext all IfFileExists "$SMPROGRAMS\Wireshark\Wireshark.lnk" lbl_have_startmenu IfFileExists "$SMPROGRAMS\Wireshark.lnk" lbl_have_startmenu WriteINIStr "$PLUGINSDIR\AdditionalTasksPage.ini" "Field 2" "State" "0" lbl_have_startmenu: ; only select Desktop Icon, if previously installed IfFileExists "$DESKTOP\Wireshark.lnk" lbl_have_desktopicon WriteINIStr "$PLUGINSDIR\AdditionalTasksPage.ini" "Field 3" "State" "0" lbl_have_desktopicon: ; only select Quick Launch Icon, if previously installed IfFileExists "$QUICKLAUNCH\Wireshark.lnk" lbl_have_quicklaunchicon WriteINIStr "$PLUGINSDIR\AdditionalTasksPage.ini" "Field 4" "State" "0" lbl_have_quicklaunchicon: lbl_wireshark_notinstalled: FunctionEnd