+/* Copyright (C) 1995-1998 Samba-Team */
+/* Copyright (C) 1998 John H Terpstra <jht@aquasoft.com.au> */
+
/* local definitions for file server */
#ifndef _LOCAL_H
#define _LOCAL_H
+/* The default workgroup - usually overridden in smb.conf */
+#ifndef WORKGROUP
+#define WORKGROUP "WORKGROUP"
+#endif
+
+/* the maximum debug level to compile into the code. This assumes a good
+ optimising compiler that can remove unused code
+ for embedded or low-memory systems set this to a value like 2 to get
+ only important messages. This gives *much* smaller binaries
+*/
+#ifndef MAX_DEBUG_LEVEL
+#define MAX_DEBUG_LEVEL 1000
+#endif
+
/* This defines the section name in the configuration file that will contain */
/* global parameters - that is, parameters relating to the whole server, not */
/* just services. This name is then reserved, and may not be used as a */
refer to the special "printers" service */
#define PRINTERS_NAME "printers"
-/* This defines the name of the printcap file. It is MOST UNLIKELY that
- this will change BUT! Specifying a file with the format of a printcap
- file but containing only a subset of the printers actually in your real
- printcap file is a quick-n-dirty way to allow dynamic access to a subset
- of available printers.
-*/
-#define PRINTCAP_NAME "/etc/printcap"
-
-/* set these to define the limits of the server. NOTE These are on a
- per-client basis. Thus any one machine can't connect to more than
- MAX_CONNECTIONS services, but any number of machines may connect at
- one time. */
-#define MAX_CONNECTIONS 127
-#define MAX_OPEN_FILES 100
-
-/* the max number of connections that the smbstatus program will show */
-#define MAXSTATUS 1000
+/* Yves Gaige <yvesg@hptnodur.grenoble.hp.com> requested this set this */
+/* to a maximum of 8 if old smb clients break because of long printer names. */
+#define MAXPRINTERLEN 15
/* max number of directories open at once */
/* note that with the new directory code this no longer requires a
file handle per directory, but large numbers do use more memory */
-#define MAXDIR 64
+#define MAX_OPEN_DIRECTORIES 256
+
+/* max number of directory handles */
+/* As this now uses the bitmap code this can be
+ quite large. */
+#define MAX_DIRECTORY_HANDLES 2048
+
+/* maximum number of file caches per smbd */
+#define MAX_WRITE_CACHES 10
+
+/* define what facility to use for syslog */
+#ifndef SYSLOG_FACILITY
+#define SYSLOG_FACILITY LOG_DAEMON
+#endif
+
+/*
+ * Default number of maximum open files per smbd. This is
+ * also limited by the maximum available file descriptors
+ * per process and can also be set in smb.conf as "max open files"
+ * in the [global] section.
+ */
+
+#ifndef MAX_OPEN_FILES
+#define MAX_OPEN_FILES 10000
+#endif
+
+/* the max number of simultanous connections to the server by all clients */
+/* zero means no limit. */
+#define MAXSTATUS 0
#define WORDMAX 0xFFFF
#define MAX_PASS_LEN 200
/* separators for lists */
-#define LIST_SEP " \t,;:\n\r"
+#define LIST_SEP " \t,;\n\r"
-#ifndef LOCKDIR
-/* this should have been set in the Makefile */
-#define LOCKDIR "/tmp/samba"
-#endif
+/* wchar separators for lists */
+#define LIST_SEP_W wchar_list_sep
/* this is where browse lists are kept in the lock dir */
#define SERVER_LIST "browse.dat"
-/* shall guest entries in printer queues get changed to user entries,
- so they can be deleted using the windows print manager? */
-#define LPQ_GUEST_TO_USER
-
/* shall filenames with illegal chars in them get mangled in long
filename listings? */
#define MANGLE_LONG_FILENAMES
/* the size of the directory cache */
#define DIRCACHESIZE 20
-/* what type of filesystem do we want this to show up as in a NT file
- manager window? */
-#define FSTYPE_STRING "Samba"
+/* what default type of filesystem do we want this to show up as in a
+ NT file manager window? */
+#define FSTYPE_STRING "NTFS"
-/* do you want smbd to send a 1 byte packet to nmbd to trigger it to start
- when smbd starts? */
-#ifndef PRIME_NMBD
-#define PRIME_NMBD 1
+/* the default guest account - normally set in the Makefile or smb.conf */
+#ifndef GUEST_ACCOUNT
+#define GUEST_ACCOUNT "nobody"
#endif
-/* do you want session setups at user level security with a invalid
- password to be rejected or allowed in as guest? WinNT rejects them
- but it can be a pain as it means "net view" needs to use a password
-
- You have 3 choices:
-
- GUEST_SESSSETUP = 0 means session setups with an invalid password
- are rejected.
-
- GUEST_SESSSETUP = 1 means session setups with an invalid password
- are rejected, unless the username does not exist, in which case it
- is treated as a guest login
-
- GUEST_SESSSETUP = 2 means session setups with an invalid password
- are treated as a guest login
-
- Note that GUEST_SESSSETUP only has an effect in user or server
- level security.
- */
-#ifndef GUEST_SESSSETUP
-#define GUEST_SESSSETUP 0
+/* user to test password server with as invalid in security=server mode. */
+#ifndef INVALID_USER_PREFIX
+#define INVALID_USER_PREFIX "sambatest"
#endif
/* the default pager to use for the client "more" command. Users can
/* the following control timings of various actions. Don't change
them unless you know what you are doing. These are all in seconds */
#define DEFAULT_SMBD_TIMEOUT (60*60*24*7)
-#define SMBD_RELOAD_CHECK (60)
+#define SMBD_RELOAD_CHECK (180)
#define IDLE_CLOSED_TIMEOUT (60)
#define DPTR_IDLE_TIMEOUT (120)
-#define SMBD_SELECT_LOOP (10)
+#define SMBD_SELECT_TIMEOUT (60)
+#define SMBD_SELECT_TIMEOUT_WITH_PENDING_LOCKS (10)
#define NMBD_SELECT_LOOP (10)
#define BROWSE_INTERVAL (60)
#define REGISTRATION_INTERVAL (10*60)
#define NMBD_INETD_TIMEOUT (120)
#define NMBD_MAX_TTL (24*60*60)
#define LPQ_LOCK_TIMEOUT (5)
+#define NMBD_INTERFACES_RELOAD (120)
+#define NMBD_UNEXPECTED_TIMEOUT (15)
/* the following are in milliseconds */
#define LOCK_RETRY_TIMEOUT (100)
accessible to root */
#define DUMP_CORE 1
-/* what is the longest significant password available on your system?
- Knowing this speeds up password searches a lot */
-#ifndef PASSWORD_LENGTH
-#define PASSWORD_LENGTH 8
-#endif
-
-#define SMB_ALIGNMENT 1
-
-
/* shall we support browse requests via a FIFO to nmbd? */
#define ENABLE_FIFO 1
-/* how long to wait for a socket connect to happen */
-#define LONG_CONNECT_TIMEOUT 30
-#define SHORT_CONNECT_TIMEOUT 5
+/* how long (in miliseconds) to wait for a socket connect to happen */
+#define LONG_CONNECT_TIMEOUT 30000
+#define SHORT_CONNECT_TIMEOUT 5000
+/* the default netbios keepalive timeout */
+#define DEFAULT_KEEPALIVE 300
/* the directory to sit in when idle */
/* #define IDLE_DIR "/" */
it are worked out */
#define USE_READ_PREDICTION 0
+/* name of directory that netatalk uses to store macintosh resource forks */
+#define APPLEDOUBLE ".AppleDouble/"
+
+/*
+ * Default passwd chat script.
+ */
+
+#define DEFAULT_PASSWD_CHAT "*new*password* %n\\n *new*password* %n\\n *changed*"
+
+/* Minimum length of allowed password when changing UNIX password. */
+#define MINPASSWDLENGTH 5
+
+/* maximum ID number used for session control. This cannot be larger
+ than 62*62 for the current code */
+#define MAX_SESSION_ID 3000
+
+#ifndef SESSION_TEMPLATE
+#define SESSION_TEMPLATE "smb/%d"
+#endif
+
+/* the maximum age in seconds of a password. Should be a lp_ parameter */
+#define MAX_PASSWORD_AGE (21*24*60*60)
+
+/* Allocation roundup. */
+#define SMB_ROUNDUP_ALLOCATION_SIZE 0x100000
+
+/* shall we deny oplocks to clients that get timeouts? */
+#define FASCIST_OPLOCK_BACKOFF 1
+
+/* this enables the "rabbit pellet" fix for SMBwritebraw */
+#define RABBIT_PELLET_FIX 1
+
#endif
git.samba.org / nivanova / samba-autobuild / .git / blobdiff