use Cwd qw(abs_path);
use FindBin qw($RealBin);
use POSIX;
-
-sub binpath($$)
-{
- my ($self, $binary) = @_;
-
- if (defined($self->{bindir})) {
- my $path = "$self->{bindir}/$binary";
- -f $path or die("File $path doesn't exist");
- return $path;
- }
-
- return $binary;
+use target::Samba;
+
+sub have_ads($) {
+ my ($self) = @_;
+ my $found_ads = 0;
+ my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
+ open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
+
+ while (<IN>) {
+ if (/WITH_ADS/) {
+ $found_ads = 1;
+ }
+ }
+ close IN;
+
+ # If we were not built with ADS support, pretend we were never even available
+ return $found_ads;
}
sub new($$) {
- my ($classname, $bindir, $srcdir) = @_;
- my $self = { bindir => $bindir,
- srcdir => $srcdir
+ my ($classname, $bindir, $binary_mapping, $srcdir, $server_maxtime) = @_;
+ my $self = { vars => {},
+ bindir => $bindir,
+ binary_mapping => $binary_mapping,
+ srcdir => $srcdir,
+ server_maxtime => $server_maxtime
};
bless $self;
return $self;
{
my ($self, $envname, $path) = @_;
- if ($envname eq "dc") {
- return $self->setup_dc("$path/dc");
+ if (defined($self->{vars}->{$envname})) {
+ return $self->{vars}->{$envname};
+ }
+
+ if ($envname eq "s3dc") {
+ return $self->setup_s3dc("$path/s3dc");
} elsif ($envname eq "secshare") {
return $self->setup_secshare("$path/secshare");
+ } elsif ($envname eq "maptoguest") {
+ return $self->setup_maptoguest("$path/maptoguest");
+ } elsif ($envname eq "ktest") {
+ return $self->setup_ktest("$path/ktest");
} elsif ($envname eq "secserver") {
- if (not defined($self->{vars}->{dc})) {
- $self->setup_dc("$path/dc");
+ if (not defined($self->{vars}->{s3dc})) {
+ if (not defined($self->setup_s3dc("$path/s3dc"))) {
+ return undef;
+ }
}
- return $self->setup_secserver("$path/secserver", $self->{vars}->{dc});
+ return $self->setup_secserver("$path/secserver", $self->{vars}->{s3dc});
} elsif ($envname eq "member") {
- if (not defined($self->{vars}->{dc})) {
- $self->setup_dc("$path/dc");
+ if (not defined($self->{vars}->{s3dc})) {
+ if (not defined($self->setup_s3dc("$path/s3dc"))) {
+ return undef;
+ }
}
- return $self->setup_member("$path/member", $self->{vars}->{dc});
+ return $self->setup_member("$path/member", $self->{vars}->{s3dc});
} else {
- return undef;
+ return "UNKNOWN";
}
}
-sub setup_dc($$)
+sub setup_s3dc($$)
{
my ($self, $path) = @_;
- print "PROVISIONING DC...";
+ print "PROVISIONING S3DC...";
- my $dc_options = "
+ my $s3dc_options = "
domain master = yes
domain logons = yes
lanman auth = yes
";
my $vars = $self->provision($path,
- "LOCALDC2",
+ "LOCALS3DC2",
2,
- "localdc2pass",
- $dc_options);
+ "locals3dc2pass",
+ $s3dc_options);
+
+ $vars or return undef;
$self->check_or_start($vars,
- ($ENV{SMBD_MAXTIME} or 2700),
"yes", "yes", "yes");
- $self->wait_for_start($vars);
+ if (not $self->wait_for_start($vars)) {
+ return undef;
+ }
$vars->{DC_SERVER} = $vars->{SERVER};
$vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
$vars->{DC_USERNAME} = $vars->{USERNAME};
$vars->{DC_PASSWORD} = $vars->{PASSWORD};
- $self->{vars}->{dc} = $vars;
+ $self->{vars}->{s3dc} = $vars;
return $vars;
}
sub setup_member($$$)
{
- my ($self, $prefix, $dcvars) = @_;
+ my ($self, $prefix, $s3dcvars) = @_;
print "PROVISIONING MEMBER...";
"localmember3pass",
$member_options);
- $ret or die("Unable to provision");
+ $ret or return undef;
- my $net = $self->binpath("net");
+ my $net = Samba::bindir_path($self, "net");
my $cmd = "";
$cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
- $cmd .= "$net join $ret->{CONFIGURATION} $dcvars->{DOMAIN} member";
+ $cmd .= "$net join $ret->{CONFIGURATION} $s3dcvars->{DOMAIN} member";
+ $cmd .= " -U$s3dcvars->{USERNAME}\%$s3dcvars->{PASSWORD}";
+
+ if (system($cmd) != 0) {
+ warn("Join failed\n$cmd");
+ return undef;
+ }
+
+ $self->check_or_start($ret, "yes", "yes", "yes");
+
+ if (not $self->wait_for_start($ret)) {
+ return undef;
+ }
+
+ $ret->{DC_SERVER} = $s3dcvars->{SERVER};
+ $ret->{DC_SERVER_IP} = $s3dcvars->{SERVER_IP};
+ $ret->{DC_NETBIOSNAME} = $s3dcvars->{NETBIOSNAME};
+ $ret->{DC_USERNAME} = $s3dcvars->{USERNAME};
+ $ret->{DC_PASSWORD} = $s3dcvars->{PASSWORD};
+
+ return $ret;
+}
+
+sub setup_admember($$$$)
+{
+ my ($self, $prefix, $dcvars, $iface) = @_;
+
+ # If we didn't build with ADS, pretend this env was never available
+ if (not $self->have_ads()) {
+ return "UNKNOWN";
+ }
+
+ print "PROVISIONING S3 AD MEMBER$iface...";
+
+ my $member_options = "
+ security = ads
+ server signing = on
+ workgroup = $dcvars->{DOMAIN}
+ realm = $dcvars->{REALM}
+";
+
+ my $ret = $self->provision($prefix,
+ "LOCALADMEMBER$iface",
+ $iface,
+ "loCalMember${iface}Pass",
+ $member_options);
+
+ $ret or return undef;
+
+ close(USERMAP);
+ $ret->{DOMAIN} = $dcvars->{DOMAIN};
+ $ret->{REALM} = $dcvars->{REALM};
+
+ my $ctx;
+ my $prefix_abs = abs_path($prefix);
+ $ctx = {};
+ $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
+ $ctx->{domain} = $dcvars->{DOMAIN};
+ $ctx->{realm} = $dcvars->{REALM};
+ $ctx->{dnsname} = lc($dcvars->{REALM});
+ $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
+ Samba::mk_krb5_conf($ctx, "");
+
+ $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
+
+ my $net = Samba::bindir_path($self, "net");
+ my $cmd = "";
+ $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
+ $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
+ $cmd .= "$net join $ret->{CONFIGURATION}";
$cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
- system($cmd) == 0 or die("Join failed\n$cmd");
+ if (system($cmd) != 0) {
+ warn("Join failed\n$cmd");
+ return undef;
+ }
+
+ # We need world access to this share, as otherwise the domain
+ # administrator from the AD domain provided by Samba4 can't
+ # access the share for tests.
+ chmod 0777, "$prefix/share";
$self->check_or_start($ret,
- ($ENV{SMBD_MAXTIME} or 2700),
- "yes", "yes", "yes");
+ "yes", "yes", "yes");
$self->wait_for_start($ret);
$ret->{DC_USERNAME} = $dcvars->{USERNAME};
$ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
+ # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
+ $ret->{target} = $self;
+
return $ret;
}
"local4pass",
$secshare_options);
- $self->check_or_start($vars,
- ($ENV{SMBD_MAXTIME} or 2700),
- "yes", "no", "yes");
+ $vars or return undef;
+
+ $self->check_or_start($vars, "yes", "no", "yes");
- $self->wait_for_start($vars);
+ if (not $self->wait_for_start($vars)) {
+ return undef;
+ }
$self->{vars}->{secshare} = $vars;
sub setup_secserver($$$)
{
- my ($self, $prefix, $dcvars) = @_;
+ my ($self, $prefix, $s3dcvars) = @_;
print "PROVISIONING server with security=server...";
my $secserver_options = "
security = server
- password server = $dcvars->{SERVER_IP}
+ password server = $s3dcvars->{SERVER_IP}
";
my $ret = $self->provision($prefix,
"localserver5pass",
$secserver_options);
- $ret or die("Unable to provision");
+ $ret or return undef;
- $self->check_or_start($ret,
- ($ENV{SMBD_MAXTIME} or 2700),
- "yes", "no", "yes");
+ $self->check_or_start($ret, "yes", "no", "yes");
- $self->wait_for_start($ret);
+ if (not $self->wait_for_start($ret)) {
+ return undef;
+ }
- $ret->{DC_SERVER} = $dcvars->{SERVER};
- $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
- $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
- $ret->{DC_USERNAME} = $dcvars->{USERNAME};
- $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
+ $ret->{DC_SERVER} = $s3dcvars->{SERVER};
+ $ret->{DC_SERVER_IP} = $s3dcvars->{SERVER_IP};
+ $ret->{DC_NETBIOSNAME} = $s3dcvars->{NETBIOSNAME};
+ $ret->{DC_USERNAME} = $s3dcvars->{USERNAME};
+ $ret->{DC_PASSWORD} = $s3dcvars->{PASSWORD};
return $ret;
}
+sub setup_ktest($$$)
+{
+ my ($self, $prefix) = @_;
+
+ # If we didn't build with ADS, pretend this env was never available
+ if (not $self->have_ads()) {
+ return "UNKNOWN";
+ }
+
+ print "PROVISIONING server with security=ads...";
+
+ my $ktest_options = "
+ workgroup = KTEST
+ realm = ktest.samba.example.com
+ security = ads
+ username map = $prefix/lib/username.map
+ server signing = required
+";
+
+ my $ret = $self->provision($prefix,
+ "LOCALKTEST6",
+ 6,
+ "localktest6pass",
+ $ktest_options);
+
+ $ret or return undef;
+
+ my $ctx;
+ my $prefix_abs = abs_path($prefix);
+ $ctx = {};
+ $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
+ $ctx->{domain} = "KTEST";
+ $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
+ $ctx->{dnsname} = lc($ctx->{realm});
+ $ctx->{kdc_ipv4} = "0.0.0.0";
+ Samba::mk_krb5_conf($ctx, "");
+
+ $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
+
+ open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
+ print USERMAP "
+$ret->{USERNAME} = KTEST\\Administrator
+";
+ close(USERMAP);
+
+#This is the secrets.tdb created by 'net ads join' from Samba3 to a
+#Samba4 DC with the same parameters as are being used here. The
+#domain SID is S-1-5-21-1071277805-689288055-3486227160
+
+ system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
+ chmod 0600, "$prefix/private/secrets.tdb";
+
+#This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
+# "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
+#
+#and having in krb5.conf:
+# ticket_lifetime = 799718400
+# renew_lifetime = 799718400
+#
+# The commands for the -2 keytab where were:
+# kinit administrator@KTEST.SAMBA.EXAMPLE.COM
+# kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
+# kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
+# kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
+# kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
+#
+# and then for the -3 keytab, I did
+#
+# net changetrustpw; kdestroy and the same again.
+#
+# This creates a credential cache with a very long lifetime (2036 at
+# at 2011-04), and shows that running 'net changetrustpw' does not
+# break existing logins (for the secrets.tdb method at least).
+#
+
+ $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
+
+ system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
+ chmod 0600, "$prefix/krb5_ccache-2";
+
+ system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
+ chmod 0600, "$prefix/krb5_ccache-3";
+
+ # We need world access to this share, as otherwise the domain
+ # administrator from the AD domain provided by ktest can't
+ # access the share for tests.
+ chmod 0777, "$prefix/share";
+
+ $self->check_or_start($ret, "yes", "no", "yes");
+
+ if (not $self->wait_for_start($ret)) {
+ return undef;
+ }
+ return $ret;
+}
+
+sub setup_maptoguest($$)
+{
+ my ($self, $path) = @_;
+
+ print "PROVISIONING maptoguest...";
+
+ my $options = "
+map to guest = bad user
+";
+
+ my $vars = $self->provision($path,
+ "maptoguest",
+ 7,
+ "maptoguestpass",
+ $options);
+
+ $vars or return undef;
+
+ $self->check_or_start($vars,
+ "yes", "no", "yes");
+
+ if (not $self->wait_for_start($vars)) {
+ return undef;
+ }
+
+ $self->{vars}->{s3maptoguest} = $vars;
+
+ return $vars;
+}
+
sub stop_sig_term($$) {
my ($self, $pid) = @_;
kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
}
sub check_or_start($$$$$) {
- my ($self, $env_vars, $maxtime, $nmbd, $winbindd, $smbd) = @_;
+ my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
+
+ # use a pipe for stdin in the child processes. This allows
+ # those processes to monitor the pipe for EOF to ensure they
+ # exit when the test script exits
+ pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
unlink($env_vars->{NMBD_TEST_LOG});
print "STARTING NMBD...";
SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
+ $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
$ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
$ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
$ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
$ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
+ $ENV{UID_WRAPPER} = "1";
+
if ($nmbd ne "yes") {
$SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
my $signame = shift;
print("Skip nmbd received signal $signame");
exit 0;
};
- sleep($maxtime);
+ sleep($self->{server_maxtime});
exit 0;
}
@optargs = split(/ /, $ENV{NMBD_OPTIONS});
}
- $ENV{MAKE_TEST_BINARY} = $self->binpath("nmbd");
+ $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
- my @preargs = ($self->binpath("timelimit"), $maxtime);
+ my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
if(defined($ENV{NMBD_VALGRIND})) {
@preargs = split(/ /, $ENV{NMBD_VALGRIND});
}
- exec(@preargs, $self->binpath("nmbd"), "-F", "--no-process-group", "-S", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start nmbd: $!");
+ close($env_vars->{STDIN_PIPE});
+ open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
+
+ exec(@preargs, Samba::bindir_path($self, "nmbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start nmbd: $!");
}
write_pid($env_vars, "nmbd", $pid);
print "DONE\n";
SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
+ $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
$ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
$ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
$ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
$ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
+ $ENV{UID_WRAPPER} = "1";
+
if ($winbindd ne "yes") {
$SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
my $signame = shift;
print("Skip winbindd received signal $signame");
exit 0;
};
- sleep($maxtime);
+ sleep($self->{server_maxtime});
exit 0;
}
@optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
}
- $ENV{MAKE_TEST_BINARY} = $self->binpath("winbindd");
+ $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
- my @preargs = ($self->binpath("timelimit"), $maxtime);
+ my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
if(defined($ENV{WINBINDD_VALGRIND})) {
@preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
}
- exec(@preargs, $self->binpath("winbindd"), "-F", "--no-process-group", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start winbindd: $!");
+ print "Starting winbindd with config $env_vars->{SERVERCONFFILE}\n";
+
+ close($env_vars->{STDIN_PIPE});
+ open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
+
+ exec(@preargs, Samba::bindir_path($self, "winbindd"), "-F", "--no-process-group", "--stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start winbindd: $!");
}
write_pid($env_vars, "winbindd", $pid);
print "DONE\n";
SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
+ $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
$ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
$ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
$ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
$ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
+ $ENV{UID_WRAPPER} = "1";
+
if ($smbd ne "yes") {
$SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
my $signame = shift;
print("Skip smbd received signal $signame");
exit 0;
};
- sleep($maxtime);
+ sleep($self->{server_maxtime});
exit 0;
}
- $ENV{MAKE_TEST_BINARY} = $self->binpath("smbd");
+ $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
my @optargs = ("-d0");
if (defined($ENV{SMBD_OPTIONS})) {
@optargs = split(/ /, $ENV{SMBD_OPTIONS});
}
- my @preargs = ($self->binpath("timelimit"), $maxtime);
+ my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
if(defined($ENV{SMBD_VALGRIND})) {
@preargs = split(/ /,$ENV{SMBD_VALGRIND});
}
- exec(@preargs, $self->binpath("smbd"), "-F", "--no-process-group", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start smbd: $!");
+
+ close($env_vars->{STDIN_PIPE});
+ open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
+
+ exec(@preargs, Samba::bindir_path($self, "smbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start smbd: $!");
}
write_pid($env_vars, "smbd", $pid);
print "DONE\n";
+ close(STDIN_READER);
+
return 0;
}
-sub provision($$$$$$)
+sub provision($$$$$$$)
{
- my ($self, $prefix, $server, $swiface, $password, $extra_options) = @_;
+ my ($self, $prefix, $server, $swiface, $password, $extra_options, $no_delete_prefix) = @_;
##
## setup the various environment variables we need
my $bindir_abs = abs_path($self->{bindir});
my $vfs_modulesdir_abs = ($ENV{VFSLIBDIR} or $bindir_abs);
+ my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
+
my @dirs = ();
my $shrdir="$prefix_abs/share";
mkdir($prefix_abs, 0777);
print "CREATE TEST ENVIRONMENT IN '$prefix'...";
- system("rm -rf $prefix_abs/*");
+ if (not defined($no_delete_prefix) or not $no_delete_prefix) {
+ system("rm -rf $prefix_abs/*");
+ }
mkdir($_, 0777) foreach(@dirs);
##
chmod 0755, $ro_shrdir;
my $unreadable_file = "$ro_shrdir/unreadable_file";
- open(UNREADABLE_FILE, ">$unreadable_file") or die("Unable to open $unreadable_file");
+ unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
+ warn("Unable to open $unreadable_file");
+ return undef;
+ }
close(UNREADABLE_FILE);
chmod 0600, $unreadable_file;
my $msdfs_target = "$ro_shrdir/msdfs-target";
- open(MSDFS_TARGET, ">$msdfs_target") or die("Unable to open $msdfs_target");
+ unless (open(MSDFS_TARGET, ">$msdfs_target")) {
+ warn("Unable to open $msdfs_target");
+ return undef;
+ }
close(MSDFS_TARGET);
chmod 0666, $msdfs_target;
symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/msdfs-src1";
## create conffile
##
- open(CONF, ">$conffile") or die("Unable to open $conffile");
+ unless (open(CONF, ">$conffile")) {
+ warn("Unable to open $conffile");
+ return undef;
+ }
print CONF "
[global]
netbios name = $server
pid directory = $piddir
lock directory = $lockdir
log file = $logdir/log.\%m
- log level = 0
+ log level = 1
debug pid = yes
-
- name resolve order = bcast
+ max log size = 0
state directory = $lockdir
cache directory = $lockdir
map readonly = no
store dos attributes = yes
create mask = 755
+ dos filemode = yes
vfs objects = $vfs_modulesdir_abs/xattr_tdb.so $vfs_modulesdir_abs/streams_depot.so
printing = vlp
queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
lpq cache time = 0
- ncalrpc dir = $lockdir/ncalrpc
- rpc_server:epmapper = embedded
+ ncalrpc dir = $prefix_abs/ncalrpc
+ rpc_server:epmapper = external
+ rpc_server:spoolss = external
+ rpc_server:lsarpc = external
+ rpc_server:samr = external
+ rpc_server:netlogon = external
+ rpc_server:tcpip = yes
+
+ rpc_daemon:epmd = fork
+ rpc_daemon:spoolssd = fork
+ rpc_daemon:lsasd = fork
+
+ resolv:host file = $dns_host_file
+
+ # The samba3.blackbox.smbclient_s3 test uses this to test that
+ # sending messages works, and that the %m sub works.
+ message command = mv %s $shrdir/message.%m
# Begin extra options
$extra_options
print CONF "
[tmp]
path = $shrdir
+ comment = smb username is [%U]
[tmpguest]
path = $shrdir
guest ok = yes
copy = print1
[lp]
copy = print1
+[xcopy_share]
+ path = $shrdir
+ comment = smb username is [%U]
+ create mask = 777
+ force create mode = 777
[print\$]
copy = tmp
";
## create a test account
##
- open(PASSWD, ">$nss_wrapper_passwd") or die("Unable to open $nss_wrapper_passwd");
+ unless (open(PASSWD, ">$nss_wrapper_passwd")) {
+ warn("Unable to open $nss_wrapper_passwd");
+ return undef;
+ }
print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
$unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
";
}
close(PASSWD);
- open(GROUP, ">$nss_wrapper_group") or die("Unable to open $nss_wrapper_group");
+ unless (open(GROUP, ">$nss_wrapper_group")) {
+ warn("Unable to open $nss_wrapper_group");
+ return undef;
+ }
print GROUP "nobody:x:$gid_nobody:
nogroup:x:$gid_nogroup:nobody
$unix_name-group:x:$unix_gids[0]:
$ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
$ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
- open(PWD, "|".$self->binpath("smbpasswd")." -c $conffile -L -s -a $unix_name >/dev/null");
+ my $cmd = Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
+ unless (open(PWD, "|$cmd")) {
+ warn("Unable to set password for test account\n$cmd");
+ return undef;
+ }
print PWD "$password\n$password\n";
- close(PWD) or die("Unable to set password for test account");
-
+ unless (close(PWD)) {
+ warn("Unable to set password for test account\n$cmd");
+ return undef;
+ }
print "DONE\n";
+ open(HOSTS, ">>$ENV{SELFTEST_PREFIX}/dns_host_file") or die("Unable to open $ENV{SELFTEST_PREFIX}/dns_host_file");
+ print HOSTS "A $server. $server_ip
+";
+ close(HOSTS);
+
$ret{SERVER_IP} = $server_ip;
$ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
$ret{NMBD_TEST_LOG_POS} = 0;
$ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
$ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
$ret{NSS_WRAPPER_WINBIND_SO_PATH} = $ENV{NSS_WRAPPER_WINBIND_SO_PATH};
+ if (not defined($ret{NSS_WRAPPER_WINBIND_SO_PATH})) {
+ $ret{NSS_WRAPPER_WINBIND_SO_PATH} = Samba::bindir_path($self, "default/nsswitch/libnss-winbind.so");
+ }
$ret{LOCAL_PATH} = "$shrdir";
return \%ret;
print "delaying for nbt name registration\n";
sleep(10);
# This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
- system($self->binpath("nmblookup") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
- system($self->binpath("nmblookup") ." $envvars->{CONFIGURATION} __SAMBA__");
- system($self->binpath("nmblookup") ." $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
- system($self->binpath("nmblookup") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
- system($self->binpath("nmblookup") ." $envvars->{CONFIGURATION} $envvars->{SERVER}");
+ system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
+ system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} __SAMBA__");
+ system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
+ system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
+ system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} $envvars->{SERVER}");
+
# make sure smbd is also up set
print "wait for smbd\n";
- system($self->binpath("smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER_IP} -U% -p 139 | head -2");
- system($self->binpath("smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER_IP} -U% -p 139 | head -2");
+ my $count = 0;
+ my $ret;
+ do {
+ $ret = system(Samba::bindir_path($self, "smbclient3") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
+ if ($ret != 0) {
+ sleep(2);
+ }
+ $count++
+ } while ($ret != 0 && $count < 10);
+ if ($count == 10) {
+ print "SMBD failed to start up in a reasonable time (20sec)\n";
+ teardown_env($self, $envvars);
+ return 0;
+ }
# Ensure we have domain users mapped.
- system($self->binpath("net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
+ $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
+ if ($ret != 0) {
+ return 1;
+ }
print $self->getlog_env($envvars);
+
+ return 1;
}
1;
git.samba.org / nivanova / samba-autobuild / .git / blobdiff