selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         print "smbd does not have ADS support\n" unless $found_ads;
  29         return $found_ads;
  30 }
  31
  32 # return smb.conf parameters applicable to @path, based on the underlying
  33 # filesystem type
  34 sub get_fs_specific_conf($$)
  35 {
  36         my ($self, $path) = @_;
  37         my $mods = "";
  38         my $stat_out = `stat --file-system $path` or return "";
  39
  40         if ($stat_out =~ m/Type:\s+btrfs/) {
  41                 $mods .= "btrfs ";
  42         }
  43
  44         if ($mods) {
  45                 return "vfs objects = $mods";
  46         }
  47
  48         return undef;
  49 }
  50
  51 sub new($$) {
  52         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  53         my $self = { vars => {},
  54                      bindir => $bindir,
  55                      srcdir => $srcdir,
  56                      server_maxtime => $server_maxtime
  57         };
  58         bless $self;
  59         return $self;
  60 }
  61
  62 sub teardown_env($$)
  63 {
  64         my ($self, $envvars) = @_;
  65         my $count = 0;
  66
  67         # This should cause smbd to terminate gracefully
  68         close($envvars->{STDIN_PIPE});
  69
  70         my $smbdpid = $envvars->{SMBD_TL_PID};
  71         my $nmbdpid = $envvars->{NMBD_TL_PID};
  72         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  73
  74         # This should give it time to write out the gcov data
  75         until ($count > 20) {
  76             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  77             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  78             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  79             if ($smbdchild == -1
  80                 && $nmbdchild == -1
  81                 && $winbinddchild == -1) {
  82                 last;
  83             }
  84             sleep(1);
  85             $count++;
  86         }
  87
  88         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  89             return;
  90         }
  91
  92         $self->stop_sig_term($smbdpid);
  93         $self->stop_sig_term($nmbdpid);
  94         $self->stop_sig_term($winbinddpid);
  95
  96         $count = 0;
  97         until ($count > 10) {
  98             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  99             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 100             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 101             if ($smbdchild == -1
 102                 && $nmbdchild == -1
 103                 && $winbinddchild == -1) {
 104                 last;
 105             }
 106             sleep(1);
 107             $count++;
 108         }
 109
 110         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 111             return;
 112         }
 113
 114         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 115         $self->stop_sig_kill($smbdpid);
 116         $self->stop_sig_kill($nmbdpid);
 117         $self->stop_sig_kill($winbinddpid);
 118
 119         return 0;
 120 }
 121
 122 sub getlog_env_app($$$)
 123 {
 124         my ($self, $envvars, $name) = @_;
 125
 126         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 127         my $out = $title;
 128
 129         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 130
 131         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 132         while (<LOG>) {
 133                 $out .= $_;
 134         }
 135         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 136         close(LOG);
 137
 138         return "" if $out eq $title;
 139
 140         return $out;
 141 }
 142
 143 sub getlog_env($$)
 144 {
 145         my ($self, $envvars) = @_;
 146         my $ret = "";
 147
 148         $ret .= $self->getlog_env_app($envvars, "SMBD");
 149         $ret .= $self->getlog_env_app($envvars, "NMBD");
 150         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 151
 152         return $ret;
 153 }
 154
 155 sub check_env($$)
 156 {
 157         my ($self, $envvars) = @_;
 158
 159         my $childpid = waitpid(-1, WNOHANG);
 160
 161         # TODO ...
 162         return 1;
 163 }
 164
 165 sub setup_env($$$)
 166 {
 167         my ($self, $envname, $path) = @_;
 168
 169         $ENV{ENVNAME} = $envname;
 170
 171         if (defined($self->{vars}->{$envname})) {
 172                 return $self->{vars}->{$envname};
 173         }
 174
 175         #
 176         # Avoid hitting system krb5.conf -
 177         # An env that needs Kerberos will reset this to the real
 178         # value.
 179         #
 180         $ENV{KRB5_CONFIG} = "$path/no_krb5.conf";
 181
 182         if ($envname eq "nt4_dc") {
 183                 return $self->setup_nt4_dc("$path/nt4_dc");
 184         } elsif ($envname eq "nt4_dc_schannel") {
 185                 return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
 186         } elsif ($envname eq "simpleserver") {
 187                 return $self->setup_simpleserver("$path/simpleserver");
 188         } elsif ($envname eq "fileserver") {
 189                 return $self->setup_fileserver("$path/fileserver");
 190         } elsif ($envname eq "maptoguest") {
 191                 return $self->setup_maptoguest("$path/maptoguest");
 192         } elsif ($envname eq "ktest") {
 193                 return $self->setup_ktest("$path/ktest");
 194         } elsif ($envname eq "nt4_member") {
 195                 if (not defined($self->{vars}->{nt4_dc})) {
 196                         if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
 197                                 return undef;
 198                         }
 199                 }
 200                 return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
 201         } else {
 202                 return "UNKNOWN";
 203         }
 204 }
 205
 206 sub setup_nt4_dc($$)
 207 {
 208         my ($self, $path) = @_;
 209
 210         print "PROVISIONING NT4 DC...";
 211
 212         my $nt4_dc_options = "
 213         domain master = yes
 214         domain logons = yes
 215         lanman auth = yes
 216
 217         rpc_server:epmapper = external
 218         rpc_server:spoolss = external
 219         rpc_server:lsarpc = external
 220         rpc_server:samr = external
 221         rpc_server:netlogon = external
 222         rpc_server:register_embedded_np = yes
 223         rpc_server:FssagentRpc = external
 224
 225         rpc_daemon:epmd = fork
 226         rpc_daemon:spoolssd = fork
 227         rpc_daemon:lsasd = fork
 228         rpc_daemon:fssd = fork
 229         fss: sequence timeout = 1
 230 ";
 231
 232         my $vars = $self->provision($path,
 233                                     "LOCALNT4DC2",
 234                                     "localntdc2pass",
 235                                     $nt4_dc_options);
 236
 237         $vars or return undef;
 238
 239         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 240                return undef;
 241         }
 242
 243         $vars->{DC_SERVER} = $vars->{SERVER};
 244         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 245         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 246         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 247         $vars->{DC_USERNAME} = $vars->{USERNAME};
 248         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 249
 250         $self->{vars}->{nt4_dc} = $vars;
 251
 252         return $vars;
 253 }
 254
 255 sub setup_nt4_dc_schannel($$)
 256 {
 257         my ($self, $path) = @_;
 258
 259         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 260
 261         my $pdc_options = "
 262         domain master = yes
 263         domain logons = yes
 264         lanman auth = yes
 265
 266         rpc_server:epmapper = external
 267         rpc_server:spoolss = external
 268         rpc_server:lsarpc = external
 269         rpc_server:samr = external
 270         rpc_server:netlogon = external
 271         rpc_server:register_embedded_np = yes
 272
 273         rpc_daemon:epmd = fork
 274         rpc_daemon:spoolssd = fork
 275         rpc_daemon:lsasd = fork
 276
 277         server schannel = yes
 278 ";
 279
 280         my $vars = $self->provision($path,
 281                                     "LOCALNT4DC9",
 282                                     "localntdc9pass",
 283                                     $pdc_options);
 284
 285         $vars or return undef;
 286
 287         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 288                return undef;
 289         }
 290
 291         $vars->{DC_SERVER} = $vars->{SERVER};
 292         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 293         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 294         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 295         $vars->{DC_USERNAME} = $vars->{USERNAME};
 296         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 297
 298         $self->{vars}->{nt4_dc_schannel} = $vars;
 299
 300         return $vars;
 301 }
 302
 303 sub setup_nt4_member($$$)
 304 {
 305         my ($self, $prefix, $nt4_dc_vars) = @_;
 306         my $count = 0;
 307         my $rc;
 308
 309         print "PROVISIONING MEMBER...";
 310
 311         my $member_options = "
 312         security = domain
 313         server signing = on
 314         dbwrap_tdb_mutexes:* = yes
 315 ";
 316         my $ret = $self->provision($prefix,
 317                                    "LOCALNT4MEMBER3",
 318                                    "localnt4member3pass",
 319                                    $member_options);
 320
 321         $ret or return undef;
 322
 323         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 324         do {
 325                 print "Waiting for the LOGON SERVER registration ...\n";
 326                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 327                 if ($rc != 0) {
 328                         sleep(1);
 329                 }
 330                 $count++;
 331         } while ($rc != 0 && $count < 10);
 332         if ($count == 10) {
 333                 print "NMBD not reachable after 10 retries\n";
 334                 teardown_env($self, $ret);
 335                 return 0;
 336         }
 337
 338         my $net = Samba::bindir_path($self, "net");
 339         my $cmd = "";
 340         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 341         $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 342         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 343
 344         if (system($cmd) != 0) {
 345             warn("Join failed\n$cmd");
 346             return undef;
 347         }
 348
 349         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 350                return undef;
 351         }
 352
 353         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 354         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 355         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 356         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 357         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 358         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 359
 360         return $ret;
 361 }
 362
 363 sub setup_admember($$$$)
 364 {
 365         my ($self, $prefix, $dcvars) = @_;
 366
 367         # If we didn't build with ADS, pretend this env was never available
 368         if (not $self->have_ads()) {
 369                 return "UNKNOWN";
 370         }
 371
 372         print "PROVISIONING S3 AD MEMBER...";
 373
 374         my $member_options = "
 375         security = ads
 376         server signing = on
 377         workgroup = $dcvars->{DOMAIN}
 378         realm = $dcvars->{REALM}
 379 ";
 380
 381         my $ret = $self->provision($prefix,
 382                                    "LOCALADMEMBER",
 383                                    "loCalMemberPass",
 384                                    $member_options,
 385                                    $dcvars->{SERVER_IP},
 386                                    $dcvars->{SERVER_IPV6});
 387
 388         $ret or return undef;
 389
 390         close(USERMAP);
 391         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 392         $ret->{REALM} = $dcvars->{REALM};
 393
 394         my $ctx;
 395         my $prefix_abs = abs_path($prefix);
 396         $ctx = {};
 397         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 398         $ctx->{domain} = $dcvars->{DOMAIN};
 399         $ctx->{realm} = $dcvars->{REALM};
 400         $ctx->{dnsname} = lc($dcvars->{REALM});
 401         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 402         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 403         Samba::mk_krb5_conf($ctx, "");
 404
 405         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 406
 407         my $net = Samba::bindir_path($self, "net");
 408         my $cmd = "";
 409         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 410         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 411                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 412         } else {
 413                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 414         }
 415         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 416         $cmd .= "$net join $ret->{CONFIGURATION}";
 417         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 418
 419         if (system($cmd) != 0) {
 420             warn("Join failed\n$cmd");
 421             return undef;
 422         }
 423
 424         # We need world access to this share, as otherwise the domain
 425         # administrator from the AD domain provided by Samba4 can't
 426         # access the share for tests.
 427         chmod 0777, "$prefix/share";
 428
 429         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 430                 return undef;
 431         }
 432
 433         $ret->{DC_SERVER} = $dcvars->{SERVER};
 434         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 435         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 436         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 437         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 438         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 439
 440         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 441         $ret->{target} = $self;
 442
 443         return $ret;
 444 }
 445
 446 sub setup_admember_rfc2307($$$$)
 447 {
 448         my ($self, $prefix, $dcvars) = @_;
 449
 450         # If we didn't build with ADS, pretend this env was never available
 451         if (not $self->have_ads()) {
 452                 return "UNKNOWN";
 453         }
 454
 455         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 456
 457         my $member_options = "
 458         security = ads
 459         server signing = on
 460         workgroup = $dcvars->{DOMAIN}
 461         realm = $dcvars->{REALM}
 462         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 463         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 464         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 465         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 466         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 467 ";
 468
 469         my $ret = $self->provision($prefix,
 470                                    "RFC2307MEMBER",
 471                                    "loCalMemberPass",
 472                                    $member_options,
 473                                    $dcvars->{SERVER_IP},
 474                                    $dcvars->{SERVER_IPV6});
 475
 476         $ret or return undef;
 477
 478         close(USERMAP);
 479         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 480         $ret->{REALM} = $dcvars->{REALM};
 481
 482         my $ctx;
 483         my $prefix_abs = abs_path($prefix);
 484         $ctx = {};
 485         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 486         $ctx->{domain} = $dcvars->{DOMAIN};
 487         $ctx->{realm} = $dcvars->{REALM};
 488         $ctx->{dnsname} = lc($dcvars->{REALM});
 489         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 490         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 491         Samba::mk_krb5_conf($ctx, "");
 492
 493         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 494
 495         my $net = Samba::bindir_path($self, "net");
 496         my $cmd = "";
 497         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 498         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 499                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 500         } else {
 501                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 502         }
 503         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 504         $cmd .= "$net join $ret->{CONFIGURATION}";
 505         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 506
 507         if (system($cmd) != 0) {
 508             warn("Join failed\n$cmd");
 509             return undef;
 510         }
 511
 512         # We need world access to this share, as otherwise the domain
 513         # administrator from the AD domain provided by Samba4 can't
 514         # access the share for tests.
 515         chmod 0777, "$prefix/share";
 516
 517         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 518                 return undef;
 519         }
 520
 521         $ret->{DC_SERVER} = $dcvars->{SERVER};
 522         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 523         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 524         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 525         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 526         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 527
 528         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 529         $ret->{target} = $self;
 530
 531         return $ret;
 532 }
 533
 534 sub setup_simpleserver($$)
 535 {
 536         my ($self, $path) = @_;
 537
 538         print "PROVISIONING simple server...";
 539
 540         my $prefix_abs = abs_path($path);
 541
 542         my $simpleserver_options = "
 543         lanman auth = yes
 544         vfs objects = xattr_tdb streams_depot
 545         change notify = no
 546
 547 [vfs_aio_fork]
 548         path = $prefix_abs/share
 549         vfs objects = aio_fork
 550         read only = no
 551         vfs_aio_fork:erratic_testing_mode=yes
 552 ";
 553
 554         my $vars = $self->provision($path,
 555                                     "LOCALSHARE4",
 556                                     "local4pass",
 557                                     $simpleserver_options);
 558
 559         $vars or return undef;
 560
 561         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 562                return undef;
 563         }
 564
 565         $self->{vars}->{simpleserver} = $vars;
 566
 567         return $vars;
 568 }
 569
 570 sub setup_fileserver($$)
 571 {
 572         my ($self, $path) = @_;
 573         my $prefix_abs = abs_path($path);
 574         my $srcdir_abs = abs_path($self->{srcdir});
 575
 576         print "PROVISIONING file server ...\n";
 577
 578         my @dirs = ();
 579
 580         mkdir($prefix_abs, 0777);
 581
 582         my $share_dir="$prefix_abs/share";
 583
 584         # Create share directory structure
 585         my $lower_case_share_dir="$share_dir/lower-case";
 586         push(@dirs, $lower_case_share_dir);
 587
 588         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 589         push(@dirs, $lower_case_share_dir_30000);
 590
 591         my $dfree_share_dir="$share_dir/dfree";
 592         push(@dirs, $dfree_share_dir);
 593         push(@dirs, "$dfree_share_dir/subdir1");
 594         push(@dirs, "$dfree_share_dir/subdir2");
 595
 596         my $valid_users_sharedir="$share_dir/valid_users";
 597         push(@dirs,$valid_users_sharedir);
 598
 599         my $offline_sharedir="$share_dir/offline";
 600         push(@dirs,$offline_sharedir);
 601
 602         my $fileserver_options = "
 603 [lowercase]
 604         path = $lower_case_share_dir
 605         comment = smb username is [%U]
 606         case sensitive = True
 607         default case = lower
 608         preserve case = no
 609         short preserve case = no
 610 [lowercase-30000]
 611         path = $lower_case_share_dir_30000
 612         comment = smb username is [%U]
 613         case sensitive = True
 614         default case = lower
 615         preserve case = no
 616         short preserve case = no
 617 [dfree]
 618         path = $dfree_share_dir
 619         comment = smb username is [%U]
 620         dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
 621 [valid-users-access]
 622         path = $valid_users_sharedir
 623         valid users = +userdup
 624 [offline]
 625         path = $offline_sharedir
 626         vfs objects = offline
 627         ";
 628
 629         my $vars = $self->provision($path,
 630                                     "FILESERVER",
 631                                     "fileserver",
 632                                     $fileserver_options,
 633                                     undef,
 634                                     undef,
 635                                     1);
 636
 637         $vars or return undef;
 638
 639         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 640                return undef;
 641         }
 642
 643         $self->{vars}->{fileserver} = $vars;
 644
 645         mkdir($_, 0777) foreach(@dirs);
 646
 647         ## Create case sensitive lower case share dir
 648         foreach my $file ('a'..'z') {
 649                 my $full_path = $lower_case_share_dir . '/' . $file;
 650                 open my $fh, '>', $full_path;
 651                 # Add some content to file
 652                 print $fh $full_path;
 653                 close $fh;
 654         }
 655
 656         for (my $file = 1; $file < 51; ++$file) {
 657                 my $full_path = $lower_case_share_dir . '/' . $file;
 658                 open my $fh, '>', $full_path;
 659                 # Add some content to file
 660                 print $fh $full_path;
 661                 close $fh;
 662         }
 663
 664         # Create content for 30000 share
 665         foreach my $file ('a'..'z') {
 666                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 667                 open my $fh, '>', $full_path;
 668                 # Add some content to file
 669                 print $fh $full_path;
 670                 close $fh;
 671         }
 672
 673         for (my $file = 1; $file < 30001; ++$file) {
 674                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 675                 open my $fh, '>', $full_path;
 676                 # Add some content to file
 677                 print $fh $full_path;
 678                 close $fh;
 679         }
 680
 681         ##
 682         ## create a listable file in valid_users_share
 683         ##
 684         my $valid_users_target = "$valid_users_sharedir/foo";
 685         unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
 686                 warn("Unable to open $valid_users_target");
 687                 return undef;
 688         }
 689         close(VALID_USERS_TARGET);
 690         chmod 0644, $valid_users_target;
 691
 692         return $vars;
 693 }
 694
 695 sub setup_ktest($$$)
 696 {
 697         my ($self, $prefix) = @_;
 698
 699         # If we didn't build with ADS, pretend this env was never available
 700         if (not $self->have_ads()) {
 701                 return "UNKNOWN";
 702         }
 703
 704         print "PROVISIONING server with security=ads...";
 705
 706         my $ktest_options = "
 707         workgroup = KTEST
 708         realm = ktest.samba.example.com
 709         security = ads
 710         username map = $prefix/lib/username.map
 711         server signing = required
 712 ";
 713
 714         my $ret = $self->provision($prefix,
 715                                    "LOCALKTEST6",
 716                                    "localktest6pass",
 717                                    $ktest_options);
 718
 719         $ret or return undef;
 720
 721         my $ctx;
 722         my $prefix_abs = abs_path($prefix);
 723         $ctx = {};
 724         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 725         $ctx->{domain} = "KTEST";
 726         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 727         $ctx->{dnsname} = lc($ctx->{realm});
 728         $ctx->{kdc_ipv4} = "0.0.0.0";
 729         $ctx->{kdc_ipv6} = "::";
 730         Samba::mk_krb5_conf($ctx, "");
 731
 732         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 733
 734         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 735         print USERMAP "
 736 $ret->{USERNAME} = KTEST\\Administrator
 737 ";
 738         close(USERMAP);
 739
 740 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 741 #Samba4 DC with the same parameters as are being used here.  The
 742 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 743
 744         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 745         chmod 0600, "$prefix/private/secrets.tdb";
 746
 747 #Make sure there's no old ntdb file.
 748         system("rm -f $prefix/private/secrets.ntdb");
 749
 750 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 751 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 752 #
 753 #and having in krb5.conf:
 754 # ticket_lifetime = 799718400
 755 # renew_lifetime = 799718400
 756 #
 757 # The commands for the -2 keytab where were:
 758 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 759 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 760 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 761 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 762 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 763 #
 764 # and then for the -3 keytab, I did
 765 #
 766 # net changetrustpw; kdestroy and the same again.
 767 #
 768 # This creates a credential cache with a very long lifetime (2036 at
 769 # at 2011-04), and shows that running 'net changetrustpw' does not
 770 # break existing logins (for the secrets.tdb method at least).
 771 #
 772
 773         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 774
 775         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 776         chmod 0600, "$prefix/krb5_ccache-2";
 777
 778         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 779         chmod 0600, "$prefix/krb5_ccache-3";
 780
 781         # We need world access to this share, as otherwise the domain
 782         # administrator from the AD domain provided by ktest can't
 783         # access the share for tests.
 784         chmod 0777, "$prefix/share";
 785
 786         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 787                return undef;
 788         }
 789         return $ret;
 790 }
 791
 792 sub setup_maptoguest($$)
 793 {
 794         my ($self, $path) = @_;
 795
 796         print "PROVISIONING maptoguest...";
 797
 798         my $options = "
 799 map to guest = bad user
 800 ";
 801
 802         my $vars = $self->provision($path,
 803                                     "maptoguest",
 804                                     "maptoguestpass",
 805                                     $options);
 806
 807         $vars or return undef;
 808
 809         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 810                return undef;
 811         }
 812
 813         $self->{vars}->{s3maptoguest} = $vars;
 814
 815         return $vars;
 816 }
 817
 818 sub stop_sig_term($$) {
 819         my ($self, $pid) = @_;
 820         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 821 }
 822
 823 sub stop_sig_kill($$) {
 824         my ($self, $pid) = @_;
 825         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 826 }
 827
 828 sub write_pid($$$)
 829 {
 830         my ($env_vars, $app, $pid) = @_;
 831
 832         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 833         print PID $pid;
 834         close(PID);
 835 }
 836
 837 sub read_pid($$)
 838 {
 839         my ($env_vars, $app) = @_;
 840
 841         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 842         my $pid = <PID>;
 843         close(PID);
 844         return $pid;
 845 }
 846
 847 sub check_or_start($$$$$) {
 848         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 849
 850         # use a pipe for stdin in the child processes. This allows
 851         # those processes to monitor the pipe for EOF to ensure they
 852         # exit when the test script exits
 853         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 854
 855         unlink($env_vars->{NMBD_TEST_LOG});
 856         print "STARTING NMBD...";
 857         my $pid = fork();
 858         if ($pid == 0) {
 859                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 860                 open STDERR, '>&STDOUT';
 861
 862                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 863
 864                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 865                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 866                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 867
 868                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 869                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 870                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 871                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 872                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 873                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 874                 $ENV{UID_WRAPPER_ROOT} = "1";
 875
 876                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
 877
 878                 if ($nmbd ne "yes") {
 879                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 880                                 my $signame = shift;
 881                                 print("Skip nmbd received signal $signame");
 882                                 exit 0;
 883                         };
 884                         sleep($self->{server_maxtime});
 885                         exit 0;
 886                 }
 887
 888                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 889                 my @optargs = ("-d0");
 890                 if (defined($ENV{NMBD_OPTIONS})) {
 891                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 892                 }
 893                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 894                 if(defined($ENV{NMBD_VALGRIND})) {
 895                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 896                 }
 897                 my @args = ("-F", "--no-process-group",
 898                             "-s", $env_vars->{SERVERCONFFILE},
 899                             "-l", $env_vars->{LOGDIR});
 900                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
 901                         push(@args, "--log-stdout");
 902                 }
 903
 904                 close($env_vars->{STDIN_PIPE});
 905                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 906
 907                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 908                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 909         }
 910         $env_vars->{NMBD_TL_PID} = $pid;
 911         write_pid($env_vars, "nmbd", $pid);
 912         print "DONE\n";
 913
 914         unlink($env_vars->{WINBINDD_TEST_LOG});
 915         print "STARTING WINBINDD...";
 916         $pid = fork();
 917         if ($pid == 0) {
 918                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 919                 open STDERR, '>&STDOUT';
 920
 921                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 922
 923                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 924                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 925                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 926
 927                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 928                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 929                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 930                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 931                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 932                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 933                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 934                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 935                 } else {
 936                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 937                 }
 938                 $ENV{UID_WRAPPER_ROOT} = "1";
 939
 940                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
 941
 942                 if ($winbindd ne "yes") {
 943                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 944                                 my $signame = shift;
 945                                 print("Skip winbindd received signal $signame");
 946                                 exit 0;
 947                         };
 948                         sleep($self->{server_maxtime});
 949                         exit 0;
 950                 }
 951
 952                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 953                 my @optargs = ("-d0");
 954                 if (defined($ENV{WINBINDD_OPTIONS})) {
 955                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 956                 }
 957                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 958                 if(defined($ENV{WINBINDD_VALGRIND})) {
 959                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 960                 }
 961                 my @args = ("-F", "--no-process-group",
 962                             "-s", $env_vars->{SERVERCONFFILE},
 963                             "-l", $env_vars->{LOGDIR});
 964                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
 965                         push(@args, "--stdout");
 966                 }
 967
 968                 close($env_vars->{STDIN_PIPE});
 969                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 970
 971                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 972                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 973         }
 974         $env_vars->{WINBINDD_TL_PID} = $pid;
 975         write_pid($env_vars, "winbindd", $pid);
 976         print "DONE\n";
 977
 978         unlink($env_vars->{SMBD_TEST_LOG});
 979         print "STARTING SMBD...";
 980         $pid = fork();
 981         if ($pid == 0) {
 982                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
 983                 open STDERR, '>&STDOUT';
 984
 985                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 986
 987                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 988                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 989                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 990
 991                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 992                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 993                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 994                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 995                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 996                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 997                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 998                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 999                 } else {
1000                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1001                 }
1002                 $ENV{UID_WRAPPER_ROOT} = "1";
1003
1004                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
1005
1006                 if ($smbd ne "yes") {
1007                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1008                                 my $signame = shift;
1009                                 print("Skip smbd received signal $signame");
1010                                 exit 0;
1011                         };
1012                         sleep($self->{server_maxtime});
1013                         exit 0;
1014                 }
1015
1016                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
1017                 my @optargs = ("-d0");
1018                 if (defined($ENV{SMBD_OPTIONS})) {
1019                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
1020                 }
1021                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1022                 if(defined($ENV{SMBD_VALGRIND})) {
1023                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
1024                 }
1025                 my @args = ("-F", "--no-process-group",
1026                             "-s", $env_vars->{SERVERCONFFILE},
1027                             "-l", $env_vars->{LOGDIR});
1028                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
1029                         push(@args, "--log-stdout");
1030                 }
1031
1032                 close($env_vars->{STDIN_PIPE});
1033                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1034
1035                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1036                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1037         }
1038         $env_vars->{SMBD_TL_PID} = $pid;
1039         write_pid($env_vars, "smbd", $pid);
1040         print "DONE\n";
1041
1042         close(STDIN_READER);
1043
1044         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1045 }
1046
1047 sub provision($$$$$$$$)
1048 {
1049         my ($self, $prefix, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1050
1051         ##
1052         ## setup the various environment variables we need
1053         ##
1054
1055         my $swiface = Samba::get_interface($server);
1056         my %ret = ();
1057         my $server_ip = "127.0.0.$swiface";
1058         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1059         my $domain = "SAMBA-TEST";
1060
1061         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1062         chomp $unix_name;
1063         my $unix_uid = $>;
1064         my $unix_gids_str = $);
1065         my @unix_gids = split(" ", $unix_gids_str);
1066
1067         my $prefix_abs = abs_path($prefix);
1068         my $bindir_abs = abs_path($self->{bindir});
1069
1070         my @dirs = ();
1071
1072         my $shrdir="$prefix_abs/share";
1073         push(@dirs,$shrdir);
1074
1075         my $libdir="$prefix_abs/lib";
1076         push(@dirs,$libdir);
1077
1078         my $piddir="$prefix_abs/pid";
1079         push(@dirs,$piddir);
1080
1081         my $privatedir="$prefix_abs/private";
1082         push(@dirs,$privatedir);
1083
1084         my $lockdir="$prefix_abs/lockdir";
1085         push(@dirs,$lockdir);
1086
1087         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1088         push(@dirs,$eventlogdir);
1089
1090         my $logdir="$prefix_abs/logs";
1091         push(@dirs,$logdir);
1092
1093         my $driver32dir="$shrdir/W32X86";
1094         push(@dirs,$driver32dir);
1095
1096         my $driver64dir="$shrdir/x64";
1097         push(@dirs,$driver64dir);
1098
1099         my $driver40dir="$shrdir/WIN40";
1100         push(@dirs,$driver40dir);
1101
1102         my $ro_shrdir="$shrdir/root-tmp";
1103         push(@dirs,$ro_shrdir);
1104
1105         my $msdfs_shrdir="$shrdir/msdfsshare";
1106         push(@dirs,$msdfs_shrdir);
1107
1108         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1109         push(@dirs,$msdfs_deeppath);
1110
1111         my $badnames_shrdir="$shrdir/badnames";
1112         push(@dirs,$badnames_shrdir);
1113
1114         my $lease1_shrdir="$shrdir/SMB2_10";
1115         push(@dirs,$lease1_shrdir);
1116
1117         my $lease2_shrdir="$shrdir/SMB3_00";
1118         push(@dirs,$lease2_shrdir);
1119
1120         my $manglenames_shrdir="$shrdir/manglenames";
1121         push(@dirs,$manglenames_shrdir);
1122
1123         my $widelinks_shrdir="$shrdir/widelinks";
1124         push(@dirs,$widelinks_shrdir);
1125
1126         my $widelinks_linkdir="$shrdir/widelinks_foo";
1127         push(@dirs,$widelinks_linkdir);
1128
1129         my $shadow_tstdir="$shrdir/shadow";
1130         push(@dirs,$shadow_tstdir);
1131         my $shadow_mntdir="$shadow_tstdir/mount";
1132         push(@dirs,$shadow_mntdir);
1133         my $shadow_basedir="$shadow_mntdir/base";
1134         push(@dirs,$shadow_basedir);
1135         my $shadow_shrdir="$shadow_basedir/share";
1136         push(@dirs,$shadow_shrdir);
1137
1138         # this gets autocreated by winbindd
1139         my $wbsockdir="$prefix_abs/winbindd";
1140         my $wbsockprivdir="$lockdir/winbindd_privileged";
1141
1142         my $nmbdsockdir="$prefix_abs/nmbd";
1143         unlink($nmbdsockdir);
1144
1145         ##
1146         ## create the test directory layout
1147         ##
1148         die ("prefix_abs = ''") if $prefix_abs eq "";
1149         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1150
1151         mkdir($prefix_abs, 0777);
1152         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1153         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1154             system("rm -rf $prefix_abs/*");
1155         }
1156         mkdir($_, 0777) foreach(@dirs);
1157
1158         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1159
1160         ##
1161         ## lockdir and piddir must be 0755
1162         ##
1163         chmod 0755, $lockdir;
1164         chmod 0755, $piddir;
1165
1166
1167         ##
1168         ## create ro and msdfs share layout
1169         ##
1170
1171         chmod 0755, $ro_shrdir;
1172         my $unreadable_file = "$ro_shrdir/unreadable_file";
1173         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1174                 warn("Unable to open $unreadable_file");
1175                 return undef;
1176         }
1177         close(UNREADABLE_FILE);
1178         chmod 0600, $unreadable_file;
1179
1180         my $msdfs_target = "$ro_shrdir/msdfs-target";
1181         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1182                 warn("Unable to open $msdfs_target");
1183                 return undef;
1184         }
1185         close(MSDFS_TARGET);
1186         chmod 0666, $msdfs_target;
1187         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1188                 "$msdfs_shrdir/msdfs-src1";
1189         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1190
1191         ##
1192         ## create bad names in $badnames_shrdir
1193         ##
1194         ## (An invalid name, would be mangled to 8.3).
1195         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1196         unless (open(BADNAME_TARGET, ">$badname_target")) {
1197                 warn("Unable to open $badname_target");
1198                 return undef;
1199         }
1200         close(BADNAME_TARGET);
1201         chmod 0666, $badname_target;
1202
1203         ## (A bad name, would not be mangled to 8.3).
1204         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1205         unless (open(BADNAME_TARGET, ">$badname_target")) {
1206                 warn("Unable to open $badname_target");
1207                 return undef;
1208         }
1209         close(BADNAME_TARGET);
1210         chmod 0666, $badname_target;
1211
1212         ## (A bad good name).
1213         my $badname_target = "$badnames_shrdir/blank.txt";
1214         unless (open(BADNAME_TARGET, ">$badname_target")) {
1215                 warn("Unable to open $badname_target");
1216                 return undef;
1217         }
1218         close(BADNAME_TARGET);
1219         chmod 0666, $badname_target;
1220
1221         ##
1222         ## create mangleable directory names in $manglenames_shrdir
1223         ##
1224         my $manglename_target = "$manglenames_shrdir/foo:bar";
1225         mkdir($manglename_target, 0777);
1226
1227         ##
1228         ## create symlinks for widelinks tests.
1229         ##
1230         my $widelinks_target = "$widelinks_linkdir/target";
1231         unless (open(WIDELINKS_TARGET, ">$widelinks_target")) {
1232                 warn("Unable to open $widelinks_target");
1233                 return undef;
1234         }
1235         close(WIDELINKS_TARGET);
1236         chmod 0666, $widelinks_target;
1237         ##
1238         ## This link should get ACCESS_DENIED
1239         ##
1240         symlink "$widelinks_target", "$widelinks_shrdir/source";
1241         ##
1242         ## This link should be allowed
1243         ##
1244         symlink "$widelinks_shrdir", "$widelinks_shrdir/dot";
1245
1246         my $conffile="$libdir/server.conf";
1247
1248         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
1249         my $nss_wrapper_passwd = "$privatedir/passwd";
1250         my $nss_wrapper_group = "$privatedir/group";
1251         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1252         my $resolv_conf = "$privatedir/resolv.conf";
1253         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1254
1255         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1256
1257         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1258
1259         my @eventlog_list = ("dns server", "application");
1260
1261         ##
1262         ## calculate uids and gids
1263         ##
1264
1265         my ($max_uid, $max_gid);
1266         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
1267         my ($uid_pdbtest_wkn);
1268         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1269         my ($gid_userdup, $gid_everyone);
1270
1271         if ($unix_uid < 0xffff - 5) {
1272                 $max_uid = 0xffff;
1273         } else {
1274                 $max_uid = $unix_uid;
1275         }
1276
1277         $uid_root = $max_uid - 1;
1278         $uid_nobody = $max_uid - 2;
1279         $uid_pdbtest = $max_uid - 3;
1280         $uid_pdbtest2 = $max_uid - 4;
1281         $uid_userdup = $max_uid - 5;
1282         $uid_pdbtest_wkn = $max_uid - 6;
1283
1284         if ($unix_gids[0] < 0xffff - 7) {
1285                 $max_gid = 0xffff;
1286         } else {
1287                 $max_gid = $unix_gids[0];
1288         }
1289
1290         $gid_nobody = $max_gid - 1;
1291         $gid_nogroup = $max_gid - 2;
1292         $gid_root = $max_gid - 3;
1293         $gid_domusers = $max_gid - 4;
1294         $gid_domadmins = $max_gid - 5;
1295         $gid_userdup = $max_gid - 6;
1296         $gid_everyone = $max_gid - 7;
1297
1298         ##
1299         ## create conffile
1300         ##
1301
1302         unless (open(CONF, ">$conffile")) {
1303                 warn("Unable to open $conffile");
1304                 return undef;
1305         }
1306         print CONF "
1307 [global]
1308         netbios name = $server
1309         interfaces = $server_ip/8 $server_ipv6/64
1310         bind interfaces only = yes
1311         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1312         smbd:suicide mode = yes
1313
1314         workgroup = $domain
1315
1316         private dir = $privatedir
1317         pid directory = $piddir
1318         lock directory = $lockdir
1319         log file = $logdir/log.\%m
1320         log level = 1
1321         debug pid = yes
1322         max log size = 0
1323
1324         state directory = $lockdir
1325         cache directory = $lockdir
1326
1327         passdb backend = tdbsam
1328
1329         time server = yes
1330
1331         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1332         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1333         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1334         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1335         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1336         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1337         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1338
1339         addprinter command =            $mod_printer_pl -a -s $conffile --
1340         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1341
1342         eventlog list = application \"dns server\"
1343
1344         kernel oplocks = no
1345         kernel change notify = no
1346         smb2 leases = yes
1347
1348         logging = file
1349         printing = bsd
1350         printcap name = /dev/null
1351
1352         winbindd socket directory = $wbsockdir
1353         nmbd:socket dir = $nmbdsockdir
1354         idmap config * : range = 100000-200000
1355         winbind enum users = yes
1356         winbind enum groups = yes
1357         winbind separator = /
1358
1359 #       min receivefile size = 4000
1360
1361         read only = no
1362         server signing = auto
1363
1364         smbd:sharedelay = 100000
1365         smbd:writetimeupdatedelay = 500000
1366         map hidden = no
1367         map system = no
1368         map readonly = no
1369         store dos attributes = yes
1370         create mask = 755
1371         dos filemode = yes
1372         strict rename = yes
1373         strict sync = yes
1374         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1375
1376         printing = vlp
1377         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1378         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1379         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1380         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1381         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1382         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1383         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1384         lpq cache time = 0
1385         print notify backchannel = yes
1386
1387         ncalrpc dir = $prefix_abs/ncalrpc
1388
1389         # The samba3.blackbox.smbclient_s3 test uses this to test that
1390         # sending messages works, and that the %m sub works.
1391         message command = mv %s $shrdir/message.%m
1392
1393         # fsrvp server requires registry shares
1394         registry shares = yes
1395
1396         # Used by RPC SRVSVC tests
1397         add share command = $bindir_abs/smbaddshare
1398         change share command = $bindir_abs/smbchangeshare
1399         delete share command = $bindir_abs/smbdeleteshare
1400
1401         # fruit:copyfile is a global option
1402         fruit:copyfile = yes
1403
1404         #this does not mean that we use non-secure test env,
1405         #it just means we ALLOW one to be configured.
1406         allow insecure wide links = yes
1407
1408         # Begin extra options
1409         $extra_options
1410         # End extra options
1411
1412         #Include user defined custom parameters if set
1413 ";
1414
1415         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1416                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1417         }
1418
1419         print CONF "
1420 [tmp]
1421         path = $shrdir
1422         comment = smb username is [%U]
1423 [tmpsort]
1424         path = $shrdir
1425         comment = Load dirsort module
1426         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1427 [tmpenc]
1428         path = $shrdir
1429         comment = encrypt smb username is [%U]
1430         smb encrypt = required
1431         vfs objects = dirsort
1432 [tmpguest]
1433         path = $shrdir
1434         guest ok = yes
1435 [guestonly]
1436         path = $shrdir
1437         guest only = yes
1438         guest ok = yes
1439 [forceuser]
1440         path = $shrdir
1441         force user = $unix_name
1442         guest ok = yes
1443 [forceuser_unixonly]
1444         comment = force a user with unix user SID and group SID
1445         path = $shrdir
1446         force user = pdbtest
1447         guest ok = yes
1448 [forceuser_wkngroup]
1449         comment = force a user with well-known group SID
1450         path = $shrdir
1451         force user = pdbtest_wkn
1452         guest ok = yes
1453 [forcegroup]
1454         path = $shrdir
1455         force group = nogroup
1456         guest ok = yes
1457 [ro-tmp]
1458         path = $ro_shrdir
1459         guest ok = yes
1460 [write-list-tmp]
1461         path = $shrdir
1462         read only = yes
1463         write list = $unix_name
1464 [valid-users-tmp]
1465         path = $shrdir
1466         valid users = $unix_name
1467 [msdfs-share]
1468         path = $msdfs_shrdir
1469         msdfs root = yes
1470         msdfs shuffle referrals = yes
1471         guest ok = yes
1472 [hideunread]
1473         copy = tmp
1474         hide unreadable = yes
1475 [tmpcase]
1476         copy = tmp
1477         case sensitive = yes
1478 [hideunwrite]
1479         copy = tmp
1480         hide unwriteable files = yes
1481 [durable]
1482         copy = tmp
1483         kernel share modes = no
1484         kernel oplocks = no
1485         posix locking = no
1486 [fs_specific]
1487         copy = tmp
1488         $fs_specific_conf
1489 [print1]
1490         copy = tmp
1491         printable = yes
1492
1493 [print2]
1494         copy = print1
1495 [print3]
1496         copy = print1
1497         default devmode = no
1498 [lp]
1499         copy = print1
1500
1501 [nfs4acl_simple]
1502         path = $shrdir
1503         comment = smb username is [%U]
1504         nfs4:mode = simple
1505         vfs objects = nfs4acl_xattr xattr_tdb
1506
1507 [nfs4acl_special]
1508         path = $shrdir
1509         comment = smb username is [%U]
1510         nfs4:mode = special
1511         vfs objects = nfs4acl_xattr xattr_tdb
1512
1513 [xcopy_share]
1514         path = $shrdir
1515         comment = smb username is [%U]
1516         create mask = 777
1517         force create mode = 777
1518 [posix_share]
1519         path = $shrdir
1520         comment = smb username is [%U]
1521         create mask = 0777
1522         force create mode = 0
1523         directory mask = 0777
1524         force directory mode = 0
1525         vfs objects = xattr_tdb
1526 [aio]
1527         copy = tmp
1528         aio read size = 1
1529         aio write size = 1
1530
1531 [print\$]
1532         copy = tmp
1533
1534 [vfs_fruit]
1535         path = $shrdir
1536         vfs objects = catia fruit streams_xattr acl_xattr
1537         ea support = yes
1538         fruit:ressource = file
1539         fruit:metadata = netatalk
1540         fruit:locking = netatalk
1541         fruit:encoding = native
1542
1543 [badname-tmp]
1544         path = $badnames_shrdir
1545         guest ok = yes
1546
1547 [manglenames_share]
1548         path = $manglenames_shrdir
1549         guest ok = yes
1550
1551 [dynamic_share]
1552         path = $shrdir/%R
1553         guest ok = yes
1554
1555 [widelinks_share]
1556         path = $widelinks_shrdir
1557         wide links = no
1558         guest ok = yes
1559
1560 [fsrvp_share]
1561         path = $shrdir
1562         comment = fake shapshots using rsync
1563         vfs objects = shell_snap shadow_copy2
1564         shell_snap:check path command = $fake_snap_pl --check
1565         shell_snap:create command = $fake_snap_pl --create
1566         shell_snap:delete command = $fake_snap_pl --delete
1567         # a relative path here fails, the snapshot dir is no longer found
1568         shadow:snapdir = $shrdir/.snapshots
1569
1570 [shadow1]
1571         path = $shadow_shrdir
1572         comment = previous versions snapshots under mount point
1573         vfs objects = shadow_copy2
1574         shadow:mountpoint = $shadow_mntdir
1575
1576 [shadow2]
1577         path = $shadow_shrdir
1578         comment = previous versions snapshots outside mount point
1579         vfs objects = shadow_copy2
1580         shadow:mountpoint = $shadow_mntdir
1581         shadow:snapdir = $shadow_tstdir/.snapshots
1582
1583 [shadow3]
1584         path = $shadow_shrdir
1585         comment = previous versions with subvolume snapshots, snapshots under base dir
1586         vfs objects = shadow_copy2
1587         shadow:mountpoint = $shadow_mntdir
1588         shadow:basedir = $shadow_basedir
1589         shadow:snapdir = $shadow_basedir/.snapshots
1590
1591 [shadow4]
1592         path = $shadow_shrdir
1593         comment = previous versions with subvolume snapshots, snapshots outside mount point
1594         vfs objects = shadow_copy2
1595         shadow:mountpoint = $shadow_mntdir
1596         shadow:basedir = $shadow_basedir
1597         shadow:snapdir = $shadow_tstdir/.snapshots
1598
1599 [shadow5]
1600         path = $shadow_shrdir
1601         comment = previous versions at volume root snapshots under mount point
1602         vfs objects = shadow_copy2
1603         shadow:mountpoint = $shadow_shrdir
1604
1605 [shadow6]
1606         path = $shadow_shrdir
1607         comment = previous versions at volume root snapshots outside mount point
1608         vfs objects = shadow_copy2
1609         shadow:mountpoint = $shadow_shrdir
1610         shadow:snapdir = $shadow_tstdir/.snapshots
1611
1612 [shadow7]
1613         path = $shadow_shrdir
1614         comment = previous versions snapshots everywhere
1615         vfs objects = shadow_copy2
1616         shadow:mountpoint = $shadow_mntdir
1617         shadow:snapdirseverywhere = yes
1618
1619 [shadow8]
1620         path = $shadow_shrdir
1621         comment = previous versions using snapsharepath
1622         vfs objects = shadow_copy2
1623         shadow:mountpoint = $shadow_mntdir
1624         shadow:snapdir = $shadow_tstdir/.snapshots
1625         shadow:snapsharepath = share
1626
1627 [shadow_wl]
1628         path = $shadow_shrdir
1629         comment = previous versions with wide links allowed
1630         vfs objects = shadow_copy2
1631         shadow:mountpoint = $shadow_mntdir
1632         wide links = yes
1633         ";
1634         close(CONF);
1635
1636         ##
1637         ## create a test account
1638         ##
1639
1640         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1641            warn("Unable to open $nss_wrapper_passwd");
1642            return undef;
1643         }
1644         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1645 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1646 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1647 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1648 userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
1649 pdbtest_wkn:x:$uid_pdbtest_wkn:$gid_everyone:pdbtest_wkn gecos:$prefix_abs:/bin/false
1650 ";
1651         if ($unix_uid != 0) {
1652                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
1653 ";
1654         }
1655         close(PASSWD);
1656
1657         unless (open(GROUP, ">$nss_wrapper_group")) {
1658              warn("Unable to open $nss_wrapper_group");
1659              return undef;
1660         }
1661         print GROUP "nobody:x:$gid_nobody:
1662 nogroup:x:$gid_nogroup:nobody
1663 $unix_name-group:x:$unix_gids[0]:
1664 domusers:X:$gid_domusers:
1665 domadmins:X:$gid_domadmins:
1666 userdup:x:$gid_userdup:$unix_name
1667 everyone:x:$gid_everyone:
1668 ";
1669         if ($unix_gids[0] != 0) {
1670                 print GROUP "root:x:$gid_root:
1671 ";
1672         }
1673
1674         close(GROUP);
1675
1676         ## hosts
1677         my $hostname = lc($server);
1678         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
1679                 warn("Unable to open $nss_wrapper_hosts");
1680                 return undef;
1681         }
1682         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
1683         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
1684         close(HOSTS);
1685
1686         ## hosts
1687         unless (open(RESOLV_CONF, ">$resolv_conf")) {
1688                 warn("Unable to open $resolv_conf");
1689                 return undef;
1690         }
1691         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
1692                 if (defined($dc_server_ip)) {
1693                         print RESOLV_CONF "nameserver $dc_server_ip\n";
1694                 }
1695                 if (defined($dc_server_ipv6)) {
1696                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
1697                 }
1698         } else {
1699                 print RESOLV_CONF "nameserver ${server_ip}\n";
1700                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
1701         }
1702         close(RESOLV_CONF);
1703
1704         foreach my $evlog (@eventlog_list) {
1705                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1706                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1707                 close(EVENTLOG);
1708         }
1709
1710         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1711         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1712         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1713         $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1714         if ($ENV{SAMBA_DNS_FAKING}) {
1715                 $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
1716         } else {
1717                 $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1718         }
1719
1720         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
1721         unless (open(PWD, "|$cmd")) {
1722              warn("Unable to set password for test account\n$cmd");
1723              return undef;
1724         }
1725         print PWD "$password\n$password\n";
1726         unless (close(PWD)) {
1727              warn("Unable to set password for test account\n$cmd");
1728              return undef;
1729         }
1730         print "DONE\n";
1731
1732         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1733         print DNS_UPDATE_LIST "A $server. $server_ip\n";
1734         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
1735         close(DNS_UPDATE_LIST);
1736
1737         $ret{SERVER_IP} = $server_ip;
1738         $ret{SERVER_IPV6} = $server_ipv6;
1739         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1740         $ret{NMBD_TEST_LOG_POS} = 0;
1741         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1742         $ret{WINBINDD_TEST_LOG_POS} = 0;
1743         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1744         $ret{SMBD_TEST_LOG_POS} = 0;
1745         $ret{SERVERCONFFILE} = $conffile;
1746         $ret{CONFIGURATION} ="-s $conffile";
1747         $ret{SERVER} = $server;
1748         $ret{USERNAME} = $unix_name;
1749         $ret{USERID} = $unix_uid;
1750         $ret{DOMAIN} = $domain;
1751         $ret{NETBIOSNAME} = $server;
1752         $ret{PASSWORD} = $password;
1753         $ret{PIDDIR} = $piddir;
1754         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
1755         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1756         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1757         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1758         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1759         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1760         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1761         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1762         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1763         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
1764         if ($ENV{SAMBA_DNS_FAKING}) {
1765                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1766         } else {
1767                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
1768         }
1769         $ret{LOCAL_PATH} = "$shrdir";
1770         $ret{LOGDIR} = $logdir;
1771
1772         #
1773         # Avoid hitting system krb5.conf -
1774         # An env that needs Kerberos will reset this to the real
1775         # value.
1776         #
1777         $ret{KRB5_CONFIG} = abs_path($prefix) . "/no_krb5.conf";
1778
1779         return \%ret;
1780 }
1781
1782 sub wait_for_start($$$$$)
1783 {
1784         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
1785         my $ret;
1786
1787         if ($nmbd eq "yes") {
1788                 my $count = 0;
1789
1790                 # give time for nbt server to register its names
1791                 print "checking for nmbd\n";
1792
1793                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1794                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
1795
1796                 do {
1797                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
1798                         if ($ret != 0) {
1799                                 sleep(1);
1800                         } else {
1801                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1802                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
1803                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1804                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1805                         }
1806                         $count++;
1807                 } while ($ret != 0 && $count < 10);
1808                 if ($count == 10) {
1809                         print "NMBD not reachable after 10 retries\n";
1810                         teardown_env($self, $envvars);
1811                         return 0;
1812                 }
1813         }
1814
1815         if ($winbindd eq "yes") {
1816             print "checking for winbindd\n";
1817             my $count = 0;
1818             do {
1819                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
1820                 if ($ret != 0) {
1821                     sleep(2);
1822                 }
1823                 $count++;
1824             } while ($ret != 0 && $count < 10);
1825             if ($count == 10) {
1826                 print "WINBINDD not reachable after 20 seconds\n";
1827                 teardown_env($self, $envvars);
1828                 return 0;
1829             }
1830         }
1831
1832         if ($smbd eq "yes") {
1833             # make sure smbd is also up set
1834             print "wait for smbd\n";
1835
1836             my $count = 0;
1837             do {
1838                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1839                 if ($ret != 0) {
1840                     sleep(2);
1841                 }
1842                 $count++
1843             } while ($ret != 0 && $count < 10);
1844             if ($count == 10) {
1845                 print "SMBD failed to start up in a reasonable time (20sec)\n";
1846                 teardown_env($self, $envvars);
1847                 return 0;
1848             }
1849         }
1850
1851         # Ensure we have domain users mapped.
1852         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1853         if ($ret != 0) {
1854             return 1;
1855         }
1856         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
1857         if ($ret != 0) {
1858             return 1;
1859         }
1860         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add sid=S-1-1-0 unixgroup=everyone type=builtin");
1861         if ($ret != 0) {
1862             return 1;
1863         }
1864
1865         if ($winbindd eq "yes") {
1866             # note: creating builtin groups requires winbindd for the
1867             # unix id allocator
1868             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
1869             if ($ret != 0) {
1870                 print "Failed to create BUILTIN\\Users group\n";
1871                 return 0;
1872             }
1873             my $count = 0;
1874             do {
1875                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
1876                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
1877                 if ($ret != 0) {
1878                     sleep(2);
1879                 }
1880                 $count++;
1881             } while ($ret != 0 && $count < 10);
1882             if ($count == 10) {
1883                 print "WINBINDD not reachable after 20 seconds\n";
1884                 teardown_env($self, $envvars);
1885                 return 0;
1886             }
1887         }
1888
1889         print $self->getlog_env($envvars);
1890
1891         return 1;
1892 }
1893
1894 1;