kai/samba.git
8 years agos3-libsmb: Remove use of cli_errstr()
Björn Baumbach [Thu, 7 Jul 2011 15:18:40 +0000 (17:18 +0200)]
s3-libsmb: Remove use of cli_errstr()

Signed-off-by: Stefan Metzmacher <metze@samba.org>
8 years agos3-torture: run_shortname_test: Remove uses of cli_errstr()
Björn Baumbach [Thu, 7 Jul 2011 14:56:05 +0000 (16:56 +0200)]
s3-torture: run_shortname_test: Remove uses of cli_errstr()

Signed-off-by: Stefan Metzmacher <metze@samba.org>
8 years agos3-torture: run_simple_posix_open_test: Remove uses of cli_errstr()
Björn Baumbach [Thu, 7 Jul 2011 14:49:12 +0000 (16:49 +0200)]
s3-torture: run_simple_posix_open_test: Remove uses of cli_errstr()

Signed-off-by: Stefan Metzmacher <metze@samba.org>
8 years agos3-torture: use nt_errstr() for cli_unlink() error handling
Stefan Metzmacher [Thu, 7 Jul 2011 15:56:19 +0000 (17:56 +0200)]
s3-torture: use nt_errstr() for cli_unlink() error handling

Use nt_errstr() instead of cli_errstr() for error handling on
cli_unlink() calls.

Signed-off-by: Stefan Metzmacher <metze@samba.org>
8 years agos3-torture: introduce check_both_error()
Björn Baumbach [Thu, 7 Jul 2011 14:27:39 +0000 (16:27 +0200)]
s3-torture: introduce check_both_error()

Check if the server produced the expected dos or nt error code like
check_error(), but without a cli_state struct.

Signed-off-by: Stefan Metzmacher <metze@samba.org>
8 years agos3:libsmb: finally remove unused cli_state->outbuf
Stefan Metzmacher [Thu, 7 Jul 2011 16:16:56 +0000 (18:16 +0200)]
s3:libsmb: finally remove unused cli_state->outbuf

metze

8 years agos3:libsmb: remove unused clistr_push_fn()
Stefan Metzmacher [Thu, 7 Jul 2011 15:24:32 +0000 (17:24 +0200)]
s3:libsmb: remove unused clistr_push_fn()

metze

8 years agos3:libsmb: remove unused clistr_pull_fn()
Stefan Metzmacher [Wed, 6 Jul 2011 15:57:45 +0000 (17:57 +0200)]
s3:libsmb: remove unused clistr_pull_fn()

metze

8 years agos3:torture/scanner: use trans2_bytes_push_str() in scan_nttrans()
Stefan Metzmacher [Thu, 7 Jul 2011 13:38:02 +0000 (15:38 +0200)]
s3:torture/scanner: use trans2_bytes_push_str() in scan_nttrans()

metze

8 years agos3:torture/scanner: use trans2_bytes_push_str() in scan_trans2()
Stefan Metzmacher [Thu, 7 Jul 2011 13:38:02 +0000 (15:38 +0200)]
s3:torture/scanner: use trans2_bytes_push_str() in scan_trans2()

metze

8 years agos3:libsmb: use trans2_bytes_push_str() in cli_tcon_andx_create() for the plaintext...
Stefan Metzmacher [Thu, 7 Jul 2011 08:55:00 +0000 (10:55 +0200)]
s3:libsmb: use trans2_bytes_push_str() in cli_tcon_andx_create() for the plaintext password

This makes sure we push the string always in DOS charset.

metze

8 years agos3:libsmb: use trans2_bytes_push_str() in cli_set_ea_path()
Stefan Metzmacher [Thu, 7 Jul 2011 08:16:38 +0000 (10:16 +0200)]
s3:libsmb: use trans2_bytes_push_str() in cli_set_ea_path()

metze

8 years agos3:libsmb: use trans2_bytes_push_str() in cli_dfs_get_referral()
Stefan Metzmacher [Wed, 6 Jul 2011 16:36:29 +0000 (18:36 +0200)]
s3:libsmb: use trans2_bytes_push_str() in cli_dfs_get_referral()

metze

8 years agos3:libsmb: use a talloc_stackframe in cli_dfs_get_referral()
Stefan Metzmacher [Thu, 7 Jul 2011 06:58:25 +0000 (08:58 +0200)]
s3:libsmb: use a talloc_stackframe in cli_dfs_get_referral()

metze

8 years agos3:libsmb: use trans2_bytes_push_str/bytes() in cli_list_trans_*()
Stefan Metzmacher [Wed, 6 Jul 2011 16:24:50 +0000 (18:24 +0200)]
s3:libsmb: use trans2_bytes_push_str/bytes() in cli_list_trans_*()

metze

8 years agos3:libsmb: use clistr_pull_talloc() for short_name in interpret_long_filename()
Stefan Metzmacher [Wed, 6 Jul 2011 16:57:27 +0000 (18:57 +0200)]
s3:libsmb: use clistr_pull_talloc() for short_name in interpret_long_filename()

metze

8 years agos3:libsmb: interpret_long_filename() short_name is always UNICODE
Stefan Metzmacher [Thu, 7 Jul 2011 12:46:40 +0000 (14:46 +0200)]
s3:libsmb: interpret_long_filename() short_name is always UNICODE

metze

8 years agos3:libsmb: add trans2_bytes_push_bytes()
Stefan Metzmacher [Thu, 7 Jul 2011 08:02:36 +0000 (10:02 +0200)]
s3:libsmb: add trans2_bytes_push_bytes()

metze

8 years agos3:libsmb: make trans2_bytes_push_str() non-static
Stefan Metzmacher [Wed, 6 Jul 2011 16:23:52 +0000 (18:23 +0200)]
s3:libsmb: make trans2_bytes_push_str() non-static

We should use this and get rid of clistr_push().

metze

8 years agos3:utils: avoid cli_nt_error()/cli_errstr() if we already have the status
Stefan Metzmacher [Thu, 7 Jul 2011 13:33:43 +0000 (15:33 +0200)]
s3:utils: avoid cli_nt_error()/cli_errstr() if we already have the status

metze

8 years agos3-printing: remove tdb migration invalid printer name checks
David Disseldorp [Tue, 5 Jul 2011 13:04:02 +0000 (15:04 +0200)]
s3-printing: remove tdb migration invalid printer name checks

WERR_INVALID_PRINTER_NAME only needed to be handled when printing tdb
migration used spoolss, with winreg such errors are no longer possible.

Signed-off-by: Günther Deschner <gd@samba.org>
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Thu Jul  7 19:15:34 CEST 2011 on sn-devel-104

8 years agos3-printing: make sure to first migrate the printers then the security descriptor.
Günther Deschner [Tue, 5 Jul 2011 12:01:40 +0000 (14:01 +0200)]
s3-printing: make sure to first migrate the printers then the security descriptor.

Guenther

Pair-Programmed-With: David Disseldorp <ddiss@suse.de>

8 years agos3-printing: fill info2_mask in printer migration
David Disseldorp [Tue, 5 Jul 2011 09:34:47 +0000 (11:34 +0200)]
s3-printing: fill info2_mask in printer migration

Also fix possibly uninitialised status return from
printing_tdb_migrate_printer().

8 years agos3-printing: remove spoolss pipe from migration library, only using winreg finally.
Günther Deschner [Tue, 5 Jul 2011 00:33:23 +0000 (02:33 +0200)]
s3-printing: remove spoolss pipe from migration library, only using winreg finally.

Guenther

Pair-Programmed-With: David Disseldorp <ddiss@suse.de>

8 years agos3-printing: use winreg interface for migration, instead of spoolss.
Günther Deschner [Mon, 4 Jul 2011 17:47:07 +0000 (19:47 +0200)]
s3-printing: use winreg interface for migration, instead of spoolss.

Guenther

Pair-Programmed-With: David Disseldorp <ddiss@suse.de>

8 years agos3-printing: safe a ton of roundtrips by reusing existing winreg binding_handles.
Günther Deschner [Mon, 4 Jul 2011 22:55:35 +0000 (00:55 +0200)]
s3-printing: safe a ton of roundtrips by reusing existing winreg binding_handles.

Guenther

Pair-Programmed-With: David Disseldorp <ddiss@suse.de>

8 years agos3-printing: use winreg_internal functions.
Günther Deschner [Mon, 4 Jul 2011 22:16:03 +0000 (00:16 +0200)]
s3-printing: use winreg_internal functions.

Guenther

Pair-Programmed-With: David Disseldorp <ddiss@suse.de>

8 years agos3-printing: add winreg_internal functions.
Günther Deschner [Mon, 4 Jul 2011 22:16:47 +0000 (00:16 +0200)]
s3-printing: add winreg_internal functions.

Guenther

Pair-Programmed-With: David Disseldorp <ddiss@suse.de>

8 years agos3-printing: add winreg_printer_binding_handle and remove most of srv_spoolss_util.c.
Günther Deschner [Mon, 4 Jul 2011 18:09:54 +0000 (20:09 +0200)]
s3-printing: add winreg_printer_binding_handle and remove most of srv_spoolss_util.c.

Guenther

Pair-Programmed-With: David Disseldorp <ddiss@suse.de>

8 years agos3-printing: add rpc_client/cli_winreg_spoolss.c
Günther Deschner [Mon, 4 Jul 2011 17:47:29 +0000 (19:47 +0200)]
s3-printing: add rpc_client/cli_winreg_spoolss.c

Guenther

Pair-Programmed-With: David Disseldorp <ddiss@suse.de>

8 years agos3-waf: make LIBCLI_SPOOLSS a shared library
Günther Deschner [Tue, 5 Jul 2011 09:29:37 +0000 (11:29 +0200)]
s3-waf: make LIBCLI_SPOOLSS a shared library

Guenther

Pair-Programmed-With: David Disseldorp <ddiss@suse.de>

8 years agos3-printing: move spoolss_create_default_devmode/secdesc to init_spoolss.h
Günther Deschner [Tue, 5 Jul 2011 00:15:35 +0000 (02:15 +0200)]
s3-printing: move spoolss_create_default_devmode/secdesc to init_spoolss.h

Guenther

Pair-Programmed-With: David Disseldorp <ddiss@suse.de>

8 years agos3-printing: move driver_info_ctr_to_info8 to init_spoolss.h
Günther Deschner [Tue, 5 Jul 2011 00:12:24 +0000 (02:12 +0200)]
s3-printing: move driver_info_ctr_to_info8 to init_spoolss.h

Guenther

Pair-Programmed-With: David Disseldorp <ddiss@suse.de>

8 years agos3-printing: move os2 related functions to printing/nt_printing_os2.c.
Günther Deschner [Mon, 4 Jul 2011 23:24:48 +0000 (01:24 +0200)]
s3-printing: move os2 related functions to printing/nt_printing_os2.c.

Guenther

Pair-Programmed-With: David Disseldorp <ddiss@suse.de>

8 years agos3: Remove a use of cli_errstr
Volker Lendecke [Thu, 7 Jul 2011 13:42:33 +0000 (15:42 +0200)]
s3: Remove a use of cli_errstr

Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Thu Jul  7 18:04:26 CEST 2011 on sn-devel-104

8 years agos3-waf: Fix linking bugs causing segfaults.
Andreas Schneider [Thu, 7 Jul 2011 12:59:51 +0000 (14:59 +0200)]
s3-waf: Fix linking bugs causing segfaults.

As auth_util.c is linked several times the static variables have
different address on different calls. This leads to segfaults.

Autobuild-User: Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date: Thu Jul  7 16:50:05 CEST 2011 on sn-devel-104

8 years agos3:testparm: avoid spurious warnings about dos mode mapping and create mask if store...
Gregor Beck [Wed, 6 Jul 2011 13:10:27 +0000 (15:10 +0200)]
s3:testparm: avoid spurious warnings about dos mode mapping and create mask if store dos attributes is set

Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Thu Jul  7 12:49:01 CEST 2011 on sn-devel-104

8 years agos4 provision: Add some of the AD-specific DNS records to the directory
Kai Blin [Mon, 27 Jun 2011 09:25:39 +0000 (11:25 +0200)]
s4 provision: Add some of the AD-specific DNS records to the directory

Signed-off-by: Kai Blin <kai@samba.org>
Autobuild-User: Kai Blin <kai@samba.org>
Autobuild-Date: Thu Jul  7 02:29:53 CEST 2011 on sn-devel-104

8 years agos4 provision: split up DNS provisioning into generic and samba-specific ldifs
Kai Blin [Sat, 25 Jun 2011 22:36:25 +0000 (00:36 +0200)]
s4 provision: split up DNS provisioning into generic and samba-specific ldifs

Signed-off-by: Kai Blin <kai@samba.org>
8 years agos4:torture/smb2: s/smb2cli_unlock/test_smb2_unlock
Stefan Metzmacher [Wed, 6 Jul 2011 15:52:33 +0000 (17:52 +0200)]
s4:torture/smb2: s/smb2cli_unlock/test_smb2_unlock

metze

Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Wed Jul  6 19:07:42 CEST 2011 on sn-devel-104

8 years agos4:torture/smb2: s/smb2cli_lock/test_smb2_lock
Stefan Metzmacher [Wed, 6 Jul 2011 15:52:33 +0000 (17:52 +0200)]
s4:torture/smb2: s/smb2cli_lock/test_smb2_lock

metze

8 years agos3:libsmb: use clistr_pull_talloc() in cli_qfilename()
Stefan Metzmacher [Wed, 6 Jul 2011 12:35:13 +0000 (14:35 +0200)]
s3:libsmb: use clistr_pull_talloc() in cli_qfilename()

metze

8 years agos3:libsmb: let cli_qfileinfo[_recv]() return recv_flags2
Stefan Metzmacher [Wed, 6 Jul 2011 12:04:15 +0000 (14:04 +0200)]
s3:libsmb: let cli_qfileinfo[_recv]() return recv_flags2

metze

8 years agos3:libsmb: use clistr_pull_talloc() in cli_get_fs_volume_info()
Stefan Metzmacher [Wed, 6 Jul 2011 11:57:20 +0000 (13:57 +0200)]
s3:libsmb: use clistr_pull_talloc() in cli_get_fs_volume_info()

metze

8 years agos3:libsmb: the SMB_QUERY_FS_VOLUME_INFO response needs at least 18 data bytes
Stefan Metzmacher [Wed, 6 Jul 2011 11:21:41 +0000 (13:21 +0200)]
s3:libsmb: the SMB_QUERY_FS_VOLUME_INFO response needs at least 18 data bytes

metze

8 years agos3:libsmb: don't use cli->inbuf in cli_dfs_get_referral()
Stefan Metzmacher [Wed, 6 Jul 2011 11:04:26 +0000 (13:04 +0200)]
s3:libsmb: don't use cli->inbuf in cli_dfs_get_referral()

The rdata buffer returned by cli_trans() doesn't belong to
cli->inbuf, so don't use it.

metze

8 years agos3:libsmb: fix error handling in cli_dfs_get_referral()
Stefan Metzmacher [Wed, 6 Jul 2011 13:57:22 +0000 (15:57 +0200)]
s3:libsmb: fix error handling in cli_dfs_get_referral()

We should not return NT_STATUS_OK on error.

metze

8 years agos3:sharesec: return an error if get_share_security() returns NULL
Stefan Metzmacher [Wed, 6 Jul 2011 10:31:41 +0000 (12:31 +0200)]
s3:sharesec: return an error if get_share_security() returns NULL

This indicates an error, as it uses get_share_security_default()
if no security descriptor is configured.

Jeremy, please check.

metze

Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Wed Jul  6 15:40:23 CEST 2011 on sn-devel-104

8 years agos3:test: catch more errors in test_access_check() in the smbclient_s3 test
Michael Adam [Wed, 6 Jul 2011 10:24:13 +0000 (12:24 +0200)]
s3:test: catch more errors in test_access_check() in the smbclient_s3 test

Autobuild-User: Michael Adam <obnox@samba.org>
Autobuild-Date: Wed Jul  6 14:07:13 CEST 2011 on sn-devel-104

8 years agos3:registry: update copyright for the registry db implementation
Michael Adam [Wed, 6 Jul 2011 10:09:52 +0000 (12:09 +0200)]
s3:registry: update copyright for the registry db implementation

8 years agoexamples/VFS: try to fix the build on openbsd, adding alternative spellings of autoco...
Michael Adam [Wed, 6 Jul 2011 08:37:40 +0000 (10:37 +0200)]
examples/VFS: try to fix the build on openbsd, adding alternative spellings of autoconf/header

The host "samba-amd64" on the build farm running openbsd 4.8 broke.
Taking over the additional spellings of autoconf and autoheader from
the source3/autogen.sh script should fix it.

8 years agos3:sharesec: also initialize pgranted if get_share_security() returns NULL
Stefan Metzmacher [Tue, 5 Jul 2011 14:59:41 +0000 (16:59 +0200)]
s3:sharesec: also initialize pgranted if get_share_security() returns NULL

metze

Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Wed Jul  6 12:54:30 CEST 2011 on sn-devel-104

8 years agos3: Follow the TALLOC_FREE convention in source3
Volker Lendecke [Wed, 6 Jul 2011 07:39:08 +0000 (09:39 +0200)]
s3: Follow the TALLOC_FREE convention in source3

Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Wed Jul  6 11:01:05 CEST 2011 on sn-devel-104

8 years agos3: Fix Coverity ID 2586 -- NO_EFFECT
Volker Lendecke [Wed, 6 Jul 2011 07:37:04 +0000 (09:37 +0200)]
s3: Fix Coverity ID 2586 -- NO_EFFECT

tsocket_address_bsd_sockaddr returns ssize_t, and on some systems socklen_t is
unsigned. So (len < 0) could never have turned true.

Volker

8 years agos3: Remove cli_errstr from cmd_posix_open
Volker Lendecke [Tue, 5 Jul 2011 17:55:25 +0000 (19:55 +0200)]
s3: Remove cli_errstr from cmd_posix_open

Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Wed Jul  6 09:45:11 CEST 2011 on sn-devel-104

8 years agos3: Fix error logic in posix_open
Volker Lendecke [Tue, 5 Jul 2011 17:51:09 +0000 (19:51 +0200)]
s3: Fix error logic in posix_open

8 years agos3: Remove a few uses of cli_errstr
Volker Lendecke [Tue, 5 Jul 2011 17:42:46 +0000 (19:42 +0200)]
s3: Remove a few uses of cli_errstr

8 years agos3: make cli_resolve_path return NTSTATUS
Volker Lendecke [Sun, 3 Jul 2011 18:53:55 +0000 (20:53 +0200)]
s3: make cli_resolve_path return NTSTATUS

This looks larger than it is. No parameters needed changing.

8 years agoccan/tally: don't use SIZE_MAX.
Rusty Russell [Wed, 6 Jul 2011 05:17:44 +0000 (14:47 +0930)]
ccan/tally: don't use SIZE_MAX.

Michael Adam points out this broke the build farm (ie. OSF1 axp V5.1 2650 alpha)
so fixed in CCAN and imported from af7a902d74a7926693f55da9e21a67dde46931d4:

    Turns out it's not standard (thanks Samba build farm!)
    And the previous test had a hole in it anyway.  This one is more conservative.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Wed Jul  6 08:34:05 CEST 2011 on sn-devel-104

8 years agobuild: we no longer put #if _SAMBA_BUILD_ == 4 in public headers
Andrew Bartlett [Wed, 6 Jul 2011 03:09:17 +0000 (13:09 +1000)]
build: we no longer put #if _SAMBA_BUILD_ == 4 in public headers

Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Wed Jul  6 06:46:50 CEST 2011 on sn-devel-104

8 years agos3-build We no longer require to redefine _SAMBA_BUILD_
Andrew Bartlett [Wed, 6 Jul 2011 02:49:11 +0000 (12:49 +1000)]
s3-build We no longer require to redefine _SAMBA_BUILD_

8 years agolibcli/smb move FILE_TYPE constants in common
Andrew Bartlett [Wed, 6 Jul 2011 03:06:14 +0000 (13:06 +1000)]
libcli/smb move FILE_TYPE constants in common

This allows us to remove another _SAMBA_BUILD_ conditional

Andrew Bartlett

8 years agolibcli/smb move enum protocol_types to a common header
Andrew Bartlett [Wed, 6 Jul 2011 03:05:45 +0000 (13:05 +1000)]
libcli/smb move enum protocol_types to a common header

8 years agobuild: Remove _SAMBA_BUILD == 4 from libgpo
Andrew Bartlett [Wed, 6 Jul 2011 02:39:34 +0000 (12:39 +1000)]
build: Remove _SAMBA_BUILD == 4 from libgpo

This code has no hope of building against the samba4 libs (it has been
disabled for a very long time, and files referenced don't exist etc),
and with the common build there simply is no need.

Andrew Bartlett

8 years agolibrpc/ndr remove _SAMBA_BUILD_ conditionals
Andrew Bartlett [Wed, 6 Jul 2011 02:08:52 +0000 (12:08 +1000)]
librpc/ndr remove _SAMBA_BUILD_ conditionals

8 years agobuild: Re-enable the -Wl,--as-needed flag
Andrew Bartlett [Wed, 6 Jul 2011 01:58:10 +0000 (11:58 +1000)]
build: Re-enable the -Wl,--as-needed flag

8 years agos3:smbd fix a compile warning on AIX 5.3
Christian Ambach [Tue, 5 Jul 2011 22:06:27 +0000 (17:06 -0500)]
s3:smbd fix a compile warning on AIX 5.3

use the correct alias instead of FD directly

Autobuild-User: Christian Ambach <ambi@samba.org>
Autobuild-Date: Tue Jul  5 19:51:42 CEST 2011 on sn-devel-104

8 years agos3:build fix autoconf build on AIX 5.3
Christian Ambach [Tue, 5 Jul 2011 22:04:15 +0000 (17:04 -0500)]
s3:build fix autoconf build on AIX 5.3

using ZLIB_LIBS as dependency made AIX make fail trying to
find -lz as build target

8 years ago.gitignore: add AIX WINBIND nss module
Christian Ambach [Tue, 5 Jul 2011 22:02:23 +0000 (17:02 -0500)]
.gitignore: add AIX WINBIND nss module

this cleans up git status on AIX after building source3

8 years agos3:lib fix non-empty blank lines
Christian Ambach [Tue, 28 Jun 2011 16:01:22 +0000 (18:01 +0200)]
s3:lib fix non-empty blank lines

8 years agos3:modules fix non-empty blank lines
Christian Ambach [Tue, 28 Jun 2011 12:59:18 +0000 (14:59 +0200)]
s3:modules fix non-empty blank lines

8 years agos3: Remove some unused variables
Volker Lendecke [Tue, 5 Jul 2011 15:26:04 +0000 (17:26 +0200)]
s3: Remove some unused variables

Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Tue Jul  5 18:40:11 CEST 2011 on sn-devel-104

8 years agos3: Fix bug 8102
Volker Lendecke [Tue, 5 Jul 2011 09:13:07 +0000 (11:13 +0200)]
s3: Fix bug 8102

We can't allow open with access that has been denied via the share
security descriptor

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Tue Jul  5 16:21:54 CEST 2011 on sn-devel-104

8 years agos3: Calculate&store the maximum share access mask
Volker Lendecke [Mon, 4 Jul 2011 16:35:21 +0000 (18:35 +0200)]
s3: Calculate&store the maximum share access mask

Signed-off-by: Stefan Metzmacher <metze@samba.org>
8 years agos3: Return "granted" from share_access_check
Volker Lendecke [Mon, 4 Jul 2011 15:02:34 +0000 (17:02 +0200)]
s3: Return "granted" from share_access_check

Signed-off-by: Stefan Metzmacher <metze@samba.org>
8 years agoldb: set -Wl,-no-undefined only on standalone build
Andrew Bartlett [Tue, 5 Jul 2011 05:55:25 +0000 (15:55 +1000)]
ldb: set -Wl,-no-undefined only on standalone build

This ensures that the flag is not propogated to other projects, such
as Samba's source3 waf build.

Andrew Bartlett

Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Tue Jul  5 10:37:30 CEST 2011 on sn-devel-104

8 years agoldb: make ldb a top level library for Samba 4.0
Andrew Bartlett [Tue, 5 Jul 2011 00:01:32 +0000 (10:01 +1000)]
ldb: make ldb a top level library for Samba 4.0

Signed-off-by: Andrew Tridgell <tridge@samba.org>
8 years agos4-dbcheck: support the 'none' option for prompts
Andrew Tridgell [Tue, 5 Jul 2011 03:03:18 +0000 (13:03 +1000)]
s4-dbcheck: support the 'none' option for prompts

Pair-Programmed-With: Amitay Isaacs <amitay@gmail.com>

Autobuild-User: Andrew Tridgell <tridge@samba.org>
Autobuild-Date: Tue Jul  5 08:22:40 CEST 2011 on sn-devel-104

8 years agos4-pycommon: support 'none' as an option in confirm
Andrew Tridgell [Tue, 5 Jul 2011 03:02:48 +0000 (13:02 +1000)]
s4-pycommon: support 'none' as an option in confirm

this allows the user to ask for none of the changes of this type

Pair-Programmed-With: Amitay Isaacs <amitay@gmail.com>

8 years agodbcheck: only use a paged search when checking a ldap database
Andrew Tridgell [Tue, 5 Jul 2011 02:44:07 +0000 (12:44 +1000)]
dbcheck: only use a paged search when checking a ldap database

paged searches don't work against a local database (they return only
the first N objects)

8 years agodbcheck: check for unknown attributes and offer to remove them
Andrew Tridgell [Tue, 5 Jul 2011 02:42:53 +0000 (12:42 +1000)]
dbcheck: check for unknown attributes and offer to remove them

this asks the user if they want to remove an unknown attribute. You
can also choose 'all' which will auto-confirm all questions about
removing unknown attributes.

8 years agos4-pycommon: allow an optional 'all' choice for confirm dialogs
Andrew Tridgell [Tue, 5 Jul 2011 02:38:31 +0000 (12:38 +1000)]
s4-pycommon: allow an optional 'all' choice for confirm dialogs

when asking the user to confirm an action, allow for an 'all'
choice, which will be used to allow the user to confirm all future
requests of the same type

8 years agos4-dsdb: allow removal of unknown attributes if RELAX set
Andrew Tridgell [Tue, 5 Jul 2011 02:36:16 +0000 (12:36 +1000)]
s4-dsdb: allow removal of unknown attributes if RELAX set

this allows attributes not known in the schema to be removed if the
caller has set the RELAX control. This will be used by dbcheck to
allow cleaning of bad attributes from the database

8 years agoccan: fix configure tests for __builtin_clz etc.
Rusty Russell [Tue, 5 Jul 2011 03:38:09 +0000 (13:08 +0930)]
ccan: fix configure tests for __builtin_clz etc.

It's not enough to compile-test them: Michael Adam points out that nonexistant
functions merely cause a warning.  We have to try to link them.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Tue Jul  5 07:08:55 CEST 2011 on sn-devel-104

8 years agobuild: remove mktowscript
Andrew Bartlett [Mon, 4 Jul 2011 23:47:25 +0000 (09:47 +1000)]
build: remove mktowscript

We finished the conversion a long time ago

Andrew Bartlett

Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Tue Jul  5 05:56:06 CEST 2011 on sn-devel-104

8 years agobuild: Add missing depencency on NDR_NBT
Andrew Bartlett [Tue, 5 Jul 2011 02:33:27 +0000 (04:33 +0200)]
build: Add missing depencency on NDR_NBT

8 years agobuild: Add missing dep on UTIL_TEVENT
Andrew Bartlett [Tue, 5 Jul 2011 02:22:16 +0000 (04:22 +0200)]
build: Add missing dep on UTIL_TEVENT

8 years agos3:registry: remove unused function regdb_key_is_base_key()
Michael Adam [Mon, 4 Jul 2011 15:45:30 +0000 (17:45 +0200)]
s3:registry: remove unused function regdb_key_is_base_key()

Autobuild-User: Michael Adam <obnox@samba.org>
Autobuild-Date: Mon Jul  4 21:11:32 CEST 2011 on sn-devel-104

8 years agos3:registry: replace use of deprecated talloc_destroy by talloc_free.
Michael Adam [Mon, 4 Jul 2011 15:22:01 +0000 (17:22 +0200)]
s3:registry: replace use of deprecated talloc_destroy by talloc_free.

8 years agos3:registry: remove superfluous check for success of talloc_stackframe()
Michael Adam [Mon, 4 Jul 2011 15:21:23 +0000 (17:21 +0200)]
s3:registry: remove superfluous check for success of talloc_stackframe()

8 years agos3:registry: add debug-level-10 verbosity to regdb_upgrade_v2_v3_fn()
Michael Adam [Mon, 4 Jul 2011 15:20:28 +0000 (17:20 +0200)]
s3:registry: add debug-level-10 verbosity to regdb_upgrade_v2_v3_fn()

8 years agos3:registry: adapt a debug message to be more systematic
Michael Adam [Mon, 4 Jul 2011 15:13:58 +0000 (17:13 +0200)]
s3:registry: adapt a debug message to be more systematic

8 years agos3:registry: set registry version to 3 and add upgrade code
Michael Adam [Mon, 4 Jul 2011 14:23:08 +0000 (16:23 +0200)]
s3:registry: set registry version to 3 and add upgrade code

Pair-Programmed-With: Gregor Beck <gbeck@sernet.de>

8 years agos3:registry: add db_context argument to regdb_upgrade_v1_to_v2()
Michael Adam [Mon, 4 Jul 2011 14:21:26 +0000 (16:21 +0200)]
s3:registry: add db_context argument to regdb_upgrade_v1_to_v2()

8 years agos3:registry: wrap the whole db upgrade in one transaction
Michael Adam [Mon, 4 Jul 2011 14:15:11 +0000 (16:15 +0200)]
s3:registry: wrap the whole db upgrade in one transaction

The purpose of this is to prepare for multiple upgrade steps
to be performed in a single transaction, so that no change
at all is made to that database if one step fails.

Pair-Programmed-With: Gregor Beck <gbeck@sernet.de>

8 years agos3:registry: change regdb_store_regdb_version() to take db_context argument.
Michael Adam [Mon, 4 Jul 2011 14:09:33 +0000 (16:09 +0200)]
s3:registry: change regdb_store_regdb_version() to take db_context argument.

8 years agos3:registry: fix a comment typo
Michael Adam [Mon, 4 Jul 2011 13:23:39 +0000 (15:23 +0200)]
s3:registry: fix a comment typo

8 years agos3:registry: remove unused regdb_delete_sorted_subkeys()
Michael Adam [Fri, 1 Jul 2011 11:49:12 +0000 (13:49 +0200)]
s3:registry: remove unused regdb_delete_sorted_subkeys()

Pair-Programmed-With: Gregor Beck <gbeck@sernet.de>

8 years agos3:registry: don't delete the unused subkeys cache record any more
Michael Adam [Fri, 1 Jul 2011 11:48:16 +0000 (13:48 +0200)]
s3:registry: don't delete the unused subkeys cache record any more

Pair-Programmed-With: Gregor Beck <gbeck@sernet.de>

8 years agos3:registry: remove the code to create and search the sorted subkeys cache records
Michael Adam [Fri, 1 Jul 2011 11:37:41 +0000 (13:37 +0200)]
s3:registry: remove the code to create and search the sorted subkeys cache records

This is not needed any more.

Pair-Programmed-With: Gregor Beck <gbeck@sernet.de>