--- /dev/null
+#
+# "$Id: lsb-samba.spec,v 1.2 2001/07/03 01:01:12 jra Exp $"
+#
+# Linux Standards Based RPM "spec" file for SAMBA.
+#
+
+Summary: SAMBA
+Name: lsb-samba
+Version: 2.2.1
+Release: 0
+Copyright: GPL
+Group: System Environment/Daemons
+Source: ftp://ftp.samba.org/pub/samba/samba-%{version}.tar.gz
+Url: http://www.samba.org
+Packager: Michael Sweet <mike@easysw.com>
+Vendor: SAMBA Team
+
+# Require the "lsb" package, which guarantees LSB compliance.
+Requires: lsb
+
+# use BuildRoot so as not to disturb the version already installed
+BuildRoot: /var/tmp/%{name}-root
+
+%description
+
+%prep
+%setup
+
+%build
+export LDFLAGS="-L/usr/lib/lsb --dynamic-linker=/lib/ld-lsb.so.1"
+
+./configure --with-fhs --prefix=/usr --sysconfdir=/etc \
+ --sharedstatedir=/var --datadir=/usr/share \
+ --with-configdir=/etc/samba \
+ --with-swatdir=/usr/share/samba/swat
+
+# If we got this far, all prerequisite libraries must be here.
+make
+
+%install
+# Make sure the RPM_BUILD_ROOT directory exists.
+rm -rf $RPM_BUILD_ROOT
+mkdir $RPM_BUILD_ROOT
+
+make \
+ BASEDIR=$RPM_BUILD_ROOT/usr \
+ BINDIR=$RPM_BUILD_ROOT/usr/bin \
+ CODEPAGEDIR=$RPM_BUILD_ROOT/usr/share/samba/codepages \
+ CONFIGDIR=$RPM_BUILD_ROOT/etc/samba \
+ INCLUDEDIR=$RPM_BUILD_ROOT/usr/include \
+ LIBDIR=$RPM_BUILD_ROOT/usr/lib \
+ LOCKDIR=$RPM_BUILD_ROOT/var/lock/samba \
+ LOGFILEBASE=$RPM_BUILD_ROOT/var/log/samba \
+ MANDIR=$RPM_BUILD_ROOT/usr/share/man \
+ SBINDIR=$RPM_BUILD_ROOT/usr/sbin \
+ SWATDIR=$RPM_BUILD_ROOT/usr/share/samba/swat \
+ VARDIR=$RPM_BUILD_ROOT/var \
+ install
+
+mkdir -p $RPM_BUILD_ROOT/etc/init.d
+install -m 700 packaging/LSB/samba.sh /etc/init.d/samba
+
+mkdir -p $RPM_BUILD_ROOT/etc/samba
+install -m 644 packaging/LSB/smb.conf /etc/samba
+
+mkdir -p $RPM_BUILD_ROOT/etc/xinetd.d
+install -m 644 packaging/LSB/samba.xinetd /etc/xinetd.d/samba
+
+%post
+/usr/lib/lsb/install_initd /etc/init.d/samba
+
+%preun
+/usr/lib/lsb/remove_initd /etc/init.d/samba
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%dir /etc/init.d
+/etc/init.d/samba
+%dir /etc/samba
+%config(noreplace) /etc/samba/smb.conf
+%dir /etc/samba/private
+%dir /etc/xinetd.d
+%config(noreplace) /etc/xinetd.d/samba
+%dir /usr/bin
+/usr/bin/*
+%dir /usr/sbin
+/usr/sbin/*
+%dir /usr/share/man
+/usr/share/man/*
+%dir /usr/share/samba
+/usr/share/samba/*
+%dir /var/lock/samba
+%dir /var/log/samba
+
+#
+# End of "$Id: lsb-samba.spec,v 1.2 2001/07/03 01:01:12 jra Exp $".
+#
--- /dev/null
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options (perhaps too
+# many!) most of which are not shown in this example
+#
+# Any line which starts with a ; (semi-colon) or a # (hash)
+# is a comment and is ignored. In this example we will use a #
+# for commentry and a ; for parts of the config file that you
+# may wish to enable
+#
+# NOTE: Whenever you modify this file you should run the command "testparm"
+# to check that you have not made any basic syntactic errors.
+#
+#======================= Global Settings =====================================
+[global]
+
+# workgroup = NT-Domain-Name or Workgroup-Name
+ workgroup = MYGROUP
+
+# server string is the equivalent of the NT Description field
+ server string = Samba Server
+
+# This option is important for security. It allows you to restrict
+# connections to machines which are on your local network. The
+# following example restricts access to two C class networks and
+# the "loopback" interface. For more examples of the syntax see
+# the smb.conf man page
+; hosts allow = 192.168.1. 192.168.2. 127.
+
+# if you want to automatically load your printer list rather
+# than setting them up individually then you'll need this
+ printcap name = /etc/printcap
+ load printers = yes
+
+# It should not be necessary to spell out the print system type unless
+# yours is non-standard. Currently supported print systems include:
+# bsd, sysv, plp, lprng, aix, hpux, qnx
+; printing = bsd
+
+# Uncomment this if you want a guest account, you must add this to /etc/passwd
+# otherwise the user "nobody" is used
+; guest account = pcguest
+
+# this tells Samba to use a separate log file for each machine
+# that connects
+ log file = /var/log/samba/log.%m
+
+# Put a capping on the size of the log files (in Kb).
+ max log size = 50
+
+# Security mode. Most people will want user level security. See
+# security_level.txt for details.
+ security = user
+# Use password server option only with security = server
+; password server = <NT-Server-Name>
+
+# Password Level allows matching of _n_ characters of the password for
+# all combinations of upper and lower case.
+; password level = 8
+; username level = 8
+
+# You may wish to use password encryption. Please read
+# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
+# Do not enable this option unless you have read those documents
+; encrypt passwords = yes
+; smb passwd file = /etc/samba/smbpasswd
+
+# The following are needed to allow password changing from Windows to
+# update the Linux sytsem password also.
+# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
+# NOTE2: You do NOT need these to allow workstations to change only
+# the encrypted SMB passwords. They allow the Unix password
+# to be kept in sync with the SMB password.
+; unix password sync = Yes
+; passwd program = /usr/bin/passwd %u
+; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
+
+# Unix users can map to different SMB User names
+; username map = /etc/samba/smbusers
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting
+; include = /etc/samba/smb.conf.%m
+
+# Most people will find that this option gives better performance.
+# See speed.txt and the manual pages for details
+ socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
+
+# Configure Samba to use multiple interfaces
+# If you have multiple network interfaces then you must list them
+# here. See the man page for details.
+; interfaces = 192.168.12.2/24 192.168.13.2/24
+
+# Configure remote browse list synchronisation here
+# request announcement to, or browse list sync from:
+# a specific host or from / to a whole subnet (see below)
+; remote browse sync = 192.168.3.25 192.168.5.255
+# Cause this host to announce itself to local subnets here
+; remote announce = 192.168.1.255 192.168.2.44
+
+# Browser Control Options:
+# set local master to no if you don't want Samba to become a master
+# browser on your network. Otherwise the normal election rules apply
+; local master = no
+
+# OS Level determines the precedence of this server in master browser
+# elections. The default value should be reasonable
+; os level = 33
+
+# Domain Master specifies Samba to be the Domain Master Browser. This
+# allows Samba to collate browse lists between subnets. Don't use this
+# if you already have a Windows NT domain controller doing this job
+; domain master = yes
+
+# Preferred Master causes Samba to force a local browser election on startup
+# and gives it a slightly higher chance of winning the election
+; preferred master = yes
+
+# Use only if you have an NT server on your network that has been
+# configured at install time to be a primary domain controller.
+; domain controller = <NT-Domain-Controller-SMBName>
+
+# Enable this if you want Samba to be a domain logon server for
+# Windows95 workstations.
+; domain logons = yes
+
+# if you enable domain logons then you may want a per-machine or
+# per user logon script
+# run a specific logon batch file per workstation (machine)
+; logon script = %m.bat
+# run a specific logon batch file per username
+; logon script = %U.bat
+
+# Where to store roving profiles (only for Win95 and WinNT)
+# %L substitutes for this servers netbios name, %U is username
+# You must uncomment the [Profiles] share below
+; logon path = \\%L\Profiles\%U
+
+# All NetBIOS names must be resolved to IP Addresses
+# 'Name Resolve Order' allows the named resolution mechanism to be specified
+# the default order is "host lmhosts wins bcast". "host" means use the unix
+# system gethostbyname() function call that will use either /etc/hosts OR
+# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
+# and the /etc/resolv.conf file. "host" therefore is system configuration
+# dependant. This parameter is most often of use to prevent DNS lookups
+# in order to resolve NetBIOS names to IP Addresses. Use with care!
+# The example below excludes use of name resolution for machines that are NOT
+# on the local network segment
+# - OR - are not deliberately to be known via lmhosts or via WINS.
+; name resolve order = wins lmhosts bcast
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
+; wins support = yes
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+; wins server = w.x.y.z
+
+# WINS Proxy - Tells Samba to answer name resolution queries on
+# behalf of a non WINS capable client, for this to work there must be
+# at least one WINS Server on the network. The default is NO.
+; wins proxy = yes
+
+# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
+# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
+# this has been changed in version 1.9.18 to no.
+ dns proxy = no
+
+# Case Preservation can be handy - system default is _no_
+# NOTE: These can be set on a per share basis
+; preserve case = no
+; short preserve case = no
+# Default case is normally upper case for all DOS files
+; default case = lower
+# Be very careful with case sensitivity - it can break things!
+; case sensitive = no
+
+#============================ Share Definitions ==============================
+[homes]
+ comment = Home Directories
+ browseable = no
+ writable = yes
+
+# Un-comment the following and create the netlogon directory for Domain Logons
+; [netlogon]
+; comment = Network Logon Service
+; path = /home/netlogon
+; guest ok = yes
+; writable = no
+; share modes = no
+
+
+# Un-comment the following to provide a specific roving profile share
+# the default is to use the user's home directory
+;[Profiles]
+; path = /home/profiles
+; browseable = no
+; guest ok = yes
+
+
+# NOTE: If you have a BSD-style print system there is no need to
+# specifically define each individual printer
+[printers]
+ comment = All Printers
+ path = /var/spool/samba
+ browseable = no
+# Set public = yes to allow user 'guest account' to print
+ guest ok = no
+ writable = no
+ printable = yes
+
+# This one is useful for people to share files
+;[tmp]
+; comment = Temporary file space
+; path = /tmp
+; read only = no
+; public = yes
+
+# A publicly accessible directory, but read only, except for people in
+# the "staff" group
+;[public]
+; comment = Public Stuff
+; path = /home/samba
+; public = yes
+; read only = yes
+; write list = @staff
+
+# Other examples.
+#
+# A private printer, usable only by fred. Spool data will be placed in fred's
+# home directory. Note that fred must have write access to the spool directory,
+# wherever it is.
+;[fredsprn]
+; comment = Fred's Printer
+; valid users = fred
+; path = /homes/fred
+; printer = freds_printer
+; public = no
+; writable = no
+; printable = yes
+
+# A private directory, usable only by fred. Note that fred requires write
+# access to the directory.
+;[fredsdir]
+; comment = Fred's Service
+; path = /usr/somewhere/private
+; valid users = fred
+; public = no
+; writable = yes
+; printable = no
+
+# a service which has a different directory for each machine that connects
+# this allows you to tailor configurations to incoming machines. You could
+# also use the %u option to tailor it by user name.
+# The %m gets replaced with the machine name that is connecting.
+;[pchome]
+; comment = PC Directories
+; path = /usr/pc/%m
+; public = no
+; writable = yes
+
+# A publicly accessible directory, read/write to all users. Note that all files
+# created in the directory by users will be owned by the default user, so
+# any user with access can delete any other user's files. Obviously this
+# directory must be writable by the default user. Another user could of course
+# be specified, in which case all files would be owned by that user instead.
+;[public]
+; path = /usr/somewhere/else/public
+; public = yes
+; only guest = yes
+; writable = yes
+; printable = no
+
+# The following two entries demonstrate how to share a directory so that two
+# users can place files there that will be owned by the specific users. In this
+# setup, the directory should be writable by both users and should have the
+# sticky bit set on it to prevent abuse. Obviously this could be extended to
+# as many users as required.
+;[myshare]
+; comment = Mary's and Fred's stuff
+; path = /usr/somewhere/shared
+; valid users = mary fred
+; public = no
+; writable = yes
+; printable = no
+; create mask = 0765
+
+
git.samba.org / kai / samba.git / commitdiff