#ifndef _LOCAL_H
#define _LOCAL_H
-/* The default workgroup - usually overridden in smb.conf */
-#ifndef WORKGROUP
-#define WORKGROUP "WORKGROUP"
-#endif
-
-/* This defines the section name in the configuration file that will contain */
-/* global parameters - that is, parameters relating to the whole server, not */
-/* just services. This name is then reserved, and may not be used as a */
-/* a service name. It will default to "global" if not defined here. */
-#define GLOBAL_NAME "global"
-#define GLOBAL_NAME2 "globals"
-
-/* This defines the section name in the configuration file that will
- refer to the special "homes" service */
-#define HOMES_NAME "homes"
-
-/* This defines the section name in the configuration file that will
- refer to the special "printers" service */
-#define PRINTERS_NAME "printers"
-
/* Yves Gaige <yvesg@hptnodur.grenoble.hp.com> requested this set this */
/* to a maximum of 8 if old smb clients break because of long printer names. */
#define MAXPRINTERLEN 15
/* max number of directories open at once */
/* note that with the new directory code this no longer requires a
file handle per directory, but large numbers do use more memory */
-#define MAX_OPEN_DIRECTORIES 64
+#define MAX_OPEN_DIRECTORIES 256
+
+/* max number of directory handles */
+/* As this now uses the bitmap code this can be
+ quite large. */
+#define MAX_DIRECTORY_HANDLES 2048
-/* define what facility to use for syslog */
-#ifndef SYSLOG_FACILITY
-#define SYSLOG_FACILITY LOG_DAEMON
+/* maximum number of file caches per smbd */
+#define MAX_WRITE_CACHES 10
+
+/*
+ * Fudgefactor required for open tdb's, etc.
+ */
+
+#ifndef MAX_OPEN_FUDGEFACTOR
+#define MAX_OPEN_FUDGEFACTOR 20
#endif
-/* Default size of shared memory used for share mode locking */
-#ifndef SHMEM_SIZE
-#define SHMEM_SIZE (1024*1024)
+/*
+ * Minimum number of open files needed for Windows7 to
+ * work correctly. A little conservative but better that
+ * than run out of fd's.
+ */
+
+#ifndef MIN_OPEN_FILES_WINDOWS
+#define MIN_OPEN_FILES_WINDOWS 16384
#endif
-/* the max number of simultanous connections to the server by all clients */
-#define MAXSTATUS 100000
+/*
+ * Default number of maximum open files per smbd. This is
+ * also limited by the maximum available file descriptors
+ * per process and can also be set in smb.conf as "max open files"
+ * in the [global] section.
+ */
+
+#ifndef MAX_OPEN_FILES
+#define MAX_OPEN_FILES (MIN_OPEN_FILES_WINDOWS + MAX_OPEN_FUDGEFACTOR)
+#endif
#define WORDMAX 0xFFFF
#define MAX_PASS_LEN 200
/* separators for lists */
-#define LIST_SEP " \t,;:\n\r"
+#define LIST_SEP " \t,;\n\r"
-#ifndef LOCKDIR
-/* this should have been set in the Makefile */
-#define LOCKDIR "/tmp/samba"
-#endif
+/* wchar separators for lists */
+#define LIST_SEP_W wchar_list_sep
/* this is where browse lists are kept in the lock dir */
#define SERVER_LIST "browse.dat"
-/* shall guest entries in printer queues get changed to user entries,
- so they can be deleted using the windows print manager? */
-#define LPQ_GUEST_TO_USER
-
/* shall filenames with illegal chars in them get mangled in long
filename listings? */
#define MANGLE_LONG_FILENAMES
/* the size of the directory cache */
#define DIRCACHESIZE 20
-/* what type of filesystem do we want this to show up as in a NT file
- manager window? */
-#define FSTYPE_STRING "Samba"
+/* what default type of filesystem do we want this to show up as in a
+ NT file manager window? */
+#define FSTYPE_STRING "NTFS"
/* the default guest account - normally set in the Makefile or smb.conf */
#ifndef GUEST_ACCOUNT
#define GUEST_ACCOUNT "nobody"
#endif
-/* do you want smbd to send a 1 byte packet to nmbd to trigger it to start
- when smbd starts? */
-#ifndef PRIME_NMBD
-#define PRIME_NMBD 1
-#endif
-
-/* do you want session setups at user level security with a invalid
- password to be rejected or allowed in as guest? WinNT rejects them
- but it can be a pain as it means "net view" needs to use a password
-
- You have 3 choices:
-
- GUEST_SESSSETUP = 0 means session setups with an invalid password
- are rejected.
-
- GUEST_SESSSETUP = 1 means session setups with an invalid password
- are rejected, unless the username does not exist, in which case it
- is treated as a guest login
-
- GUEST_SESSSETUP = 2 means session setups with an invalid password
- are treated as a guest login
-
- Note that GUEST_SESSSETUP only has an effect in user or server
- level security.
- */
-#ifndef GUEST_SESSSETUP
-#define GUEST_SESSSETUP 0
+/* user to test password server with as invalid in security=server mode. */
+#ifndef INVALID_USER_PREFIX
+#define INVALID_USER_PREFIX "sambatest"
#endif
/* the default pager to use for the client "more" command. Users can
#endif
/* the size of the uid cache used to reduce valid user checks */
-#define UID_CACHE_SIZE 4
+#define VUID_CACHE_SIZE 32
/* the following control timings of various actions. Don't change
them unless you know what you are doing. These are all in seconds */
#define DEFAULT_SMBD_TIMEOUT (60*60*24*7)
-#define SMBD_RELOAD_CHECK (60)
+#define SMBD_RELOAD_CHECK (180)
#define IDLE_CLOSED_TIMEOUT (60)
#define DPTR_IDLE_TIMEOUT (120)
-#define SMBD_SELECT_LOOP (10)
+#define SMBD_SELECT_TIMEOUT (60)
#define NMBD_SELECT_LOOP (10)
#define BROWSE_INTERVAL (60)
#define REGISTRATION_INTERVAL (10*60)
#define NMBD_INETD_TIMEOUT (120)
#define NMBD_MAX_TTL (24*60*60)
#define LPQ_LOCK_TIMEOUT (5)
+#define NMBD_INTERFACES_RELOAD (120)
+#define NMBD_UNEXPECTED_TIMEOUT (15)
+#define SMBD_HOUSEKEEPING_INTERVAL SMBD_SELECT_TIMEOUT
/* the following are in milliseconds */
#define LOCK_RETRY_TIMEOUT (100)
accessible to root */
#define DUMP_CORE 1
-#define SMB_ALIGNMENT 1
-
-
/* shall we support browse requests via a FIFO to nmbd? */
#define ENABLE_FIFO 1
-/* how long to wait for a socket connect to happen */
-#define LONG_CONNECT_TIMEOUT 30
-#define SHORT_CONNECT_TIMEOUT 5
+/* how long (in miliseconds) to wait for a socket connect to happen */
+#define LONG_CONNECT_TIMEOUT 30000
+#define SHORT_CONNECT_TIMEOUT 5000
/* the default netbios keepalive timeout */
#define DEFAULT_KEEPALIVE 300
it are worked out */
#define USE_READ_PREDICTION 0
-/* name of directory that netatalk uses to store macintosh resource forks */
-#define APPLEDOUBLE ".AppleDouble/"
+/* Minimum length of allowed password when changing UNIX password. */
+#define MINPASSWDLENGTH 5
+
+/* maximum ID number used for session control. This cannot be larger
+ than 62*62 for the current code */
+#define MAX_SESSION_ID 3000
+
+/* For the benifit of PAM and the 'session exec' scripts, we fake up a terminal
+ name. This can be in one of two forms: The first for systems not using
+ utmp (and therefore not constrained as to length or the need for a number
+ < 3000 or so) and the second for systems with this 'well behaved terminal
+ like name' constraint.
+*/
+
+#ifndef SESSION_TEMPLATE
+/* Paramaters are 'pid' and 'vuid' */
+#define SESSION_TEMPLATE "smb/%lu/%llu"
+#endif
+
+#ifndef SESSION_UTMP_TEMPLATE
+#define SESSION_UTMP_TEMPLATE "smb/%d"
+#endif
+
+/* the maximum age in seconds of a password. Should be a lp_ parameter */
+#define MAX_PASSWORD_AGE (21*24*60*60)
+
+/* Default allocation roundup. */
+#define SMB_ROUNDUP_ALLOCATION_SIZE 0x100000
+
+/* shall we deny oplocks to clients that get timeouts? */
+#define FASCIST_OPLOCK_BACKOFF 1
+
+/* this enables the "rabbit pellet" fix for SMBwritebraw */
+#define RABBIT_PELLET_FIX 1
+
+/* Max number of open RPC pipes. */
+#define MAX_OPEN_PIPES 2048
+
+/* Tuning for server auth mutex. */
+#define CLI_AUTH_TIMEOUT 5000 /* In milli-seconds. */
+#define NUM_CLI_AUTH_CONNECT_RETRIES 3
+/* Number in seconds to wait for the mutex. This must be less than 30 seconds. */
+#define SERVER_MUTEX_WAIT_TIME ( ((NUM_CLI_AUTH_CONNECT_RETRIES) * ((CLI_AUTH_TIMEOUT)/1000)) + 5)
+/* Number in seconds for winbindd to wait for the mutex. Make this 2 * smbd wait time. */
+#define WINBIND_SERVER_MUTEX_WAIT_TIME (( ((NUM_CLI_AUTH_CONNECT_RETRIES) * ((CLI_AUTH_TIMEOUT)/1000)) + 5)*2)
+
+/* Buffer size to use when printing backtraces */
+#define BACKTRACE_STACK_SIZE 64
+
+/* size of listen() backlog in smbd */
+#define SMBD_LISTEN_BACKLOG 50
+
+/* Number of microseconds to wait before a sharing violation. */
+#define SHARING_VIOLATION_USEC_WAIT 950000
+
+/* Number of microseconds to wait before a updating the write time (2 secs). */
+#define WRITE_TIME_UPDATE_USEC_DELAY 2000000
+
+#define MAX_LDAP_REPLICATION_SLEEP_TIME 5000 /* In milliseconds. */
+
+/* tdb hash size for the open database. */
+#define SMB_OPEN_DATABASE_TDB_HASH_SIZE 10007
+
+/* Characters we disallow in sharenames. */
+#define INVALID_SHARENAME_CHARS "%<>*?|/\\+=;:\","
+
+/* Seconds between connection attempts to a remote server. */
+#define FAILED_CONNECTION_CACHE_TIMEOUT (LONG_CONNECT_TIMEOUT * 2 / 1000)
+
+/* Default hash size for the winbindd cache. */
+#define WINBINDD_CACHE_TDB_DEFAULT_HASH_SIZE 5000
+
+/* Windows minimum lock resolution timeout in ms */
+#define WINDOWS_MINIMUM_LOCK_TIMEOUT_MS 200
+
+/* Maximum size of RPC data we will accept for one call. */
+#define MAX_RPC_DATA_SIZE (15*1024*1024)
+
+#define CLIENT_NDR_PADDING_SIZE 8
+#define SERVER_NDR_PADDING_SIZE 8
+
+#define DEFAULT_SMB2_MAX_READ (1024*1024)
+#define DEFAULT_SMB2_MAX_WRITE (1024*1024)
+#define DEFAULT_SMB2_MAX_TRANSACT (1024*1024)
+#define DEFAULT_SMB2_MAX_CREDITS 8192
#endif
git.samba.org / kai / samba.git / blobdiff