Matthieu Patou [Fri, 13 May 2011 12:04:07 +0000 (16:04 +0400)]
s4-python: raise an error if unable to bind remote ldap while joining
Jeremy Allison [Mon, 16 May 2011 19:20:14 +0000 (12:20 -0700)]
Fix the SMB2 showstopper, found by an extended torture test from Volker.
In the oplock refactoring, the algorithm underwent an unnoticed change.
In 3.5.x stat_opens were silently (i.e. no explicit code had comments
explaining this) ignored when looking for oplock breaks and share mode
violations. After the refactoring, the function find_oplock_types()
no longer ignored stat_open entries in the share mode table when looking
for batch and exclusive oplocks. This patch adds two changes to find_oplock_types()
to ignore the case where the incoming open request is a stat open being
tested against existing opens, and also when the incoming open request
is a non-stat open being tested against existing stat opens. Neither
of these cause an oplock break or share mode violation. Thanks a *lot*
to Volker, who persevered in reproducing this problem.
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Mon May 16 22:38:20 CEST 2011 on sn-devel-104
Jeremy Allison [Mon, 16 May 2011 17:41:51 +0000 (10:41 -0700)]
Ensure we always write the correct incoming mid into the share mode
table entries.
Andreas Schneider [Mon, 16 May 2011 14:50:51 +0000 (16:50 +0200)]
s3-rpc_server: Force ncalrpc dir to be mode 755.
This completes
aae9353ecf56323b63da66aa84d8a0a4f219d94d.
directory_create_or_exist() is not needed cause create_pipe_sock() takes
care of setting up the directory correctly.
Andrew please check!
Autobuild-User: Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date: Mon May 16 17:54:20 CEST 2011 on sn-devel-104
David Disseldorp [Mon, 16 May 2011 11:26:41 +0000 (13:26 +0200)]
s3-printing: remove cups_pull_comment_location from header file
Signed-off-by: Günther Deschner <gd@samba.org>
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Mon May 16 16:03:57 CEST 2011 on sn-devel-104
Volker Lendecke [Mon, 16 May 2011 11:30:26 +0000 (13:30 +0200)]
s3: Document gpfs:syncio
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Mon May 16 15:00:40 CEST 2011 on sn-devel-104
Gregor Beck [Thu, 5 May 2011 14:28:58 +0000 (16:28 +0200)]
gpfs.so: Add gpfs:syncio option
This enables optimizations for shared file access on gpfs
Andreas Schneider [Mon, 16 May 2011 09:56:14 +0000 (11:56 +0200)]
waf: Enable Samba3 torture tests in top level build.
Signed-off-by: Günther Deschner <gd@samba.org>
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Mon May 16 13:57:01 CEST 2011 on sn-devel-104
Günther Deschner [Mon, 16 May 2011 10:48:10 +0000 (12:48 +0200)]
s3-selftest: no point in running base.chkpath and base.delaywrite twice.
Thanks to Bjoern Baumbach for pointing this out!
Guenther
Signed-off-by: Günther Deschner <gd@samba.org>
Andreas Schneider [Fri, 13 May 2011 08:57:33 +0000 (10:57 +0200)]
s3-printing: Remove obsolete and unused cups_pull_comment_location().
Signed-off-by: Günther Deschner <gd@samba.org>
Andreas Schneider [Fri, 13 May 2011 08:28:20 +0000 (10:28 +0200)]
s3-spoolss: Get the printer location from cups.
Signed-off-by: Günther Deschner <gd@samba.org>
Günther Deschner [Fri, 13 May 2011 08:02:42 +0000 (10:02 +0200)]
s3-printing: Get the location info from cups.
Signed-off-by: Günther Deschner <gd@samba.org>
Andreas Schneider [Fri, 13 May 2011 08:27:46 +0000 (10:27 +0200)]
s3: Added waf build header locations for clang complete.
Signed-off-by: Günther Deschner <gd@samba.org>
Günther Deschner [Wed, 11 May 2011 21:50:23 +0000 (23:50 +0200)]
s4-smbtorture: add test_netremotetod.
Guenther
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Mon May 16 12:45:52 CEST 2011 on sn-devel-104
Günther Deschner [Wed, 11 May 2011 21:37:08 +0000 (23:37 +0200)]
s4-libcli/rap: add smbcli_rap_netremotetod().
Guenther
Günther Deschner [Wed, 11 May 2011 21:35:21 +0000 (23:35 +0200)]
s3-rap: add rap_NetRemoteTOD to IDL.
Guenther
Christian Ambach [Fri, 6 May 2011 11:16:26 +0000 (13:16 +0200)]
s3:libsmb convert user-specified domain to uppercase
with client ntlmv2 auth = yes, there is a small difference between
using smbclient -U user\domain and smbclient -U user -W domain
if domain is provided in lowercase
using -W will uppercase the given parameter, while picking the
domain name from -U will not convert it to uppercase and this
leads to failing NTLMv2 authentication
with this patch, there is no difference between
smbclient -U domain\user and smbclient -U user -W domain any more
Autobuild-User: Christian Ambach <ambi@samba.org>
Autobuild-Date: Mon May 16 11:42:55 CEST 2011 on sn-devel-104
Volker Lendecke [Sun, 15 May 2011 21:26:10 +0000 (23:26 +0200)]
s3: Fix return check in nss_wins
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Mon May 16 00:30:42 CEST 2011 on sn-devel-104
Volker Lendecke [Sat, 14 May 2011 16:04:49 +0000 (18:04 +0200)]
s3: Make&use set_socket_addr_v4
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Sat May 14 18:57:57 CEST 2011 on sn-devel-104
Volker Lendecke [Sat, 14 May 2011 15:39:40 +0000 (17:39 +0200)]
Use ZERO_STRUCTP in util_net
Volker Lendecke [Sat, 14 May 2011 11:15:19 +0000 (13:15 +0200)]
s3: Paranoia in smbsock_connect_state_destructor
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Sat May 14 14:19:01 CEST 2011 on sn-devel-104
Andrew Bartlett [Fri, 13 May 2011 15:55:41 +0000 (17:55 +0200)]
s3-param Deprecate a number of security parameters for 3.6
This follows up on the agreement on the samba-technical list in Jan
2011 to deprecate these options, and to possibly remove these in the
4.0 release after user feedback.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Fri May 13 19:51:41 CEST 2011 on sn-devel-104
Luke Howard [Thu, 12 May 2011 18:52:52 +0000 (20:52 +0200)]
do an explicit A record search for SRV entries
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Andrew Bartlett [Fri, 13 May 2011 09:49:49 +0000 (11:49 +0200)]
s3-build: use ndr-standard in msrpc3
This avoids pulling in the symbols from the NDR_ subsystems directly.
Andrew Bartlett
Andrew Bartlett [Fri, 13 May 2011 09:48:14 +0000 (11:48 +0200)]
build: Move NDR_DSSETUP and NDR_SPOOLSS into ndr-standard
This is to address multiple defintion of symbol issues in msrpc3
linked libraries.
Andrew Bartlett
Andrew Bartlett [Fri, 13 May 2011 08:26:20 +0000 (10:26 +0200)]
lib/util/charset Move built-in charset modules to the top level
This removes the 'charset' subsystem and allows these modules to be
used across the whole of Samba.
Andrew Bartlett
Andrew Bartlett [Tue, 10 May 2011 20:11:55 +0000 (22:11 +0200)]
s3-netapi Initialise global variables in libnetapi
It is important to initalise the global variables when loading this
configuration for the potentially first time.
Andrew Bartlett
Andrew Bartlett [Tue, 10 May 2011 20:08:36 +0000 (22:08 +0200)]
s3-libnetapi Don't create a talloc_stackframe() in a global variable
This also ensures that libnetapi_free() invalidates the global
stat_ctx variable, and changes the API so that the behaviour of the
error string routines is to consistently return a allocated string.
Pair-Programmed-With: Günther Deschner <gd@samba.org>
Andrew Bartlett
Andrew Bartlett [Mon, 9 May 2011 15:43:45 +0000 (17:43 +0200)]
lib/util/ Fix crash bug caused by gfree_debug()
The issue is that we should reset the debug_num_classes to 0 when we
un-initialise the debug system.
Andrew Bartlett
Günther Deschner [Fri, 13 May 2011 13:03:59 +0000 (15:03 +0200)]
s3-net: fix potential crash bug in display_print_driver3().
Guenther
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Fri May 13 18:49:06 CEST 2011 on sn-devel-104
Michael Adam [Fri, 6 May 2011 15:10:13 +0000 (17:10 +0200)]
s3:build: install libtdb with full version number instead of only SO version
Autobuild-User: Michael Adam <obnox@samba.org>
Autobuild-Date: Fri May 13 17:45:01 CEST 2011 on sn-devel-104
Michael Adam [Fri, 6 May 2011 15:10:13 +0000 (17:10 +0200)]
s3:build: install libtalloc with full version number instead of only SO version
Michael Adam [Fri, 6 May 2011 15:00:32 +0000 (17:00 +0200)]
s3:build: build libtalloc.so.$VERSION with full version number instead only SO version
Michael Adam [Fri, 6 May 2011 15:00:32 +0000 (17:00 +0200)]
s3:build: build libtdb.so.$VERSION with full version number instead only SO version
Michael Adam [Fri, 6 May 2011 14:43:31 +0000 (16:43 +0200)]
s3:build: link libtdb as shared lib if using shared libs at all
Michael Adam [Fri, 6 May 2011 14:42:53 +0000 (16:42 +0200)]
s3:build: determine full version of libtdb for the samba build
Michael Adam [Fri, 6 May 2011 14:42:07 +0000 (16:42 +0200)]
s3:build: link libtalloc as shared lib if using shared libs at all
Michael Adam [Fri, 6 May 2011 14:40:59 +0000 (16:40 +0200)]
s3:build: determine full version of libtalloc for the samba build
Michael Adam [Fri, 6 May 2011 14:39:03 +0000 (16:39 +0200)]
s3:build: fix typo in definition of --enable-external-libtdb
Michael Adam [Fri, 6 May 2011 14:38:38 +0000 (16:38 +0200)]
s3:build: reformat AC_ARG_ENABLE(external_libtalloc...)
Michael Adam [Fri, 6 May 2011 10:57:03 +0000 (12:57 +0200)]
s3:build: print the full version number in the showlibs targets
Michael Adam [Fri, 6 May 2011 14:37:58 +0000 (16:37 +0200)]
s3:build: add LIBWBCLIENT_FULLVER for consistency with SMB_LIBRARY()
Michael Adam [Fri, 6 May 2011 10:44:04 +0000 (12:44 +0200)]
s3:build: add an optional full version argument to the SMB_LIBRARY() macro.
Michael Adam [Fri, 6 May 2011 16:35:06 +0000 (18:35 +0200)]
s3:configure: add --enable-smbtorture4 switch
Simo Sorce [Wed, 11 May 2011 20:38:46 +0000 (16:38 -0400)]
rpc_server: Always use rpc_pipe_open_interface()
This way we can configure which rpc service we actually want to connect to.
By default it uses an "embedded" interface and calls rpc_pipe_open_internal()
Signed-off-by: Günther Deschner <gd@samba.org>
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Fri May 13 14:40:26 CEST 2011 on sn-devel-104
Kamen Mazdrashki [Thu, 12 May 2011 16:43:54 +0000 (19:43 +0300)]
s4/test/getnc_exop: Tune the the test to work against windows
It turns out that sometimes, w2k8-r2 returns objects
even when FSMO extended request has failed.
Also verify that target DC returns source_dsa_guid and
source_dsa_invocation_id correctly
Autobuild-User: Kamen Mazdrashki <kamenim@samba.org>
Autobuild-Date: Fri May 13 02:26:04 CEST 2011 on sn-devel-104
Günther Deschner [Thu, 12 May 2011 22:19:13 +0000 (00:19 +0200)]
s3-libnetjoin: fix uninitialized variable.
Guenther
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Fri May 13 01:22:18 CEST 2011 on sn-devel-104
Günther Deschner [Thu, 12 May 2011 22:15:41 +0000 (00:15 +0200)]
s3-libnetapi/libnetjoin: fix uninitialized variables after the libsmbconf changes.
Guenther
Günther Deschner [Thu, 12 May 2011 22:09:48 +0000 (00:09 +0200)]
libcli/auth/krb5_wrap: correctly use discard_const().
Jeremy, please check.
Guenther
Günther Deschner [Thu, 12 May 2011 15:03:20 +0000 (17:03 +0200)]
s3-lib/smbconf: fix uninitialized error code in smbconf_reg_init().
Guenther
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Thu May 12 18:09:16 CEST 2011 on sn-devel-104
Günther Deschner [Thu, 12 May 2011 12:33:15 +0000 (14:33 +0200)]
s3-waf: stop building smbtortre4.
Guenther
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Thu May 12 15:35:02 CEST 2011 on sn-devel-104
Michael Adam [Wed, 11 May 2011 09:57:10 +0000 (11:57 +0200)]
libcli/auth/smbencrypt: in E_deshash, use talloc_stackframe instead of "#if _SAMBA_BUILD_ == 3" and talloc_tos()
talloc_stackframe() is used in other shared components already,
and if the stack is a talloc_pool, then in most cases, it should
also not be more expensive than directly using talloc_tos().
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Thu May 12 12:52:02 CEST 2011 on sn-devel-104
Michael Adam [Wed, 11 May 2011 14:19:41 +0000 (16:19 +0200)]
s3:registry: add a warning debug message when the sorted subkeys is created from key_exists()
Michael Adam [Wed, 11 May 2011 13:58:48 +0000 (15:58 +0200)]
s3:registry: recreate the sorted subkeys cache when storing keys
This is to avoid turning the next read operation into a write op.
Michael Adam [Wed, 11 May 2011 13:27:01 +0000 (15:27 +0200)]
s3:registry: add create_sorted_subkeys() to delete and recreate the sorted subkeys key
This is to be used from other places than the key_exists() code path.
Michael Adam [Wed, 11 May 2011 12:53:48 +0000 (14:53 +0200)]
s3:registry: turn create_sorted_subkeys_internal to NTSTATUS return type
(from bool)
Michael Adam [Wed, 11 May 2011 12:49:10 +0000 (14:49 +0200)]
s3:registry: rename create_sorted_subkeys() to create_sorted_subkeys_internal()
Michael Adam [Wed, 11 May 2011 12:17:21 +0000 (14:17 +0200)]
s3:registry: fix a typo in a debug message
Volker Lendecke [Fri, 6 May 2011 09:26:56 +0000 (11:26 +0200)]
s3: Slightly simplify smbd_smb2_request_next_vector
Metze, Jeremy, please check!
Kamen Mazdrashki [Wed, 11 May 2011 18:05:42 +0000 (21:05 +0300)]
s4/drepl_fsmo: Add an CR so that message is visible in the logs
Autobuild-User: Kamen Mazdrashki <kamenim@samba.org>
Autobuild-Date: Wed May 11 21:03:59 CEST 2011 on sn-devel-104
Kamen Mazdrashki [Wed, 11 May 2011 18:04:54 +0000 (21:04 +0300)]
s4/getnc_exop: Initial implementation of a testsuite for GetNCChanges extended opeartion handling
Kamen Mazdrashki [Wed, 11 May 2011 18:09:34 +0000 (21:09 +0300)]
s4/getncchanges: Pre-mark extended requests as success in case a sub-function "forget" to do this
Kamen Mazdrashki [Wed, 11 May 2011 17:49:42 +0000 (20:49 +0300)]
s4/getncchanges: Implement placeholder for handling ex-op collection of objects
Right now it is solely based on function that handles objects
in normal DsGetNCChanges calls.
Kamen Mazdrashki [Wed, 11 May 2011 17:48:53 +0000 (20:48 +0300)]
s4/getncchanges: Move the code that collects objects into separate function
Kamen Mazdrashki [Mon, 9 May 2011 17:11:22 +0000 (20:11 +0300)]
s4/getncchanges: Don't mask Extended operation result - callers need it
Kamen Mazdrashki [Mon, 9 May 2011 17:09:49 +0000 (20:09 +0300)]
s4/getncchanges: Fail extended request rather than failing whole request
in case that destination_dsa_guid is not valid
Günther Deschner [Wed, 11 May 2011 08:30:42 +0000 (10:30 +0200)]
s3-printing: make cups_pull_comment_location() work again.
we deal with lp_cups_server in cups_connect() already, inside the URI all our
other cups functions we use ipp://localhost, do the same here.
Guenther
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Wed May 11 11:36:07 CEST 2011 on sn-devel-104
Michael Adam [Tue, 10 May 2011 20:02:49 +0000 (22:02 +0200)]
s3:librpc: remove unneded gssapi includes from source3/librpc/crypto/gse.c
These come in via the smb_krb5.h include (and lib/replace/system/kerberos.h)
in the end.
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Autobuild-User: Michael Adam <obnox@samba.org>
Autobuild-Date: Tue May 10 23:12:31 CEST 2011 on sn-devel-104
Michael Adam [Tue, 10 May 2011 19:59:38 +0000 (21:59 +0200)]
libcli/auth: fix "no talloc stackframe around" message from the samba4.blackbox.kinit test
create_kerberos_key_from_string_direct() used talloc_tos() directly.
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Michael Adam [Tue, 10 May 2011 18:54:06 +0000 (20:54 +0200)]
lib/replace: fix an #if HAVE_GSSAPI_GSSAPI_EXT_H to be an #ifdef
Andreas Schneider [Thu, 14 Apr 2011 09:59:57 +0000 (11:59 +0200)]
libsmbconf: Define a doxygen group for libsmbconf.
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:54:11 +0000 (11:54 +0200)]
libsmbconf: Document smbconf_transaction_cancel().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:53:25 +0000 (11:53 +0200)]
libsmbconf: Document smbconf_transaction_commit().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:52:30 +0000 (11:52 +0200)]
libsmbconf: Document smbconf_transaction_start().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:50:05 +0000 (11:50 +0200)]
libsmbconf: Document smbconf_delete_global_includes().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:49:24 +0000 (11:49 +0200)]
libsmbconf: Document smbconf_delete_includes().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:48:15 +0000 (11:48 +0200)]
libsmbconf: Document smbconf_set_global_includes().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:47:41 +0000 (11:47 +0200)]
libsmbconf: Document smbconf_set_includes().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:45:14 +0000 (11:45 +0200)]
libsmbconf: Document smbconf_get_global_includes().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:44:22 +0000 (11:44 +0200)]
libsmbconf: Document smbconf_get_includes().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:38:31 +0000 (11:38 +0200)]
libsmbconf: Document smbconf_delete_global_parameter().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:37:59 +0000 (11:37 +0200)]
libsmbconf: Document smbconf_delete_parameter().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:36:36 +0000 (11:36 +0200)]
libsmbconf: Document smbconf_get_global_parameter().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:35:11 +0000 (11:35 +0200)]
libsmbconf: Document smbconf_get_parameter().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:32:06 +0000 (11:32 +0200)]
libsmbconf: Document smbconf_set_global_parameter().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:31:17 +0000 (11:31 +0200)]
libsmbconf: Document smbconf_set_parameter().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:28:00 +0000 (11:28 +0200)]
libsmbconf: Document smbconf_delete_share().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:27:03 +0000 (11:27 +0200)]
libsmbconf: Document smbconf_get_share().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:25:07 +0000 (11:25 +0200)]
libsmbconf: Document smbconf_create_share().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:23:56 +0000 (11:23 +0200)]
libsmbconf: Document smbconf_share_exists().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:22:25 +0000 (11:22 +0200)]
libsmbconf: Document smbconf_get_share_names().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:19:36 +0000 (11:19 +0200)]
libsmbconf: Document smbconf_get_config().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:13:49 +0000 (11:13 +0200)]
libsmbconf: Document smbconf_drop().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:12:27 +0000 (11:12 +0200)]
libsmbconf: Document smbconf_changed().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:05:09 +0000 (11:05 +0200)]
libsmbconf: Document smbconf_shutdown().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:04:15 +0000 (11:04 +0200)]
libsmbconf: Document smbconf_is_writeable().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Thu, 14 Apr 2011 09:02:49 +0000 (11:02 +0200)]
libsmbconf: Document smbconf_backend_requires_messaging().
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Tue, 12 Apr 2011 09:02:07 +0000 (11:02 +0200)]
s3-waf: Create a public libsmconf.
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Tue, 12 Apr 2011 08:59:20 +0000 (10:59 +0200)]
s3-waf: Create a registry private library.
Signed-off-by: Michael Adam <obnox@samba.org>
Andreas Schneider [Mon, 11 Apr 2011 15:43:10 +0000 (17:43 +0200)]
libsmbconf: Convert smbconf_get_config() to sbcErr.
Signed-off-by: Michael Adam <obnox@samba.org>