Release Announcements
=====================
-This is the first preview release of Samba 4.4. This is *not*
+This is the first release candidate of Samba 4.4. This is *not*
intended for production environments and is designed for testing
purposes only. Please report any defects via the Samba bug reporting
system at https://bugzilla.samba.org/.
Nothing special.
-NEW FEATURES
-============
+
+NEW FEATURES/CHANGES
+====================
+
+Asynchronous flush requests
+---------------------------
Flush requests from SMB2/3 clients are handled asynchronously and do
not block the processing of other requests. Note that 'strict sync'
has to be set to 'yes' for Samba to honor flush requests from SMB
clients.
+s3: smbd
+--------
+
+Remove '--with-aio-support' configure option. We no longer would ever prefer
+POSIX-RT aio, use pthread_aio instead.
+
+samba-tool sites
+----------------
+
+The 'samba-tool sites' subcommand can now be run against another server by
+specifying an LDB URL using the '-H' option and not against the local database
+only (which is still the default when no URL is given).
+
+samba-tool domain demote
+------------------------
+
+Add '--remove-other-dead-server' option to 'samba-tool domain demote'
+subcommand. The new version of this tool now can remove another DC that is
+itself offline. The '--remove-other-dead-server' removes as many references
+to the DC as possible.
+
+samba-tool drs clone-dc-database
+--------------------------------
+
+Replicate an initial clone of domain, but do not join it.
+This is developed for debugging purposes, but not for setting up another DC.
+
+pdbedit
+-------
+
+Add '--set-nt-hash' option to pdbedit to update user password from nt-hash
+hexstring. 'pdbedit -vw' shows also password hashes.
+
+smbstatus
+---------
+
+'smbstatus' was enhanced to show the state of signing and encryption for
+sessions and shares.
+
+smbget
+------
+The -u and -p options for user and password were replaced by the -U option that
+accepts username[%password] as in many other tools of the Samba suite.
+Similary, smbgetrc files do not accept username and password options any more,
+only a single "user" option which also accepts user%password combinations.
+
+s4-rpc_server
+-------------
+
+Add a GnuTLS based backupkey implementation.
+
+ntlm_auth
+---------
+
+Using the '--offline-logon' enables ntlm_auth to use cached passwords when the
+DC is offline.
+
+Allow '--password' force a local password check for ntlm-server-1 mode.
+
+vfs_offline
+-----------
+
+A new VFS module called vfs_offline has been added to mark all files in the
+share as offline. It can be useful for shares mounted on top of a remote file
+system (either through a samba VFS module or via FUSE).
+
+KCC
+---
+
+The Samba KCC has been improved, but is still disabled by default.
+
+DNS
+---
+
+There were several improvements concerning the Samba DNS server.
+
+Active Directory
+----------------
+
+There were some improvements in the Active Directory area.
+
WINS nsswitch module
-====================
+--------------------
The WINS nsswitch module has been rewritten to address memory issues and to
simplify the code. The module now uses libwbclient to do WINS queries. This
means that winbind needs to be running in order to resolve WINS names using
the nss_wins module. This does not affect smbd.
-######################################################################
-Changes
-#######
+CTDB changes
+------------
-smb.conf changes
-----------------
+* CTDB now uses a newly implemented parallel database recovery scheme
+ that avoids deadlocks with smbd.
- Parameter Name Description Default
- -------------- ----------- -------
- aio max threads New 100
+ In certain circumstances CTDB and smbd could deadlock. The new
+ recovery implementation avoid this. It also provides improved
+ recovery performance.
-CTDB changes
-------------
+* All files are now installed into and referred to by the paths
+ configured at build time. Therefore, CTDB will now work properly
+ when installed into the default location at /usr/local.
+
+* Public CTDB header files are no longer installed, since Samba and
+ CTDB are built from within the same source tree.
+
+* CTDB_DBDIR can now be set to tmpfs[:<tmpfs-options>]
+
+ This will cause volatile TDBs to be located in a tmpfs. This can
+ help to avoid performance problems associated with contention on the
+ disk where volatile TDBs are usually stored. See ctdbd.conf(5) for
+ more details.
* Configuration variable CTDB_NATGW_SLAVE_ONLY is no longer used.
Instead, nodes should be annotated with the "slave-only" option in
across nodes in a NAT gateway group. See ctdbd.conf(5) for more
details.
+* New event script 05.system allows various system resources to be
+ monitored
+
+ This can be helpful for explaining poor performance or unexpected
+ behaviour. New configuration variables are
+ CTDB_MONITOR_FILESYSTEM_USAGE, CTDB_MONITOR_MEMORY_USAGE and
+ CTDB_MONITOR_SWAP_USAGE. Default values cause warnings to be
+ logged. See the SYSTEM RESOURCE MONITORING CONFIGURATION in
+ ctdbd.conf(5) for more information.
+
+ The memory, swap and filesystem usage monitoring previously found in
+ 00.ctdb and 40.fs_use is no longer available. Therefore,
+ configuration variables CTDB_CHECK_FS_USE, CTDB_MONITOR_FREE_MEMORY,
+ CTDB_MONITOR_FREE_MEMORY_WARN and CTDB_CHECK_SWAP_IS_NOT_USED are
+ now ignored.
+
+* The 62.cnfs eventscript has been removed. To get a similar effect
+ just do something like this:
+
+ mmaddcallback ctdb-disable-on-quorumLoss \
+ --command /usr/bin/ctdb \
+ --event quorumLoss --parms "disable"
+
+ mmaddcallback ctdb-enable-on-quorumReached \
+ --command /usr/bin/ctdb \
+ --event quorumReached --parms "enable"
+
* The CTDB tunable parameter EventScriptTimeoutCount has been renamed
to MonitorTimeoutCount
Configurations containing CTDB_SET_EventScriptTimeoutCount=<n> will
cause CTDB to fail at startup. Useful messages will be logged.
+* The commandline option "-n all" to CTDB tool has been removed.
+
+ The option was not uniformly implemented for all the commands.
+ Instead of command "ctdb ip -n all", use "ctdb ip all".
+
+* All CTDB current manual pages are now correctly installed
+
+
+REMOVED FEATURES
+================
+
+Public headers
+--------------
+
+Several public headers are not installed any longer. They are made for internal
+use only. More public headers will very likely be removed in future releases.
+
+The following headers are not installed any longer:
+dlinklist.h, gen_ndr/epmapper.h, gen_ndr/mgmt.h, gen_ndr/ndr_atsvc_c.h,
+gen_ndr/ndr_epmapper_c.h, gen_ndr/ndr_epmapper.h, gen_ndr/ndr_mgmt_c.h,
+gen_ndr/ndr_mgmt.h,gensec.h, ldap_errors.h, ldap_message.h, ldap_ndr.h,
+ldap-util.h, pytalloc.h, read_smb.h, registry.h, roles.h, samba_util.h,
+smb2_constants.h, smb2_create_blob.h, smb2.h, smb2_lease.h, smb2_signing.h,
+smb_cli.h, smb_cliraw.h, smb_common.h, smb_composite.h, smb_constants.h,
+smb_raw.h, smb_raw_interfaces.h, smb_raw_signing.h, smb_raw_trans2.h,
+smb_request.h, smb_seal.h, smb_signing.h, smb_unix_ext.h, smb_util.h,
+torture.h, tstream_smbXcli_np.h.
+
+vfs_smb_traffic_analyzer
+------------------------
+
+The SMB traffic analyzer VFS module has been removed, because it is not
+maintained any longer and not widely used.
+
+vfs_scannedonly
+---------------
+
+The scannedonly VFS module has been removed, because it is not maintained
+any longer.
+
+smb.conf changes
+----------------
+
+ Parameter Name Description Default
+ -------------- ----------- -------
+ aio max threads New 100
+ ldap page size Changed default 1000
+
+
KNOWN ISSUES
============
If you do report problems then please try to send high quality
feedback. If you don't provide vital information to help us track down
the problem then you will probably be ignored. All bug reports should
-be filed under the Samba 4.3 product in the project's Bugzilla
+be filed under the Samba 4.1 and newer product in the project's Bugzilla
database (https://bugzilla.samba.org/).