selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13 use File::Path 'remove_tree';
  14
  15 sub have_ads($) {
  16         my ($self) = @_;
  17         my $found_ads = 0;
  18         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  19         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  20
  21         while (<IN>) {
  22                 if (/WITH_ADS/) {
  23                        $found_ads = 1;
  24                 }
  25         }
  26         close IN;
  27
  28         # If we were not built with ADS support, pretend we were never even available
  29         print "smbd does not have ADS support\n" unless $found_ads;
  30         return $found_ads;
  31 }
  32
  33 # return smb.conf parameters applicable to @path, based on the underlying
  34 # filesystem type
  35 sub get_fs_specific_conf($$)
  36 {
  37         my ($self, $path) = @_;
  38         my $mods = "";
  39         my $stat_out = `stat --file-system $path` or return "";
  40
  41         if ($stat_out =~ m/Type:\s+btrfs/) {
  42                 $mods .= "streams_xattr btrfs";
  43         }
  44
  45         if ($mods) {
  46                 return "vfs objects = $mods";
  47         }
  48
  49         return undef;
  50 }
  51
  52 sub new($$) {
  53         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  54         my $self = { vars => {},
  55                      bindir => $bindir,
  56                      srcdir => $srcdir,
  57                      server_maxtime => $server_maxtime
  58         };
  59         bless $self;
  60         return $self;
  61 }
  62
  63 sub teardown_env($$)
  64 {
  65         my ($self, $envvars) = @_;
  66         my $count = 0;
  67
  68         # This should cause smbd to terminate gracefully
  69         close($envvars->{STDIN_PIPE});
  70
  71         my $smbdpid = $envvars->{SMBD_TL_PID};
  72         my $nmbdpid = $envvars->{NMBD_TL_PID};
  73         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  74
  75         # This should give it time to write out the gcov data
  76         until ($count > 20) {
  77             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  78             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  79             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  80             if ($smbdchild == -1
  81                 && $nmbdchild == -1
  82                 && $winbinddchild == -1) {
  83                 last;
  84             }
  85             sleep(1);
  86             $count++;
  87         }
  88
  89         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  90             return;
  91         }
  92
  93         $self->stop_sig_term($smbdpid);
  94         $self->stop_sig_term($nmbdpid);
  95         $self->stop_sig_term($winbinddpid);
  96
  97         $count = 0;
  98         until ($count > 10) {
  99             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
 100             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 101             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 102             if ($smbdchild == -1
 103                 && $nmbdchild == -1
 104                 && $winbinddchild == -1) {
 105                 last;
 106             }
 107             sleep(1);
 108             $count++;
 109         }
 110
 111         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 112             return;
 113         }
 114
 115         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 116         $self->stop_sig_kill($smbdpid);
 117         $self->stop_sig_kill($nmbdpid);
 118         $self->stop_sig_kill($winbinddpid);
 119
 120         return 0;
 121 }
 122
 123 sub getlog_env_app($$$)
 124 {
 125         my ($self, $envvars, $name) = @_;
 126
 127         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 128         my $out = $title;
 129
 130         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 131
 132         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 133         while (<LOG>) {
 134                 $out .= $_;
 135         }
 136         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 137         close(LOG);
 138
 139         return "" if $out eq $title;
 140
 141         return $out;
 142 }
 143
 144 sub getlog_env($$)
 145 {
 146         my ($self, $envvars) = @_;
 147         my $ret = "";
 148
 149         $ret .= $self->getlog_env_app($envvars, "SMBD");
 150         $ret .= $self->getlog_env_app($envvars, "NMBD");
 151         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 152
 153         return $ret;
 154 }
 155
 156 sub check_env($$)
 157 {
 158         my ($self, $envvars) = @_;
 159
 160         my $childpid = waitpid(-1, WNOHANG);
 161
 162         # TODO ...
 163         return 1;
 164 }
 165
 166 sub setup_env($$$)
 167 {
 168         my ($self, $envname, $path) = @_;
 169
 170         $ENV{ENVNAME} = $envname;
 171
 172         if (defined($self->{vars}->{$envname})) {
 173                 return $self->{vars}->{$envname};
 174         }
 175
 176         #
 177         # Avoid hitting system krb5.conf -
 178         # An env that needs Kerberos will reset this to the real
 179         # value.
 180         #
 181         $ENV{KRB5_CONFIG} = "$path/no_krb5.conf";
 182
 183         if ($envname eq "nt4_dc") {
 184                 return $self->setup_nt4_dc("$path/nt4_dc");
 185         } elsif ($envname eq "nt4_dc_schannel") {
 186                 return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
 187         } elsif ($envname eq "simpleserver") {
 188                 return $self->setup_simpleserver("$path/simpleserver");
 189         } elsif ($envname eq "fileserver") {
 190                 return $self->setup_fileserver("$path/fileserver");
 191         } elsif ($envname eq "maptoguest") {
 192                 return $self->setup_maptoguest("$path/maptoguest");
 193         } elsif ($envname eq "ktest") {
 194                 return $self->setup_ktest("$path/ktest");
 195         } elsif ($envname eq "nt4_member") {
 196                 if (not defined($self->{vars}->{nt4_dc})) {
 197                         if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
 198                                 return undef;
 199                         }
 200                 }
 201                 return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
 202         } else {
 203                 return "UNKNOWN";
 204         }
 205 }
 206
 207 sub setup_nt4_dc($$)
 208 {
 209         my ($self, $path) = @_;
 210
 211         print "PROVISIONING NT4 DC...";
 212
 213         my $nt4_dc_options = "
 214         domain master = yes
 215         domain logons = yes
 216         lanman auth = yes
 217         ntlm auth = yes
 218         raw NTLMv2 auth = yes
 219
 220         rpc_server:epmapper = external
 221         rpc_server:spoolss = external
 222         rpc_server:lsarpc = external
 223         rpc_server:samr = external
 224         rpc_server:netlogon = external
 225         rpc_server:register_embedded_np = yes
 226         rpc_server:FssagentRpc = external
 227
 228         rpc_daemon:epmd = fork
 229         rpc_daemon:spoolssd = fork
 230         rpc_daemon:lsasd = fork
 231         rpc_daemon:fssd = fork
 232         fss: sequence timeout = 1
 233 ";
 234
 235         my $vars = $self->provision($path, "SAMBA-TEST",
 236                                     "LOCALNT4DC2",
 237                                     "localntdc2pass",
 238                                     $nt4_dc_options);
 239
 240         $vars or return undef;
 241
 242         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 243                return undef;
 244         }
 245
 246         $vars->{DC_SERVER} = $vars->{SERVER};
 247         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 248         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 249         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 250         $vars->{DC_USERNAME} = $vars->{USERNAME};
 251         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 252
 253         $self->{vars}->{nt4_dc} = $vars;
 254
 255         return $vars;
 256 }
 257
 258 sub setup_nt4_dc_schannel($$)
 259 {
 260         my ($self, $path) = @_;
 261
 262         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 263
 264         my $pdc_options = "
 265         domain master = yes
 266         domain logons = yes
 267         lanman auth = yes
 268
 269         rpc_server:epmapper = external
 270         rpc_server:spoolss = external
 271         rpc_server:lsarpc = external
 272         rpc_server:samr = external
 273         rpc_server:netlogon = external
 274         rpc_server:register_embedded_np = yes
 275
 276         rpc_daemon:epmd = fork
 277         rpc_daemon:spoolssd = fork
 278         rpc_daemon:lsasd = fork
 279
 280         server schannel = yes
 281         # used to reproduce bug #12772
 282         server max protocol = SMB2_02
 283 ";
 284
 285         my $vars = $self->provision($path, "NT4SCHANNEL",
 286                                     "LOCALNT4DC9",
 287                                     "localntdc9pass",
 288                                     $pdc_options);
 289
 290         $vars or return undef;
 291
 292         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 293                return undef;
 294         }
 295
 296         $vars->{DC_SERVER} = $vars->{SERVER};
 297         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 298         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 299         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 300         $vars->{DC_USERNAME} = $vars->{USERNAME};
 301         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 302
 303         $self->{vars}->{nt4_dc_schannel} = $vars;
 304
 305         return $vars;
 306 }
 307
 308 sub setup_nt4_member($$$)
 309 {
 310         my ($self, $prefix, $nt4_dc_vars) = @_;
 311         my $count = 0;
 312         my $rc;
 313
 314         print "PROVISIONING MEMBER...";
 315
 316         my $require_mutexes = "dbwrap_tdb_require_mutexes:* = yes";
 317         $require_mutexes = "" if ($ENV{SELFTEST_DONT_REQUIRE_TDB_MUTEX_SUPPORT} eq "1");
 318
 319         my $member_options = "
 320         security = domain
 321         dbwrap_tdb_mutexes:* = yes
 322         ${require_mutexes}
 323 ";
 324         my $ret = $self->provision($prefix, $nt4_dc_vars->{DOMAIN},
 325                                    "LOCALNT4MEMBER3",
 326                                    "localnt4member3pass",
 327                                    $member_options);
 328
 329         $ret or return undef;
 330
 331         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 332         do {
 333                 print "Waiting for the LOGON SERVER registration ...\n";
 334                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 335                 if ($rc != 0) {
 336                         sleep(1);
 337                 }
 338                 $count++;
 339         } while ($rc != 0 && $count < 10);
 340         if ($count == 10) {
 341                 print "NMBD not reachable after 10 retries\n";
 342                 teardown_env($self, $ret);
 343                 return 0;
 344         }
 345
 346         my $net = Samba::bindir_path($self, "net");
 347         my $cmd = "";
 348         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 349         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 350         $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 351         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 352
 353         if (system($cmd) != 0) {
 354             warn("Join failed\n$cmd");
 355             return undef;
 356         }
 357
 358         my $cmd = "";
 359         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 360         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 361         $cmd .= "$net $ret->{CONFIGURATION} primarytrust dumpinfo | grep -q 'REDACTED SECRET VALUES'";
 362
 363         if (system($cmd) != 0) {
 364             warn("check failed\n$cmd");
 365             return undef;
 366         }
 367
 368         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 369                return undef;
 370         }
 371
 372         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 373         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 374         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 375         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 376         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 377         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 378
 379         return $ret;
 380 }
 381
 382 sub setup_admember($$$$)
 383 {
 384         my ($self, $prefix, $dcvars) = @_;
 385
 386         my $prefix_abs = abs_path($prefix);
 387         my @dirs = ();
 388
 389         # If we didn't build with ADS, pretend this env was never available
 390         if (not $self->have_ads()) {
 391                 return "UNKNOWN";
 392         }
 393
 394         print "PROVISIONING S3 AD MEMBER...";
 395
 396         mkdir($prefix_abs, 0777);
 397
 398         my $share_dir="$prefix_abs/share";
 399         push(@dirs, $share_dir);
 400
 401         my $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}";
 402         push(@dirs, $substitution_path);
 403
 404         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/U_alice";
 405         push(@dirs, $substitution_path);
 406
 407         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/U_alice/G_domain users";
 408         push(@dirs, $substitution_path);
 409
 410         # Using '/' as the winbind separator is a bad idea ...
 411         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}";
 412         push(@dirs, $substitution_path);
 413
 414         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice";
 415         push(@dirs, $substitution_path);
 416
 417         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice/g_$dcvars->{DOMAIN}";
 418         push(@dirs, $substitution_path);
 419
 420         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice/g_$dcvars->{DOMAIN}/domain users";
 421         push(@dirs, $substitution_path);
 422
 423         my $member_options = "
 424         security = ads
 425         workgroup = $dcvars->{DOMAIN}
 426         realm = $dcvars->{REALM}
 427         netbios aliases = foo bar
 428         template homedir = /home/%D/%G/%U
 429
 430 [sub_dug]
 431         path = $share_dir/D_%D/U_%U/G_%G
 432         writeable = yes
 433
 434 [sub_dug2]
 435         path = $share_dir/D_%D/u_%u/g_%g
 436         writeable = yes
 437
 438 ";
 439
 440         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 441                                    "LOCALADMEMBER",
 442                                    "loCalMemberPass",
 443                                    $member_options,
 444                                    $dcvars->{SERVER_IP},
 445                                    $dcvars->{SERVER_IPV6});
 446
 447         $ret or return undef;
 448
 449         mkdir($_, 0777) foreach(@dirs);
 450
 451         close(USERMAP);
 452         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 453         $ret->{REALM} = $dcvars->{REALM};
 454
 455         my $ctx;
 456         $ctx = {};
 457         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 458         $ctx->{domain} = $dcvars->{DOMAIN};
 459         $ctx->{realm} = $dcvars->{REALM};
 460         $ctx->{dnsname} = lc($dcvars->{REALM});
 461         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 462         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 463         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 464         Samba::mk_krb5_conf($ctx, "");
 465
 466         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 467
 468         my $net = Samba::bindir_path($self, "net");
 469         my $cmd = "";
 470         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 471         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 472                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 473         } else {
 474                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 475         }
 476         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 477         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 478         $cmd .= "$net join $ret->{CONFIGURATION}";
 479         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 480
 481         if (system($cmd) != 0) {
 482             warn("Join failed\n$cmd");
 483             return undef;
 484         }
 485
 486         # We need world access to this share, as otherwise the domain
 487         # administrator from the AD domain provided by Samba4 can't
 488         # access the share for tests.
 489         chmod 0777, "$prefix/share";
 490
 491         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 492                 return undef;
 493         }
 494
 495         $ret->{DC_SERVER} = $dcvars->{SERVER};
 496         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 497         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 498         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 499         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 500         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 501
 502         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 503         $ret->{target} = $self;
 504
 505         return $ret;
 506 }
 507
 508 sub setup_admember_rfc2307($$$$)
 509 {
 510         my ($self, $prefix, $dcvars) = @_;
 511
 512         # If we didn't build with ADS, pretend this env was never available
 513         if (not $self->have_ads()) {
 514                 return "UNKNOWN";
 515         }
 516
 517         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 518
 519         my $member_options = "
 520         security = ads
 521         workgroup = $dcvars->{DOMAIN}
 522         realm = $dcvars->{REALM}
 523         idmap cache time = 0
 524         idmap negative cache time = 0
 525         idmap config * : backend = autorid
 526         idmap config * : range = 1000000-1999999
 527         idmap config * : rangesize = 100000
 528         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 529         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 530         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 531         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 532         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 533
 534         password server = $dcvars->{SERVER}
 535 ";
 536
 537         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 538                                    "RFC2307MEMBER",
 539                                    "loCalMemberPass",
 540                                    $member_options,
 541                                    $dcvars->{SERVER_IP},
 542                                    $dcvars->{SERVER_IPV6});
 543
 544         $ret or return undef;
 545
 546         close(USERMAP);
 547         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 548         $ret->{REALM} = $dcvars->{REALM};
 549
 550         my $ctx;
 551         my $prefix_abs = abs_path($prefix);
 552         $ctx = {};
 553         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 554         $ctx->{domain} = $dcvars->{DOMAIN};
 555         $ctx->{realm} = $dcvars->{REALM};
 556         $ctx->{dnsname} = lc($dcvars->{REALM});
 557         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 558         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 559         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 560         Samba::mk_krb5_conf($ctx, "");
 561
 562         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 563
 564         my $net = Samba::bindir_path($self, "net");
 565         my $cmd = "";
 566         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 567         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 568                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 569         } else {
 570                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 571         }
 572         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 573         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 574         $cmd .= "$net join $ret->{CONFIGURATION}";
 575         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 576
 577         if (system($cmd) != 0) {
 578             warn("Join failed\n$cmd");
 579             return undef;
 580         }
 581
 582         # We need world access to this share, as otherwise the domain
 583         # administrator from the AD domain provided by Samba4 can't
 584         # access the share for tests.
 585         chmod 0777, "$prefix/share";
 586
 587         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 588                 return undef;
 589         }
 590
 591         $ret->{DC_SERVER} = $dcvars->{SERVER};
 592         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 593         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 594         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 595         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 596         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 597
 598         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 599         $ret->{target} = $self;
 600
 601         return $ret;
 602 }
 603
 604 sub setup_ad_member_idmap_rid($$$$)
 605 {
 606         my ($self, $prefix, $dcvars) = @_;
 607
 608         # If we didn't build with ADS, pretend this env was never available
 609         if (not $self->have_ads()) {
 610                 return "UNKNOWN";
 611         }
 612
 613         print "PROVISIONING S3 AD MEMBER WITH idmap_rid config...";
 614
 615         my $member_options = "
 616         security = ads
 617         workgroup = $dcvars->{DOMAIN}
 618         realm = $dcvars->{REALM}
 619         idmap config * : backend = tdb
 620         idmap config * : range = 1000000-1999999
 621         idmap config $dcvars->{DOMAIN} : backend = rid
 622         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 623 ";
 624
 625         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 626                                    "IDMAPRIDMEMBER",
 627                                    "loCalMemberPass",
 628                                    $member_options,
 629                                    $dcvars->{SERVER_IP},
 630                                    $dcvars->{SERVER_IPV6});
 631
 632         $ret or return undef;
 633
 634         close(USERMAP);
 635         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 636         $ret->{REALM} = $dcvars->{REALM};
 637
 638         my $ctx;
 639         my $prefix_abs = abs_path($prefix);
 640         $ctx = {};
 641         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 642         $ctx->{domain} = $dcvars->{DOMAIN};
 643         $ctx->{realm} = $dcvars->{REALM};
 644         $ctx->{dnsname} = lc($dcvars->{REALM});
 645         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 646         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 647         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 648         Samba::mk_krb5_conf($ctx, "");
 649
 650         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 651
 652         my $net = Samba::bindir_path($self, "net");
 653         my $cmd = "";
 654         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 655         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 656                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 657         } else {
 658                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 659         }
 660         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 661         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 662         $cmd .= "$net join $ret->{CONFIGURATION}";
 663         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 664
 665         if (system($cmd) != 0) {
 666             warn("Join failed\n$cmd");
 667             return undef;
 668         }
 669
 670         # We need world access to this share, as otherwise the domain
 671         # administrator from the AD domain provided by Samba4 can't
 672         # access the share for tests.
 673         chmod 0777, "$prefix/share";
 674
 675         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 676                 return undef;
 677         }
 678
 679         $ret->{DC_SERVER} = $dcvars->{SERVER};
 680         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 681         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 682         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 683         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 684         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 685
 686         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 687         $ret->{target} = $self;
 688
 689         return $ret;
 690 }
 691
 692 sub setup_ad_member_idmap_ad($$$$)
 693 {
 694         my ($self, $prefix, $dcvars) = @_;
 695
 696         # If we didn't build with ADS, pretend this env was never available
 697         if (not $self->have_ads()) {
 698                 return "UNKNOWN";
 699         }
 700
 701         print "PROVISIONING S3 AD MEMBER WITH idmap_ad config...";
 702
 703         my $member_options = "
 704         security = ads
 705         workgroup = $dcvars->{DOMAIN}
 706         realm = $dcvars->{REALM}
 707         password server = $dcvars->{SERVER}
 708         idmap config * : backend = tdb
 709         idmap config * : range = 1000000-1999999
 710         idmap config $dcvars->{DOMAIN} : backend = ad
 711         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 712 ";
 713
 714         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 715                                    "IDMAPADMEMBER",
 716                                    "loCalMemberPass",
 717                                    $member_options,
 718                                    $dcvars->{SERVER_IP},
 719                                    $dcvars->{SERVER_IPV6});
 720
 721         $ret or return undef;
 722
 723         close(USERMAP);
 724         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 725         $ret->{REALM} = $dcvars->{REALM};
 726
 727         my $ctx;
 728         my $prefix_abs = abs_path($prefix);
 729         $ctx = {};
 730         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 731         $ctx->{domain} = $dcvars->{DOMAIN};
 732         $ctx->{realm} = $dcvars->{REALM};
 733         $ctx->{dnsname} = lc($dcvars->{REALM});
 734         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 735         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 736         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 737         Samba::mk_krb5_conf($ctx, "");
 738
 739         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 740
 741         my $net = Samba::bindir_path($self, "net");
 742         my $cmd = "";
 743         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 744         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 745                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 746         } else {
 747                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 748         }
 749         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 750         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 751         $cmd .= "$net join $ret->{CONFIGURATION}";
 752         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 753
 754         if (system($cmd) != 0) {
 755             warn("Join failed\n$cmd");
 756             return undef;
 757         }
 758
 759         # We need world access to this share, as otherwise the domain
 760         # administrator from the AD domain provided by Samba4 can't
 761         # access the share for tests.
 762         chmod 0777, "$prefix/share";
 763
 764         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 765                 return undef;
 766         }
 767
 768         $ret->{DC_SERVER} = $dcvars->{SERVER};
 769         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 770         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 771         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 772         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 773         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 774
 775         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 776         $ret->{target} = $self;
 777
 778         return $ret;
 779 }
 780
 781 sub setup_simpleserver($$)
 782 {
 783         my ($self, $path) = @_;
 784
 785         print "PROVISIONING simple server...";
 786
 787         my $prefix_abs = abs_path($path);
 788
 789         my $simpleserver_options = "
 790         lanman auth = yes
 791         ntlm auth = yes
 792         vfs objects = xattr_tdb streams_depot time_audit full_audit
 793         change notify = no
 794         smb encrypt = off
 795
 796         full_audit:syslog = no
 797         full_audit:success = none
 798         full_audit:failure = none
 799
 800 [vfs_aio_fork]
 801         path = $prefix_abs/share
 802         vfs objects = aio_fork
 803         read only = no
 804         vfs_aio_fork:erratic_testing_mode=yes
 805
 806 [dosmode]
 807         path = $prefix_abs/share
 808         vfs objects =
 809         store dos attributes = yes
 810         hide files = /hidefile/
 811         hide dot files = yes
 812
 813 [enc_desired]
 814         path = $prefix_abs/share
 815         vfs objects =
 816         smb encrypt = desired
 817 ";
 818
 819         my $vars = $self->provision($path, "WORKGROUP",
 820                                     "LOCALSHARE4",
 821                                     "local4pass",
 822                                     $simpleserver_options);
 823
 824         $vars or return undef;
 825
 826         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 827                return undef;
 828         }
 829
 830         $self->{vars}->{simpleserver} = $vars;
 831
 832         return $vars;
 833 }
 834
 835 sub setup_fileserver($$)
 836 {
 837         my ($self, $path) = @_;
 838         my $prefix_abs = abs_path($path);
 839         my $srcdir_abs = abs_path($self->{srcdir});
 840
 841         print "PROVISIONING file server ...\n";
 842
 843         my @dirs = ();
 844
 845         mkdir($prefix_abs, 0777);
 846
 847         my $usershare_dir="$prefix_abs/lib/usershare";
 848
 849         mkdir("$prefix_abs/lib", 0755);
 850         remove_tree($usershare_dir);
 851         mkdir($usershare_dir, 01770);
 852
 853         my $share_dir="$prefix_abs/share";
 854
 855         # Create share directory structure
 856         my $lower_case_share_dir="$share_dir/lower-case";
 857         push(@dirs, $lower_case_share_dir);
 858
 859         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 860         push(@dirs, $lower_case_share_dir_30000);
 861
 862         my $dfree_share_dir="$share_dir/dfree";
 863         push(@dirs, $dfree_share_dir);
 864         push(@dirs, "$dfree_share_dir/subdir1");
 865         push(@dirs, "$dfree_share_dir/subdir2");
 866         push(@dirs, "$dfree_share_dir/subdir3");
 867
 868         my $valid_users_sharedir="$share_dir/valid_users";
 869         push(@dirs,$valid_users_sharedir);
 870
 871         my $offline_sharedir="$share_dir/offline";
 872         push(@dirs,$offline_sharedir);
 873
 874         my $force_user_valid_users_dir = "$share_dir/force_user_valid_users";
 875         push(@dirs, $force_user_valid_users_dir);
 876
 877         my $smbget_sharedir="$share_dir/smbget";
 878         push(@dirs,$smbget_sharedir);
 879
 880         my $tarmode_sharedir="$share_dir/tarmode";
 881         push(@dirs,$tarmode_sharedir);
 882
 883         my $usershare_sharedir="$share_dir/usershares";
 884         push(@dirs,$usershare_sharedir);
 885
 886         my $fileserver_options = "
 887         usershare path = $usershare_dir
 888         usershare max shares = 10
 889         usershare allow guests = yes
 890         usershare prefix allow list = $usershare_sharedir
 891
 892 [lowercase]
 893         path = $lower_case_share_dir
 894         comment = smb username is [%U]
 895         case sensitive = True
 896         default case = lower
 897         preserve case = no
 898         short preserve case = no
 899 [lowercase-30000]
 900         path = $lower_case_share_dir_30000
 901         comment = smb username is [%U]
 902         case sensitive = True
 903         default case = lower
 904         preserve case = no
 905         short preserve case = no
 906 [dfree]
 907         path = $dfree_share_dir
 908         comment = smb username is [%U]
 909         dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
 910 [valid-users-access]
 911         path = $valid_users_sharedir
 912         valid users = +userdup
 913 [offline]
 914         path = $offline_sharedir
 915         vfs objects = offline
 916
 917 # BUG: https://bugzilla.samba.org/show_bug.cgi?id=9878
 918 # RH BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1077651
 919 [force_user_valid_users]
 920         path = $force_user_valid_users_dir
 921         comment = force user with valid users combination test share
 922         valid users = +force_user
 923         force user = force_user
 924         force group = everyone
 925         write list = force_user
 926
 927 [smbget]
 928         path = $smbget_sharedir
 929         comment = smb username is [%U]
 930         guest ok = yes
 931 [ign_sysacls]
 932         path = $share_dir
 933         comment = ignore system acls
 934         acl_xattr:ignore system acls = yes
 935 [inherit_owner]
 936         path = $share_dir
 937         comment = inherit owner
 938         inherit owner = yes
 939 [inherit_owner_u]
 940         path = $share_dir
 941         comment = inherit only unix owner
 942         inherit owner = unix only
 943         acl_xattr:ignore system acls = yes
 944 ";
 945
 946         my $vars = $self->provision($path, "WORKGROUP",
 947                                     "FILESERVER",
 948                                     "fileserver",
 949                                     $fileserver_options,
 950                                     undef,
 951                                     undef,
 952                                     1);
 953
 954         $vars or return undef;
 955
 956         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 957                return undef;
 958         }
 959
 960         $self->{vars}->{fileserver} = $vars;
 961
 962         mkdir($_, 0777) foreach(@dirs);
 963
 964         ## Create case sensitive lower case share dir
 965         foreach my $file ('a'..'z') {
 966                 my $full_path = $lower_case_share_dir . '/' . $file;
 967                 open my $fh, '>', $full_path;
 968                 # Add some content to file
 969                 print $fh $full_path;
 970                 close $fh;
 971         }
 972
 973         for (my $file = 1; $file < 51; ++$file) {
 974                 my $full_path = $lower_case_share_dir . '/' . $file;
 975                 open my $fh, '>', $full_path;
 976                 # Add some content to file
 977                 print $fh $full_path;
 978                 close $fh;
 979         }
 980
 981         # Create content for 30000 share
 982         foreach my $file ('a'..'z') {
 983                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 984                 open my $fh, '>', $full_path;
 985                 # Add some content to file
 986                 print $fh $full_path;
 987                 close $fh;
 988         }
 989
 990         for (my $file = 1; $file < 30001; ++$file) {
 991                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 992                 open my $fh, '>', $full_path;
 993                 # Add some content to file
 994                 print $fh $full_path;
 995                 close $fh;
 996         }
 997
 998         ##
 999         ## create a listable file in valid_users_share
1000         ##
1001         my $valid_users_target = "$valid_users_sharedir/foo";
1002         unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
1003                 warn("Unable to open $valid_users_target");
1004                 return undef;
1005         }
1006         close(VALID_USERS_TARGET);
1007         chmod 0644, $valid_users_target;
1008
1009         return $vars;
1010 }
1011
1012 sub setup_ktest($$$)
1013 {
1014         my ($self, $prefix) = @_;
1015
1016         # If we didn't build with ADS, pretend this env was never available
1017         if (not $self->have_ads()) {
1018                 return "UNKNOWN";
1019         }
1020
1021         print "PROVISIONING server with security=ads...";
1022
1023         my $ktest_options = "
1024         workgroup = KTEST
1025         realm = ktest.samba.example.com
1026         security = ads
1027         username map = $prefix/lib/username.map
1028         server signing = required
1029         server min protocol = SMB3_00
1030         client max protocol = SMB3
1031
1032         # This disables NTLM auth against the local SAM, which
1033         # we use can then test this setting by.
1034         ntlm auth = disabled
1035 ";
1036
1037         my $ret = $self->provision($prefix, "KTEST",
1038                                    "LOCALKTEST6",
1039                                    "localktest6pass",
1040                                    $ktest_options);
1041
1042         $ret or return undef;
1043
1044         my $ctx;
1045         my $prefix_abs = abs_path($prefix);
1046         $ctx = {};
1047         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
1048         $ctx->{domain} = "KTEST";
1049         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
1050         $ctx->{dnsname} = lc($ctx->{realm});
1051         $ctx->{kdc_ipv4} = "0.0.0.0";
1052         $ctx->{kdc_ipv6} = "::";
1053         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
1054         Samba::mk_krb5_conf($ctx, "");
1055
1056         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
1057
1058         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
1059         print USERMAP "
1060 $ret->{USERNAME} = KTEST\\Administrator
1061 ";
1062         close(USERMAP);
1063
1064 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
1065 #Samba4 DC with the same parameters as are being used here.  The
1066 #domain SID is S-1-5-21-1071277805-689288055-3486227160
1067
1068         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
1069         chmod 0600, "$prefix/private/secrets.tdb";
1070
1071 #Make sure there's no old ntdb file.
1072         system("rm -f $prefix/private/secrets.ntdb");
1073
1074 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
1075 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
1076 #
1077 #and having in krb5.conf:
1078 # ticket_lifetime = 799718400
1079 # renew_lifetime = 799718400
1080 #
1081 # The commands for the -2 keytab where were:
1082 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
1083 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
1084 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
1085 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
1086 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
1087 #
1088 # and then for the -3 keytab, I did
1089 #
1090 # net changetrustpw; kdestroy and the same again.
1091 #
1092 # This creates a credential cache with a very long lifetime (2036 at
1093 # at 2011-04), and shows that running 'net changetrustpw' does not
1094 # break existing logins (for the secrets.tdb method at least).
1095 #
1096
1097         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
1098
1099         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
1100         chmod 0600, "$prefix/krb5_ccache-2";
1101
1102         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
1103         chmod 0600, "$prefix/krb5_ccache-3";
1104
1105         # We need world access to this share, as otherwise the domain
1106         # administrator from the AD domain provided by ktest can't
1107         # access the share for tests.
1108         chmod 0777, "$prefix/share";
1109
1110         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
1111                return undef;
1112         }
1113         return $ret;
1114 }
1115
1116 sub setup_maptoguest($$)
1117 {
1118         my ($self, $path) = @_;
1119
1120         print "PROVISIONING maptoguest...";
1121
1122         my $options = "
1123 map to guest = bad user
1124 ntlm auth = yes
1125 ";
1126
1127         my $vars = $self->provision($path, "WORKGROUP",
1128                                     "maptoguest",
1129                                     "maptoguestpass",
1130                                     $options);
1131
1132         $vars or return undef;
1133
1134         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
1135                return undef;
1136         }
1137
1138         $self->{vars}->{s3maptoguest} = $vars;
1139
1140         return $vars;
1141 }
1142
1143 sub stop_sig_term($$) {
1144         my ($self, $pid) = @_;
1145         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
1146 }
1147
1148 sub stop_sig_kill($$) {
1149         my ($self, $pid) = @_;
1150         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
1151 }
1152
1153 sub write_pid($$$)
1154 {
1155         my ($env_vars, $app, $pid) = @_;
1156
1157         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
1158         print PID $pid;
1159         close(PID);
1160 }
1161
1162 sub read_pid($$)
1163 {
1164         my ($env_vars, $app) = @_;
1165
1166         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
1167         my $pid = <PID>;
1168         close(PID);
1169         return $pid;
1170 }
1171
1172 sub check_or_start($$$$$) {
1173         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
1174
1175         # use a pipe for stdin in the child processes. This allows
1176         # those processes to monitor the pipe for EOF to ensure they
1177         # exit when the test script exits
1178         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
1179
1180         unlink($env_vars->{NMBD_TEST_LOG});
1181         print "STARTING NMBD...";
1182         my $pid = fork();
1183         if ($pid == 0) {
1184                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
1185                 open STDERR, '>&STDOUT';
1186
1187                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1188
1189                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1190                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.nmbd";
1191                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1192                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1193
1194                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1195                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1196                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1197                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1198                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1199                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1200                 $ENV{UID_WRAPPER_ROOT} = "1";
1201
1202                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
1203
1204                 if ($nmbd ne "yes") {
1205                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1206                                 my $signame = shift;
1207                                 print("Skip nmbd received signal $signame");
1208                                 exit 0;
1209                         };
1210                         sleep($self->{server_maxtime});
1211                         exit 0;
1212                 }
1213
1214                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
1215                 my @optargs = ("-d0");
1216                 if (defined($ENV{NMBD_OPTIONS})) {
1217                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
1218                 }
1219                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1220                 if(defined($ENV{NMBD_VALGRIND})) {
1221                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
1222                 }
1223                 my @args = ("-F", "--no-process-group",
1224                             "-s", $env_vars->{SERVERCONFFILE},
1225                             "-l", $env_vars->{LOGDIR});
1226                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
1227                         push(@args, "--log-stdout");
1228                 }
1229
1230                 close($env_vars->{STDIN_PIPE});
1231                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1232
1233                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1234                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1235         }
1236         $env_vars->{NMBD_TL_PID} = $pid;
1237         write_pid($env_vars, "nmbd", $pid);
1238         print "DONE\n";
1239
1240         unlink($env_vars->{WINBINDD_TEST_LOG});
1241         print "STARTING WINBINDD...";
1242         $pid = fork();
1243         if ($pid == 0) {
1244                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
1245                 open STDERR, '>&STDOUT';
1246
1247                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1248
1249                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1250                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.winbindd";
1251                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1252                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1253
1254                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1255                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1256                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1257                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1258                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1259                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1260                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1261                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1262                 } else {
1263                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1264                 }
1265                 $ENV{UID_WRAPPER_ROOT} = "1";
1266
1267                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
1268
1269                 if ($winbindd ne "yes") {
1270                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1271                                 my $signame = shift;
1272                                 print("Skip winbindd received signal $signame");
1273                                 exit 0;
1274                         };
1275                         sleep($self->{server_maxtime});
1276                         exit 0;
1277                 }
1278
1279                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
1280                 my @optargs = ("-d0");
1281                 if (defined($ENV{WINBINDD_OPTIONS})) {
1282                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
1283                 }
1284                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1285                 if(defined($ENV{WINBINDD_VALGRIND})) {
1286                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
1287                 }
1288                 my @args = ("-F", "--no-process-group",
1289                             "-s", $env_vars->{SERVERCONFFILE},
1290                             "-l", $env_vars->{LOGDIR});
1291                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
1292                         push(@args, "--stdout");
1293                 }
1294
1295                 close($env_vars->{STDIN_PIPE});
1296                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1297
1298                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1299                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1300         }
1301         $env_vars->{WINBINDD_TL_PID} = $pid;
1302         write_pid($env_vars, "winbindd", $pid);
1303         print "DONE\n";
1304
1305         unlink($env_vars->{SMBD_TEST_LOG});
1306         print "STARTING SMBD...";
1307         $pid = fork();
1308         if ($pid == 0) {
1309                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
1310                 open STDERR, '>&STDOUT';
1311
1312                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1313
1314                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1315                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.smbd";
1316                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1317                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1318
1319                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1320                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1321                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1322                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1323                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1324                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1325                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1326                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1327                 } else {
1328                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1329                 }
1330                 $ENV{UID_WRAPPER_ROOT} = "1";
1331
1332                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
1333
1334                 if ($smbd ne "yes") {
1335                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1336                                 my $signame = shift;
1337                                 print("Skip smbd received signal $signame");
1338                                 exit 0;
1339                         };
1340                         sleep($self->{server_maxtime});
1341                         exit 0;
1342                 }
1343
1344                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
1345                 my @optargs = ("-d0");
1346                 if (defined($ENV{SMBD_OPTIONS})) {
1347                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
1348                 }
1349                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1350                 if(defined($ENV{SMBD_VALGRIND})) {
1351                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
1352                 }
1353                 my @args = ("-F", "--no-process-group",
1354                             "-s", $env_vars->{SERVERCONFFILE},
1355                             "-l", $env_vars->{LOGDIR});
1356                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
1357                         push(@args, "--log-stdout");
1358                 }
1359
1360                 close($env_vars->{STDIN_PIPE});
1361                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1362
1363                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1364                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1365         }
1366         $env_vars->{SMBD_TL_PID} = $pid;
1367         write_pid($env_vars, "smbd", $pid);
1368         print "DONE\n";
1369
1370         close(STDIN_READER);
1371
1372         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1373 }
1374
1375 sub createuser($$$$)
1376 {
1377         my ($self, $username, $password, $conffile) = @_;
1378         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $username > /dev/null";
1379         unless (open(PWD, "|$cmd")) {
1380             warn("Unable to set password for $username account\n$cmd");
1381             return undef;
1382         }
1383         print PWD "$password\n$password\n";
1384         unless (close(PWD)) {
1385             warn("Unable to set password for $username account\n$cmd");
1386             return undef;
1387         }
1388 }
1389
1390 sub provision($$$$$$$$$)
1391 {
1392         my ($self, $prefix, $domain, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1393
1394         ##
1395         ## setup the various environment variables we need
1396         ##
1397
1398         my $swiface = Samba::get_interface($server);
1399         my %ret = ();
1400         my $server_ip = "127.0.0.$swiface";
1401         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1402
1403         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1404         chomp $unix_name;
1405         my $unix_uid = $>;
1406         my $unix_gids_str = $);
1407         my @unix_gids = split(" ", $unix_gids_str);
1408
1409         my $prefix_abs = abs_path($prefix);
1410         my $bindir_abs = abs_path($self->{bindir});
1411
1412         my @dirs = ();
1413
1414         my $shrdir="$prefix_abs/share";
1415         push(@dirs,$shrdir);
1416
1417         my $libdir="$prefix_abs/lib";
1418         push(@dirs,$libdir);
1419
1420         my $piddir="$prefix_abs/pid";
1421         push(@dirs,$piddir);
1422
1423         my $privatedir="$prefix_abs/private";
1424         push(@dirs,$privatedir);
1425
1426         my $lockdir="$prefix_abs/lockdir";
1427         push(@dirs,$lockdir);
1428
1429         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1430         push(@dirs,$eventlogdir);
1431
1432         my $logdir="$prefix_abs/logs";
1433         push(@dirs,$logdir);
1434
1435         my $driver32dir="$shrdir/W32X86";
1436         push(@dirs,$driver32dir);
1437
1438         my $driver64dir="$shrdir/x64";
1439         push(@dirs,$driver64dir);
1440
1441         my $driver40dir="$shrdir/WIN40";
1442         push(@dirs,$driver40dir);
1443
1444         my $ro_shrdir="$shrdir/root-tmp";
1445         push(@dirs,$ro_shrdir);
1446
1447         my $msdfs_shrdir="$shrdir/msdfsshare";
1448         push(@dirs,$msdfs_shrdir);
1449
1450         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1451         push(@dirs,$msdfs_deeppath);
1452
1453         my $badnames_shrdir="$shrdir/badnames";
1454         push(@dirs,$badnames_shrdir);
1455
1456         my $lease1_shrdir="$shrdir/SMB2_10";
1457         push(@dirs,$lease1_shrdir);
1458
1459         my $lease2_shrdir="$shrdir/SMB3_00";
1460         push(@dirs,$lease2_shrdir);
1461
1462         my $manglenames_shrdir="$shrdir/manglenames";
1463         push(@dirs,$manglenames_shrdir);
1464
1465         my $widelinks_shrdir="$shrdir/widelinks";
1466         push(@dirs,$widelinks_shrdir);
1467
1468         my $widelinks_linkdir="$shrdir/widelinks_foo";
1469         push(@dirs,$widelinks_linkdir);
1470
1471         my $shadow_tstdir="$shrdir/shadow";
1472         push(@dirs,$shadow_tstdir);
1473         my $shadow_mntdir="$shadow_tstdir/mount";
1474         push(@dirs,$shadow_mntdir);
1475         my $shadow_basedir="$shadow_mntdir/base";
1476         push(@dirs,$shadow_basedir);
1477         my $shadow_shrdir="$shadow_basedir/share";
1478         push(@dirs,$shadow_shrdir);
1479
1480         my $nosymlinks_shrdir="$shrdir/nosymlinks";
1481         push(@dirs,$nosymlinks_shrdir);
1482
1483         my $local_symlinks_shrdir="$shrdir/local_symlinks";
1484         push(@dirs,$local_symlinks_shrdir);
1485
1486         # this gets autocreated by winbindd
1487         my $wbsockdir="$prefix_abs/winbindd";
1488
1489         my $nmbdsockdir="$prefix_abs/nmbd";
1490         unlink($nmbdsockdir);
1491
1492         ##
1493         ## create the test directory layout
1494         ##
1495         die ("prefix_abs = ''") if $prefix_abs eq "";
1496         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1497
1498         mkdir($prefix_abs, 0777);
1499         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1500         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1501             system("rm -rf $prefix_abs/*");
1502         }
1503         mkdir($_, 0777) foreach(@dirs);
1504
1505         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1506
1507         ##
1508         ## lockdir and piddir must be 0755
1509         ##
1510         chmod 0755, $lockdir;
1511         chmod 0755, $piddir;
1512
1513
1514         ##
1515         ## create ro and msdfs share layout
1516         ##
1517
1518         chmod 0755, $ro_shrdir;
1519         my $unreadable_file = "$ro_shrdir/unreadable_file";
1520         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1521                 warn("Unable to open $unreadable_file");
1522                 return undef;
1523         }
1524         close(UNREADABLE_FILE);
1525         chmod 0600, $unreadable_file;
1526
1527         my $msdfs_target = "$ro_shrdir/msdfs-target";
1528         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1529                 warn("Unable to open $msdfs_target");
1530                 return undef;
1531         }
1532         close(MSDFS_TARGET);
1533         chmod 0666, $msdfs_target;
1534         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1535                 "$msdfs_shrdir/msdfs-src1";
1536         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1537
1538         ##
1539         ## create bad names in $badnames_shrdir
1540         ##
1541         ## (An invalid name, would be mangled to 8.3).
1542         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1543         unless (open(BADNAME_TARGET, ">$badname_target")) {
1544                 warn("Unable to open $badname_target");
1545                 return undef;
1546         }
1547         close(BADNAME_TARGET);
1548         chmod 0666, $badname_target;
1549
1550         ## (A bad name, would not be mangled to 8.3).
1551         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1552         unless (open(BADNAME_TARGET, ">$badname_target")) {
1553                 warn("Unable to open $badname_target");
1554                 return undef;
1555         }
1556         close(BADNAME_TARGET);
1557         chmod 0666, $badname_target;
1558
1559         ## (A bad good name).
1560         my $badname_target = "$badnames_shrdir/blank.txt";
1561         unless (open(BADNAME_TARGET, ">$badname_target")) {
1562                 warn("Unable to open $badname_target");
1563                 return undef;
1564         }
1565         close(BADNAME_TARGET);
1566         chmod 0666, $badname_target;
1567
1568         ##
1569         ## create mangleable directory names in $manglenames_shrdir
1570         ##
1571         my $manglename_target = "$manglenames_shrdir/foo:bar";
1572         mkdir($manglename_target, 0777);
1573
1574         ##
1575         ## create symlinks for widelinks tests.
1576         ##
1577         my $widelinks_target = "$widelinks_linkdir/target";
1578         unless (open(WIDELINKS_TARGET, ">$widelinks_target")) {
1579                 warn("Unable to open $widelinks_target");
1580                 return undef;
1581         }
1582         close(WIDELINKS_TARGET);
1583         chmod 0666, $widelinks_target;
1584         ##
1585         ## This link should get ACCESS_DENIED
1586         ##
1587         symlink "$widelinks_target", "$widelinks_shrdir/source";
1588         ##
1589         ## This link should be allowed
1590         ##
1591         symlink "$widelinks_shrdir", "$widelinks_shrdir/dot";
1592
1593         my $conffile="$libdir/server.conf";
1594         my $dfqconffile="$libdir/dfq.conf";
1595
1596         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
1597         my $nss_wrapper_passwd = "$privatedir/passwd";
1598         my $nss_wrapper_group = "$privatedir/group";
1599         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1600         my $resolv_conf = "$privatedir/resolv.conf";
1601         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1602
1603         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1604
1605         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1606
1607         my @eventlog_list = ("dns server", "application");
1608
1609         ##
1610         ## calculate uids and gids
1611         ##
1612
1613         my ($max_uid, $max_gid);
1614         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
1615         my ($uid_pdbtest_wkn);
1616         my ($uid_smbget);
1617         my ($uid_force_user);
1618         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1619         my ($gid_userdup, $gid_everyone);
1620         my ($gid_force_user);
1621         my ($uid_user1);
1622         my ($uid_user2);
1623
1624         if ($unix_uid < 0xffff - 10) {
1625                 $max_uid = 0xffff;
1626         } else {
1627                 $max_uid = $unix_uid;
1628         }
1629
1630         $uid_root = $max_uid - 1;
1631         $uid_nobody = $max_uid - 2;
1632         $uid_pdbtest = $max_uid - 3;
1633         $uid_pdbtest2 = $max_uid - 4;
1634         $uid_userdup = $max_uid - 5;
1635         $uid_pdbtest_wkn = $max_uid - 6;
1636         $uid_force_user = $max_uid - 7;
1637         $uid_smbget = $max_uid - 8;
1638         $uid_user1 = $max_uid - 9;
1639         $uid_user2 = $max_uid - 10;
1640
1641         if ($unix_gids[0] < 0xffff - 8) {
1642                 $max_gid = 0xffff;
1643         } else {
1644                 $max_gid = $unix_gids[0];
1645         }
1646
1647         $gid_nobody = $max_gid - 1;
1648         $gid_nogroup = $max_gid - 2;
1649         $gid_root = $max_gid - 3;
1650         $gid_domusers = $max_gid - 4;
1651         $gid_domadmins = $max_gid - 5;
1652         $gid_userdup = $max_gid - 6;
1653         $gid_everyone = $max_gid - 7;
1654         $gid_force_user = $max_gid - 8;
1655
1656         ##
1657         ## create conffile
1658         ##
1659
1660         unless (open(CONF, ">$conffile")) {
1661                 warn("Unable to open $conffile");
1662                 return undef;
1663         }
1664         print CONF "
1665 [global]
1666         netbios name = $server
1667         interfaces = $server_ip/8 $server_ipv6/64
1668         bind interfaces only = yes
1669         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1670         smbd:suicide mode = yes
1671
1672         workgroup = $domain
1673
1674         private dir = $privatedir
1675         pid directory = $piddir
1676         lock directory = $lockdir
1677         log file = $logdir/log.\%m
1678         log level = 1
1679         debug pid = yes
1680         max log size = 0
1681
1682         state directory = $lockdir
1683         cache directory = $lockdir
1684
1685         passdb backend = tdbsam
1686
1687         time server = yes
1688
1689         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1690         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1691         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1692         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1693         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1694         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1695         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1696
1697         addprinter command =            $mod_printer_pl -a -s $conffile --
1698         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1699
1700         eventlog list = application \"dns server\"
1701
1702         kernel oplocks = no
1703         kernel change notify = no
1704
1705         logging = file
1706         printing = bsd
1707         printcap name = /dev/null
1708
1709         winbindd socket directory = $wbsockdir
1710         nmbd:socket dir = $nmbdsockdir
1711         idmap config * : range = 100000-200000
1712         winbind enum users = yes
1713         winbind enum groups = yes
1714         winbind separator = /
1715         include system krb5 conf = no
1716
1717 #       min receivefile size = 4000
1718
1719         read only = no
1720
1721         smbd:sharedelay = 100000
1722         smbd:writetimeupdatedelay = 500000
1723         map hidden = no
1724         map system = no
1725         map readonly = no
1726         store dos attributes = yes
1727         create mask = 755
1728         dos filemode = yes
1729         strict rename = yes
1730         strict sync = yes
1731         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1732
1733         printing = vlp
1734         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1735         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1736         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1737         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1738         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1739         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1740         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1741         lpq cache time = 0
1742         print notify backchannel = yes
1743
1744         ncalrpc dir = $prefix_abs/ncalrpc
1745
1746         # The samba3.blackbox.smbclient_s3 test uses this to test that
1747         # sending messages works, and that the %m sub works.
1748         message command = mv %s $shrdir/message.%m
1749
1750         # fsrvp server requires registry shares
1751         registry shares = yes
1752
1753         # Used by RPC SRVSVC tests
1754         add share command = $bindir_abs/smbaddshare
1755         change share command = $bindir_abs/smbchangeshare
1756         delete share command = $bindir_abs/smbdeleteshare
1757
1758         # fruit:copyfile is a global option
1759         fruit:copyfile = yes
1760
1761         #this does not mean that we use non-secure test env,
1762         #it just means we ALLOW one to be configured.
1763         allow insecure wide links = yes
1764
1765         # Begin extra options
1766         $extra_options
1767         # End extra options
1768
1769         #Include user defined custom parameters if set
1770 ";
1771
1772         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1773                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1774         }
1775
1776         print CONF "
1777 [tmp]
1778         path = $shrdir
1779         comment = smb username is [%U]
1780 [tmpsort]
1781         path = $shrdir
1782         comment = Load dirsort module
1783         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1784 [tmpenc]
1785         path = $shrdir
1786         comment = encrypt smb username is [%U]
1787         smb encrypt = required
1788         vfs objects = dirsort
1789 [tmpguest]
1790         path = $shrdir
1791         guest ok = yes
1792 [guestonly]
1793         path = $shrdir
1794         guest only = yes
1795         guest ok = yes
1796 [forceuser]
1797         path = $shrdir
1798         force user = $unix_name
1799         guest ok = yes
1800 [forceuser_unixonly]
1801         comment = force a user with unix user SID and group SID
1802         path = $shrdir
1803         force user = pdbtest
1804         guest ok = yes
1805 [forceuser_wkngroup]
1806         comment = force a user with well-known group SID
1807         path = $shrdir
1808         force user = pdbtest_wkn
1809         guest ok = yes
1810 [forcegroup]
1811         path = $shrdir
1812         force group = nogroup
1813         guest ok = yes
1814 [ro-tmp]
1815         path = $ro_shrdir
1816         guest ok = yes
1817 [write-list-tmp]
1818         path = $shrdir
1819         read only = yes
1820         write list = $unix_name
1821 [valid-users-tmp]
1822         path = $shrdir
1823         valid users = $unix_name
1824         access based share enum = yes
1825 [msdfs-share]
1826         path = $msdfs_shrdir
1827         msdfs root = yes
1828         msdfs shuffle referrals = yes
1829         guest ok = yes
1830 [hideunread]
1831         copy = tmp
1832         hide unreadable = yes
1833 [tmpcase]
1834         copy = tmp
1835         case sensitive = yes
1836 [hideunwrite]
1837         copy = tmp
1838         hide unwriteable files = yes
1839 [durable]
1840         copy = tmp
1841         kernel share modes = no
1842         kernel oplocks = no
1843         posix locking = no
1844 [fs_specific]
1845         copy = tmp
1846         $fs_specific_conf
1847 [print1]
1848         copy = tmp
1849         printable = yes
1850
1851 [print2]
1852         copy = print1
1853 [print3]
1854         copy = print1
1855         default devmode = no
1856 [lp]
1857         copy = print1
1858
1859 [nfs4acl_simple]
1860         path = $shrdir
1861         comment = smb username is [%U]
1862         nfs4:mode = simple
1863         vfs objects = nfs4acl_xattr xattr_tdb
1864
1865 [nfs4acl_special]
1866         path = $shrdir
1867         comment = smb username is [%U]
1868         nfs4:mode = special
1869         vfs objects = nfs4acl_xattr xattr_tdb
1870
1871 [xcopy_share]
1872         path = $shrdir
1873         comment = smb username is [%U]
1874         create mask = 777
1875         force create mode = 777
1876 [posix_share]
1877         path = $shrdir
1878         comment = smb username is [%U]
1879         create mask = 0777
1880         force create mode = 0
1881         directory mask = 0777
1882         force directory mode = 0
1883         vfs objects = xattr_tdb streams_depot
1884 [aio]
1885         copy = tmp
1886         aio read size = 1
1887         aio write size = 1
1888
1889 [print\$]
1890         copy = tmp
1891
1892 [vfs_fruit]
1893         path = $shrdir
1894         vfs objects = catia fruit streams_xattr acl_xattr
1895         fruit:resource = file
1896         fruit:metadata = netatalk
1897         fruit:locking = netatalk
1898         fruit:encoding = native
1899
1900 [vfs_fruit_metadata_stream]
1901         path = $shrdir
1902         vfs objects = fruit streams_xattr acl_xattr
1903         fruit:resource = file
1904         fruit:metadata = stream
1905
1906 [vfs_fruit_stream_depot]
1907         path = $shrdir
1908         vfs objects = fruit streams_depot acl_xattr
1909         fruit:resource = stream
1910         fruit:metadata = stream
1911
1912 [vfs_wo_fruit]
1913         path = $shrdir
1914         vfs objects = streams_xattr acl_xattr
1915
1916 [vfs_wo_fruit_stream_depot]
1917         path = $shrdir
1918         vfs objects = streams_depot acl_xattr
1919
1920 [badname-tmp]
1921         path = $badnames_shrdir
1922         guest ok = yes
1923
1924 [manglenames_share]
1925         path = $manglenames_shrdir
1926         guest ok = yes
1927
1928 [dynamic_share]
1929         path = $shrdir/%R
1930         guest ok = yes
1931
1932 [widelinks_share]
1933         path = $widelinks_shrdir
1934         wide links = no
1935         guest ok = yes
1936
1937 [fsrvp_share]
1938         path = $shrdir
1939         comment = fake shapshots using rsync
1940         vfs objects = shell_snap shadow_copy2
1941         shell_snap:check path command = $fake_snap_pl --check
1942         shell_snap:create command = $fake_snap_pl --create
1943         shell_snap:delete command = $fake_snap_pl --delete
1944         # a relative path here fails, the snapshot dir is no longer found
1945         shadow:snapdir = $shrdir/.snapshots
1946
1947 [shadow1]
1948         path = $shadow_shrdir
1949         comment = previous versions snapshots under mount point
1950         vfs objects = shadow_copy2
1951         shadow:mountpoint = $shadow_mntdir
1952
1953 [shadow2]
1954         path = $shadow_shrdir
1955         comment = previous versions snapshots outside mount point
1956         vfs objects = shadow_copy2
1957         shadow:mountpoint = $shadow_mntdir
1958         shadow:snapdir = $shadow_tstdir/.snapshots
1959
1960 [shadow3]
1961         path = $shadow_shrdir
1962         comment = previous versions with subvolume snapshots, snapshots under base dir
1963         vfs objects = shadow_copy2
1964         shadow:mountpoint = $shadow_mntdir
1965         shadow:basedir = $shadow_basedir
1966         shadow:snapdir = $shadow_basedir/.snapshots
1967
1968 [shadow4]
1969         path = $shadow_shrdir
1970         comment = previous versions with subvolume snapshots, snapshots outside mount point
1971         vfs objects = shadow_copy2
1972         shadow:mountpoint = $shadow_mntdir
1973         shadow:basedir = $shadow_basedir
1974         shadow:snapdir = $shadow_tstdir/.snapshots
1975
1976 [shadow5]
1977         path = $shadow_shrdir
1978         comment = previous versions at volume root snapshots under mount point
1979         vfs objects = shadow_copy2
1980         shadow:mountpoint = $shadow_shrdir
1981
1982 [shadow6]
1983         path = $shadow_shrdir
1984         comment = previous versions at volume root snapshots outside mount point
1985         vfs objects = shadow_copy2
1986         shadow:mountpoint = $shadow_shrdir
1987         shadow:snapdir = $shadow_tstdir/.snapshots
1988
1989 [shadow7]
1990         path = $shadow_shrdir
1991         comment = previous versions snapshots everywhere
1992         vfs objects = shadow_copy2
1993         shadow:mountpoint = $shadow_mntdir
1994         shadow:snapdirseverywhere = yes
1995
1996 [shadow8]
1997         path = $shadow_shrdir
1998         comment = previous versions using snapsharepath
1999         vfs objects = shadow_copy2
2000         shadow:mountpoint = $shadow_mntdir
2001         shadow:snapdir = $shadow_tstdir/.snapshots
2002         shadow:snapsharepath = share
2003
2004 [shadow_fmt0]
2005         comment = Testing shadow:format with default option
2006         vfs object = shadow_copy2
2007         path = $shadow_shrdir
2008         read only = no
2009         guest ok = yes
2010         shadow:mountpoint = $shadow_mntdir
2011         shadow:basedir = $shadow_basedir
2012         shadow:snapdir = $shadow_basedir/.snapshots
2013         shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
2014
2015 [shadow_fmt1]
2016         comment = Testing shadow:format with only date component
2017         vfs object = shadow_copy2
2018         path = $shadow_shrdir
2019         read only = no
2020         guest ok = yes
2021         shadow:mountpoint = $shadow_mntdir
2022         shadow:basedir = $shadow_basedir
2023         shadow:snapdir = $shadow_basedir/.snapshots
2024         shadow:format = \@GMT-%Y-%m-%d
2025
2026 [shadow_fmt2]
2027         comment = Testing shadow:format with some hardcoded prefix
2028         vfs object = shadow_copy2
2029         path = $shadow_shrdir
2030         read only = no
2031         guest ok = yes
2032         shadow:mountpoint = $shadow_mntdir
2033         shadow:basedir = $shadow_basedir
2034         shadow:snapdir = $shadow_basedir/.snapshots
2035         shadow:format = snap\@GMT-%Y.%m.%d-%H.%M.%S
2036
2037 [shadow_fmt3]
2038         comment = Testing shadow:format with modified format
2039         vfs object = shadow_copy2
2040         path = $shadow_shrdir
2041         read only = no
2042         guest ok = yes
2043         shadow:mountpoint = $shadow_mntdir
2044         shadow:basedir = $shadow_basedir
2045         shadow:snapdir = $shadow_basedir/.snapshots
2046         shadow:format = \@GMT-%Y.%m.%d-%H_%M_%S-snap
2047
2048 [shadow_fmt4]
2049         comment = Testing shadow:snapprefix regex
2050         vfs object = shadow_copy2
2051         path = $shadow_shrdir
2052         read only = no
2053         guest ok = yes
2054         shadow:mountpoint = $shadow_mntdir
2055         shadow:basedir = $shadow_basedir
2056         shadow:snapdir = $shadow_basedir/.snapshots
2057         shadow:snapprefix = \^s[a-z]*p\$
2058         shadow:format = _GMT-%Y.%m.%d-%H.%M.%S
2059
2060 [shadow_fmt5]
2061         comment = Testing shadow:snapprefix with delim regex
2062         vfs object = shadow_copy2
2063         path = $shadow_shrdir
2064         read only = no
2065         guest ok = yes
2066         shadow:mountpoint = $shadow_mntdir
2067         shadow:basedir = $shadow_basedir
2068         shadow:snapdir = $shadow_basedir/.snapshots
2069         shadow:delimiter = \@GMT
2070         shadow:snapprefix = [a-z]*
2071         shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
2072
2073 [shadow_wl]
2074         path = $shadow_shrdir
2075         comment = previous versions with wide links allowed
2076         vfs objects = shadow_copy2
2077         shadow:mountpoint = $shadow_mntdir
2078         wide links = yes
2079 [dfq]
2080         path = $shrdir/dfree
2081         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
2082         admin users = $unix_name
2083         include = $dfqconffile
2084 [dfq_owner]
2085         path = $shrdir/dfree
2086         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
2087         inherit owner = yes
2088         include = $dfqconffile
2089 [acl_xattr_ign_sysacl_posix]
2090         copy = tmp
2091         acl_xattr:ignore system acls = yes
2092         acl_xattr:default acl style = posix
2093 [acl_xattr_ign_sysacl_windows]
2094         copy = tmp
2095         acl_xattr:ignore system acls = yes
2096         acl_xattr:default acl style = windows
2097
2098 [mangle_illegal]
2099         copy = tmp
2100         mangled names = illegal
2101
2102 [nosymlinks]
2103         copy = tmp
2104         path = $nosymlinks_shrdir
2105         follow symlinks = no
2106
2107 [local_symlinks]
2108         copy = tmp
2109         path = $local_symlinks_shrdir
2110         follow symlinks = yes
2111
2112 [kernel_oplocks]
2113         copy = tmp
2114         kernel oplocks = yes
2115         vfs objects = streams_xattr xattr_tdb
2116
2117 [compound_find]
2118         copy = tmp
2119         smbd:find async delay usec = 10000
2120         ";
2121         close(CONF);
2122
2123         unless (open(DFQCONF, ">$dfqconffile")) {
2124                 warn("Unable to open $dfqconffile");
2125                 return undef;
2126         }
2127         close(DFQCONF);
2128
2129         ##
2130         ## create a test account
2131         ##
2132
2133         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
2134            warn("Unable to open $nss_wrapper_passwd");
2135            return undef;
2136         }
2137         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
2138 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
2139 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
2140 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
2141 userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
2142 pdbtest_wkn:x:$uid_pdbtest_wkn:$gid_everyone:pdbtest_wkn gecos:$prefix_abs:/bin/false
2143 force_user:x:$uid_force_user:$gid_force_user:force user gecos:$prefix_abs:/bin/false
2144 smbget_user:x:$uid_smbget:$gid_domusers:smbget_user gecos:$prefix_abs:/bin/false
2145 user1:x:$uid_user1:$gid_nogroup:user1 gecos:$prefix_abs:/bin/false
2146 user2:x:$uid_user2:$gid_nogroup:user2 gecos:$prefix_abs:/bin/false
2147 ";
2148         if ($unix_uid != 0) {
2149                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
2150 ";
2151         }
2152         close(PASSWD);
2153
2154         unless (open(GROUP, ">$nss_wrapper_group")) {
2155              warn("Unable to open $nss_wrapper_group");
2156              return undef;
2157         }
2158         print GROUP "nobody:x:$gid_nobody:
2159 nogroup:x:$gid_nogroup:nobody
2160 $unix_name-group:x:$unix_gids[0]:
2161 domusers:X:$gid_domusers:
2162 domadmins:X:$gid_domadmins:
2163 userdup:x:$gid_userdup:$unix_name
2164 everyone:x:$gid_everyone:
2165 force_user:x:$gid_force_user:
2166 ";
2167         if ($unix_gids[0] != 0) {
2168                 print GROUP "root:x:$gid_root:
2169 ";
2170         }
2171
2172         close(GROUP);
2173
2174         ## hosts
2175         my $hostname = lc($server);
2176         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
2177                 warn("Unable to open $nss_wrapper_hosts");
2178                 return undef;
2179         }
2180         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
2181         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
2182         close(HOSTS);
2183
2184         ## hosts
2185         unless (open(RESOLV_CONF, ">$resolv_conf")) {
2186                 warn("Unable to open $resolv_conf");
2187                 return undef;
2188         }
2189         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
2190                 if (defined($dc_server_ip)) {
2191                         print RESOLV_CONF "nameserver $dc_server_ip\n";
2192                 }
2193                 if (defined($dc_server_ipv6)) {
2194                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
2195                 }
2196         } else {
2197                 print RESOLV_CONF "nameserver ${server_ip}\n";
2198                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
2199         }
2200         close(RESOLV_CONF);
2201
2202         foreach my $evlog (@eventlog_list) {
2203                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
2204                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
2205                 close(EVENTLOG);
2206         }
2207
2208         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
2209         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
2210         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
2211         $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
2212         if ($ENV{SAMBA_DNS_FAKING}) {
2213                 $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
2214         } else {
2215                 $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
2216         }
2217
2218         createuser($self, $unix_name, $password, $conffile) || die("Unable to create user");
2219         createuser($self, "force_user", $password, $conffile) || die("Unable to create force_user");
2220         createuser($self, "smbget_user", $password, $conffile) || die("Unable to create smbget_user");
2221         createuser($self, "user1", $password, $conffile) || die("Unable to create user1");
2222         createuser($self, "user2", $password, $conffile) || die("Unable to create user2");
2223
2224         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
2225         print DNS_UPDATE_LIST "A $server. $server_ip\n";
2226         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
2227         close(DNS_UPDATE_LIST);
2228
2229         print "DONE\n";
2230
2231         $ret{SERVER_IP} = $server_ip;
2232         $ret{SERVER_IPV6} = $server_ipv6;
2233         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
2234         $ret{NMBD_TEST_LOG_POS} = 0;
2235         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
2236         $ret{WINBINDD_TEST_LOG_POS} = 0;
2237         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
2238         $ret{SMBD_TEST_LOG_POS} = 0;
2239         $ret{SERVERCONFFILE} = $conffile;
2240         $ret{CONFIGURATION} ="-s $conffile";
2241         $ret{LOCK_DIR} = $lockdir;
2242         $ret{SERVER} = $server;
2243         $ret{USERNAME} = $unix_name;
2244         $ret{USERID} = $unix_uid;
2245         $ret{DOMAIN} = $domain;
2246         $ret{NETBIOSNAME} = $server;
2247         $ret{PASSWORD} = $password;
2248         $ret{PIDDIR} = $piddir;
2249         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
2250         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
2251         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
2252         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
2253         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
2254         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
2255         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
2256         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
2257         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
2258         if ($ENV{SAMBA_DNS_FAKING}) {
2259                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
2260         } else {
2261                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
2262         }
2263         $ret{LOCAL_PATH} = "$shrdir";
2264         $ret{LOGDIR} = $logdir;
2265
2266         #
2267         # Avoid hitting system krb5.conf -
2268         # An env that needs Kerberos will reset this to the real
2269         # value.
2270         #
2271         $ret{KRB5_CONFIG} = abs_path($prefix) . "/no_krb5.conf";
2272
2273         # Define KRB5CCNAME for each environment we set up
2274         $ret{KRB5_CCACHE} = abs_path($prefix) . "/krb5ccache";
2275         $ENV{KRB5CCNAME} = $ret{KRB5_CCACHE};
2276
2277         return \%ret;
2278 }
2279
2280 sub wait_for_start($$$$$)
2281 {
2282         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
2283         my $ret;
2284
2285         if ($nmbd eq "yes") {
2286                 my $count = 0;
2287
2288                 # give time for nbt server to register its names
2289                 print "checking for nmbd\n";
2290
2291                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
2292                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
2293
2294                 do {
2295                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
2296                         if ($ret != 0) {
2297                                 sleep(1);
2298                         } else {
2299                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
2300                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
2301                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
2302                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
2303                         }
2304                         $count++;
2305                 } while ($ret != 0 && $count < 10);
2306                 if ($count == 10) {
2307                         print "NMBD not reachable after 10 retries\n";
2308                         teardown_env($self, $envvars);
2309                         return 0;
2310                 }
2311         }
2312
2313         if ($winbindd eq "yes") {
2314             print "checking for winbindd\n";
2315             my $count = 0;
2316             do {
2317                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
2318                 if ($ret != 0) {
2319                     sleep(1);
2320                 }
2321                 $count++;
2322             } while ($ret != 0 && $count < 20);
2323             if ($count == 20) {
2324                 print "WINBINDD not reachable after 20 seconds\n";
2325                 teardown_env($self, $envvars);
2326                 return 0;
2327             }
2328         }
2329
2330         if ($smbd eq "yes") {
2331             # make sure smbd is also up set
2332             print "wait for smbd\n";
2333
2334             my $count = 0;
2335             do {
2336                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
2337                 if ($ret != 0) {
2338                     sleep(1);
2339                 }
2340                 $count++
2341             } while ($ret != 0 && $count < 20);
2342             if ($count == 20) {
2343                 print "SMBD failed to start up in a reasonable time (20sec)\n";
2344                 teardown_env($self, $envvars);
2345                 return 0;
2346             }
2347         }
2348
2349         # Ensure we have domain users mapped.
2350         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
2351         if ($ret != 0) {
2352             return 1;
2353         }
2354         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
2355         if ($ret != 0) {
2356             return 1;
2357         }
2358         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add sid=S-1-1-0 unixgroup=everyone type=builtin");
2359         if ($ret != 0) {
2360             return 1;
2361         }
2362
2363         if ($winbindd eq "yes") {
2364             # note: creating builtin groups requires winbindd for the
2365             # unix id allocator
2366             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
2367             if ($ret != 0) {
2368                 print "Failed to create BUILTIN\\Users group\n";
2369                 return 0;
2370             }
2371             my $count = 0;
2372             do {
2373                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache del IDMAP/SID2XID/S-1-5-32-545");
2374                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
2375                 if ($ret != 0) {
2376                     sleep(2);
2377                 }
2378                 $count++;
2379             } while ($ret != 0 && $count < 10);
2380             if ($count == 10) {
2381                 print "WINBINDD not reachable after 20 seconds\n";
2382                 teardown_env($self, $envvars);
2383                 return 0;
2384             }
2385         }
2386
2387         print $self->getlog_env($envvars);
2388
2389         return 1;
2390 }
2391
2392 1;