ira/wip.git
10 years agotdb: Apply some const, just for clarity
Volker Lendecke [Sat, 13 Feb 2010 11:17:00 +0000 (12:17 +0100)]
tdb: Apply some const, just for clarity

10 years agoUse sec_initial_uid() in the places where being root doesn't matter,
Jeremy Allison [Sat, 13 Feb 2010 07:18:53 +0000 (23:18 -0800)]
Use sec_initial_uid() in the places where being root doesn't matter,
and 0 in the places where it does.

Jeremy

10 years agoSimplify the logic in make_connection_snum(), and make it match Windows behavior.
Jeremy Allison [Sat, 13 Feb 2010 06:45:37 +0000 (22:45 -0800)]
Simplify the logic in make_connection_snum(), and make it match Windows behavior.

Cause all exit paths to go through one place, where all cleanup is
done. change_to_root_user() for pathname operations that should succeed if
the path exists, even if the connecting user has no access.

For example, a share can now be defined with a path of /root/only/access
(where /root/only/access is a directory path with all components only
accessible to root e.g. root owned, permissions 700 on every component).
Non-root users will now correctly connect, but get ACCESS_DENIED on
all activities (which matches Windows behavior). Previously, non-root
users would get NT_STATUS_BAD_NETWORK_NAME on doing a TConX to this
share, even though it's a perfectly valid share path (just not accessible
to them).

This change was inspired by the research I did for bug #7126, which
was reported by bepi@adria.it.

As this is a change in a core function, I'm proposing to leave
this only in master for 3.6.0, not back-port to any existing releases.
This should give us enough time to decide if this is the way we want this to
behave (as Windows) or if we prefer the previous behavior.

Jeremy.

10 years agoFix warning messages on compile in g_lock.c Volker & Michael please check.
Jeremy Allison [Sat, 13 Feb 2010 06:21:19 +0000 (22:21 -0800)]
Fix warning messages on compile in g_lock.c Volker & Michael please check.

Jeremy.

10 years agoFix error in docs. Should be milliseconds, not microseconds.
Jeremy Allison [Sat, 13 Feb 2010 05:29:58 +0000 (21:29 -0800)]
Fix error in docs. Should be milliseconds, not microseconds.

10 years agos3/smbd: change locking behavior when "lock spin time = 0".
Steven Danneman [Fri, 12 Feb 2010 23:42:50 +0000 (15:42 -0800)]
s3/smbd: change locking behavior when "lock spin time = 0".

The "lock spin time" parameter mimics the following Windows
setting which by default is 250ms in Windows and 200ms in Samba.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\LockViolationDelay

When a client sends repeated, non-blocking, contending BRL requests
to a Windows server, after the first Windows starts treating these
requests as timed blocking locks with the above timeout.

As an efficiency, I've changed the behavior when this setting is 0,
to skip this logic and treat all requests as non-blocking locks.

This gives the smbd server behavior similar to the 3.0 release with
the do_spin_lock() implementation.

I've also changed the blocking lock parameter in the call from
push_blocking_lock_request() to true as all requests made in this
path are blocking by definition.

10 years agoRemove #if SOFTLINK_OPTIMIZATION code.
Jeremy Allison [Sat, 13 Feb 2010 02:50:54 +0000 (18:50 -0800)]
Remove #if SOFTLINK_OPTIMIZATION code.

This hasn't been turned on or been capable of doing so for
many years now. Makes this jumbo function smaller...
Jeremy.

10 years agoRevert "Fix bug #7126 - [SMBD] With access denied error smbd return wrong NT_STATUS_O...
Jeremy Allison [Sat, 13 Feb 2010 02:17:32 +0000 (18:17 -0800)]
Revert "Fix bug #7126 - [SMBD] With access denied error smbd return wrong NT_STATUS_OBJECT_PATH_INVALID error"

This reverts commit 2fdd8b10c6abadd27c579e772c0482214d2363a5.

This fix is incorrect. The original code works as desired,
I made a mistake here.

Jeremy.

10 years agoFix bug #7126 - [SMBD] With access denied error smbd return wrong NT_STATUS_OBJECT_PA...
Jeremy Allison [Fri, 12 Feb 2010 23:45:20 +0000 (15:45 -0800)]
Fix bug #7126 - [SMBD] With access denied error smbd return wrong NT_STATUS_OBJECT_PATH_INVALID error

As tridge's comment says, we should be ignoring ACCESS_DENIED
on the share path in a TconX call, instead allowing the mount
and having individual SMB calls fail (as Windows does). The
original code erroneously caught SMB_VFS_STAT != 0 and errored
out on that.

Jeremy.

10 years agopackaging(RHEL-CTDB): adapt configure.rpm to match the spec-file configure call
Michael Adam [Tue, 9 Feb 2010 07:00:06 +0000 (08:00 +0100)]
packaging(RHEL-CTDB): adapt configure.rpm to match the spec-file configure call

Michael

10 years agov3-4-ctdb: Do not do any logrotation
Volker Lendecke [Thu, 14 Jan 2010 17:26:01 +0000 (18:26 +0100)]
v3-4-ctdb: Do not do any logrotation

10 years agos3:registry: eliminate race condition in creating/scanning sorted subkeys
Michael Adam [Mon, 8 Feb 2010 10:01:47 +0000 (11:01 +0100)]
s3:registry: eliminate race condition in creating/scanning sorted subkeys

Called, from key_exists, scan_sorted_subkeys re-creates the sorted
subkeys record of the given key and then searches through it.
The race is that between creation and parsing of the sorted subkey
record, another process that stores some other subkey of the same
parent key will delete the sorted subkey record, resulting in an
WERR_BADFILE of an operation that should actually succeed.

This patch fixes the issue by wrapping the creation and parsing
into a transaction.

Michael

10 years agos3:make "net conf addshare" atomic by wrapping all writes in one transaction
Michael Adam [Fri, 29 Jan 2010 14:04:25 +0000 (15:04 +0100)]
s3:make "net conf addshare" atomic by wrapping all writes in one transaction

Michael

10 years agos3:g_lock: remove a nested event loop, replacing the inner loop by select
Michael Adam [Sat, 23 Jan 2010 00:17:06 +0000 (01:17 +0100)]
s3:g_lock: remove a nested event loop, replacing the inner loop by select

This made smbd crash in g_lock_lock() when trying to start a
transaction on a db with an already started transaction,
e.g. in a tcon_and_X where the share_info.tdb was not yet
initialized but share_info.tdb was already locked by another
process or writing acces to the winreg rpc pipe where the
registry tdb was already locked by another process.

What we really _want_ to do here by design is to react to
MSG_DBWRAP_G_LOCK_RETRY messages that are either sent
by a client doing g_lock_unlock or by ourselves when
we receive a CTDB_SRVID_SAMBA_NOTIFY or
CTDB_SRVID_RECONFIGURE message from ctdbd, i.e. when
either a client holding a lock or a complete node
has died.

Doing this properly involves calling tevent_loop_once(),
but doing this here with the main ctdbd messaging context
creates a nested event loop when g_lock_lock() is called
from the main event loop.

So as a quick fix, we act a little corasely here: we do
a select on the ctdb connection fd and when it is readable
or we get EINTR, then we retry without actually parsing
any ctdb packages or dispatching messages. This means that
we retry more often than necessary and intended by design,
but this does not harm and it is unobtrusive. When we have
finished, the main loop will pick up all the messages and
ctdb packets. The only extra twist is that we cannot use
timed events here but have to handcode a timeout for select.

Michael

10 years agos3:ctdb_conn: add ctdbd_conn_get_fd() to get the fd out of the ctdb connection
Michael Adam [Fri, 22 Jan 2010 23:05:15 +0000 (00:05 +0100)]
s3:ctdb_conn: add ctdbd_conn_get_fd() to get the fd out of the ctdb connection

Michael

10 years agos3:g_lock: remove an unreached code path.
Michael Adam [Fri, 22 Jan 2010 14:56:28 +0000 (15:56 +0100)]
s3:g_lock: remove an unreached code path.

Michael

10 years agos3:dbwrap_ctdb: fix reading/storing of special key __db_sequence_number__
Michael Adam [Mon, 18 Jan 2010 16:26:04 +0000 (17:26 +0100)]
s3:dbwrap_ctdb: fix reading/storing of special key __db_sequence_number__

The key for reading and writing was inconsistent due to a
off by one data length.

Michael

10 years agos3:dbwrap_ctdb: exit early when nothing has been written in transaction_commit.
Michael Adam [Wed, 13 Jan 2010 22:53:54 +0000 (23:53 +0100)]
s3:dbwrap_ctdb: exit early when nothing has been written in transaction_commit.

This skips update of the __db_sequence_number__ record when nothing else has
been written. There are transactions that are just openend and then nothing
is written until transaction_commit is called. This is for instance the case
with registry initialization routines: They start a transaction and only
write somthing when the registry has not been initialized yet.
So this change will skip many db_seqnum bumps and TRANS3_COMMIT roundtrips.

Michael

10 years agos3:dbwrap_ctdb: fix brown paperbag bug in ctdb_transaction_commit.
Michael Adam [Wed, 13 Jan 2010 22:51:34 +0000 (23:51 +0100)]
s3:dbwrap_ctdb: fix brown paperbag bug in ctdb_transaction_commit.

I carefully prepared the return value only to "return 0;" at the bottom. :-(
This may well have hit us for instance in the nested cancel case
and produced random errors.

Michael

10 years agos3:dbwrap_ctdb: fix logic error in pull_newest_from_marshall_buffer().
Michael Adam [Tue, 5 Jan 2010 23:37:21 +0000 (00:37 +0100)]
s3:dbwrap_ctdb: fix logic error in pull_newest_from_marshall_buffer().

The logic bug was that if a record was found in the marshall buffer,
then always the ctdb header of tha last record in the marshall buffer
was returned, and not the ctdb header of the last occurrence of the
requested record.

This is fixed by introducing an additional temporary variable.

Michael

10 years agos3:dbwrap_ctdb: fix an uninitialized variable.
Michael Adam [Tue, 5 Jan 2010 15:17:27 +0000 (16:17 +0100)]
s3:dbwrap_ctdb: fix an uninitialized variable.

Michael

10 years agos3:dbwrap_ctdb: fix two "may be used uninitialized" warnings
Michael Adam [Fri, 11 Dec 2009 23:38:14 +0000 (00:38 +0100)]
s3:dbwrap_ctdb: fix two "may be used uninitialized" warnings

Michael

10 years agos3:dbwrap_ctdb: fix db_ctdb_fetch_db_seqnum_from_db() when NT_STATUS_NOT_FOUND.
Michael Adam [Fri, 11 Dec 2009 23:30:37 +0000 (00:30 +0100)]
s3:dbwrap_ctdb: fix db_ctdb_fetch_db_seqnum_from_db() when NT_STATUS_NOT_FOUND.

Don't treat this as an error but return seqnum 0 instead.

Michael

10 years agos3:dbwrap: If "-n" is given to dbwrap_torture, open db with CLEAR_IF_FIRST
Volker Lendecke [Fri, 11 Dec 2009 15:51:40 +0000 (16:51 +0100)]
s3:dbwrap: If "-n" is given to dbwrap_torture, open db with CLEAR_IF_FIRST

10 years agos3:build: remove checks for deprecated ctdb controls.
Michael Adam [Fri, 11 Dec 2009 15:45:38 +0000 (16:45 +0100)]
s3:build: remove checks for deprecated ctdb controls.

Michael

10 years agos3:dbwrap_ctdb: maintain a database sequence number that bumps in transactions
Michael Adam [Fri, 11 Dec 2009 13:07:28 +0000 (14:07 +0100)]
s3:dbwrap_ctdb: maintain a database sequence number that bumps in transactions

For persistent databases, 64bit integer is kept in a special record
__db_sequence_number__. This record is incremented with each completed
transaction.

The retry mechanism for failing TRANS3_COMMIT controls inside the
db_ctdb_transaction_commit() function now relies one a modified
behaviour of ctdbd's treatment of persistent databases in recoveries.
Recently, a special treatment for persistent databases had been
introduced in ctdb (1.0.108) to work around the problems with the
orinal design of persistent transactions.
Now with the rewrite we need to revert to the old behaviour that
ctdb always takes the newest copies of all records.

This change also paves the way for a next step, which will make
recovery use the db seqnum to tell which node has the newest copy
of a persistent db and use that node's copy. This will greatly
reduce the amount of data transferred with each recovery.

Michael

10 years agos3:dbwrap_ctdb: change db_ctdb_transaction_store() to return NTSTATUS.
Michael Adam [Fri, 11 Dec 2009 11:30:57 +0000 (12:30 +0100)]
s3:dbwrap_ctdb: change db_ctdb_transaction_store() to return NTSTATUS.

The return values calculated by the callers were wrong anyways since
the new marshalling code does not set the local tdbs tdb error code.

Michael

10 years agos3:dbwrap_ctdb: update (C)
Michael Adam [Fri, 11 Dec 2009 09:35:50 +0000 (10:35 +0100)]
s3:dbwrap_ctdb: update (C)

Michael

10 years agobuild: Add a configure check for CTDB_CONTROL_TRANS3_COMMIT.
Michael Adam [Fri, 4 Dec 2009 10:49:21 +0000 (11:49 +0100)]
build: Add a configure check for CTDB_CONTROL_TRANS3_COMMIT.

This is the new implementation of ctdb transactions using the
global lock feature. It is needed by the current dbwrap_ctdb code.

Michael

10 years agos3: Add tdb_data_equal
Volker Lendecke [Thu, 3 Dec 2009 17:43:49 +0000 (18:43 +0100)]
s3: Add tdb_data_equal

10 years agos3:torture: add a test LOCAL-DBTRANS to torture dbwrap with transactions.
Volker Lendecke [Fri, 11 Dec 2009 14:37:52 +0000 (15:37 +0100)]
s3:torture: add a test LOCAL-DBTRANS to torture dbwrap with transactions.

10 years agos3:dbwrap_ctdb: start rewrite of transactions using the global lock (g_lock)
Michael Adam [Thu, 3 Dec 2009 16:29:54 +0000 (17:29 +0100)]
s3:dbwrap_ctdb: start rewrite of transactions using the global lock (g_lock)

This simplifies the transaction code a lot:

* transaction_start essentially consists of acquiring a global lock.

* No write operations at all are performed on the local database
  until the transaction is committed: Every store operation is just
  going into the marshall buffer.

* The commit operation calls a new simplified TRANS3_COMMIT control
  in ctdb which rolls out thae changes to all nodes including the
  node that is performing the transaction.

Michael

10 years agos3: setup debug for smbtorture
Volker Lendecke [Sun, 6 Dec 2009 23:36:51 +0000 (00:36 +0100)]
s3: setup debug for smbtorture

10 years agos3: Add ctdb_conn_msg_ctx()
Volker Lendecke [Fri, 4 Dec 2009 12:22:30 +0000 (13:22 +0100)]
s3: Add ctdb_conn_msg_ctx()

10 years agos3: Implement global locks in a g_lock tdb
Volker Lendecke [Sun, 25 Oct 2009 15:12:12 +0000 (16:12 +0100)]
s3: Implement global locks in a g_lock tdb

This is the basis to implement global locks in ctdb without depending on a
shared file system. The initial goal is to make ctdb persistent transactions
deterministic without too many timeouts.

10 years agos4:kdc Fill in created_by principal field
Simo Sorce [Fri, 12 Feb 2010 21:24:22 +0000 (16:24 -0500)]
s4:kdc Fill in created_by principal field

10 years agos4:kdc Fix double free and uninitialized memory.
Simo Sorce [Fri, 12 Feb 2010 19:54:18 +0000 (14:54 -0500)]
s4:kdc Fix double free and uninitialized memory.

In samba_kdc_trust_message2entry() on error, hdb_free_entry()
may end up trying to access uninitialized memory or double
free the hdb_entry.

10 years agotestprogs: print all printerinfo levels in spoolss test.
Günther Deschner [Fri, 12 Feb 2010 19:31:46 +0000 (20:31 +0100)]
testprogs: print all printerinfo levels in spoolss test.

Guenther

10 years agos4:auth/credentials/credentials.c - Initialise the "lm_response" and "nt_response...
Matthias Dieter Wallnöfer [Fri, 12 Feb 2010 13:58:27 +0000 (14:58 +0100)]
s4:auth/credentials/credentials.c - Initialise the "lm_response" and "nt_response" structures

In some cases those structures are not initialised and the whole authentication
system crashes with a SIGSEGV. Bug discovered by Matthieu Patou in bug #6755.

10 years agos4:getopt.py - set the password callback only when no password has been provided
Matthias Dieter Wallnöfer [Fri, 12 Feb 2010 12:55:14 +0000 (13:55 +0100)]
s4:getopt.py - set the password callback only when no password has been provided

Previously the "no_pass" and "no_pass2" variables weren't handled correctly.
Since at the initialisation of the "CredentialsOptions" we don't have any
password at all. Only afterwards we could get one through "set_password".

If a password is specified, use it. If no password is specified, consider the
use fo an input mask on STDOUT. But if the loadparm context contains one prefer
it over the input.

10 years agos4:net_drs_bind: make some more stuff static
Stefan Metzmacher [Fri, 12 Feb 2010 11:20:03 +0000 (12:20 +0100)]
s4:net_drs_bind: make some more stuff static

metze

10 years agos4:net/drs: use the full path to "utils/net/drs/net_drs*.h"
Stefan Metzmacher [Fri, 12 Feb 2010 11:19:15 +0000 (12:19 +0100)]
s4:net/drs: use the full path to "utils/net/drs/net_drs*.h"

This fixes the build with automatic dependecies.

metze

10 years agos3: notify_onelevel does not use seqnums, so don't open asking for it
Volker Lendecke [Fri, 12 Feb 2010 11:06:50 +0000 (12:06 +0100)]
s3: notify_onelevel does not use seqnums, so don't open asking for it

10 years agospoolss: regenerate hand-marshalled ndr_pull_spoolss_DriverInfo101 after ndr64 changes.
Günther Deschner [Fri, 12 Feb 2010 10:32:08 +0000 (11:32 +0100)]
spoolss: regenerate hand-marshalled ndr_pull_spoolss_DriverInfo101 after ndr64 changes.

Guenther

10 years agospoolss: make sure hand-marshalled spoolss_DriverInfo101 handles relative_highest_offset.
Günther Deschner [Thu, 11 Feb 2010 17:58:11 +0000 (18:58 +0100)]
spoolss: make sure hand-marshalled spoolss_DriverInfo101 handles relative_highest_offset.

Guenther

10 years agospoolss: regenerate hand-marshalled ndr_push_spoolss_DriverInfo101 after ndr64 changes.
Günther Deschner [Fri, 12 Feb 2010 10:25:59 +0000 (11:25 +0100)]
spoolss: regenerate hand-marshalled ndr_push_spoolss_DriverInfo101 after ndr64 changes.

Guenther

10 years agoRemove the code replaced by widelinks warning.
Jeremy Allison [Thu, 11 Feb 2010 23:59:41 +0000 (15:59 -0800)]
Remove the code replaced by widelinks warning.

Jeremy.

10 years agoRemove lp_safe_widelinks() -> convert to just lp_widelinks. Suggestion from Volker.
Jeremy Allison [Thu, 11 Feb 2010 23:16:23 +0000 (15:16 -0800)]
Remove lp_safe_widelinks() -> convert to just lp_widelinks. Suggestion from Volker.

Create widelinks_warning(int snum) to cover the message needed in make_connection.

Jeremy.

10 years agos3 test: Make the netbios name test pass again
Kai Blin [Tue, 2 Feb 2010 14:18:01 +0000 (15:18 +0100)]
s3 test: Make the netbios name test pass again

10 years agos4: Switch to S3-style id mapping data types.
Kai Blin [Thu, 23 Apr 2009 14:37:11 +0000 (16:37 +0200)]
s4: Switch to S3-style id mapping data types.

10 years agos4 idmap: Make the sid_to_xid and xid_to_sid calls static.
Kai Blin [Wed, 22 Apr 2009 16:10:12 +0000 (18:10 +0200)]
s4 idmap: Make the sid_to_xid and xid_to_sid calls static.

Looking at the winbind interface, we should only be using the bulk conversion calls.

10 years agolibwbclient: Test wbcLookupName async functions
Kai Blin [Fri, 29 Jan 2010 11:09:18 +0000 (12:09 +0100)]
libwbclient: Test wbcLookupName async functions

10 years agolibwbclient: Implement wbcLookupName_send/recv
Kai Blin [Wed, 27 May 2009 22:57:32 +0000 (00:57 +0200)]
libwbclient: Implement wbcLookupName_send/recv

10 years agolibwbclient: Implement wbcAuthenticateUserEx_send/recv
Kai Blin [Wed, 27 May 2009 22:55:57 +0000 (00:55 +0200)]
libwbclient: Implement wbcAuthenticateUserEx_send/recv

10 years agolibwbclient: Implement wbcLookupSid_send/recv
Kai Blin [Fri, 24 Apr 2009 14:24:56 +0000 (16:24 +0200)]
libwbclient: Implement wbcLookupSid_send/recv

10 years agolibwbclient: Implement wbcGidToSid_send/recv
Kai Blin [Thu, 2 Apr 2009 07:45:39 +0000 (09:45 +0200)]
libwbclient: Implement wbcGidToSid_send/recv

10 years agolibwbclient: Implement wbcSidToGid_send/recv
Kai Blin [Thu, 2 Apr 2009 07:22:43 +0000 (09:22 +0200)]
libwbclient: Implement wbcSidToGid_send/recv

10 years agolibwbclient: Implement wbcUidToSid_send/recv
Kai Blin [Thu, 2 Apr 2009 07:57:40 +0000 (09:57 +0200)]
libwbclient: Implement wbcUidToSid_send/recv

10 years agolibwbclient: Implement wbcSidToUid_send/recv
Kai Blin [Tue, 31 Mar 2009 21:10:48 +0000 (23:10 +0200)]
libwbclient: Implement wbcSidToUid_send/recv

10 years agolibwbclient: Add wbcInterfaceDetails_send/recv
Kai Blin [Sun, 15 Feb 2009 10:01:44 +0000 (11:01 +0100)]
libwbclient: Add wbcInterfaceDetails_send/recv

10 years agolibwbclient: Add wbcDomainInfo_send/recv calls
Kai Blin [Sat, 14 Feb 2009 09:06:05 +0000 (10:06 +0100)]
libwbclient: Add wbcDomainInfo_send/recv calls

10 years agolibwbclient: Add wbcDomainName_send/recv call
Kai Blin [Fri, 13 Feb 2009 21:51:52 +0000 (22:51 +0100)]
libwbclient: Add wbcDomainName_send/recv call

10 years agolibwbclient: Add wbcNetbiosName_send/recv calls
Kai Blin [Fri, 13 Feb 2009 21:37:56 +0000 (22:37 +0100)]
libwbclient: Add wbcNetbiosName_send/recv calls

10 years agolibwbclient: Add async wbcInfo_send()/wbcInfo_recv() calls
Kai Blin [Wed, 25 Mar 2009 09:08:10 +0000 (10:08 +0100)]
libwbclient: Add async wbcInfo_send()/wbcInfo_recv() calls

10 years agolibwbclient: add wbcInterfaceVersion send/recv calls
Kai Blin [Wed, 11 Feb 2009 23:11:45 +0000 (00:11 +0100)]
libwbclient: add wbcInterfaceVersion send/recv calls

10 years agolibwbclient: torture-test wbcPing async functions.
Kai Blin [Fri, 29 Jan 2010 10:22:14 +0000 (11:22 +0100)]
libwbclient: torture-test wbcPing async functions.

10 years agolibwbclient: Add async wbcPing_send/_recv
Kai Blin [Tue, 24 Mar 2009 21:51:11 +0000 (22:51 +0100)]
libwbclient: Add async wbcPing_send/_recv

10 years agolibwbclient: Zero out context on initialization
Kai Blin [Fri, 29 Jan 2010 10:54:33 +0000 (11:54 +0100)]
libwbclient: Zero out context on initialization

This prevents a segfault when using wbcDebug without prior call to wbcSetDebug

10 years agoFinal part of jumbo patch for bug #7104 - "wide links" and "unix extensions" are...
Jeremy Allison [Thu, 11 Feb 2010 22:45:53 +0000 (14:45 -0800)]
Final part of jumbo patch for bug #7104 - "wide links" and "unix extensions" are incompatible.

Volker pointed out that the preexec scripts get passed the conn->connectpath
as a parameter, so call canonicalize_connect_path() both *before* and after
the preexec scripts. Ignore errors on the call before the preexec scripts,
as the path may not exist until created by the preexec scripts.

Jeremy.

10 years agoIntroduce lp_safe_widelinks()
Simo Sorce [Thu, 11 Feb 2010 21:12:29 +0000 (16:12 -0500)]
Introduce lp_safe_widelinks()

This way we avoid any chance that a configuration reload may turn
back on wide links when unix extensions are enabled.

10 years agoFine changes to previous fix for bug #7104 - "wide links" and "unix extensions" are...
Jeremy Allison [Thu, 11 Feb 2010 19:00:45 +0000 (11:00 -0800)]
Fine changes to previous fix for bug #7104 - "wide links" and "unix extensions" are incompatible.

Make sure we match the previous allow widelinks behavior, in that
non-root preexec scripts can create share directories for a share
definition.

Jeremy

10 years agoSuplementary patch for bug #7104 - "wide links" and "unix extensions" are incompatible.
Jeremy Allison [Thu, 11 Feb 2010 18:19:33 +0000 (10:19 -0800)]
Suplementary patch for bug #7104 - "wide links" and "unix extensions" are incompatible.

Bug reported by Ralf Zimmermann <r.zimmermann@siegnetz.de>. Reproduced by jra.

If the target directory of a share doesn't exist, but is designed to
be created by a "root preexec" script call, then the widelinks check
is done too early - thus preventing the user from connecting to the
share.

Fix is to re-arrange the order of checks in make_connection_snum()
to always do the following order of operations:

(1). Turn off wide links if unix extensions = yes.
(2). Call any root preexec scripts.
(3). Canonicalize the share path to remove any symlinks (ie. end
up with the realpath in the connection_struct).

Jeremy.

10 years agoldb_match - Ignore ":dn" part of extended matches for now
Matthias Dieter Wallnöfer [Thu, 11 Feb 2010 14:42:48 +0000 (15:42 +0100)]
ldb_match - Ignore ":dn" part of extended matches for now

It's not fully clear what this ":dn" part means for us. What we know is that
older AD implementations (Windows Server 2000, 2003) need it to have extended
matches working in the expected way.

To be able to interoperate with s3's winbind and other tools I and gd decided
to transform this into a warning until we know what to do.

This should fix bug #6511.

10 years agos4-provision: import the R2 functional level
Andrew Tridgell [Thu, 11 Feb 2010 13:33:13 +0000 (00:33 +1100)]
s4-provision: import the R2 functional level

this makes it easier to modify the script to set us at R2 level in
provision. We should make this a parameter.

10 years agos4-build: avoid finding python symlinks
Andrew Tridgell [Thu, 11 Feb 2010 13:11:11 +0000 (00:11 +1100)]
s4-build: avoid finding python symlinks

emacs creates symlinks to .py files while you are editing them. This
could cause build failures.

10 years agos4-provision: fixed --function-level option to provision
Andrew Tridgell [Thu, 11 Feb 2010 12:39:56 +0000 (23:39 +1100)]
s4-provision: fixed --function-level option to provision

we need the DS_DOMAIN_* levels imported

10 years agos4-script: make enablerecyclebin use system_session
Andrew Tridgell [Thu, 11 Feb 2010 12:38:23 +0000 (23:38 +1100)]
s4-script: make enablerecyclebin use system_session

This allows it to work against our local ldb

10 years agos4-pyldb: null terminate string ldb message elements from python
Andrew Tridgell [Thu, 11 Feb 2010 12:37:44 +0000 (23:37 +1100)]
s4-pyldb: null terminate string ldb message elements from python

We need to eventually get rid of ldb_msg_find_attr_as_string() (or add
a mem_ctx to it), but meanwhile we have too many places that break if
we don't add a nul to the end of ldb msg strings from python.

10 years agolibds: added recyclebin feature GUID
Andrew Tridgell [Thu, 11 Feb 2010 12:35:31 +0000 (23:35 +1100)]
libds: added recyclebin feature GUID

10 years agos3: re-run make samba3-idl.
Günther Deschner [Thu, 11 Feb 2010 12:32:44 +0000 (13:32 +0100)]
s3: re-run make samba3-idl.

Guenther

10 years agospoolss: allow to set server architecture via parametric option.
Günther Deschner [Thu, 11 Feb 2010 12:07:38 +0000 (13:07 +0100)]
spoolss: allow to set server architecture via parametric option.

This allows to set "spoolss:architecture = 'Windows x64'" for debugging purpose.

Guenther

10 years agos3-spoolss: implement spoolss_EnumJobs level 3.
Günther Deschner [Wed, 10 Feb 2010 23:44:06 +0000 (00:44 +0100)]
s3-spoolss: implement spoolss_EnumJobs level 3.

Level 3 has been added with NT 4.0 and Windows 7 (at least 64bit version) makes
use of it in order to display queued jobs. Windows 7 will *not* fall back to
level 2 if we just return WERR_UNKNOWN_LEVEL, instead there will be no printjobs
displayed at all.

Guenther

10 years agotestprogs: one more error code for spoolss test.
Günther Deschner [Thu, 11 Feb 2010 00:24:12 +0000 (01:24 +0100)]
testprogs: one more error code for spoolss test.

Guenther

10 years agotestprogs: print secdesc->Control in spoolss test.
Günther Deschner [Wed, 10 Feb 2010 23:06:20 +0000 (00:06 +0100)]
testprogs: print secdesc->Control in spoolss test.

Guenther

10 years agotestprogs: use ConvertSidToStringSid in order to print sids in spoolss test.
Günther Deschner [Wed, 10 Feb 2010 23:04:53 +0000 (00:04 +0100)]
testprogs: use ConvertSidToStringSid in order to print sids in spoolss test.

Guenther

10 years agos4-drs: Add DRSUAPI_DRS_NONGC_RO_REP bit to DRS_OPTIONS
Fernando J V da Silva [Fri, 5 Feb 2010 18:33:03 +0000 (16:33 -0200)]
s4-drs: Add DRSUAPI_DRS_NONGC_RO_REP bit to DRS_OPTIONS

Signed-off-by: Matthias Dieter Wallnöfer <mwallnoefer@yahoo.de>
10 years agos4-net-drs: fix some coding style issues
Andrew Tridgell [Thu, 11 Feb 2010 10:28:48 +0000 (21:28 +1100)]
s4-net-drs: fix some coding style issues

We should use the system/*.h headers for system includes. We also try
to avoid C++ comments.

Signed-off-by: Andrew Tridgell <tridge@samba.org>
10 years agos4/net_drs: 'net drs kcc' command implementation
Kamen Mazdrashki [Sat, 6 Feb 2010 01:13:33 +0000 (03:13 +0200)]
s4/net_drs: 'net drs kcc' command implementation

Signed-off-by: Andrew Tridgell <tridge@samba.org>
10 years agos4/net_drs: 'net drs bind' command implementation
Kamen Mazdrashki [Fri, 5 Feb 2010 20:36:36 +0000 (22:36 +0200)]
s4/net_drs: 'net drs bind' command implementation

Signed-off-by: Andrew Tridgell <tridge@samba.org>
10 years agos4/net_drs: 'net drs' utility initial creation
Kamen Mazdrashki [Fri, 5 Feb 2010 20:36:10 +0000 (22:36 +0200)]
s4/net_drs: 'net drs' utility initial creation

Signed-off-by: Andrew Tridgell <tridge@samba.org>
10 years agos4/idl: regenerating drsuapi.idl
Kamen Mazdrashki [Fri, 5 Feb 2010 20:37:54 +0000 (22:37 +0200)]
s4/idl: regenerating drsuapi.idl

Signed-off-by: Andrew Tridgell <tridge@samba.org>
10 years agos4/idl: Naming reserved flags for DRSUAPI_SUPPORTED_EXTENSION_ field
Kamen Mazdrashki [Fri, 5 Feb 2010 20:37:27 +0000 (22:37 +0200)]
s4/idl: Naming reserved flags for DRSUAPI_SUPPORTED_EXTENSION_ field

Signed-off-by: Andrew Tridgell <tridge@samba.org>
10 years agoprovision: Use short name for assignee of ACE (BA, SA, CO, ...)
Matthieu Patou [Tue, 26 Jan 2010 23:03:15 +0000 (02:03 +0300)]
provision: Use short name for assignee of ACE (BA, SA, CO, ...)

  Use short name (shortcut for wellknown SID/RID) for assignee in each entry of ACL (when possible)
  of sysvol files (GPO objects and netlogon folders).
  This avoid error prone substitution of DOMAINSID in ACL and make ACL clearer by using shortname
  for assignee accordingly with SDDL synthax rules. Translation to real SID is handled internaly by the
  from_sddl function.

Signed-off-by: Matthias Dieter Wallnöfer <mwallnoefer@yahoo.de>
10 years agopython-s4: use secrets.ldb instead of sam.ldb for reading domain SID
Matthieu Patou [Tue, 26 Jan 2010 22:32:29 +0000 (01:32 +0300)]
python-s4: use secrets.ldb instead of sam.ldb for reading domain SID

  This allow to be able to run net acl set xxx yyy on DC, but also on domain
  member.

Signed-off-by: Matthias Dieter Wallnöfer <mwallnoefer@yahoo.de>
10 years agoprovision: Fix an error with eadb when using not default install dir and running...
Matthieu Patou [Mon, 8 Feb 2010 12:36:07 +0000 (15:36 +0300)]
provision: Fix an error with eadb when using not default install dir and running as a non root user

Signed-off-by: Matthias Dieter Wallnöfer <mwallnoefer@yahoo.de>
10 years agos4-dns: don't leave behind a tmp file
Andrew Tridgell [Thu, 11 Feb 2010 09:49:29 +0000 (20:49 +1100)]
s4-dns: don't leave behind a tmp file

If the dns update file doesn't need updating we need to delete the tmp
file

10 years agos4-selftest: don't run rndc reload in selftest
Andrew Tridgell [Thu, 11 Feb 2010 09:48:47 +0000 (20:48 +1100)]
s4-selftest: don't run rndc reload in selftest

We don't want rndc calls on the build farm

10 years agos4-dns: added a dns update task
Andrew Tridgell [Thu, 11 Feb 2010 09:21:15 +0000 (20:21 +1100)]
s4-dns: added a dns update task

This task watches for changes in the list of DCs, and creates a bind9
formatted file that grants update permission to all DCs, plus to the
administration, and machines update for their own names.

Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>

10 years agos4-provision: cope with umask in creating private/dns
Andrew Tridgell [Thu, 11 Feb 2010 09:20:11 +0000 (20:20 +1100)]
s4-provision: cope with umask in creating private/dns

10 years agoutil: added file_compare() utility function
Andrew Tridgell [Thu, 11 Feb 2010 09:19:40 +0000 (20:19 +1100)]
util: added file_compare() utility function

file_compare() returns true if two files are the same. It is meant for
small files.

Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>